Certifiction code for sap mm

hi gurus
plssssssss let me know the certification code for MM,so that i can book for the exam.
urgent

SAP solution consultant certification in SCM-Procurement with software component ECC 6.0
REgards,
Subha

Similar Messages

  • Transaction code for SAP query reports

    Hi All,
    I am trying to create transaction code for sap query report but couldn't go further.
    1) Created User group in SQ03
    2) Created infoset in SQ03 and assigned that to the user group
    3) Created query in SQ01 using the infoset.
    I executed the report in SQ01 and it is working fine.
    Now I try to create a transaction code in SE93 using the steps mentioned in the following link:
    Assign transaction code to SAP Query (created via SQ01)
    But when try to execute the report using the transaction code, it is giving error message 'User group xxxxxx is not yet created'
    Could any one advice me if I miss something? Or please help me to create this transaction code and transport to production?
    Thanks in advance

    HI,
    based on the thread you've already mentioned:
    In SE93, Create a Paramter Transaction
    -> Transaction = Start_report
    -> In default values, give the below details:
    D_SREPOVARI-REPORTTYPE = AQ
    D_SREPOVARI-EXTDREPORT = Name of the Query
    D_SREPOVARI-REPORT = User Group
    So check if the user group is typed correct in SE93 and check also if the user group exits in the system where you are trying to run the transaction.
    best regards, Christian

  • Abap code for sap exit variables?

    Hi,
    i) Where can I find the abap code for SAP exit variables
    OP_KEYDT used for the net due date
    OP_KEYD2 used for the posting date
    OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
    Based on the Net Due Date, which  is key date(0NETDUEDATE),  entered by the user at runtime, the posting date and celaring date are populated.
    II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom  Net Due Date(ZNETDUEDATE).And this date is populated to posting date and  clearing date variables.
    How do we acheive that.
    Thanks.

    Please tell how u solved ur issue i have the same scenario to be do.

  • ABAP  Code for SAP exit varaibles?

    Hi,
    i) Where can I find the abap code for SAP exit variables
    OP_KEYDT used for the net due date
    OP_KEYD2 used for the posting date
    OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
    Based on the Net Due Date, which is key date(0NETDUEDATE), entered by the user at runtime, the posting date and celaring date are populated.
    II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom Net Due Date(ZNETDUEDATE).And this date is populated to posting date and clearing date variables.
    How do we acheive that.
    Thanks.

    Hi Kumar,
    Try this below mentioned example where default date is current date.
    Step1: Create a variable(ex: cur_date) on requrired characteristic with Processing type "Customer Eixt" and check the check box for ready for input(if this variable need in selection screen).
    Step 2: Goto T Code : CMOD and provide appropriate Project and choose components and click on display.
    Step3: Double click on exit "EXIT_SAPLRRS0_001" you can see include "ZXRSRU01", double click on include.
    Step4: Sample code to populate.
    WHEN 'CUR_DATE'.
    Data : l_p_range_SSS TYPE rrrangesid.
    IF I_STEP = 1.
    l_p_range_SSS-Low = sy-datum.
    l_p_range_SSS-Sign = 'I'.
    l_p_range_SSS-Opt = 'EQ'.
    APPEND l_p_range_SSS TO e_t_range.
    Endif.
    The following values are valid for I_STEP:
    · I_STEP = 1
    Call up takes place directly before variable entry
    · I_STEP = 2
    Call up takes place directly after variable entry. This step is only started up when the same variable could not be filled at I_STEP=1.
    · I_STEP = 3
    In this call up, you can check the values of the variables. Triggering an exception (RAISE) causes the variable screen to appear once more. Afterwards, I_STEP=2 is also called up again.
    · I_STEP = 0
    The enhancement is not called from the variable screen. The call up can come from the authorization check or from the Monitor.
    Also, refer this link..
    http://help.sap.com/saphelp_bw320/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/content.htm
    Cheers,
    Allen

  • How can i get access code for SAP 4.7 IDES version ?

    How can i get the access code for SAP 4.7 IDES version ?
    Thanks

    Hello Rahul,
    If you have registered / licensed IDES Version.
    You can generate Access code for Developer / Objects from http://service.sap.com/sscr
    Regards ,
    Santosh Karadkar

  • What is the Exam code for SAP EP Technical Exam

    Hi All,
    I did't find the code for SAP EP Technical.
    I would like to know the exam code for SAP EP Technical.
    Please reply with the exam code and topics.
    Thanks
    Ravi Sankar Karri.

    https://websmp108.sap-ag.de/~sapidp/011000358700002412512003#devc
    Hope this helped you.
    If so kindly reward points

  • Question on creation of t-code for SAP query

    Hello,
    I posted a thread in here back on 06/20/2007 asking for help on creating a t-code for a SAP query. one of the responses that I recieved was
    <i>"Sure, all you need to do is get the report name which is generated by the query. You can find this in SQ01, select the query and from the menu, Query, More Functions, Display Report name. Then go to Se93 and create the tcode with this report name."</i>
    the report name was AQFKZFINANCE====GL_FRANCE=====.
    I created the t-code using this name. I had it transported to my QAS system an now we are getting a error stating that the the program is not found.
    When I check in SE38, I can see this program AQA0ZFINANCE====BP_RECON====== in both my development system and my QAS system.
    Should I have created in the t-code using the AQA0ZFINANCE====BP_RECON====== instead of the AQFKZFINANCE====GL_FRANCE===== program? 
    Is there any reason why the program AQFKZFINANCE====GL_FRANCE===== would not be in QAS?
    I do not have access to SQ01 in our QAS system so I cannot perfrom the process stated above.
    thanks in advance for the help.

    Hi,
    Please check this thread perhaps it may help.
    Re: How to create TCode for Sapquery
    Regards,
    Ferry Lianto

  • Steps for creating T.code for SAP Query

    Hi Friends,
    I have developed and SAP Query through SQ01, i want to assign an T.code for that.
    What are the steps we have to do in SE93.
    Regards
    Kumar M

    Hi
    Create a report pgm with the following code & create a T.Code for this pgm in se93.
    data: gv_test type sy-repid.
    DATA: GV_USERGROUP TYPE AQADEF-BGNAME VALUE 'FI',
          GV_QUERY TYPE AQADEF-QUNAME VALUE 'ZCON_FI_QUERY',
          GV_RNAME TYPE AQADEF-PGNAME .
    CALL FUNCTION 'RSAQ_REPORT_NAME'
      EXPORTING
        WORKSPACE        = ''
        USERGROUP        = GV_USERGROUP
        QUERY            = GV_QUERY
    IMPORTING
       REPORTNAME       = GV_RNAME
    * For the dynamic excution of the called query assisgn GV_RNAME to <gv_test>.
    gv_test = GV_RNAME.
    submit (gv_test) via selection-screen and return.

  • How to get Transaction code for SAP standard report painter in FI

    Hi All -
       Please let me know, How to get the transaction code for Standard SAP report painter / report writer in FI module.
    These report painters are created thru GR51...
    Thanks,
    Kannan

    Please refer to [Creating Transaction Code For Report Painter Reports|http://www.google.com/url?sa=t&source=web&ct=res&cd=1&ved=0CAgQFjAA&url=http%3A%2F%2Fdap-consulting.com%2Fyahoo_site_admin%2Fassets%2Fdocs%2FReport_Painter_Reports.47142031.pdf&ei=MiWYS5ilCYeOlAfn4pCGDQ&usg=AFQjCNEZ0YO6vJ97K24MbU_NI5ROTb5vJA&sig2=Ke-svnqddqrz8RMcTuEnaw].

  • Checking code for SAP USER EXIT

    we have enhanced SAP given data-source 2LIS_XX_XXXXX, there are hard coded user exits for this extractor. How to debug the code for enhancements?
    I know we enhance data-source in CMOD....SAPLRSAP001 (transactional data)....SAPLRSAP002(attributes)

    Hi Monica,
    There are many ways to debug the code if you wish to enhance the DataSource. In RSA3 you can do that by clicking Debug mode option. This is already been suggested by Srini.
    I would like to give you another way to do so.
    If you want to enhance the Transcational data then you need to choose EXIT_SAPLRSAP_001 component of RSAP001 enhancement. It has 4 component for master data( Text, hierarchy...etc).
    This is a function module enhancement. If you goto the source code of the function module, you will find an include program i.e. ZXRSAU01. double click on this program which will take you to the body of the program. This is the place where you need to write code.
    here you need to write the code as follows.
    case i_datasource.
    when '2LIS_XX_XXXXX'.
    Now here you can set a break point. This can be soft or hardcoded break point if you need to debug.
    Better Hardcode it. Write
    BREAK-POINT or BREAK username.
    Now when you execute the DS through RSA3, The program will stop here. The data extracted from DS will be available in an internal table C_T_DATA. Now you can enhance this by writing code. Again you can debug by pressing F5 or F6. This is as usual the way you debug an ABAP program.
    Hope this helps. If you need any further help contact at [email protected]
    Give reward point if you're satisfied.
    Happy debugging....
    cheers,
    Message was edited by: tapan tripathy

  • Source code for SAP's search components

    Hello all!
    Does anyone know where I could find the source code to SAP's provided TREX search components?  I would like to copy and modify one slightly, and would prefer to use their code instead of developing it from scratch if I can help it.
    Thanks in advance for the help!
    Best regards,
    Fallon

    Hi,
    Which one do you need?
    The class names you can find under
    System Administration -> System Configuration -> Knowledge Management -> Content Management -> User Interface -> Mapping -> (advanced) -> Search Dialog Box Component.
    Most of them are in km.appl.ui.search_api.jar
    Best regards,
    Avishai Zamir

  • Access code for SAP HANA dev center

    Hi ,
    Could you please let me know on how to get the Access code , which is a mandatory field to request for SAP HANA Dev .
    Regards,
    Nagaraj

    Hi Nagraj,
    From the [SAP HANA Developer Access page|http://www.sdn.sap.com/irj/sdn/sap-technology-innovation?rid=/webcontent/uuid/c022341c-5ed1-2e10-0b98-9b6a3314dd25],
    During the Beta version of this page HANA sandbox system access is by invitation and limited to test and trial and its all the sandboxes systems are currently fully booked

  • What is Exam Code for SAP SD certifications?

    Hi,
    I heard that some people saying it is like SAP SCM- Order Fullfilment .
    Please someone tell me which is the initial certification to be completed for this SAP SD.
    Is there any stages or only ONE single certification ?

    Hi,
    The first level is the Associate level, next is the Professional level.
    SD exam code -
    C_TSCM62_64 - SAP Certified Application Associate - Order Fulfillment with SAP ERP 6.0 EHP4
    C_TSCM62_65 - SAP Certified Application Associate - Order Fulfillment with SAP ERP 6.0 EHP5
    exam duration - 180 minutes
    80 Questions
    Check the following link, it gives the certification details, the weightage and schedule for examination.
    https://training.sap.com/gb/en/certification/c_tscm62_64-sap-certified-application-associate-order-fulfillment-with-sap-erp-60-ehp4-g/#certification-details
    Regards,
    Ronica

  • Communication b/n iviews --- Can we get the code for SAP's standard iviews?

    hi All,
    I have a requirement where I have to pass the user input data obtained in a standard iview(provided by sap) to a custom built iview and process it from there.
    If I have to use the EPCF's client data bag for this purpose, I must be able to edit the code which produces the standard iview(provided by sap) which I think is not possible, as we cannot get the code for the standard iviews provided by sap.
    Have anybody come across this kind of issue? If so, can you help me in solving this issue? Is there any workaround for this?
    Any input in this regard will be of great help to me and will be suitably rewarded.
    Thanks & best regds,
    Alagammai.

    hi George,
    Tnx a lot.
    But I have already tried importing par files into NWDS. I am not able to see any source code(like jsp or java)which can be edited. I am able to see only class files.
    Does that mean that the class files are to be decompiled, edited, compiled and then uploaded to the portal?
    best regds,
    alagammai.

  • How to Find Code for SAP Exit variables.....

    Gurus:
    The SAP Business Content Query "0FIAR_C03_Q0005" uses several BC variables of 'SAP Exit' type for determining "Date" values. I would like to see the code used in these variables. Can anyone please suggest how I can find it?
    For examople, the variable on Posting Date is "0P_KEYD2". What is the ABAP code for this? Please give me the Steps..!
    Thanks in Advance......PB

    Generally SAP doesn't give access to the code behind SAP exit variables, but you can find what the variable is doing using help documentation. Here is some info i saw on SAP help for your variable
    0CWD Current workday
    0DAT Current calendar day
    0P_KEYDT Key date of due date
    0P_KEYD2 Key date of posting (from key date of due date)
    0P_KEYD3 Key date of clearing (from key date of due date)
    0P_KEYD4 Key date of posting (posting date)
    0P_KEYD5 Key date of clearing (from key date of posting)

Maybe you are looking for