Certifications for Domain EHS Domain Knowledge

Hi All,
I am currently working with an leading Software MNC as an SAP EHS Consultant - Product Safety Sub module and would like to get more domain knowledge in this area.
I am interested in knowing there are any certifications which would give me domain expertise in EHS. I came across NEBOSH International General Certificate so wanted to know more about the scope of taking such a certificate.
if any one has taken such a certificate, do share your experiences.
Thanks,
Gaurish

Dear Gaurish
check e.g.: SAP EHS Management for Beginners
Most of your topics is considered in this thread like:
1.) is there a certification (Answer: no)
2.) there to start with EHS/EHSM?
3.) What ar job opportunities?
4.) What are training options
etc.
C.B.
PS: if your question is not related to SAP EHS etc. certification: I am sory to say that the world is to big to explain what you might need here (there are too many different isuues/toics to cover). To my knowlegde there is nothing in place which is accepted "globally". You need to differentiate product safety topics, dangerous goods m,anagement topics, topcc regarding IHS,, waste handling etc.
I have "shortly" googled the term "NEBOSH International General Certificate" (and found something like
Qualifications | Nebosh
International General Certificate in Occupational Health and Safety --- NEBOSH Online Store
NEBOSH - Wikipedia, the free encyclopedia
Nether heard before. Therefore if or if not this certificate might help you to find a job opportunity: no idea; But it seems to be related more on the "business/legal" side rather than linked to SAP EHS topics.

Similar Messages

Importance of Certification for Domain Change

Hi,
I have two years experience in development in .Net technologies in a reputed MNC. After that I took a break for personal reasons and now am planning to get back into the industry. During that period of work, i had taken part in a "boot camp" carried out by my company itself in SAP PI/XI 7.1, which perked a lot of interest in me towards SAP. Domain change, unfortunately, was not encouraged in my company, at least at my level.
I am now looking forward to doing Certification in a SAP module. I have a few questions.
1. Even though I have coding experience, will I be counted as a fresher, since it is not in SAP technologies? I think Certification is important towards improving my chances in improving my chances in securing a job as a SAP consultant?
2. I am leaning more towards functional modules than technical. My work exposed me more towards communications end, especially mobile app development, can any one suggest a good module i should look into? I liked SAP PI/XI since including a bit of coding as well, which i though would be good for me since i have experience in that domain, but some consider it as an advanced module, so I'm really not sure.
Thanks and regards,
Arnab

Hi Arnab,
1. As far as SAP is concerned, you would be considered as a fresher. However, your .net experience would be some handy. SAP Certification may help to market your CV being a fresher. At the end of day, whether you have Certification or not, you need to show case and prove your abilities in the interview.
2. Particularly, mobile technologies have good demand. You should follow the mobile technology space on SCN. There are some wonder people in this area, I am sure, they would be able to advise you in more details.
Hope this helps.
Kind Regards,
Ravi

Is domain knowledge required for SAP

Hi all,
I would like to start my career in SAP.My friends said that domain knowledge is important for SAP ABAP OR XI,please suggest me
1.which is the best way to start my career in SAP
2.How to learn domain knowledge
3.what are the basic things to be strong to get into the world's biggest market .....SAP and cope up with ABAP or XI
I hope SDN is the best helper for any SAP consultant.
Thanks,
Kumar.

Dear Kumar.P,
You have a good wish, But you didn't let us know what is your education back ground.
If you are a computer graduate and got good knowledge on programming languages jump in a technical consultant. You can do this by learning ABAP and Netweaver XI or Java Programming + Netweaver XI or Netweaver with Java and ABAP is good.
If you don't have computer programming knowledge and got domain knowledge about any of the modules, then learn that particular domain base SAP module.
Best of Luck for you future.
Regards
Praveen

Opportunities of E-Commerce Domain Knowledge in SAP

Hi Experts,
Please let me know the opportunities of E-Commerce / Ecommerce Domain Knowledge in SAP world. What kind of experiences / duration of experience on E-Commerce are suitable for your suggested SAP Module / Area?

Hello Harinarayan,
There could be many approach for doing this thing. We have implemented similar scenarios in 2-3 companies. We have followed following approach:
a) Generate and send email from the website to a particular email address.
b) Configure one computer to receive these emails in outlook
c) Run a program, written in VB, using DI-API, to parse the emails and create appropriate entries in B1
d) Create a separate program and run it to update the website database.
This approach has been good for us, as it do not require dedicated internet connectivity on B1 server, which will be required when using SOAP, or DI-Server. It could easily be configured to run automatically after a fixed interval of time, so that it does not require any manual intervention either.
I would happy to share the ideas and coding for this, if required.
Rahul Jain

SAP CERTIFICATION FOR EHS

Hi,
This is satya i want know about SAP EHS certification & course details in Hyderabad can anybody help me
Message was edited by: Colleen Lee - moving from Careers to Certification space

Dear Vinod
any of your question have been still addressed here. Check: SAP EHS Management for Beginners
Coming back to your questions:
1. Considering my profile can you give your honest opinion weather this would be the right time for to do the training in SAP EHS? => Currently there is a "hype" with Component Extension for SAP EHS Management; you will find job opportunities if you just use "google" and other platforms
2. I was told by one of the training institutes, based in Chennai, that currently there is no SAP Certification Exam for EHS, is this true? => yes: no certificate
3. What is the present Job Scenario for SAP EHS freshers in India & abroad, how one can target the global market? => refer to answers above; many companies do have locatons in India which deal with SAP (and SAP EHS as well); job opportunities come and go especially in area of EHS
4. Is online SAP EHS training advisible as i am short of time due to the work challange. => I do not have any experience with the online trainings; based on feedback of the community: training options in India seems to be limited, expensive and sometimes will not help for your career
5. Is thier only SAP EHS or something else & does SAP EHS covers the market requirement.
For Chemical industry (and related businesses) as well knowledge in SAP GTS is asked for often; Knowledge in the area of SAP BW and similar areas is helpful (topic of "EHS reporting" of any kind)
C.B.

ACL migration Error : 1210 could not find a domain controller for domain "Test Domain" (Old Domain)

Hi
We are migrating from old domain to new domain. Before live migration, we are trying to check the ACE/ACL migration through SubInACL. We are running the SubInACL on a cluster, which is a member of the Old Domain (Test Domain). We are able to resolve and
ping both Old Domain and the New domain from this cluster machine. We have created a network share on this cluster, which is accessible to all Domain Users of the Old Domain. Both Domains have two way forest level trust. we are trying to migrate
the ACL of this share (\\ClusterMachine\testshare$) to the new domain using SubInACL. We are trying to run the below command to get it done.
subinacl /outputlog=C:\Users\Administrator\Desktop\Migrationlog.txt /subdirectories
\\ClusterMachine\testshare$\*.* /migratetodomain=OldDomain=NewDomain=mappingfile.txt
Mapping file contains : Domain Users=NewDomain_Users
But we are geeting the Error that "1210 could not find a domain controller for domain "Test Domain". Error finding domain name : 1210 the format of the specified computer name is invalid. Current Object "\\ClusterMachine\testshare$"
will not be processed."

Hello,
how in detail is DNS set up in each domain?
Any problems when using nslookup to verify?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Yoga 2 Pro - Win 8.1 x64 Pro - VeriFace doesn't work for Domain accounts

First - Lenovo's own tech support team seems completely unprepared for this product. There are no install packages online for anything but core drivers and the support teams really don't know much about the custom Lenovo software like VeriFace. Not bashing, just a disappointing reality. I'm hearing Lenovo does this all the time and that in a few months, stuff will appear. Great.
REAL issue: VeriFace won't work for Domain accounts. Pure and simple. I'm a geek, so I know the right account name shows up at the lock screen. When I type in the password, it says Incorrect. If I use a local account, bingo, works perfectly. I Googled some notes back in 2008/2009 where some people found a work-around by creating a local account with the same login name (obviously without the "domain\" part) to trick VeriFace. I tried it and it didn't work.
Can anyone else confirm this?
p.s. I tried uninstalling / reinstalling and you DON'T want to do that. See my first point. You can't re-install b/c the software ONLY exists in the hidden reset partition in OneKey Recovery. You have to completely reset your PC in order to get it back.

Confirmed. I even tried this trick, but this did not work for me
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/VeriFace-with-XP-Domain-Accounts-Upside-dow...

Guidelines on whether we should go for 'domain concept' in SAP BI

Hi,
Can anyone share the guidelines/best practices on whether one should go for domain concept in BI implmenetation or not? Ours will be a consolidated global sales warehouse and we do not experience that many data load failures. What are the advantages one gets if one uses domain? When should domain not be deemed necessary?
Thanks and regards,
R

Could you please elaborate what you mean by domain concept?

Anyone Seen this Message Before "Configuration changes for domain saved to the repository."

I'm running into this situation where one of my WLS servers is generating the following
messages "Configuration changes for domain saved to the repository." This process
of saving to a repository is causing an issue on start-up. Typically my deployments
take 2-3 minutes on start-up. They are now taking 10 minutes. I've made no changes
to my application. I've been able to identify that this process of saving to a
repository is the main issue of contention....
Anyone know what the message means? Anyone know how to disable this message?

This is just WebLogic writing back changes to config.xml, which it does from time
to time for reasons like:
- your app deployment has changed.
- you've reconfigured something in the console.
etc...
WebLogic just spins this off into a handy execute thread, so it would be surprising
if this was causing your app deployment to slow down (how do you know it is).
In my experience, slower than normal app deployments are usually down to:
- waiting for database connections.
- waiting for connecitons to other external resources.
Remember (in WLS6.x anyway) initialisation is done serially on the main thread,
so if something's slow, everything gets blocked behind it.
simon.
I'm running into this situation where one of my WLS servers is generatingthe following
messages "Configuration changes for domain saved to the repository."This process
of saving to a repository is causing an issue on start-up. Typicallymy deployments
take 2-3 minutes on start-up. They are now taking 10 minutes. I'vemade no changes
to my application. I've been able to identify that this process ofsaving to a
repository is the main issue of contention....
Anyone know what the message means? Anyone know how to disable thismessage?

Finding short text description of Fixed values for value range for domain

Hi,
When I got to Dictionary: Dispaly Domain and click on tab value range; I get the template showing Fix. Val and its associated short text.
I want to fetch the short text for a particular fix. val for a domain.
How can I do that ? What table can I use it ? Or do I need to use some function module ?
Lets say I want to fetch the short text for a given Fix val. for domain VBELN.
Please help me out.

Hi,
You can use Function Module 'FM_DOMAINVALUE_CHECK' to get the fixed values of any domain.
Regards,
Atanu

IDOC for domain function

Hi,
I am looking for some IDOC for the creation of domain function .
(Transaction FM_FUNCTION, table TFKB)
I have not find any yet, do you know how can i fine the IDOC or maybe it does not exist any IDOC for domain function?
Thank you,
Regards,
Zheng

Function modules for converting SAP codes Domain Function module Currency keys CURRENCY_CODE_SAP_TO_ISO Country keys COUNTRY_CODE_SAP-TO_ISO Units of measure UNIT_OF_MEASURE_SAP_TO_ISO Shipping instructions SAP_TO_ISO_PACKAGE_TYPE_CODE I recommend that you encapsulate the code in a SUBROUTINE <SEGMENT-TYP>_CODES_SAP_TO_ISO.

Windows Server 2008 - Group policy for domain client to start/stop services installed on it

Hello Experts
I am a newbie to windows server administration , though did a Google , but ended up with these question with my requirements
I have created a new domain and 2 client/computer (A & B namely) to domain . Now A & B has tomcat server running with port 8080 , 9090 which i have installed
domain ADMIN account .
&& now i am want to start/stop/restart services enabled for domain users !! How do i achieve this !!
basic question : How can i access A & B tomcat services on DOMAIN CONTROLLER server to create a GPO and that are on (A & B)
what is the easiest way to achieve the same , (if not using GPO)???
similarly I am looking for many features : where I want to control the permission to user on (A & B ) like : If the binaries of tomcat is available on machine say : A , if the user can install (now
it ask for ADMIN credentials)
Thanks
Mike~Ed

Controlling services with Group Policy is done under Computer Configuration\Policies\Windows Settings\Security Settings\System Services.
The limitation is that system services can only see the services the computer running the Group Policy management console. To access other services, you will either need to create the services on your computer (install the software the adds the service)
or install the remote server administration toolkit (RSAT) on the computer with the service already on it.
If my answer helped you, check out my blog:
Deploy Happiness

Windows 2012 Verification of prerequisites for Domain Controller promotion failed

Windows 2012 Verification of prerequisites for Domain Controller promotion failed and gave the below error(In computer management local group and user option is not there as suggested by a solution!)
"Verification of prerequisites for Domain Controller promotion failed. The local Administrator account becomes the domain Administrator account when you create a new domain. The new domain cannot be created because the local Administrator account password
does not meet requirements.
Currently, the local Administrator password is blank, which might lead to security issues. We recommend that you press Ctrl+Alt+Delete, use the net user command-line tool, or use Local Users and Groups to set a strong password for the local Administrator
account before you create the new domain."

OK, the reason you see this error is because when you set up and configured your Windows R2 environment you may have logged into the OS with an account other than Administrator. So, if you created your log in account named Bob, this is throwing off the Server.
So, hit Ctrl-Alt-Delete, and look who you are logged in as, and then change the account you are logging in as and use the local Administrator account. What you may find is that the default Admin account password has not been set.
Check that out and see if that is what you are experiencing.
Best wishes

No windows identity for Domain Name\User

I have recently upgraded SharePoint 2013 farm from RTM to SP1. I am repeatedly getting errors No windows
identity for Domain Name\User in ULS log. Some users who was earlier able to access to site is not able to access site.
Please remember to mark the replies as answers or vote as helpful if they help.

Few questions to quickly check with you..
1. Have you re-run your SharePoint Configuration Wizard after you upgraded from RTM to SP1? Its very important to re-run SharePoint Configuration Wizard to ensure SharePoint Config DB is updated with latest changes in the farm.
2. If you have performed the above step but still face issues, have you restarted your SharePoint Server after re-running your SharePoint Configuration Wizard? If not please restart the server.
3. If not anyone of the above, then have you changed your authentication type for your web application in Central Admin. Example, from Classic Authentication to Claim Based Authentication?
Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you.

Remove Send-As for domain admin groups

With referring to below link.
http://social.technet.microsoft.com/Forums/exchange/en-US/d2e97e64-536a-4c46-8e57-e0ac6a4ad64e/how-do-i-remove-domain-admins-send-as-settings-for-all-users?forum=exchangesvradminlegacy
The solution work perfectly for normal user but for user whose member of Domain Admin as well, the send-as will revert back from Deny to Allow after a while.
I have a user who member of domain admins group, say User A. Since we want to remove the send as for all users (including User A), I did followed the steps, Denied Send-As for Domain Admins group for User A.
However, after for while it return back to Allow.

The permissions on members of special groups is managed by the AdminSDHolder and SDProp.
http://technet.microsoft.com/en-us/magazine/2009.09.sdadminholder.aspx
The way to deal with this is to give your domain admins (and any other admins) a separate account and to remove their "normal" account from any privileged groups (and to reset the adminCount property and "allow inheritance" on the "normal" account). Do NOT
give the admins a mailbox.
If you can't do that, then deny the Domain Admins group the "Send As" and "Receive As" permission at the organization level in the AD's configuration container. Use ADSIEDIT to do that here:
CN=<Organization>,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=<domain>,DC=<tld>
--- Rich Matheisen MCSE&I, Exchange MVP

Certifications for Domain EHS Domain Knowledge

Similar Messages

Maybe you are looking for