Certificates problems and images not loading

i did a fresh install of the firefox v24 on my windows 7 ultimate 64bit desktop. after installation im getting certificate security issues for almost all websites even for the firstrun page. I cannot install any websites from addon wesite because firefox says this "services.addons.mozilla.org uses an invalid security certificate." and im not able add exceptions.
If i open Facebook, only the html part is loading. No CSS or images. Please help me wtih this issue

The issue isn't resolved.... i tried doing a clean install... created number of new profiles using profilemanager.... but its the same....im attaching some screenshots of how facebook is opening in a clean install and new profile

Similar Messages

Safari not loading smoothly and images not loading at all on some sites

Hi, for the past few days Safari has started to load very slowly and on certain sites Amazon & Mark & Spencers for example it takes ages to load and then once loaded no images are displayed. Blue ? mark...
I have searched through the pages and tried resetting, unchecking etc etc Re installed flash to no avail
Can anyone help me? Driving me insane!!

If you have the Develop menu enabled, click Develop from the Safari menu bar. From the drop down menu if there is a check mark nex to Disable Images, click there once to disable.
If that isn't the issue, try troubleshooting plugins and extensions.
From your Safari menu bar click Safari > Preferences then select the Security tab.
Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not a plug-in issue, select the Extensions tab. If there are any extensions installed, turn that OFF, quit and relaunch Safari to test. If that made a difference, uninstall one at a time, quit and relaunch Safari to test.

Safari and Firefox not loading images

Recently I worked on somebody's MacBook Pro computer (a few months old but software is kept up to date) but I couldn't figure out why Safari and Firefox often would not show images. This person also has a desktop PC computer with the same problem in Internet Explorer. The mac laptop is connected to the internet via wireless and the desktop is wired to a Netgear router. The router is connected to a Motorolla Surfboard 5100 cable modem. The problem started about on the 16th of March. When I tried to open a page in Safari often half of the pictures did not show. In Firefox when I clicked the broken picture icon and selected 'show picture' then it will load. Also, in both browers, clicking refresh will usually, but not always, reload everything correctly. Clicking refresh does the same on the PC in Internet Explorer.
Safari showed on the status bar there were errors on the page so I opened the Activity window. It said 'failed to connect' or something like that (I don't have the computer in front of me) for the images that did not load. Oddly, not all the images from the same site fail to load. Some will load but others won't. This happened with most sites and it appears to be random.
I opened a terminal window and typed netstat. With no browser running there were still several connections. I'm not sure if that matters on a Mac in OS X. On a windows computer if there are several connections and no programs are open then there may be a problem with malware.
It is possible the problem with images not loading has nothing to do with the Mac or Safari since we are having the same problem with the PC. The view images option in all 3 browsers is checked. I tried taking the router out and connecting only the PC to the cable modem. I tried unplugging and replugging all the ethernet cables. The owner of the computers spent a few hours on the phone with her internet provider. In the end they couldn't find what was causing the problem and tech support told her the internet was slow sometimes. We have the same internet provider and I'm having no problems with images on the same sites I viewed on her computer.
Any ideas?

Before somebody asks- yes, I tried clearing the cache

HELP! Images not loading and Firefox taskbar icon is a white file.

I went through all the suggestions in the image not loading help page and same with the add ins and nothing helping. The images load fine on Google Chrome so I know it's not the site. It might just be Adobe Flash images, but that's as far as I know how to pinpoint.
As far as the task bar goes, it's just a while file icon instead of the Firefox one. It doesn't bother me, but I just thought it might be related.
I'd appreciate any help! Anybody! Thanks,
Stef

What do you see if you right-click the area where such a missing image should be?
Is that a context menu for images with "View Image Info"?
Are there any icons on the location bar that plugins are used or mixed content is blocked?
If images are missing then check that you do not block images from some domains.
*Press the F10 key or tap the Alt key to bring up the hidden Menu bar.
Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
Check "Tools > Page Info > Media" for blocked images
*Select the first image link and use the cursor Down key to scroll through the list.
*If an image in the list is grayed and "Block Images from..." has a checkmark then remove this checkmark to unblock images from this domain.
Make sure that you do not block (third-party) images, the permissions.default.image pref on the about:config page should be 1.
Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*http://kb.mozillazine.org/Websites_look_wrong

I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post wont work as it

I still am having problems with Aperture not loading, It just refuses to work, and I get the message saying it has encountered a problem, and I may need to re-install which I have done dozens of times. The fix mentioned on an earlier post doesn't work as it is for Ver 10.6.6 and I am running 10.6.7

Do you have Final Cut installed on your machine?
If so, you may want to look at this article: http://support.apple.com/kb/TS3528
Let us know if that helps.

HT201412 My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

This is an iPad user to user forum, so you are not addressing Apple. Depending on how many user helpers are on-line, it may take several hours, or longer, to get a response.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

CR files will no longer show in bridge and will not load into PS

Hi I had a problem with bridge CS6 dynamic link failing and had tech support finally help with the problem by phone They had me reinstall PSCS6 and Bridge among other things like setting the permissions differenty. It worked ok when I opened it again after those changes and then I closed the apps and opened them again the next day (today) but now the CR files will show no thumbnails nor previews in bridge and will not load into PSCS6.
I get now the following error messages
These are files that are on my system and not from a camera plugged into the computer. They had worked just fine before the reinstall and permisisons changes the tech had me do. They open in the preview app and look fine so I know they are not corrupted files and I have tried different saved versions of the same (or any other CR file) and none of them will now open and Camera raw itself seems no where to be found. My prefences in camera raw have not clanged. Any ideas??? thanks and aloha, UP
I tried image processor in bridge to make them PS files and got the following error message.
I tried to load one of the CR files from the finder dirretly and got the following error message.
Any help would be appreciated. If the post goes inanswered I will call tech support again. aloha UP

HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

How can I end this annoying problem of YouTube not loading?

Hello y'all!
Relatively new to the Mac world here, so go easy on me! How can I end once and for all, this problem with YouTube not loading in Safari and not being able to watch embeded videos? I've read various "fixes" and have tried them all, and nothing seems to work. Help!! Thanks!

We have no way of knowing exactly which "fixes" you are referring to...
Try deleting Flash cookies. http://machacks.tv/2009/01/27/flushapp-flash-cookie-removal-tool-for-os-x/
Try uninstalling then reinstalling the Flash plugin. http://kb2.adobe.com/cps/865/cpsid_86551.html#ostype=m,prob1=fnctn,prob2=game,
Your profile shows you are running v10.6.7. Of that is correct, update your software. Click your Apple menu (top left in your screen) then click Software Update...
Repair Permissions using Disk Utility. /Applications/Utilities

Have a problem ... not loaded project. Premier pro has encoutered an error [f:\ppro603_Win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe/k] }

Have a problem ... not loaded project. working on it for 8 months. never was nothing like this either with him or with other projects. When you load a project Premier generates an error .{ Premier pro has encoutered an error [f:\ppro603_Win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe/k] } Create the eve autosave project also not loaded. When I sav'd the project for the last time about the Premiere pro me warned about any problems and save projects without any problems. It is only one thing was unusual in the program - the timeline when switching between sikventsy constantly dropped as user's settings. And as usual. I tried to load the project from another computer. Import the project into the after Effects . import the project into a new project about Premier pro. But it did not solve the problem. all the time the error. Please help, a lot of work in this project. This is a great betrayal of the Premier pro...

Hi Pochtawood,
Yes, uninstalling iCloud will allow you to create new projects.
For legacy projects, you can repair them with a patch created by a user.
Details and links to the patch are here: Re: Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe
Thanks,
Kevin

Images not loading when I visit a website. I I get is a blank box with a question mark in it. How do I fix this?

Images not loading on my browser in Safari or Google Chrome or Firefox when I visit a website. How do I fix this?

Can you run EtreCheck and post the report here please?
EtreCheck: https://discussions.apple.com/docs/DOC-6173

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I'm sorry no-one has answered you yet - I'm afraid I don't know the answer to the question: but I wanted to put into your mind that starting up with AppleWorks at this stage isn't a good idea. The program was 'end-of-lifed' years ago, it won't run on Lion, and some of the document types created in it - Databases in particular - cannot be opened at all by any other program whatever. Word Processing documents can be opened in Pages, and Spreadsheets in Numbers (with some reservations in both cases), but building up a collection of AppleWorks documents at this stage is going to lead to problems later on.
It's difficult to know what to recommend for a PowerPC machine that would still be compatible with modern ones. An older version of Microsoft Office, perhaps, if you can find one which will run on PPC; but most of the modern Word Processors are Intel only. This is something you would need to investigate.

LR4 opens as lr2 and images not found

LR4 opens as lr2 and images not found, can anyone help me please, I'm hopeless.
LR4 just uploaded as upgrade.

Thanks dj, what happens is when I click on the LR4 shortcut LR4 window starts to open, flashes momentarily as LR4 then buggers off before fully opening my old LR2.
I have removed the LR4 installed yesterday, and reinstalled, but same problem. Also the installation process now seems to never stop cycling. It goes through the full installion cycle, then starts/repeats again. I have followed the prompts and run through it 3 times before giving up.
Any more clues on what I have done wrong, or now need t do please.

My macbook pro loads webpages fine for the first few minutes but after that the internet freezes and will not load anymore webpages. What can I do to fix this?

My macbook pro loads webpages fine for the first few minutes but after that the internet freezes and will not load anymore webpages. What can I do to fix this?

I let Firefox sit on my desktop for about five minutes, and it finall allowed me to use it. That is EXTREEEMELY slow. What is the problem?

Could not load iCloud preference pane and could not load internet accounts preference pane

after a recent not so succesful time machine restore, and after turning internal hard drive and ssd on my macbook pro late 2008 into a fusion drive, I get these error messages in the system preference : could not load iCloud preference pane and could not load internet accounts preference pane. I noted that Mail, Calendar, notes etc all sync to my various device, but on my mac, I can't access the accounts feature. Can anyone help me resolve this issue ? I searched all over the net with no success...
cheers !

iMac (Processor 3.2GHz, 8GB 1600MHz DDR3, 3TB HD) Running Mavericks (10.9.4), I have the exact same problem. Local Apple Store unable to help. Turned to my AppleCare Program. They say their techs have never come across this issue this was what was done:
Have downloaded & new copy of OS X = same issue.
Deleted OS X Reinstalled OS X on blank drive - restored all my data from backup = now have no MS Office, no Adobe Photoshop Elements, no iWeb, no Parallels, no VMWare, no iPhoto in fact, nothing of "my" machine. (but problem is still there)
Advised to do an "Internet Restore" from good Backup (over 24 hours to complete); when complete, machine restarts = a circle with a cross diagonally through it and the spinning wheel. (It goes no further no matter how many times you reboot)
Now on my own, booted using "Command + R" to start in Recovery mode. Changed all permissions in Disk Utility. Rebooted. = my machine is back - all data intact and all programs there & working BUT problem persists.
I have now turned to Communities. Followed everything people said worked for them but in my case, after a reboot, I still cannot load iCloud OR Internet Accounts Preferences panes!!
If I add a calendar item on my iMac it will not sync with either my iPad or iPhone. If I add a calendar item on either my iPhone or my iPad that item will sync with the other device but will not sync to my iMac. The same is true for Contacts as well. Extremely annoying to have to type it in all the time. This is Apple for heavens sake and therefore it should work!!

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
This is a new problem and was not the case before.

Works perfectly fine for me with the latest Reader version (11.0.09).
You write that it worked "before"; before what? An update? Update from what version to what version?

Certificates problems and images not loading

Similar Messages

Maybe you are looking for