Certificates for Office 365 Hybrid Exchange 2010 Exchange Online v15

Certificates for Office 365 Hybrid Exchange 2010 Exchange Online v15
We need to set up a hybrid server to allow us to begin moving mailboxes to Exchange Online. We created a new Server 2012 R2 server with Exchange 2013 SP1 to act as our Hybrid server. Reading the literature leaves me with questions about what
certificates I need. My understanding is that the certificates in play on the on-premise Exchange 2010 servers don't need to be changed.
I've looked at the TechNet article "Certificate requirements for hybrid deployments"
http://technet.microsoft.com/en-us/library/hh563848(v=exchg.150).aspx
Certificate requirements for the new Exchange 2013 SP1 server are still unclear to me, I think the new server needs a SAN certificate with:
Hybridserver.domain.edu
autodiscover.domain.edu
EWS.domain.edu
Can anyone clarify?

Cert is required only if you want to deploy ADFS for SSO.
Otherwise you can use your existing Cert for all the Services
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

Configure rmg 2010 published sites for office 365 hybrid

Tmg 2010 publishing all exchange services I am using the same servers for hybrid office 365 and I am not ablet to migrate from cloud to onpremise
What listener should I create for ews and autodiscover to work
Wants is required on TMG

Hi and thanks for the reply, sorry for the typo
i am doing this setup @ a customer site and they already published all exchange web services as OWA, active sync through TMG
now i am not able to understand what i need to change in TMG to make things work 100%
i have already followed this like to make the HCW work and it did it
http://community.office365.com/en-us/w/exchange/1042.how-to-configure-tmg-for-office-365-exchange-hybrid-deployments.aspx
now the only issue i am facing now is migrating a mailbox from office 365 back to on premise
i get this error related to authentication
The call to 'https://link/EWS/mrsproxy.svc' failed. Error details: The HTTP request is unauthorized with c
lient authentication scheme 'Negotiate'. The authentication header received from the server was 'NTLM,Negotiate,Basic r
ealm="webmail.srmcc.net"'. --> The remote server returned an error: (401) Unauthorized..
    + CategoryInfo          : NotSpecified: (:) [New-MoveRequest], RemoteTransientException
    + FullyQualifiedErrorId : [Server=AMSPR01MB215,RequestId=1c6b5a8f-5a17-4611-8388-5895a553c6ff,TimeStamp=4/15/2014
   5:39:46 PM] [FailureCategory=Cmdlet-RemoteTransientException] 47950287,Microsoft.Exchange.Management.RecipientTask
s.NewMoveRequest
now i found this link that i want to share with you and to confirm it is the solution, also if it is i need to know some details on how to apply it
http://blog.mygeeklab.com/2012/01/24/office-365-tmg2010-and-ews/
currently there are 3 FW polices publishing OWA, Active Sync and outlook anywhere
all of them are using the same listener -authentication is NTLM form based authentication / validation method is windows active directory
ports for the listener is http / https !
all FW polices for publishing the above 3 uses basic authentication except for the OWA uses NTLM authentication
and all of them don't have the "but clients my authenticate directly delegation" settings
please note i am not a pro in TMG i am an office 365 and exchange guy ! so please i really need your help to get this through since it is stopping my work
regards

Office 365 Hybrid Setup With Exchange 2010

I have onpremis exchange 2010 which is configured as hybrid with o365.some of my users are in o365 cloud.Now when im checking on the o365 admin portal dns settings, its saying we need to add some dns records in my public dns hoster.But since im having hybrid
setup, i cant understand that thing.
Darshana Jayathilake

Hi Darshana,
Since your question is more related to Office 365, I'd recommend you post it to the Office 365 Community forum:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Certificate configuring for exchange 2013 and office 365 hybrid deployment

Please advise on what digital certificate requirements for hybrid deployment and to configure it.

Hi sphilip,
If you want to deploy AD FS with Single Sign-On(SSO), we need use certificate to establish secure trust between on-premises Exchange 2013 and Office online.
We can use and configure a trusted third-part CA within all on-premises Exchange 2013 Mailbox and Client Access servers to ensure secure mail transport, more details about
Office 365 Hybrid Configuration Certificate Planning, for your reference:
http://blogs.technet.com/b/neiljohn/archive/2011/08/25/office-365-hybrid-configuration-certificate-planning-adfs-exchange-web-services-owa-oa.aspx
Best Regards,
Allen Wang

API for office 365

Hi,
I'm looking to access Office 365 mail, calendar, contacts.
Is there are REST API available for this?
I found I can use SOAP, but when authenticating against https://outlook.office365.com/EWS/Exchange.asmx I'm not getting anything.
Is there anything specific settings in Office 365 that needs to be enabled? I'm not developing an app for office 365. Simply want to push and pull data from Office 365 using stateless web calls without library. For reference I'm using Python.
I appreciate any help or references. Thanks!
Andrew

HI, thanks for the response.
I just have one question, maybe you can help me out with, I would really appreciate it.
Do I have to setup a special account such as an app developer account or is web authentication via the Office 365 user and password sufficient?
Thanks in advance!

Z10 and Q10 frequently asking for Office 365 password

I have an AT&T Z10, and a client has a Verizon Z10 and 2 Verizon Q10s. Both of us use Office 365 as our email service. With the lack of BB10 support in BBCS (Blackberry Cloud Service for Office 365) I was forced to set up all these devices on ActiveSync. For the most part this is working OK. However each user has either been prompted for the Office 365 password multiple times in a day, or they don't notice the prompt and the ActiveSync account is marked as invalid on the Accounts list in setup.
I have looked everywhere within the Office 365 administration console and can find nothing related to asking for the password frequently. I did find settings to control if the device has a password, but nothing related to the device prompting for the Exchange password.
I am only annoyed by it, but my client is getting quite frustrated and is questioning whether they will bother upgrading their other 20 Blackberry devices to BB10s, or look at other devices. Either some direction to solve this ActiveSync problem, or a likely date for BBCS to be BES10 would be helpful.

My user with a Q10 has had this same issue with our Office 365 account. Seems to work fine for a few days then randomly stops getting new email. Go in and reenter his Office 365 password and all is well again... for a few days when it seems to lose it again.
We have about 15 iPhone's of various flavor and 3 Android HTC One's with no issues on O365.

Announcing new activity logging and reporting capabilities for Office 365

Announcing new activity logging and reporting capabilities for Office 365We are pleased to announce the rollout of new activity logging and reporting capabilities for Office 365, including the Office 365 activity report, comprehensive logging capability, PowerShell command or cmdlet and a preview of the Office 365 Management Activity API.Thisnew capability provides you increased transparency, allowing you to monitor and investigate actions taken on your data, and comply with laws and regulations.Office 365 activity reportThe Office 365 activity report enables you to investigate a user’s activity by searching for a user, file or other resource across SharePoint Online, One Drive for Business, Exchange Online and Azure Active Directory, and then download the activities to a CSV (comma separate values) file. You can filter by date range,...
This topic first appeared in the Spiceworks Community

Hi,
Do you have any specific questions? We'll certainly try to help you, but we won't do your homework for you. That wouldn't help you learn at all.
I recommend looking over the learning materials here, they're quite good for getting started with PowerShell:
http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Install Project Pro 2013 and Project Pro for Office 365

Does anyone know if they can be installed side-by-side? From what I can tell it looks like they cannot be installed side-by-side. For example I have a trial version of Project Pro installed, so there's no link in the Start Menu for Project Pro for Office
365...
Is there something missing?
Thanks,
Roland

Hi Roland,
I'm not sure I follow your comment "there's no link in the Start Menu for Project Pro for Office 365". I successfully ran Project 2010 (MSI) alongside a trial of Project Pro for Office 365.
Why do you wish to run both side by side? Have you considered installing one into a virtual machine?

How to delete duplicate attribute in on premise server for office 365 dir sync tool

Hi,
Please anyone help to how to remove duplicate attribute in on premise server for office 365 dir sync tool .
While running the dirsync tool iam getting the below error :
"Unable to update this object because the following attributes associated with this object have values that may already be associated with another object in your local directory services: [ProxyAddresses smtp:[email protected],SMTP:[email protected];].
Correct or remove the duplicate values in your local directory. Please refer to http://support.microsoft.com/kb/2647098 for more information on identifying objects with duplicate attribute value"
Still i am troubleshooting to reslove this problem . I have run the ID Fix tool there i could see some 10 duplicate errors . Next what should i do , please anyone help me to find it
Thanks.....

Hi,
Please anyone help to how to remove duplicate attribute in on premise server for office 365 dir sync tool .
While running the dirsync tool iam getting the below error :
"Unable to update this object because the following attributes associated with this object have values that may already be associated with another object in your local directory services: [ProxyAddresses smtp:[email protected],SMTP:[email protected];].
Correct or remove the duplicate values in your local directory. Please refer to http://support.microsoft.com/kb/2647098 for more information on identifying objects with duplicate attribute value"
Still i am troubleshooting to reslove this problem . I have run the ID Fix tool there i could see some 10 duplicate errors . Next what should i do , please anyone help me to find it
Thanks.....

PowerShell for Office 365 is here – here's how to use it

After announcing its intention to release new scripts and commands to better integrate PowerShell with Office 365,Microsoft has followed through.The newly ordained PowerShell for Office 365 features the same command-line interface found in PowerShell 5.0 – and that's because it is the same program.According to The Register, Microsoft has created "ascript libraryto help you do things like add users, control licenses, and stop people from recording Skype meetings."Before you start using it, however, you have to "import the modules corresponding to all the bits of Office 365 you want to administer, including the Microsoft Online Services Sign-in Assistant and the Azure Active Directory Module to handle the important matters of security and authentication."The widespread use of PowerShell and its necessity for sysadmins and network admins...
This topic first appeared in the Spiceworks Community

Hi, almightywiz,
Sorry for the delayed response. I was away from office for one day and did not have access to the files.
And you are right, column 11 is text and column 26 is date (i.e., numeric). And indeed, those visually blank cell in column 11 are not null but have zero length. Java can tell the difference but not by visually inspecting the cells in the spreadsheet.
I also checked the POI API documents, and found that org.apache.poi.ss.usermodel.Cell interface, which has those cell types, is implemented by both HSSFCell and XSSFCell. The question is under what condition the cell type of a cell becomes Cell.CELL_TYPE_BLANK.
While that is not yet clear, I will catch cells missing data in column 11 by checking three things: first check if(cell == null), then if(cell.getCellType() != Cell.CELL_TYPE_STRING), and then if(cell.getStringCellValue().length() == 0). And that solves my problem.
Thank you so much for sharing your experience and solving my problem.
I have another problem that may more serious, at Can I process Excel BIFF5 files, or simply abandon Apache POI? It would be very much appreciated if you had time to look at it.
Best regards,
Newman

"project pro for office 365

I was eagerly looking for a project management software and fortunately came across your office project pro 365 product
While looking up on the website office, I had some questions rising concerning
the “project pro for office 365” – 25 dollars/per user/ per month option
It is mentioned that it can be installed on up to 5 pcs.
Here are some questions I would like you to answer to help my purchase. (FYI I am planning to share this software with a team of 5 people)
Does that mean that if I pay 25 dollars, me and my other 4 team mates will have equal access and manipulation of the software(insert/edit)?
Or is it only one person getting some sort of ID and password that give access to Cloud and other 4 people just having the right to view the files(such as Gantt chart etc.)
I was informed that if I go with this option I will have to take
“project online” to have a cloud subscription(extra 33dollars). Is that correct?
If a get an ID and Password, will it be on a single designated PC or doesn’t it matter far as it is among the 5 pcs where the software is installed?
Do you have any other options to recommend considering we are a group of 5 people and want at least 2 people to have the right to have access to the software and be able to write or edit while the other 3 members can view the
shared files of charts?
Thank you for your answer in advance!

However, to answer the questions...
1. That is upto 5 PCs for a single user, not spread across multiple users.
2. One user gets one ID.
3. No, Project Online is a separate product.
4. It doesn't matter. You can log into one of 5 PCs and install Project Pro for 0365. If you no longer have access to a PC, you can "de-activate" it using the web, and then install on another.
5. Buy 5 licences.
Ben Howard [MVP] | web |
blog |
book | P2O

Custom Site MailBox for Office 365 SharePoint 2013 online

Is it possible to create programmatically create site mailbox for Office 365 SharePoint 2013 online?
How to customize site mailbox email address like [email protected]

Hi,
In SharePoint 2013 Online, if you want to sync document library with local drive, you can use OneDrive to achieve it.
http://office.microsoft.com/en-001/support/sync-onedrive-for-business-or-sharepoint-site-libraries-to-your-computer-HA102832401.aspx
Best Regards
Dennis Guo
TechNet Community Support

How to Enable Ratings on SharePoint List using Client Object Model for Office 365 SharePoint Site.

How to Enable Ratings on SharePoint List using Client Object Model code for Office 365 SharePoint Site.
Thanks in Advance
Rajendra K

Hi Rajendra,
here you are the code and the blog, let me know if this helps
using (ClientContext ctx = new ClientContext(https://yourSiteUrl))
Web w = ctx.Web;
List l = w.Lists.GetByTitle("yourListName");
ctx.Load(l, info => info.Id);
ctx.ExecuteQuery();
string ListID = l.Id.ToString();
Microsoft.Office.Server.ReputationModel.Reputation.SetRating(ctx, ListID, 1, 5);
ctx.ExecuteQuery();
http://blogs.technet.com/b/speschka/archive/2013/07/08/how-to-use-csom-with-ratings-in-sharepoint-2013.aspx
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

Where are stored the data settings of Project Pro for Office 365?

Hi,
I'm using Project Pro for Office 365 connected to Project Online. Where are stored the settings we saved in
File / Options (Project Pro). I'm thinking of roaming users.
Thanks

I believe it is stored in the registry setting:
HKey_Current_User\Software\Microsoft\Office\15.0\MS Project\Options
Julie

Looking for SharePoint Project Management Solution for Office 365 - Risk,Issues,budget

Hi All,
I'm looking for a Project Management solution plugin like PM Central below for office 365 cloud
http://store.bamboosolutions.com/BambooMainWeb/pmc-tryit.aspx
Looking to get more resources and links
Thanks in advance

Hi Patrick,
There are many project management apps for SharePoint Online. Such as Project Management, EPM Pulse for Project Online and so on.
Here is the office store URL , you can choose an appropriate app and add it into your SharePoint Online:
http://office.microsoft.com/en-us/store/results.aspx?qu=project&avg=osu150&vtags=Project%20Management
Best Regards,
Eric
Eric Tao
TechNet Community Support

Certificates for Office 365 Hybrid Exchange 2010 Exchange Online v15

Similar Messages

Maybe you are looking for