Certification for Windows 2008 R2 x64
Hi,
My customer wants to know if OEM 11g Grid Control R1 is supported to be installed (Repository, OMS and Agents) on Windows 2008 R2 x64. Repository will be on DB 11gR2 to monitor OFMW 11gR1 components (11.1.1.3) which are running with Sun JDK 1.6 64-bits).
Certification Matrix (Doc ID 412431.1) in My Oracle Support seems to be not updated as it does not shows OMS 11g, only OMS 10gR3 and R2 are available.
Is there a date for this support/availability?
Thanks,
Fernando.
My customer wants to know if OEM 11g Grid Control R1 is supported to be installed (Repository, OMS and Agents) on Windows 2008 R2 x64. Repository will be on DB 11gR2 to monitor OFMW 11gR1 components (11.1.1.3) which are running with Sun JDK 1.6 64-bits).
OMS 11G is not available for Windows 64 bit. However you can use 64 bit windows for repository databases.
Certification Matrix (Doc ID 412431.1) in My Oracle Support seems to be not updated as it does not shows OMS 11g, only OMS 10gR3 and R2 are available.Please select 11G OMS from the dropdown , certification information for 11G is also available in the note.
Is there a date for this support/availability?Please keep checking otn.oracle.com for availability.
Regards
Rajesh
Similar Messages
-
Best practice for installation oracle 11g rac on windows 2008 server x64
hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christianHi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira -
Jinitiator & IE8 On Windows 2008 R2 x64 Server - Please Help!
Hello All -
I am wrapping up configuration of a Citrix Xenapp server for a presentation to my manager. The ONLY thing that I cannot get working is jinitiator for our Oracle apps. It is running on IE8 on WIndows 2008 R2 x64.
I have done a lot of research and replace jvm.dll from Java, but haven't been able to get that to work. My guess is that it's either because I'm downloading the incorrect version of Java (which I extract the .jvm file from) or that i'm running x64.
Please give any suggestions to help. I've spent hours on this project and if I cannot figure this out and have to go back to a different version of OS, then it's all lost -
Thanks!801574 wrote:
Great - Thanks.
Will this need to be something that it installed/configured on my machine with IE8 installed or will changes need to be made to the actual Oracle server? We don't manage the server so hopefully it will be the client end.
Thank YouAs long as you have the necessary version of JRE installed, you should be good. Necessary application changes/configuration must be made in order for it to use JRE.
Srini -
I-tunes for Windows XP Professional x64
I tried a lot to find out i-tunes for Windows XP Professional x64 bit
but i didn't get any solution for installing i-tunes in my laptop which had Windows XP Professional x64 bit.
when i asked to other person then at last i found only one reply that,
"If i want to install i-tunes in my laptop then i has to CHANGE OPERATING SYSTEMiTunes is a 32 bit program.
The 64 bit installer has 64 bit drivers for burning and the iPhone.
If you don't have an iPhone you should be able to install the 32 bit iTunes and then download the 64 bit Gear drivers for burning from the Gear download site:
http://www.gearsoftware.com/support/drivers.cfm
You may need to enable scripts if you are using Firefox with Noscript.
If you have an iphone and want to try to get the 64 bit installer to work here are some links that may help:
http://yukichigai.googlepages.com/iphonex64
http://pctech.invisibill.net/?page_id=36
http://skunkwerks.wordpress.com/2008/04/13/getting-itunes-to-work-with-windows-x p-x64/ -
SAP Cryptographic Library for Windows 2008
Hello,
Do you know where can i find SAP Cryptographic Library for Windows 2008 x64?
I was trying to find it in swdc, but there's only for Windows 2003 - and it's not working with 2008.
Best regards
BartoszHi,
Just an information from my experience : I have never been able to download any release of the SAP Crypto library contrary to what all the documentation and SAP notes tell.
We had always to ask our SAP representative and to wait for several weeks to receive a DVD by physical mail.
Regards,
Olivier -
MPIO versions for Windows 2008 SP1 and R2?
Where can I find a list of the latest versions numbers of MPIO for Windows 2008 SP1 and R2?
Hi,
Do you mean the latest version of mpio.sys file?
After search I think the latest version of mpio.sys is 6.1.7601.21687, Date is 19-Mar-2011.
For all supported x64-based versions of Windows Server 2008 R2
Collapse this tableExpand this table
File name
File version
File size
Date
Time
Platform
Mpio.sys
6.1.7600.20928
156,544
19-Mar-2011
07:34
x64
Mpio.sys
6.1.7601.21687
156,544
19-Mar-2011
07:45
x64
For all supported IA-64-based versions of Windows Server 2008 R2
Collapse this tableExpand this table
File name
File version
File size
Date
Time
Platform
Mpio.sys
6.1.7600.20928
353,664
19-Mar-2011
06:52
IA-64
Mpio.sys
6.1.7601.21687
353,664
19-Mar-2011
06:50
IA-64
For more information please refer to following MS articles:
"0x000000D1" Stop error occurs in the Mpio.sys driver in Windows Server 2008 R2
http://support.microsoft.com/kb/2511962
"msdsm.sys” and “mpio.sys" files version after SP2 installation
http://social.technet.microsoft.com/Forums/en/winserverClustering/thread/c18b5111-9888-4aba-bda5-22a54b7227d9
Lawrence
TechNet Community Support -
Record the CPU Load in a log for Windows 2008 R2
Use performance monitor and log it to a file.
Hi,
I am an Oracle DBA. I need to record the load of the CPU for windows 2008 R2. Load in the sense Total Memory, Available Memory, Cached and Free. All together into a log.
Kindly suggest me on the same.
Thank you.
This topic first appeared in the Spiceworks Community -
Remote Agent for ACS for Windows 2008 R2 64-bit
Hi,
We having difficulties with installing remote agent on windows 2008 R2 64-bit server and got the attached error.
Our ACS is 4.2.0.124 and remote agents we tried are :Remote-Agent-ACSse-win-v4.2.1.15-K9.zip and Acs-4.2.1.15.9-RA.zip.
I see following urls says it does not support Windows 2008 R2 and also 64-bit Windows,
https://supportforums.cisco.com/message/3135061#3135061
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289019
However following url says its support 2008 R2 with 64-bit version
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/Release_Notes/acs421_rn.html
Appreciate if someone can adivse us what vesion (file name) of Remote Agent can support (or working) for Windows 2008 R2 64-bit.
thanks in advanceHi Tarik,
What I wanted to say that the below url says that ACS 4.2 does not support on 64-bit OS:
ACS Requirements
You must use ACS Remote Agent for Windows, version 4.2, with ACS SE, version 4.2. We do not support other Cisco Secure ACS releases.
Note ACS Remote Agent 4.2 for Windows does not support 64-bit operating systems.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289019
However could you please let me know what exact Remote Agent file you recommend to use for windwos 2008 R2 64-bit Server. The ACS SE version that I have is 4.2.0.124.
Thanks -
We would like to adopt the hardening recommendation for Windows 2008 R2 from CIS to all our DC servers. However, but then we found some of our DC in remote sites are Windows 2008 server only.
Is the hardening settings from Windows 2008 R2 from CIS also applicable to Windows 2008 DC?
Thanks for your attention.Yes, this should be fine. Hardening only specific security settings, registry keys etc and there's not much difference if you consider hardening.
Just for reference, here's the difference between 2008 and R2 :
http://technet.microsoft.com/en-us/library/dd391932(WS.10).aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
Hi,
I have try to install oracle 10g database on Windows 2008 R2 Standard Edition. But none of the 64 bit installation are not working.
Checking operating system version: must be 5.1 or 5.2 . Actual 6.1
Failed <<<<
I check for specific Installation for this windows version, but i couldn't find it.
Can someone give me advise for this.
Thanks.Hi,
see Oracle 10g Installation on Windows Server 2008 RC2
Beware that for Windows 2008 R2 you need at least 10.2.0.4. Install 10.2.0.3 found on technet and upgrade from Metalink Patch.
Herald ten Dam
http://htendam.wordpress.com -
Oracle Client for Windows 2008 R2
is there a 10g or 11g cleint available for Windows 2008 R2? The latest Win64 or Windows 2008 clients all give me an error that saus it supports versions up to 6.0 and I have version 6.1
There is a work around that can help to install 11g release 1 on windows 2008 R2
The installer can be executed in compatability mode by right clicking on setup.exe and select "Troubleshoot compatibility" then "Troubleshoot Program" then check option "The program worked in earlier versions of windows......." then choose "Windows Server 2003 (with service pack 1)" and in the last step click "start the program" button.
hope tihs will start installing Oracle 11g Release 1 on Windows Server 2008 -
EBS software or installer for windows 2008 R2 84 bit
Not able to find the oracle EBS software or installer for windows 2008 R2 64 bit operating system. Let me know if Oracle EBS media is available for windows 2008 R2 64bit operating system
Hi;
The Oracle E-Business Suite Rapid Install media for Windows presently only supports an installation on 32-bit Microsoft Windows Server (2003, 2008).
Please see:
Migrating Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
Regard
Helios -
I need the link to download Adobe Flash Player 64 bit for Windows 2008 server
I need the link to download Adobe Flash Player 64 bit for Windows 2008 server
http://get.adobe.com/flashplayer/
The page has javascript to determine OS and bit rate. it WILL provide you the correct download. -
J2sdk1_4_2-? version for Windows 2008
Hi All,
We need the exact j2sdk version to install on windows 2008.The operating system is 64-bit version with xeon processor. If it is possible then send the exact sun path to download.
Thanks & Regards,
Sridhar M.Hi,
Yes you are right there are no certified JRE/JDK for Windows 2008.
Sun JDK 1.4.2 is required for SAP SAP NetWeaver 7.0 and works well but it's not tested on windows 2008.
also check https://www.sdn.sap.com/irj/sdn/windows?rid=/webcontent/uuid/901e077f-d0c5-2a10-90ba-bb5b8acc243c
regards,
kaushal -
GX600 enable VT, for example for Windows 2008 HyperV
Hi.
Is there a modified BIOS to enable VT on the GX600, for example for Windows 2008 HyperV?
Using forum search I only found https://forum-en.msi.com/index.php?topic=121665.0
Thank you & ByeYou can try using Auditpol.exe: http://technet.microsoft.com/en-us/library/cc731451%28v=ws.10%29.aspx
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer
Thanks but I guess, auditpol ca be used only to manipulate system audit policies. how do I specify a folder and user in auditpol ? I could not find or understand how folder can be included with auditpol command line options.
Thanks !
Maybe you are looking for
-
I am running itunes 11.1 on Windows 7 Starter (1.6 GHz, 1 GB, 32 Bit System). My iTunes wil not "see" the iPhone when I plug it in. It will see my kids iPod, but not the phone. When I run the diagnostics, under "Ports" the check box is red beside
-
Can anyone please tell me what's wrong with the following query? I'm using TOAD SELECT * FROM bin_data UNPIVOT ( direction FOR bin_data IN (bin_1_dat
-
How to allow users to create P.O only for one material type and cost centre related P.O.
-
Nokia e7 and multimedia transfer for mac
i have nokia e7 , and i want to transfer my multi media file to my macbook pro. the website are recommend me to use a multimedia transfer for mac. i download it and i find that my mac can not be paired with e7. is it because i do it wrong or is nokia
-
Give Me Some Information Regarding procedures and Constraints
HI Seniors Please give me some idea about stand-alone procedures ..? 1)When to use Standalone procedure ? 2)What are the constraints in Pl/SQL ?When to use these constraints in pl/sql? 3)What is Named Notation ? Best Regards Busi