Certification for homologation wireless

Someone knows where could I find the certificates for the homologation in wireless?
Thank you

Similar Messages

Urgent Help Required for Unified wireless network help

Dear Community
i need urget help for a wireless unified network setup to deploy it in a college
actually what is the senario for this network that i have a WLC 5500 and 12 lwapp 1252 series APs for this deployment ant there is allready an existing lan
network to connect with it the new wireless unified setup.
here is above proposed topology .
i need help for this setup like
i know the basic configuration on controller to do but i really do not know that from GUI what steps i need to configure on controller for each access points as you can see above i have three floors for building and i want to configur three SSIDs like Employ,contractors and Guest for each floor and how to configure encryption type and shared key for each SSiD.
and what i have to configure for APs to join them with controller
and hoe to configure RF grouping for each floor.
please i need urgent reply because i have tp finish this all setup in one weekonly
thans in advance.

Hi,
Wat ever you want.. the below link has everything.. Just click on the stuff that you neeed fro mthe menu and this will do it for you!!
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70.html
1>> Configure WLANs.
2>> Configure AP Grouping.
Regards
Surendra

Sap FICO Certification for Financial Accounting with mySAP ERP 2005

Hi,
I would like to write SAP-FICO Certification for Financial Accounting with mySAP ERP 2005
Topic areas:
SAP overview, Financial Accounting Master Data, Document and Posting Control,Special General Ledger Transactions, Document Parking, Substitution and Validation ,Payment Program, Dunning Program, Correspondence, Interest Calculation,Evaluation Options in Reporting ,Closing Operations in Financial Accounting ,Asset Accounting,The New General Ledger,SAP Solution Manager.
If anyone have the Material for above topics, please send me my mail Id: [email protected]
if anyone appeared recently for certification for the same code, please send model questions and answers.
i will be very thankfull to you.
Regards,
Satyaprakash

Hi
I am also writing SAP-FICO Certification for Financial Accounting with mySAP ERP 2005.
Request you to send me whatever the material you have in this regard.
thanking you in advance
Suri

SAP Business One 8.8 Certification for Application associate

Hi all,
I wanted to know about SAP Business One 8.8. Certification for Application associate.
1 )What would be the fee
2)What are minimum requirements to get certification
3)How much useful is this certificate compared SAP R/3 certification
Regards
Darshan Desai

For all these questions go to
https://websmp204.sap-ag.de/~form/handler?_APP=00200682500000002702&_EVENT=DISPLAY&_HIER_KEY=201100035870000001783&_HIER_KEY=301100035870000002834&_HIER_KEY=501100035870000019706&_HIER_KEY=601100035870000248281&_HIER_KEY=601100035870000248571&

How to setup a static IP for a wireless printer

This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it. For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better. At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected". The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
The only way to fix this is reboot, and then the printer shows up again in Preferences. I select it and all is well again...until a few days pass and the same thing happens again. Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use. I also have an Epson Artisan 725 and the same thing happens with it about once a week. Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer. Any help would be greatly appreciated.

You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
If you have AirPOrt Extreme, you could do this:
In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
Start up the AiPort Admin Utility
Go to Network tab
click + in the DHCP reservations
Choose an IP you want for your ATV & Enter the MAC address
From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
It is not a static IP in a true sense, but behaves just like one.
Works great for me...
If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.

What is the number for Verizon Wireless Corporate Customer Service Complaint for CA

My Complaint: I have been a Verizon Wireless customer for approx 20 years. I called customer service to seek an early upgrade for my daughter's phone. She is away in college and her phone is malfunctioning. She is eligible for an upgrade in approx 6 weeks so I did not want to spend the money on a replacement phone when since we were planning on updating to something newer. The customer service rep to me they could not do the early upgrade an to call back in a few weeks. After explaining this was unacceptable (I do not like the idea of a young female being out of state and away from home with no reliable means of communication), she places me on hold to later return with the only offer of I must purchase a new device through her ( over the phone) which will be shipped to me, the phone was priced $100.00 more than the online price (they will not price match), plus i must pay $30.00 upgrade fee, $35.00 activation fee and taxes on the retail price of the phone. I am upset and disappointed with the quality of service provided by Verizon being a 20 year customer. If not for the seriousness and urgency of this matter, i would not have asked for an early upgrade. It is times such as these that you get to see how much of a "valued customer" you really are. I guess you are valued as long as you pay your bill and continually purchase their products. I would like to speak with someone from Verizon's corporate or customer relations department. As of now I am really considering changing my service to a different provider. I have multiple accounts with Verizon and i will canx each after the current contract committment expire (starting with my daughter's phone which expires in 6 weeks) In the meantime I will go purchase her a new phone with someone else and take comfort knowing she will have reliable communication.

I started with them in 1985. It has been wonderful service but very expensive. They seem to operate on day of deposit day of withdrawal. That means that I have no benefits nothing beyond the normal customer if I don't pay my bill they shut me off. That's why I have switch to another provider and I have better service lower cost and better phones. you can't beat other providers I mean it. Please don't expect more from verizon other than a "pay me more money and I'll do what you want" because it's all about money. Read the transcripts from current Verizon employees all over the internet. The company is going down and they're taking customers with them.
msvat <[email protected]> wrote:
msvat created the discussion
"What is the number for Verizon Wireless Corporate Customer Service Complaint for CA"
To view the discussion, visit: https://community.verizonwireless.com/message/1113982#1113982
>

Looking for a wireless A4, edge to edge mac compatible printer

Looking for a wireless A4, edge to edge mac compatible printer? can anyone reccomend something which really works well with Mac?
I would get an A3 but I am guessing that A4 edge to edge would be better?
I need edge to edge as I design A4 brochures and I need to make 100% size mock ups.
thanks in advance

Hello gumbsali,
Most or our current model printers are compatible with the Mac OS X Mountain Lion operating system; so we can provide you with the best recommendation, please reply with the following information:
1. Will you need to have faxing ability?
2. What is the largest size paper you will need to print?
3. Will you need the ability to scan 35 mm slides or film?
4. Will you need the ability to scan?
5. Is there a specific price range you are looking to stay within?
6. Will you need the option of using the printer wirelessly?
7. How many pages a month do you estimate you will be printing?
8. What is the heaviest weight (in lbs) of paper (or cardstock) that you plan on using in the printer?
9. Will you need the ability to have the printer interface with an iPad, iPhone or Android phone?
10. Will you need the ability to print photos and images directly from a memory card?
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How can we suggest a new DBA OCE certification for very large databases?

How can we suggest a new DBA OCE certification for very large databases?
What web site, or what phone number can we call to suggest creating a VLDB OCE certification.
The largest databases that I have ever worked with barely over 1 Trillion Bytes.
Some people told me that the results of being a DBA totally change when you have a VERY LARGE DATABASE.
I could guess that maybe some of the following topics of how to configure might be on it,
* Partitioning
* parallel
* bigger block size - DSS vs OLTP
* etc
Where could I send in a recommendation?
Thanks Roger

I wish there were some details about the OCE data warehousing.
Look at the topics for 1Z0-515. Assume that the 'lightweight' topics will go (like Best Practices) and that there will be more technical topics added.
Oracle Database 11g Data Warehousing Essentials | Oracle Certification Exam
Overview of Data Warehousing
Describe the benefits of a data warehouse
Describe the technical characteristics of a data warehouse
Describe the Oracle Database structures used primarily by a data warehouse
Explain the use of materialized views
Implement Database Resource Manager to control resource usage
Identify and explain the benefits provided by standard Oracle Database 11g enhancements for a data warehouse
Parallelism
Explain how the Oracle optimizer determines the degree of parallelism
Configure parallelism
Explain how parallelism and partitioning work together
Partitioning
Describe types of partitioning
Describe the benefits of partitioning
Implement partition-wise joins
Result Cache
Describe how the SQL Result Cache operates
Identify the scenarios which benefit the most from Result Set Caching
OLAP
Explain how Oracle OLAP delivers high performance
Describe how applications can access data stored in Oracle OLAP cubes
Advanced Compression
Explain the benefits provided by Advanced Compression
Explain how Advanced Compression operates
Describe how Advanced Compression interacts with other Oracle options and utilities
Data integration
Explain Oracle's overall approach to data integration
Describe the benefits provided by ODI
Differentiate the components of ODI
Create integration data flows with ODI
Ensure data quality with OWB
Explain the concept and use of real-time data integration
Describe the architecture of Oracle's data integration solutions
Data mining and analysis
Describe the components of Oracle's Data Mining option
Describe the analytical functions provided by Oracle Data Mining
Identify use cases that can benefit from Oracle Data Mining
Identify which Oracle products use Oracle Data Mining
Sizing
Properly size all resources to be used in a data warehouse configuration
Exadata
Describe the architecture of the Sun Oracle Database Machine
Describe configuration options for an Exadata Storage Server
Explain the advantages provided by the Exadata Storage Server
Best practices for performance
Employ best practices to load incremental data into a data warehouse
Employ best practices for using Oracle features to implement high performance data warehouses

[Solved For Now] Wireless Not Working on HP Pavillion 15-n278sa

EDIT: I seem to have fixed it for now by following this tutorial, I don't know how long it will last though: http://askubuntu.com/questions/337785/w … -c55-a5281
Hi there guys,
I have been having some problems with my Wireless under arch on my lapotop, which is a HP Pavillion 15-n278sa. I've had the wireless working twice before, but a reboot broke it both times. The Ethernet works perfectly fine. The first time I have no idea how I got it to work, it was a combination of a bunch of different threads and eventually I modprobed the wireless adapter and it worked (this no longer works).
This is the output of when I try to connect to the wireless using wifi-menu:
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
So I run systemctl status [email protected] and journalctl -xn and this is the output of the both respectively:
Systemctl output:
Loaded: loaded (/etc/systemd/system/[email protected]; enabled)
Active: failed (Result: exit-code) since Wed 2014-03-19 11:20:53 GMT; 1min 49s ago
Docs: man:netctl.profile(5)
Process: 2154 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
Main PID: 2154 (code=exited, status=1/FAILURE)
Mar 19 11:20:52 carwyn-laptop systemd[1]: Starting Automatically generated profile by wifi-menu...
Mar 19 11:20:53 carwyn-laptop systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
Mar 19 11:20:53 carwyn-laptop systemd[1]: Failed to start Automatically generated profile by wifi-menu.
Mar 19 11:20:53 carwyn-laptop systemd[1]: Unit [email protected] entered failed state.
Mar 19 11:20:53 carwyn-laptop network[2154]: Starting network profile 'wireless'...
Mar 19 11:20:53 carwyn-laptop network[2154]: The interface of network profile 'wireless' is already up
journalctl output:
-- Logs begin at Sun 2014-03-16 14:34:24 GMT, end at Wed 2014-03-19 11:24:47 GMT. --
Mar 19 11:24:42 carwyn-laptop sudo[2237]: carwyn : TTY=pts/1 ; PWD=/home/carwyn ; USER=root ; COMMAND=/usr/bin/wifi-menu
Mar 19 11:24:42 carwyn-laptop sudo[2237]: pam_unix(sudo:session): session opened for user root by carwyn(uid=0)
Mar 19 11:24:47 carwyn-laptop systemd[1]: Stopped Automatically generated profile by wifi-menu.
-- Subject: Unit [email protected] has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has finished shutting down.
Mar 19 11:24:47 carwyn-laptop systemd[1]: Starting Automatically generated profile by wifi-menu...
-- Subject: Unit [email protected] has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has begun starting up.
Mar 19 11:24:47 carwyn-laptop network[2301]: Starting network profile 'wireless'...
Mar 19 11:24:47 carwyn-laptop network[2301]: The interface of network profile 'wireless' is already up
Mar 19 11:24:47 carwyn-laptop systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
Mar 19 11:24:47 carwyn-laptop systemd[1]: Failed to start Automatically generated profile by wifi-menu.
-- Subject: Unit [email protected] has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit [email protected] has failed.
-- The result is failed.
Mar 19 11:24:47 carwyn-laptop systemd[1]: Unit [email protected] entered failed state.
Mar 19 11:24:47 carwyn-laptop sudo[2237]: pam_unix(sudo:session): session closed for user root
The network cards that I am using are the following (output from lspci -nn)
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188EE Wireless Network Adapter [10ec:8179] (rev 01)
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 07)
This one being the wireless controller:
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188EE Wireless Network Adapter [10ec:8179] (rev 01)
If there is anything more I can provide I would happily do it, I really need the wireless to work under this laptop. I know it works, I have had it working under Arch and it works under Ubuntu no problem. I am not sure if it is a driver problem, or if it's a problem with netctl. It looks more like a problem with netctl as after netctl updated it started working, and after a reboot it broke again.
Thanks so very much everyone,
Bacondrinker
Last edited by bacondrinker (2014-03-19 13:47:15)

Synaptics Touchpad driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124009-1&cc=us&dlc=en&lc=en...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Best Practice for FlexConnect Wireless roaming in MediaNet environment?

Hello!
Current Cisco best practice recommendations for enterprise MediaNet design, specify that VLANs be local to a switch / switch stack (i.e., to limit the scope of spanning-tree).
In the wireless world, this causes problems if you want users while roaming to keep real-time applications up and running. Every time they connect to a new AP on a different VLAN, then they will need to get a new IP address, which interrupts real-time apps.
So...best practice for LAN users causes real problems for wireless users.
I thought I'd post here in case there's a best practice for implementing wireless roaming in a routed environment that we might have missed so far!
We have a failover pair of FlexConnect 7510s, btw, configured for local switching for Internal users, and central switching with an anchor controller on the DMZ for Guest users.
Thanks,
Deb

Thanks for your replies, Stephen and JSnyder.
The situation here is that the original design engineer is no longer here, and the original design was not MediaNet-friendly, in that it had a very few /20 subnets bridged over entire large sites.
These several large sites (with a few hundred wireless users per site), are connected to an HQ location (where the 7510s in failover mode are installed) via 1G ethernet hand-offs (MPLS at the WAN provider). The 7510s are new, and are replacing older contollers at the HQ location.
The internal employee wireless users use resources both local to their site, as well as centralized resources. There are at least as many Guest wireless users per site as there are internal employee users, and the service to them consists of Internet traffic only. (When moved to the 7510s, their traffic will continue to be centrally switched and carried to an anchor controller in the DMZ.)
(1) So, going local mode seems impractical due to the sheer number of users whose traffic bound for their local site would be traversing the WAN twice. Too much bandwidth would be used. So, that implies the need to use Flex / HREAP mode instead.
(2) However, re-designing each site's IP environment for MediaNet would suggest to go routed to the closet. However, this breaks seamless roaming for users....
So, this conundrum is why I thought I'd post here, and see if there was some other cool / nifty solution I wasn't yet aware of.
The only other (possibly friendly to both needs) solution I'd thought of was to GRE tunnel a subnet from each closet to the collapsed Core / Disti switch at each site. Unfortunately, GRE tunnels are not supported in the rev of IOS on the present equipment, and so it isn't possible to try this idea.
Another "blue sky" idea I had (not for this customer, but possibly elsewhere in the future), is to use LAN switches such as 3850s that have WLC functionality built-in. I haven't yet worked with the WLC s/w available on those, but I was thinking it looks like they could be put into a mobility group, and L3 user roaming between them might then work. Do you happen to know if this might be a workable solution to the overall big-picture problem?
Thanks again for taking the time and trouble to reply!
Deb

Any certification for wd abap?

Hi experts,
I like to know whether there is any certification particularly for webdynpro abap.
If yes, then wat is the preferred book or material for that one and the eligibility criteria for that one. If possible explain me abt the certification in wd abap.
Regards,
Arun.

Hi Heidi,
I want to do certification individually, how can i do it and can u suggest me the material for the same.
As per ur reply i came to know there is a separate certification for wd abap.
I know there is a material named net310 is available for wd abap.
regards...
Arun.

HT4628 After installing the new OS from apple (10.8.2) my macbook pro keeps disconnecting from the internet. I am connecting with an Airport Extreme and while it shows I am connected, every 20-45 seconds its searching for a wireless connection. Any sugg

I guess I posted my question as a title but that is my issue. My airport is connected via wireless yet it keeps searching for a wireless connection, hence I am experiencing bad latency and disconnection issues. Anyone know a solution?

I have the same problem. And in my case it happens when i transfer "large" files over the WiFi. When i send an MP3 filer over Skype i loose connection. When i transfer updates between my iPhone 5 / iPad 3 and iMac with Mountain Lion i loose connection. When i have a video conference i loose connection. You get the idea.
There is usually like 30 people using their own router on the 2.4 GHz band near by. None on the 5 GHz band which i use. But when my WiFi freezes on ML i can only see my own router. And i am also connected to it. But all my neighbors WiFi routers are now invisble to me. My network stalled.
What i do is that i disconnect my WiFi and then reconnect it again. Thank fixes it. But all my transfers and what not has been dropped. And i have to start all over - and the WiFi will stall again.
While my WiFi is frozen on the iMac with ML i have no problem using the same router on the same 5 GHz band with my iPhone 5 or iPad 3.
Downgrading the AirPort Extreme to 7.6.1 from 7.6.3 helped a bit. Now i only loose connection a few times each day.
It is a software error in ML i am sure of. A driver maybe. But i am suspecting that it is either a speed-sync error or an energy saving error. Like the network card turns of in the middle of a file transfer to save enrgy - maybe.
When i stream movies from my iMac to my Apple TV or 3 there is no problem at all. It is so odd.

Trying to hook up preowned airpoirt extreme. asking for password for selected wireless device. would there be a password from previous owner?

trying to hook up preowned airpoirt extreme. asking for password for selected wireless device. would there be a password from previous owner?

A "hard reset" will do the same thing.
Make sure that the AirPort Extreme is powered on
Hold in the reset button for a few seconds and the amber light will begin to blink more quickly. Keep holding the reset button when you see this for another 4-5 seconds and release
Allow 25-30 seconds for the AirPort Extreme to restart to a slow, blinking amber light
Open Macintosh HD > Applications > Utilities > AirPort Utility and click Continue to follow the guided setup

Valet M20 - Connecting another Valet Plus for more wireless connections

Can you hook up on Valet Plus to another Valet Plus for more wireless connections?

Like UnknownHero has asked, how many devices do you intend to connect? A single Valet Plus shouldn’t have trouble handling a normal home network which laptops, wifi phones, media players, DVRs etc.
But to answer your question, yes, it is possible.

May a recent i Mac be installed as the host computer for a wireless community

May a recent iMac be installed as the Host Computer for a wireless community. The present situation is; the iMac is subservient to the e Mac. I do not want to have two computers. I have one guest on the wireless.

There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Mac - How to Move the iPhone & iPad iTunes Backup folder to an External Hard Drive
http://osxdaily.com/2011/03/05/how-to-move-the-iphoneipad-itunes-backup-folder-t o-an-external-hard-drive/
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
 Cheers, Tom

Certification for homologation wireless

Similar Messages

Maybe you are looking for