Certification in JD Edwards EnterpriseOne (CNC)

Is there any exam available for JD Edwards EnterpriseOne (CNC)? If no official certification, I would like to know what some good "supporting" certifications & trainings for a CNC Administrator.
Edited by: user1058947 on Apr 12, 2009 7:24 PM
Edited by: user1058947 on Apr 12, 2009 7:56 PM
Edited by: user1058947 on Apr 12, 2009 7:57 PM

Go to oracle.com. You do not need to be registered to get to this site. On the right side, under Resources section, click on Education, Certification. That gets you to the Oracle University web site. On the left side, click on JD Edwards EnterpriseOne link. Then on that window click on one of the Tools and Technology learning paths. That will give you the courses you should take to get CNC training. There is no certification for CNC. At least Oracle does not list any on its certification web site, and I am not aware of any myself. Keep in mind that EnterpriseOne may have a limited future. At some point Oracle is going to merge all its ERP product lines into one line. Just something to think about. Hope this information helps a bit.

Similar Messages

SQL Server Reporting Services installed on a production database server used to support JD Edwards EnterpriseOne. What performance isses can arise

SQL Server Reporting Services installed on a production database server used to support JD Edwards EnterpriseOne. What performance isses can arise. Is it recommended. What are the pros and cons

Hi hazelannc,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated. Thank you for your understanding and support.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to add new company in JD Edwards EnterpriseOne

Hi all
I am trying to create a new company on the JD Edwards EnterpriseOne, but I dont know how to do so. I try to navigate on the General Ledger setup menus, but there i dont find the possibility to add a new company. As i was reading the implementation guide it was saying that the system comes with a set of predefined types of companies.
Can you please tell me if there is a possibility to add a completely new company in the system and please advice how to do so.
Thank you and best regards

If I am getting your question correctly, you intend to configure a new legal entity in E1. For this, go to "Company Names and Numbers application" using E1 Mene or type P0010 in the fast path. Hope it helps.
Thanks.

"already exist" error during JD Edwards EnterpriseOne 9.0 installation

Hi all
I am trying to install JD Edwards EnterpriseOne 9.0 and i am having the following error:
"Prototype Control Tables and/or Business Data already exist. The installer detected an existing Prototype Environment on your computer. Please go back and switch to Upgrade Mode, or click cancel, and uninstall your existing Prototype Environment and try again."
I have installed successfully the deployment server but when i try to install the enterprise server i am having this error. After installing the deployment server(on windows with oracle database) i do not know which are the default credentials for entering the E1LOCAL database created.
Can you please suggest how can i solve this issue?
Thank you and best regards

Check NLS_LANG in HKLM\SOFTWARE\ORACLE\KEY_XXX It must be AMERICAN_AMERICA.AL32UTF8

New to JD Edwards EnterpriseOne

Hi All,
I have been given a job to maintain a JD Edwards applicaton's database. I work as Oracle Core/RAC DBA. I have no idea about JD Edwards One and I need assistance to learn about JD Edwards EnterprisOne. I only know that it's an ERP product ,now owned by Oracle, and it has two types of Structure , Controlled structure and Data Structure ( If I am wrong please correct me). I need to know what type of documents I have to go through in order to understand the architecture of JD Edwards EnterpriseOne.
Can anyone provide me the links to learn about JD Edwards EnterpriseOne and it's database(oracle 10g/11g) architecture. I want to self start to get an idea. Also I want to practise it practically..If possible pelase provide me th practical guide..
Thanks in advance for the help. Please help me out............
Regards,
Imran Khan
Edited by: 930751 on Feb 6, 2013 7:36 AM

Hi Imran,
here you will find the installation guide.
Chapter 20 is about major technical tables, you will found useful.
Here you will find the admin guide.
This is not only for dba admin but for JDE admin.
Regards.
Bruno Condemi

JD Edwards EnterpriseOne not populating correc environment.

Hello
first of all, if this is not the correct section for this post please let me know ehere to move it to.
now, i have some users that acccess JDE via citrix, and they are not getting the environment variable propperly populated, this happens both in and off citrix (accessing the program directly from the server)
before i go into the details of the attempted steps, i should say that they use 3 different environment from 3 different locations, and somehow this other environments are getting populated in the logon screen that is supposed to direct the connection to a specific environment.
ok, so JDE ins installed on a Win2k3 32bit system running with local profiles.
if i login the user "a" directly to the host server and execute the application, it loads the propper environment, however if i log the user "b" to the host in the exact same way, the user "b" will get the environment from another location, and of course the login will fail, if i attempt to change the environment from the logon screen, i get a message stating that the logon failed.
i have tried recreating the windows profile for the "b" user i will get the same result, i have also tried copying overwrite the profile of the "b" user with the information of the "a" user with the same result.
any help would be appreciated.
Thanks

hy,
here you go:
"JD Edwards EnterpriseOne Applications Release 8.12 Installation Guides, Update ID 704546.1"
you should take note that this is for metalink3 ;)
Cheers,
Dan.
Edited by: PilotRO on Nov 4, 2009 1:20 PM

JD Edwards EnterpriseOne HCM

We are currently implementing HCM Module of JD Edwards EnterpriseOne and unfortunately as being explained by the implementing company, JD Edwards HCM is using the methodology of hours in computation of payroll (and everything as well in relation to the payroll).
Is there a work around in order not to use the methodolgy of hours as we here in our company is using days?
I'm sorry if I posted this question under this section for I have no idea if where would be the suitable section to post my question.

You can get all of the JDE MTRs at this link but keep in mind this is only miniums (you will need a login to the Oracle support site to access this link). The sizing of JDE hardware depends on many factors, total users, concurrent users, data base size, projected growth, JDE applications in use.
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(from=BOOKMARK&bmDocType=REFERENCE&bmDocDsrc=KB&bmDocID=705410.1&bmDocTitle=EnterpriseOne%20Minimum%20Technical%20Requirements%20-%20What's%20New&viewingMode=1143))
So you really need the help of someone experienced with JDE implementations. If you have purchased JDE then the VAR you bought it from I would assume will be help you to implement. If that isn't the case then will want to find a company for this.
I have been doing JDE Consulting for 11 years and have very deep experience If you are looking for help please feel free to contact me at [email protected]
Regards, Nolan

JD Edwards EnterpriseOne and Vertex

I have a copy of "JD Edwards EnterpriseOne Tax Processing 9.0 Implementation Guide" dated September 2008. Is there anything later? Or is there a specific guide just for Vertex O?

You can get all of the JDE MTRs at this link but keep in mind this is only miniums (you will need a login to the Oracle support site to access this link). The sizing of JDE hardware depends on many factors, total users, concurrent users, data base size, projected growth, JDE applications in use.
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(from=BOOKMARK&bmDocType=REFERENCE&bmDocDsrc=KB&bmDocID=705410.1&bmDocTitle=EnterpriseOne%20Minimum%20Technical%20Requirements%20-%20What's%20New&viewingMode=1143))
So you really need the help of someone experienced with JDE implementations. If you have purchased JDE then the VAR you bought it from I would assume will be help you to implement. If that isn't the case then will want to find a company for this.
I have been doing JDE Consulting for 11 years and have very deep experience If you are looking for help please feel free to contact me at [email protected]
Regards, Nolan

JD Edwards EnterpriseOne 8.12 Installation Guides

Hi
Can some one please gave me Metalink Note No. for JD Edwards EnterpriseOne 8.12 Installation Guides on Linux
I am not able to find it on Metalink3
Thanks and Regards,

hy,
here you go:
"JD Edwards EnterpriseOne Applications Release 8.12 Installation Guides, Update ID 704546.1"
you should take note that this is for metalink3 ;)
Cheers,
Dan.
Edited by: PilotRO on Nov 4, 2009 1:20 PM

Bad link in JD Edwards EnterpriseOne Documentation Libraries

The download link on the http://www.oracle.com/technology/documentation/jdedarch.html page for Part Number B28733-01 (JD Edwards EnterpriseOne 8.11 PeopleBooks) points to a zip file with PeopleSoft Enterprise 8.9 documentation.

It really depends on the license for the database that you purchased. The only restriction I am aware of in regards to EnterpriseOne is a restriction on the Oracle Database IF you are using the database license that comes with the Red Stack licensing. This is an unlimited use license for Oracle Standard Database and is only good for EnterpriseOne. Meaning, if you use this license, you cannot use the database for other 3rd party applications. Where this would be seen is if you had EnterpriseOne on the Oracle Standard database and tried to also use that Oracle database for something like DSI. That would be a violation of the license agreement. However, there is no license violation that I am aware of if you install EnterpriseOne onto say a Oracle RAC cluster that you licensed separately outside of the tech foundation license. In that case, you would only be bound by whatever licensing restrictions there are in place with the version of the Oracle Database you purchased. Things like licensing per processor. You could still make changes to the EnterpriseOne database as you see fit. No different than E1 running on any other database platform.

List of all JD Edwards EnterpriseOne User ID's including E1 Manager.

Dear Guru's
I'm new to this group, Could you please help me to get the list of all the Users under JE Edwards EnterpriseOne, including the Users at EnterpriseOne manager, for ex: admin users.
Looking forward to hear you soon!
Thanks in advance.
Regards,
Iqbal...

Hi..
if you are asking for the normal JDE User :
IN THE FAST PATH TYPE : Users
press find..
these are the user in the JDE System..
is this your request?

JD Edwards EnterpriseOne cluster system requirements

hi
we bought JD Edwards EnterpriseOne and we want to hyper-v cluster - JD Edwards EnterpriseOne has DB + BI Server Web Deployment + Enterprise Server applications. hyper-v cluster structure in which all applications are run in this configuration. What are the system requirements. we have 2 2008 server and 1 store.
What are the system requirements?
ram cpu etc....

You can get all of the JDE MTRs at this link but keep in mind this is only miniums (you will need a login to the Oracle support site to access this link). The sizing of JDE hardware depends on many factors, total users, concurrent users, data base size, projected growth, JDE applications in use.
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(from=BOOKMARK&bmDocType=REFERENCE&bmDocDsrc=KB&bmDocID=705410.1&bmDocTitle=EnterpriseOne%20Minimum%20Technical%20Requirements%20-%20What's%20New&viewingMode=1143))
So you really need the help of someone experienced with JDE implementations. If you have purchased JDE then the VAR you bought it from I would assume will be help you to implement. If that isn't the case then will want to find a company for this.
I have been doing JDE Consulting for 11 years and have very deep experience If you are looking for help please feel free to contact me at [email protected]
Regards, Nolan

Hands On Lab: JD Edwards EnterpriseOne Business Services Development

I am attempting to complete the tasks in the lab listed in this thread's title, but I am having trouble with it.
My EOne versions are:
App. Vers.: 8.12
Tools Vers.: 8.97.10
When attempting to add a published business service object to my project, when prompted for Source Language, "BSSV" is not one of the options I have available. All I have are "C" and "NER".
What do i need to do to have "BSSV" as one of my Source Language options?
Thanks,
Michael

If it is not too late!
To Develop BSSV (an object type in OMW, to invoke JDeveloper), the prerequisites are!
EnterpriseOne Tool Release 8.98, is required. In this release OMW Form has been changed to select BSFN > C or NER or BSSV.
EnterpriseOne E8.12 is required.

OpenScript Load Test : JD Edwards EnterpriseOne

Hi,
When I record the script for load testing against JDE EnterpriseOne the openscript record a lot of items that I don't need it (.png files for example). How to avoid recording the objects that I don't need it?
I only went to JDE login page and I got 50 ond more items recorded.
Thanks

Hi,
If you are an Oracle employee, you may download the student guide. Else, following may be used as a reference(is not exhaustive though):
a.     Setting Up of General Accounting Constants (P0000/F0009)
b.     Setting Up Fiscal Date Patterns – 14 period and 54 period accounting (P0008/08B), (F0008/08B), (F0902/F0902B), F0911 is common.
c.     Setting Up of companies (P0010/F0010)
d.     Setting Up Business Units, including Model (P0006/F0006) - MCU
e.     Designing and managing the Chart of Accounts (P0901/F0901)
f.     Creating a Model Chart of Accounts
g.     Creating Accounts Using Dynamic Account Creation
h.     Automatic Accounting Instructions (P0012/F0012)
i.     Multi Currency Setup
i.     Currency Code – P0013/F0013
ii.     Designate AR Currency – P03013
iii.     Designate AP Currency – P04012
iv.     Currency conversion rates – P0015A
j.     Next Numbering (P0002)
i.     By Company
ii.     By Company and Fiscal Year
k.     Tax Processing
i.     Sales Tax, VAT Journals etc.
ii.     Tax Authorities– P01012
iii.     Tax Rates/Areas- P4008
iv.     Tax Rules- P0022
v.     Tax Explanation Code – P0004A
l.     Ledger Type Master (P0025)
m.     Document Type (P0004A)
Thanks.

Oracle Web Logic/Transaction/BSSV/Fusion TRAINING

Hi, I'm an Oracle JD Edwards EnterpriseOne CNC Consultant. I am working with a client that has become my primary client that is using Oracle Fusion, Transaction Server, XPI Server, and Business Services Server. I have very little experience working with Oracle Fusion, XPI Server and Transaction server. However, this client uses all these servers as a large part of there business and I will eventually be responsible for supporting all these servers.
So, I have been trying to find the best source and classes (s) that would best help me 1.) understand how all these different servers/components work together, and 2.) get training on how to setup and manage/administer these servers.
Could you please give me your thoughts on what sources/classes I should focus on? I went out to the Oracle University website but there are like a million different classes out there and I have no idea which one or ones to focus on.
Any help would be greatly appreciated!
Thanks,
Jon

okKarol wrote:
Hello DBA's
Just to understnad soemthing?
What's WebLogic? is't like HTTP? it replaces HTTP? I mean Is the New WebServer fro ORACLE?
And Fusion MiddleWear?
thxs if you can briefly answerWebLogic Server (WLS) is the new version of application server and replacement to Oracle Application Server (OAS). OAS stopped at Java J2EE 1.4. WLS handles JEE 1.5 and higher.
Fusion Middleware is the new set of "servers" based on WLS that replace and extend the functionality started with OAS. Fusion Middleware is the 11g brand. Oracle Application Server is the 10g brand.
Fusion Middleware breaks out all the components so yuo can pick and choose what you want and install each separately. OAS did all the install in one unified lump and you would only configure what you wanted.
To get to Oracle Application Server, you would go through an HTTP server. You can still do that with WebLogic Server, although it is not necessary as WLS understands basic HTTP well enough to accept requests directly.
So you had Forms Server 10g based on OAS, and now you have Forms Server 11g based on WLS.
And Discoverer 10g in OAS Enterprise Edition, becomes Discoverer 11g add-on to WLS.
And so on.

Certification in JD Edwards EnterpriseOne (CNC)

Similar Messages

Maybe you are looking for