Certification for fi in Ecc 6.0

Hi
This is Amar i need some healp for certification, now i am doint certification for FI in Ecc 6.0.
some of them is saying most of the qustion will come from the dum qusation papers, so where can i fine
thouse dum-qusation papers. is possiable send ULR link.
Thanks,
Amar

Please go through the curriculum below:
https://training.sap.com/us/en/certification/c_tfin52_64-sap-certified-application-associate-financial-accounting-with-sap-erp-60-ehp4-g/#related-curricula
It is just not one book, you should go through all the books, at least not less than 5 times.
You must read
SAP129
SM001
TERP01
TERP21
TFIN50
TFIN52
https://training.sap.com/us/en/curriculum/fin_05_fi_acc_sol-solution-consultant-financials-financial-accounting-g-en
Thanks and Regards,
Ravi

Similar Messages

Sap FICO Certification for Financial Accounting with mySAP ERP 2005

Hi,
I would like to write SAP-FICO Certification for Financial Accounting with mySAP ERP 2005
Topic areas:
SAP overview, Financial Accounting Master Data, Document and Posting Control,Special General Ledger Transactions, Document Parking, Substitution and Validation ,Payment Program, Dunning Program, Correspondence, Interest Calculation,Evaluation Options in Reporting ,Closing Operations in Financial Accounting ,Asset Accounting,The New General Ledger,SAP Solution Manager.
If anyone have the Material for above topics, please send me my mail Id: [email protected]
if anyone appeared recently for certification for the same code, please send model questions and answers.
i will be very thankfull to you.
Regards,
Satyaprakash

Hi
I am also writing SAP-FICO Certification for Financial Accounting with mySAP ERP 2005.
Request you to send me whatever the material you have in this regard.
thanking you in advance
Suri

SAP Business One 8.8 Certification for Application associate

Hi all,
I wanted to know about SAP Business One 8.8. Certification for Application associate.
1 )What would be the fee
2)What are minimum requirements to get certification
3)How much useful is this certificate compared SAP R/3 certification
Regards
Darshan Desai

For all these questions go to
https://websmp204.sap-ag.de/~form/handler?_APP=00200682500000002702&_EVENT=DISPLAY&_HIER_KEY=201100035870000001783&_HIER_KEY=301100035870000002834&_HIER_KEY=501100035870000019706&_HIER_KEY=601100035870000248281&_HIER_KEY=601100035870000248571&

CRYSTAL REPORT FOR ENTERPRISE ON ECC

Hi Everyone,
I have been trying to connect Crystal Report for Enterprise over ECC via universe as we don't have option
to connect CR4E directly to ECC.
So, I have made a universe in IDT and published it in repository.
Now, when I am using that universe in WebI Report and DashBoard then it is working fine but the same is throwing
the error while I am trying to connect with CR4E 'Failed to execute query: 'Fail to create an instance of Job : com/businessobjects/i18n/locale/BoLocale'.
The same error 'Fail to create an instance of Job : com/businessobjects/i18n/locale/BoLocale' was also coming when we try to save the IDT with Secure Connections is set to Server Middleware(Window -> Preferences->Information Design Tool ->Secured Connections ->Server Middleware).
Regards,
Raghwendra

Hi,
As per the SAP Note 2022008 - Crystal Reports for Enterprise gives error with ERP Universe this is is the bug in
SAP Crystal Reports for Enterprise 4.1 Support Pack 3 Patch 1
SAP BusinessObjects Business Intelligence Platform 4.1 Support Pack 3 Patch 1
This issue has been reproduced at SAP and is found to be a bug (ADAPT01725424).
Solution
This issue has been fixed with BI 4.1 SP3 Patch3.
Regards,
Amit

How can we suggest a new DBA OCE certification for very large databases?

How can we suggest a new DBA OCE certification for very large databases?
What web site, or what phone number can we call to suggest creating a VLDB OCE certification.
The largest databases that I have ever worked with barely over 1 Trillion Bytes.
Some people told me that the results of being a DBA totally change when you have a VERY LARGE DATABASE.
I could guess that maybe some of the following topics of how to configure might be on it,
* Partitioning
* parallel
* bigger block size - DSS vs OLTP
* etc
Where could I send in a recommendation?
Thanks Roger

I wish there were some details about the OCE data warehousing.
Look at the topics for 1Z0-515. Assume that the 'lightweight' topics will go (like Best Practices) and that there will be more technical topics added.
Oracle Database 11g Data Warehousing Essentials | Oracle Certification Exam
Overview of Data Warehousing
Describe the benefits of a data warehouse
Describe the technical characteristics of a data warehouse
Describe the Oracle Database structures used primarily by a data warehouse
Explain the use of materialized views
Implement Database Resource Manager to control resource usage
Identify and explain the benefits provided by standard Oracle Database 11g enhancements for a data warehouse
Parallelism
Explain how the Oracle optimizer determines the degree of parallelism
Configure parallelism
Explain how parallelism and partitioning work together
Partitioning
Describe types of partitioning
Describe the benefits of partitioning
Implement partition-wise joins
Result Cache
Describe how the SQL Result Cache operates
Identify the scenarios which benefit the most from Result Set Caching
OLAP
Explain how Oracle OLAP delivers high performance
Describe how applications can access data stored in Oracle OLAP cubes
Advanced Compression
Explain the benefits provided by Advanced Compression
Explain how Advanced Compression operates
Describe how Advanced Compression interacts with other Oracle options and utilities
Data integration
Explain Oracle's overall approach to data integration
Describe the benefits provided by ODI
Differentiate the components of ODI
Create integration data flows with ODI
Ensure data quality with OWB
Explain the concept and use of real-time data integration
Describe the architecture of Oracle's data integration solutions
Data mining and analysis
Describe the components of Oracle's Data Mining option
Describe the analytical functions provided by Oracle Data Mining
Identify use cases that can benefit from Oracle Data Mining
Identify which Oracle products use Oracle Data Mining
Sizing
Properly size all resources to be used in a data warehouse configuration
Exadata
Describe the architecture of the Sun Oracle Database Machine
Describe configuration options for an Exadata Storage Server
Explain the advantages provided by the Exadata Storage Server
Best practices for performance
Employ best practices to load incremental data into a data warehouse
Employ best practices for using Oracle features to implement high performance data warehouses

Any certification for wd abap?

Hi experts,
I like to know whether there is any certification particularly for webdynpro abap.
If yes, then wat is the preferred book or material for that one and the eligibility criteria for that one. If possible explain me abt the certification in wd abap.
Regards,
Arun.

Hi Heidi,
I want to do certification individually, how can i do it and can u suggest me the material for the same.
As per ur reply i came to know there is a separate certification for wd abap.
I know there is a material named net310 is available for wd abap.
regards...
Arun.

Defaults for IT0016 for China in ECC 6.0 Version

Hi Friends,
Greetings to All !!
I have a requirement to default the values (Contract Type, Probationary period, EE & ER Notice Period) in IT0016 for China in ECC 6.0 Version. We tried to create these defaults through CONTR feature, but failed to achieve the solution.
Actually, MP001600 screen is been replaced by MP321100 for China in the upgraded version of ECC by SAP.
Could anyone help us with the solution, how to create defaults for this infotype 16 for China in ECC 6.0 (for screen MP321100)....
Thanks in Advance,
Regards,
P Sai Narayana

Yes Mr. Kumarpal,
SAP has provided new screen MP321100 for China in ECC 6.0. If you want further details, please check in the SAP Note 1286584.
Because of this new change, CONTR feature is not working properly, as expected for china. Please find the details of the Note below.
SAP Note 1286584 - CN IT0016: Old Notice Period Information Are Not Displayed
Summary
Symptom
After the legal change for China New Labor Contract Law, the Contract
Element Infotype (IT 0016) for China start using a new screen. The
Employer/Employee Notice Period fields are chaged to number and unit input
instead of the old code/description input. This is required for payment in
lieu of notice calculation.
The old fields are no longer displayed in IT 0016 for China. However
customer had maintained information in the old notice period fields might
need them as a reference to update the new fields.
More Terms
Notice period, IT0016, Contract Management
Cause and Prerequisites
This is an enhancement of the screen.
Solution
Apply the HR support package or the correction instruction of this note.
The old notice period fieds (P0016-KDGFR and P0016-KDGF2) are drawn on the
screen as invisible fields. Customer can update the setting in maintenance
view V_T588M for module pool MP321100 to set the fields as "Optional
Fields". Thus these two fields can be shown on IT 0016 screen.
Thanks,
Sai
SAP HR Consultant

Plz suggest some documents for ABAP in ECC 6.0.

Hello,
Could u plz suggest some documents for ABAP in ECC 6.0.
Regards,
Vibhuti

Hi,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
Thanks,
Sankar M

Alternative tcode for AL02 in ECC 6.0

Hi All,
AL02 is a tcode in 4.7, its obsolete in ECC 6.0 . i want the alternate tcode for this in ECC 6.0.
can u suggest me some process to find such alternative tcodes for the obsolete one in the higher versions.

Hi Nasreen,
The new Tcode for AL02 is RZ20 in ECC 6.0
Check this Wiki for the list of old and new Tcodes:
https://wiki.sdn.sap.com/wiki/display/ERP6/TransactionsChangedinECC6.0
Regards,
Chandra Sekhar

Performance Tuning Certification for Application Developer

Hi,
Can you please advise if there is any Oracle Performance Tuning certification for an Application Developer and Oracle 9i to 10G migration certification? If yes, can you please let me know its Oracle examination number?
I have already passed 1Z0-007 and 1Z0-147 in Oct 2008.
Thanks in advance,
Sandeep Kumar

... if there is any Oracle Performance Tuning certification for an Application Developer ...There is no performance tuning related certification for application developers. There is one for the DBA track.
Also -- to answer your question in the other thread:
So to clear this certification do I need to re-appear all the 3 exams as they were given in 2008 or just 1Z0-146 is enough.Having passed 1Z0-007 and 1Z0-147, if you pass 1Z0-046, you will gain the certification: Oracle Advanced PL/SQL Developer Certified Professional

FI content for IS based ECC backend

Is the FI business content the same as the regular R/3 business content if the source system is a IS (Industry specific- for exampe-retail) ECC SAP system. The reason i ask is the BI business content contains specific IS related cubes, Data sourses etc for Sales, Inventory etc but i dont see any FI related content under that
Thanks

Hi,
Cross-Application Components -> Financial.
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/65/7beb3cad744026e10000000a11405a/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/html/BW/FinancialAccounting.htm
http://www.sapgenie.com/sapfunc/fi.htm
http://www.sap-img.com/sap-download/sap-tables.zip
for tables check out link
http://www.sapgenie.com/abap/tables_fi.htm
http://www.sap-img.com/sap-fi.htm
Data Extraction -Line Item Level- FI-CO
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
and bi best practice
http://help.sap.com/bp_biv335/BI_EN/html/BW/FinancialAccounting.htm
business content datasources, check respective datasources, delta is explained
GL
http://help.sap.com/saphelp_nw04s/helpdata/en/ed/e0143c5bd7b600e10000000a114084/framset.htm
AR
http://help.sap.com/saphelp_nw04s/helpdata/en/79/0d163c240a9440e10000000a114084/framset.htm
AP
http://help.sap.com/saphelp_nw04s/helpdata/en/79/0d163c240a9440e10000000a114084/frameset.htm
FICO
ttps://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
basic knowledge
http://help.sap.com/saphelp_47x200/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
FI
http://help.sap.com/saphelp_47x200/helpdata/en/56/df293581dc1f79e10000009b38f889/frameset.htm
CO
http://help.sap.com/saphelp_47x200/helpdata/en/1e/e9293504e1fd77e10000009b38f889/frameset.htm
Hope this helps,
Regards
CSM Reddy

Client Certification for Sender SOAP Adapter

I am trying to configure an incoming SOAP call to allow client certification for autentication and not ask for username/pwd. I already tried changing the configuration of the SOAP adater in visual admin to have the client certification module with no luck.
Please let me know if anyone has already done this before.

Hi,
Check the link for Client Certificate authentication...
[http://www.i-barile.it/SDN/EnablingSSL&ClientCertificatesOnTheSAPJ2EEEngine.pdf]
Regards,
Prakasu.M

Catalog views for ERP E-Commerce for MySAP ERP ECC 5.0

We are implementing the R/3 version of CRM-ISA (ERP E-Commerce for MySAP ERP ECC 5.0).
We need to implement product catalog views to allow filtering based on specific attributes.
We have created a custom function module Z_ISA_READ_CATALOG_COMPLETE to replace ISA_READ_CATALOG_COMPLETE and Z_ISA_CUSTOMER_READ_CAT_VIEWS to replace ISA_CUSTOMER_READ_CAT_VIEWS.
But when we test from ISA the FM Z_ISA_READ_CATALOG_COMPLETE does not get invoked through RFC.
There is an SAP NOTE 998453 that we checked but it is still a pilot version.
Has anyone implemented the catalog views without the notes? Can we do the catalog views without the note? If so, how can we meke custom FM work? Please advice.
Thanks,
VK

Check the following.
1. The XCM file modification-config.xml replaces both the function modules
2. The checkbox to use the catalog views is checked for your webshop
3. Catalog is published to TREX and you are using TREX catalog instead of Memory catalog.
I don't think these notes work without TREX. I'd be interested in learning if anyone successfully implemented Catalog views with ECC ECO without using TREX.
- Kishore

Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money for that

Hi All
Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money to SAP for that.

hi,
asking or teling ?
I think you need not as long as you are with official support . However please contact sap official support in you region

Certification for SAP - ABAP

is there any certification for SAP-ABAP ???

Hi this will help u.
certification ..
This is link from SAP about ABAP certification
http://www50.sap.com/useducation/certification/curriculum.asp?rid=351
http://www.sapteched.com/india/confactivities/certexam.htm
http://www50.sap.com/useducation/certification/curriculum.asp?rid=351
There is a pdf called ABAP certification.
http://www.esnips.com/web/SAP-ABAP?
You can try www.sapdoamin.com
They provide Certification simulation questions which are very useful and a must try site.
Have a look at below link for mySAP Technology - ABAP Workbench
https://websmp206.sap-ag.de/~sapidp/011000358700000746472003E
Have a look at below link for SAP NetWeaver - ABAP Workbench
http://www30.sap.com/hk/services/education/pdf/cert/ABAPWB.pdf
The certification test consists of questions from the areas specified below:
Topic Areas
1. mySAP.com Technologies
- mySAP.com
- Navigation (system handling)
- Technical setup of an SAP system
- System-wide concepts
2. ABAP Workbench Basics (++)
- Data types and data objects
- Internal tables
- Data retrieval (authorization check)
- Subroutines
- The ABAP Runtime System
- Function groups and function modules
- Program calls and data transfer
3. ABAP Objects (++)
- Classes and objects
- Inheritance
- Casting
- Interfaces
- Events
- Global classes and interfaces
- Exception handling
- Dynamic programming
4. ABAP Dictionary (++)
- Database tables
- Performance for table access
- Consistency through input check (foreigh key dependency)
- Dependency of ABAP Dictionary objects
- Views
- Search help
5. Techniqes for List Generation (++)
- Data output to lists
- Selection screen
- Logical database
- Program-specific data retrieval
- Data formatting and control level processing
- Storage of lists and background processing
- Interactive lists
6. Dialog Programming (++)
- Screen (basics)
- User interface (GUI title, GUI status)
- Screen elements for output (text fields, status icons, and group boxes)
- Screen elements for input/output
- Subscreen and tabstrip control
- Table control
- Context menu
- Dialog programming lists
7. Database Changes
- Database updates with Open SQL
- LUWs and Client/Server Architecture
- SAP locking concept
- Organizing database changes
- Complex LUW processing
- Number assignment
- Change-document creation
8. Enhancements and Modifications
- Changes in SAP Standards
- Personalization
- Enhancements to Dictionary elements
- Enhancements using customer exits
- Business Transaction Events
- Business Add-Ins
- Modifications
Weighting Key in the Test:
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
with regards,
HEma SUndara.
pls give points if u find helpful.

Certification for fi in Ecc 6.0

Similar Messages

Maybe you are looking for