Certification query plz
dear all,
suppose there is a persone talled you I have the OCP certification how do you check this
i mean is there any web site to verification
thanks
user10699277 wrote:
Hello, If you gave OCP exam through Prometric then visit only www.2test.com OR if you through Pearson visit this site.
Prometric is international standard exam center.
I hope now you have satisfy this info.IMHO Kamrans' and Hubs' answers are good. Your references are quite IMHO misleading. It is difficult for me to understand your angle unless it is ultimately to be up to mischief. Otherwise your statements do far seem to indicate limited knowledge knowledge in this area and appear to me to be directing people to look suboptimally for answers.
Edited by: bigdelboy on 14-Oct-2009 03:02 Note: People may be still able to access their Prometric candidate history for the last 10 months or so at : [https://www.register.prometric.com/CandidateHistory.asp]. IMHO This page sometimes seems to be intermittently unavailable at times. I am unsure if Oracle exams will be withdrawn from this at some point.
Similar Messages
-
Hello Everybody
i m planning to certification in SAP. i did my M tech with Specialization in SAP ABAP. i have 9 month of experience in SAP ABAP as an intern. there are some query regarding certification :
1. As i already have some experience in ABAP so is it worthy to do SAP ABAP Certification.
2. Which Certification is good for me? (As i don't have much knowledge about it)
3. Which Institute will be better Siemens or Genovate (In which city the training is best among different cities)
4. I also have interest in MM module. Can i go for MM certification (As i heard for SAP MM certification requires 2 years of experience)
5. After Certification what is the placement scenario, is the placement is assured or how many confirm interview i will get after certification?
6. I tried to find out the schedule of Siemens for Aug - Sept. but unable to find out. Is there any link for that.
Waiting for your reply ( Its urgent )
Thanks and Regards
Virendra Singh Somwanshi
9654469810Hello thr,
Siemens is good. so which city ur belong to? contact ur nearest Siemens Centre to resolve of all ur query plz.
Cheers.
Bandhan -
BI 7.0 Certification Query
Dear Gurus,
I am giving certification exam in a short while. I have a list of Questions which i would like to ask with reference to BI 7.0. Dont dont have to answer all the questions, just answer what you know. I would be realy grateful:
1: Which of the following refer to pointer tables that provide the technical link to the master
data outside of the InfoCube?
a. Dimension tables
b. Set IDs
c. M tables
d. SID tables
e. ODS transparent tables
2: Which of the following statements describes a categorical dimension?
a. An artificial dimension used to describe the status of another dimension
b. An artificial dimension/attribute used to categorize another dimension
c. An artificial dimension used in a reporting scenario where the comparison of the
same key figure is needed
d. A dimension that is used across all cubes
e. None of the above
3: Which of the following is an example of a slowly changing dimension?
a. Customer on a sales order
b. Date
c. Person responsible for a cost center
d. Value of a purchase order
e. None of the above
4: Which of the following occurs as a result of degenerating dimensions?
a. The grain of the fact table represents actual working documents like order number
or invoice number
b. All descriptive attributes of the grain are located in other dimensions
c. The InfoCube becomes very weak and performs poorly when it is run
d. The degenerating dimensions cannot be modeled using normal star schema
e. None of the above
5: Which of the following describes an unbalanced hierarchy?
a. A hierarchy with too many leaves within one branch
b. A hierarchy with fewer nodes within one or more branches
c. Hierarchy without leaves
d. The term used for data that are delivered from two or more sources on different aggregation
levels
e. None of the above
6: Which of the following represents a characteristic that spans an entire data model and
upon which all other entities are dependent?
a. Many-to-many relationship
b. A degenerated characteristic
c. A strong entity
d. An attribute
e. A data model characteristic
7: When should an attribute be placed in a separate dimension?
a. Always
b. If the attribute changes frequently
c. If the attributes have a large number of distinct values
d. Never
e. None of the above
8: Which of the following objects keeps the aggregate and InfoCube in sync?
a. Dim pointer
b. Read pointer
c. SID pointers
d. Surrogate pointer
e. None of the above
f. All of the above
9: Which of the following statements are not correct about the PSA?
a. Created for each communication structure
b. Transfer rules have been applied
c. You can load from the PSA to an InfoCube
d. Queries can be generated from the PSA
e. None of the above
10: In which case can you not use aggregates in SAP BW?
a. Attributes of time-dependent characteristics
b. Slowly changing dimensions
c. Hierarchy structure
d. Degenerate dimension
e. None of the above
11: What does the Data Changes Aggregate Update Program do?
a. Activate all hierarchies and attributes
b. Generate all aggregates affected with a new change ID
c. Set the pointers to the right change ID
d. Roll up all aggregates that have been changed since the last update
e. None of the above
12: Which of the following are correct concerning CO/PA?
a. Summarization levels for an operating concern have the same function as aggregates
for an InfoCube
b. CO/PA summarization levels are managed by the InfoCube, and always contain the
same numbers as the InfoCube that they are based on
c. Characteristics in CO/PA correspond to the characteristics in InfoCubes
d. The value fields in CO/PA can be regarded as key figures with additional summarization
in each characteristic
e. Line items in CO/PA can be compared to line items in the ODS
13: For what type of CO/PA data source can selection criteria be used to implement a delta
scenario?
a. Cost based
b. Time based
c. Account based
d. Value based
e. None of the above
14: Which of the following tables can be created for a ledger in FI/SL?
This question has only one answer.
a. Aggregate tables
b. InfoCube level tables
c. Line item level tables
d. Summarization level tables
e. Totals tables
15: Which of the following data is it better to load first?
a. Attributes
b. Hierarchies
c. It does not matter
d. Text
e. Transactional data
f. None of the above
16: In which of the following do you specify TRFC or IDOCs?
a. Transfer method tab
b. Update rules
c. Transfer rules
d. BEx Analyzer
e. None of the above
17: Which of the following describes a Result Set query?
a. A nested query where the results of a first query are used as entry values for a second
query
b. A query using flat tables (ODS object or InfoObject)
c. A prequery
d. There is no such thing in SAP BW
e. None of the above
18: What step do CO/PA, LO extraction, and LIS extraction methods have in common when
setting up delta management of uploads?
a. On the scheduler you activate a full upload
b. On the scheduler you initialize the delta upload
c. Setup of delta tables
d. The delta is managed in the service API
e. The InfoStructure tables are used
f. VBDATA and ARFCSDATA tables
19: What is the procedure for the LIS delta update?
a. There is no delta update in LIS
b. u201CGenerate updatingu201D regenerates the update program and ensures that a delta update
is possible
c. Activate u201Cdelta updating in the LISu201D setting in the report u201CRMCSBIWCu201D
d. The active delta table is defined in u201CTMCBIWu201D
e. None of the above
20: According to which of the following levels can the DataSource replication occur?
a. Application component
b. DataSource
c. Extract routines
d. Hierarchies
e. Source system
Would be really grateful.
Regards,
ShahzadHi,
Some confirm answers from my side:-
1: Which of the following refer to pointer tables that provide the technical link to the master data outside of the InfoCube?
a. Dimension tables b. Set IDs c. M tables d. SID tables e. ODS transparent tables
2: Which of the following statements describes a categorical dimension? a. An artificial dimension used to describe the status of another dimension b. An artificial dimension/attribute used to categorize another dimension c. An artificial dimension used in a reporting scenario where the comparison of the same key figure is needed d. A dimension that is used across all cubes e. None of the above
3: Which of the following is an example of a slowly changing dimension?
a. Customer on a sales order b. Date c. Person responsible for a cost center d. Value of a purchase order e. None of the above
4: Which of the following occurs as a result of degenerating dimensions? a. The grain of the fact table represents actual working documents like order number or invoice number b. All descriptive attributes of the grain are located in other dimensions c. The InfoCube becomes very weak and performs poorly when it is run d. The degenerating dimensions cannot be modeled using normal star schema e. None of the above
5: Which of the following describes an unbalanced hierarchy? a. A hierarchy with too many leaves within one branch b. A hierarchy with fewer nodes within one or more branches c. Hierarchy without leaves d. The term used for data that are delivered from two or more sources on different aggregation levels e. None of the above
6: Which of the following represents a characteristic that spans an entire data model and upon which all other entities are dependent? a. Many-to-many relationship b. A degenerated characteristic c. A strong entity d. An attribute e. A data model characteristic
7: When should an attribute be placed in a separate dimension? a. Always b. If the attribute changes frequently c. If the attributes have a large number of distinct values d. Never e. None of the above
8: Which of the following objects keeps the aggregate and InfoCube in sync? a. Dim pointer b. Read pointer c. SID pointers d. Surrogate pointer e. None of the above f. All of the above
9: Which of the following statements are not correct about the PSA? a. Created for each communication structure b. Transfer rules have been applied c. You can load from the PSA to an InfoCube d. Queries can be generated from the PSA e. None of the above
10: In which case can you not use aggregates in SAP BW? a. Attributes of time-dependent characteristics b. Slowly changing dimensions c. Hierarchy structure d. Degenerate dimension e. None of the above
11: What does the Data Changes Aggregate Update Program do? a. Activate all hierarchies and attributes b. Generate all aggregates affected with a new change ID c. Set the pointers to the right change ID d. Roll up all aggregates that have been changed since the last update e. None of the above
12: Which of the following are correct concerning CO/PA? a. Summarization levels for an operating concern have the same function as aggregates for an InfoCube b. CO/PA summarization levels are managed by the InfoCube, and always contain the same numbers as the InfoCube that they are based on c. Characteristics in CO/PA correspond to the characteristics in InfoCubes d. The value fields in CO/PA can be regarded as key figures with additional summarization in each characteristic e. Line items in CO/PA can be compared to line items in the ODS
13: For what type of CO/PA data source can selection criteria be used to implement a delta scenario? a. Cost based b. Time based c. Account based d. Value based e. None of the above
14: Which of the following tables can be created for a ledger in FI/SL? This question has only one answer. a. Aggregate tables b. InfoCube level tables c. Line item level tables d. Summarization level tables e. Totals tables
15: Which of the following data is it better to load first? a. Attributes b. Hierarchies c. It does not matter d. Text e. Transactional data f. None of the above
16: In which of the following do you specify TRFC or IDOCs? a. Transfer method tab b. Update rules c. Transfer rules d. BEx Analyzer e. None of the above
17: Which of the following describes a Result Set query? a. A nested query where the results of a first query are used as entry values for a second query b. A query using flat tables (ODS object or InfoObject) c. A prequery d. There is no such thing in SAP BW e. None of the above
18: What step do CO/PA, LO extraction, and LIS extraction methods have in common when setting up delta management of uploads? a. On the scheduler you activate a full upload b. On the scheduler you initialize the delta upload c. Setup of delta tables d. The delta is managed in the service API e. The InfoStructure tables are used f. VBDATA and ARFCSDATA tables
19: What is the procedure for the LIS delta update? a. There is no delta update in LIS b. u201CGenerate updatingu201D regenerates the update program and ensures that a delta update is possible c. Activate u201Cdelta updating in the LISu201D setting in the report u201CRMCSBIWCu201D d. The active delta table is defined in u201CTMCBIWu201D e. None of the above
20: According to which of the following levels can the DataSource replication occur? a. Application component b. DataSource c. Extract routines d. Hierarchies e. Source system
Regards,
Prakash -
How to pass parameter in Discoverer inner query PLZ give solution-URGENT
Hi All,
My need is I have a query in Disco Admin which has inner query as mention below:
select Net_Drawn_Amount,Undrawn_Amount,Business_Date from
(select * from t_FacilityExtract) A,
We are creating a workbook using Diso Plus and creating a parameter on Business_date which is date partitioned, but issue is in inner query(select * from t_FacilityExtract) is picking whole data which has millions of rows.
Plz help me how to filter inner query.
It is just a sample query.
Plz help me as soon as possible.
Thanks in advance
AmitHi,
Generally, using database contexts is the best way to pass parameters to folders defined in Disco Admin. You can look at this posts or download a article on using contexts with Discoverer from my website (www.cabotconsulting.co.uk).
Re: Implementing HR report in Discoverer
Re: Passing multiple parameters into Custom Folder...
Re: Parameters in SubQuery
Re: Passing Parameters to a discoverer folder using Note 282249.1
Rod West -
SAP PS Training & Certification Query
Hi,
I have 6.5 years of experience in PMO activities. I have done my PMP certification. I have worked on MSP and Primavera. I want to continue my career in project management only. My query is whether SAP PS certification will be any helpful for me and if yes then am i eligible for this ? How the training & certificate will help me for my career growth in project management ?
Thanks,
Suman BakshiHi,
I have 6.5 years of experience in PMO activities. I have done my PMP certification. I have worked on MSP and Primavera. I want to continue my career in project management only. My query is whether SAP PS certification will be any helpful for me and if yes then am i eligible for this ? How the training & certificate will help me for my career growth in project management ?
Thanks,
Suman Bakshi -
I already have 2.5 years exp. in ABAP and planning to do certification.
I am taking preparation by studying TAW10 and TAW12 e-books and practicing test in http://codeexcellence.com/.
I donu2019t want to join any institute and want to clear the exam C_TAW12_04, directly through Siemens.
Can anybody inform me in details, about the process.Hi...
I hope this ll be helpful to you.
http://www.sapcertification.info/viewpage.php?page_id=48
Plz go thru the site, its really nice info about SAP certification.
Rewards point if useful.
Thanks & Regards
vinsee -
17.
hi iam preparing for certification
Consider the following query:
SELECT deptno, ename, salary salary, average,
salary-average difference
FROM emp, (SELECT deptno dno, AVG(salary) average FROM emp
GROUP BY deptno)
WHERE deptno = dno
ORDER BY 1, 2;
Which of the following statements is correct?
1. The query will fail because no alias name is provided for the subquery.
2. The query will fail because a column selected inside the subquery is referenced outside the scope of the subquery.
3. The query will work without errors.
4. GROUP BY cannot be used inside a subquery.
ans:c
when i execute the above query iam receiving an error at line 6
why?
thank u
rajivAs a sidenote, the select works on 10g1.
WITH emp AS (SELECT OBJECT_id deptno, OBJECT_name ename, OBJECT_id salary
FROM user_objects)
SELECT deptno, ename, salary salary, average, salary - average difference
FROM emp, (SELECT deptno dno, AVG (salary) average
FROM emp
GROUP BY deptno)
WHERE deptno = dno
ORDER BY 1, 2;C. -
Hi,
I am planning to do XI 7.0 certification. But I am not sure of how to approach for the certification. Have many questions in mind.
1. How can I book a date for the exam, I tried to find out in SAP website but it shows info about its training facilities in Australia but have no info on the certification centres.
2. Where can I find the material.
3. Any usefull info regarding certification i.e. the type of questions and how long would it take to prepare for the exam..
4. Any usefull material and valuable sujjestions.
5. I am trained in XI 3.0, any sujjestions on would it be good to be certified for 3.0 or 7.0 any differences b/w them.
I would be very gratefull if my questions would be answered and due points would be awarded as well
Thanx in advance
PrabhaHI,
1. How can I book a date for the exam, I tried to find out in SAP website but it shows info about its training facilities in Australia but have no info on the certification centres.
In India, one way to take XI certification would be to attend the SAP provided training for XI. I dont know the cost of training for the same, but I know that SAP allows you to take up one attempt for the XI certification after the training without extra costs.
If you want to take up the XI certification without any training by SAP, then you will have to provide a certificate from your employer that you have the requsite experience in XI and SAP.
Once you had send all the details then you could take the date for SAP certification.
/thread/187737 [original link is broken]
2. Where can I find the material.
The TBIT41 study material will be available with Authorized SAP Training Institutes. But you can search on internet for similar kind of study materials.
Plz go thru XI elearn materials..
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]
Further, follow this link, it will show you on which topics you have to concentrate more...
SAP XI Certification - Important Topics
3. Any usefull info regarding certification i.e. the type of questions and how long would it take to prepare for the exam..
Mostly the Certification questions are based on real time XI developments, so I would suggest to have more practice for the certification. Theoritical knowledge cant take to clear XI certification.Because you should have a hand on the product before appearing for the certification.So i ll strongly recomment you to install and learn XI before taking up the certification.
You should unleash the functionalities given by SAP XI and then if you take up certification , you can come out with flying colours.
these threads are useful for u.
1. SAP XI Certification - Important Topics
2. Regarding XI Certification Material.
3. Xi sample Certification questions
refer below links for sample questions
Sample Questions
/message/1499223#1499223 [original link is broken]
XI Certification
Need XI certification information
4. Any usefull material and valuable sujjestions.
You will find a whole lot of info and material(free downloads) regarding XI and the certification on sdn. Not on the forums directly, but inside "blogs", "learning", etc. Since you are planning to give the exam within the next two weeks, I suggest you to read and follow the tbit learning material thoroughly. Also, help.sap.com has the entire documentation required for SAP XI. If you want to check out some of the scenarios and some special cases...like content conversions, multi-mappings, read the blogs on these topics.
The forums are preferable if you want a clear idea about some topic in particular or if you want help in configuring some particular scenario.
Check this "Assessment and Results " under SAP Certification Policy:
https://websmp204.sap-ag.de/~sapidp/011000358700003517532005E
Also check this on SAP certification result timeline:
http://www.sap.com/southafrica/services/education/Certification_pre_exam.pdf
5. I am trained in XI 3.0, any sujjestions on would it be good to be certified for 3.0 or 7.0 any differences b/w them.
As such there are not more differences in XI3.0 and 7.0
There is not much difference between XI 3.0 with latest Service Pack i.e. 20 or 21 and PI 7.0
The main difference between 3.0 and 7.0 is the GUI in SLD. But, it is pretty easy to adopt. All other components, e.g. IR, ID, RWB, should virtually be identical.
7.0 also contain some SCM contents not available from 3.0. For most of us, this is a non-issue.
In 7.0 we can schedule a background job and edit the payload.
XI3.0 is based on WAS(web application server)6.40 - NW2004
PI7.0 is based on WAS(web application server)7.0 - NW2004's
Service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04
SP13 + 14 - SP05
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09
ref:http://help.sap.com/saphelp_nw04/helpdata/en/cf/9844428e9cbe30e10000000a155106/frameset.htm
See This Thread on the Same Discussion
Diff between XI and PI
http adaptor on which factors we will use
differences between xi 3.0 and pi 7.0
Thanks
Swarup -
Order by problem in my query - plz help me out
Dear all,
I have a query like this,
Select Booking_No, Get_Bl_Number (Booking_No) Bl_No, Depot_Code
From Booking_Table
Where Booking_Mode = 'B'
Order By Depot_Code, Bl_No, Booking_No
i need the output like NULLs of Bl_No should come first..ie.,
DEPOT_CODE BL_NO BOOKING_NO
DEPOT01 BOOKING01
DEPOT01 BL01 BOOKING02
DEPOT03 BL04 BOOKING03
DEPOT04 BOOKING04
DEPOT05 BL05 BOOKING06
since am using the function to get the Bl_No, am not getting the NULLs first...kindly help me out
Thanx and Rgds,
M ThiyaguYou can use like this:
Order By
Depot_Code,
Bl_No nulls first ,
Booking_No -
Oracle 11g Certification Query
Hi all,
I have given my Oracle 11g exams for OCP certification. Now, i need to take one of the mandatory training to fulfill the requirements for certification. I am in Kuwait and when i select the country as Kuwait, the cheapest training course is of $1230. I am an indian, so when i select the country as India on the oracle site, the price reduces down to $540 for the same course. This is for the Live Virtual Class (LVC) rates. Can i book the LVC with India as country. Do I have to be present in India for the LVC training or only taking a course is compulsion.
Kindly advice.Zuzar Sajjad Tutawala wrote:
Hi all,
I have given my Oracle 11g exams for OCP certification. Now, i need to take one of the mandatory training to fulfill the requirements for certification. I am in Kuwait and when i select the country as Kuwait, the cheapest training course is of $1230. I am an indian, so when i select the country as India on the oracle site, the price reduces down to $540 for the same course. This is for the Live Virtual Class (LVC) rates. Can i book the LVC with India as country. Do I have to be present in India for the LVC training or only taking a course is compulsion.
Kindly advice.If you take LVC training my understanding, and it has been discussed in previous threads, if you need to be prsent in the country from which hte LVC is being presented. So if you want to take it in India you will need to travel back there. -
Help me in writing this query plz....
There are two tables - Table1 (table1_id, value1) and Table2 (table2_id,
table1_id, value2). The field Table2.table1_id is a foreign key to
Table1.table1_id. It is necessary to write a SQL query that would find
all records in Table1 that do not have a corresponding record in Table2.
The query should not use sub-selectsuser554495 wrote:
Can you provide me the queryNo, we're not about to do your homework for you. How do you expect to learn anything if all the answers are served to you on a silver platter?
Try and work it out for yourself; if you get stuck, we'll try and help from that point, but you'd have to provide the sql queries you've tried (along with table information and sample input and expected output data). -
Help with mysql query plz anyone i am begging!!!
Hi everyone pls forgive me i am new to java. can someone pls tel me where i am going wrong wit this mysql query?
<sql:query var="parish" maxRows="1" dataSource="jdbc/gav">
SELECT ParishName, OwnerOccupierHousehold, OwnerOccupierPercOfOverall, OwnerOccupierCo2Emissions,
SocialRentedHousehold, SocialRentedPercOfOverall, SocialRentedCo2Emissions, PrivateRentedHousehold,
PrivateRentedPercOfOverall, PrivateRentedCo2Emission, TotalHouseholds, TotalPerc, Average,
Total2001, TotalEstimatedTotal2006, EmissionsPerPerson, EmissionPerHousehold, EmissionsPerParish,
EnergyChampionsNeeded, NumberOfPeopleAtWork, NumberOfSchoolAgeChildren
FROM base_data as b
WHERE b.id = ? <sql:param value="${param.id}"/>
<sql:param value="${param.id}"/>
</sql:query>
<c:set var="parish" scope="request" value="${parish.rows[0]}"/>
here is the error i get:
java.sql.SQLException: Parameter index out of range (2 > number of parameters, which is 1).
please any help would be appreciated!!! Thanks in advance guys .here is my code for the form on the index page:
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<%@taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql"%>
<sql:query var="parish" dataSource="jdbc/gav">
SELECT id, ParishName FROM base_data
</sql:query>
<form action="response.jsp">
Select a Parish: <select name="id">
<c:forEach var="parish" items="${parish.rows}">
<option value="${parish.id}">${parish.ParishName}</option>
</c:forEach>
</select><br><input type="submit" value="submit" name="submit" /></form>
here is the code for the response page:
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<%@taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql"%>
<sql:query var="parish" maxRows="1" dataSource="jdbc/gav">
SELECT b.id, b.ParishName, b.OwnerOccupierHousehold, b.OwnerOccupierPercOfOverall, b.OwnerOccupierCo2Emissions,
b.SocialRentedHousehold, b.SocialRentedPercOfOverall, b.SocialRentedCo2Emissions, b.PrivateRentedHousehold,
b.PrivateRentedPercOfOverall, b.PrivateRentedCo2Emission, b.TotalHouseholds, b.TotalPerc, b.Average,
b.Total2001, b.TotalEstimatedTotal2006, b.EmissionsPerPerson, b.EmissionPerHousehold, b.EmissionsPerParish,
b.EnergyChampionsNeeded, b.NumberOfPeopleAtWork, b.NumberOfSchoolAgeChildren
FROM base_data as b
WHERE b.id = ? <sql:param value="${param.id}"/>
</sql:query>
<c:set var="parish" scope="request" value="${parish.rows[0]}"/>
i display the results like this : ${parish.EmissionsPerParish}
the user should be able to select a parish from a form and then sql query created and then i want to show the row results on the response page.
could you tell me where so should be a simple process although not simple enough as it may seem.
thanks for the advice keith -
Hi,
I wanted to know what is the exam pattern for a Fi course ? and what is passing marks for the certification.
I found a few answers on the threads but they were dated almost 2 years back. I was wondering what is the current pattern followed in the exam.
Any help will be very highly appreciated.
Thanks,
PrayasHi prayas,
the fi certification exam pattern is of objective type, and passmark is 66% , for further information u can check in the following sites
http://www.sap.com/services/education/certification/
regards,
ram -
Hi there,
I wanted to ask whether the following material is still applicable to prepare for Exam 70-513:
MCTS Self-Paced Training Kit (Exam 70-503): Microsoft® .NET Framework 3.5—Windows® Communication Foundation
Is there a reason why this hasn't been updated yet? Can anyone suggest alternative materials that Microsoft have?
I only found few examples on the MSDN forum. Currently i am reading WCF book that was written by a third party.
Secondly, do candidates get informed what the format of the exam will be on day of the exam? Or do they not get informed about the exam format at all?
Kind Regards,Thanks for the link.I clicked on the link and it states the following:
Credit towards certification: Microsoft Certified Technology Specialist (MCTS), Microsoft Certified Professional
Developer (MCPD)
Does that mean if i complete the course i won't get a certificate? Also does it mean i have to pass several exams to achieve MCTS or MCPD? -
CRM 5.0 certification query?
Hi,
I just spoke to SAP UK regarding CRM Marketing certification CR600. They do CRM 5.0( not CR 4.0) & no prerequesite like certifaction in base customisation ( though it is advisable ). So we can straightway do CR600
I have been practising in CRM 4.0 version.how different is CR5.0 in terms of going thoruh pdfs & other settings?
One thing more, what is the difference between Associate Certification(fee is £350 +vat) & Professional certification ( fee is £430 + vat ).
Your prompt reply will be highly appreciated.
regards.
thanks.
AnilHi,
there is slight technical difference and delta enhancements available in version 5 from ver 4. However, I didn't find it much different when it comes to certification exam. I practiced a lot in version 4 (as that was only available when I practiced) and attended exam in version 5 and got certified too. You should be able to find delta documentation easily in SAP's own website.
On the website, help.sap.com go to
bestpractices--> crossindustry --> crm --> v240 --> BBLibrary --> Documentation --> B08_DeltaGuide_EN_US.doc
This explains about configuration delta.
Hope, this helps.
Regards
Gopala Turaga
Maybe you are looking for
-
Dead pixels on Macbook Pro Retina Display and keyboard scratches.
Since the purchase of my Macbook Pro with Retina Displey 15" early February 2013 it has gained 5 dead pixels on the screen. If I take it to the Apple Store are they going to tell me it's my own fault and not help? I also found a scratch on the <H> ke
-
Trying to go legit, but it's not working
I've just recently purchased Final Cut Studio 3. It wasn't directly from Apple, but a third-party retailer: www.cheapestlegalsoftware.com. It seemed (and still seems) legit (or so I hope). I've installed the Studio and all programs run fine except fo
-
EBS for MT940 - Auto clearing of Clearing G/L Open Item.
Hi, I am implementing EBS. I have done all the configuration settings but somewhere I think one or two settings I have missed. First, I want to explain my scenario: When we receive payment from Customer to the Bank Clearing account based on the pa
-
Setup tcp connection to external oracle database
Hello All, I have a requirement to setup a tcp connection in SM59 from BI 7 to an external oracle database. I am through with the first step of modifying the tnsnames.ora and now I am able to connect from OS level of BID server to this external oracl
-
Adobe Camera Raw 6.1 RC build available on Adobe Labs
Please check out http://labs.adobe.com/wiki/index.php/Camera_Raw_6.1. Release Notes Newly supported camera models include: Canon EOS 550D (Digital Rebel T2i/ EOS Kiss X4 Digital) Kodak Z981 Leaf Aptus-II 8 Leaf Aptus-II 10R Mamiya DM40 Olympus E-PL1