Certified bug: MAP 9.2 cannot detect Exchange 2003

I am having a very frustrating problem in using the MAP toolkit to inventory my network. It detects SQL 2005 with no problem, but no way, no how, will it report that I have an Exchange server, even though I have the option checked, the server selected,
and the proper credentials entered. It always comes up with "0" for Exchange servers. I have run the Microsoft Best Practices analyzer tool for Exchange, and it passes all the scans -- including permissions and connectivity -- with no problems reported.
Is MAP 9.2 even capable of detecting Exchange 2003? If so, what's the secret?

I finally made contact with the right Microsoft engineer about this problem. Early in our dialogue, he acknowledged replicating the problem:
"I have one of my engineers tested the question on Exchange 2003, and it is indeed an option that does not work any more (as there are others …)"
But eventually via the logs we discovered what the problem was: the "all computers credentials" account names have to be in fully qualified FQDN notation -- "domain\administrator," not just "administrator".

Similar Messages

Cannot provision Exchange 2003 account in OIM 11gR2

Hello,
I'm trying to provision Exchange 2003 accounts from OIM 11gR2 but I keep getting errors. My AD connector works and is able to reconcile and provision account and my Exchange connector is linked to it. I've understood that the only mandatory fields in the Exchange 2003 provisioning form are "mail store name" and "alias", so I've tested by only filling those. However, the provisioning does not complete and the logs show this error :
[2013-01-25T11:46:19.292-05:00] [oim_server1] [ERROR] [] [XELLERATE.ADAPTERS] [tid: [ACTIVE].ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: b70c24a5215a6ee3:-625a909b:13c6d3ae4c5:-8000-0000000000002b50,0] [APP: oim#11.1.2.0.0] Class/Method: tcAdpEvent/getITAttrVal encounter some problems: Could not find attibute value for IT Resource Key = 0 and attribute = Server Address
[2013-01-25T11:46:19.293-05:00] [oim_server1] [ERROR] [] [XELLERATE.ADAPTERS] [tid: [ACTIVE].ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: b70c24a5215a6ee3:-625a909b:13c6d3ae4c5:-8000-0000000000002b50,0] [APP: oim#11.1.2.0.0] Class/Method: tcAdpEvent/getITAttrVal encounter some problems: Could not find IT asset value for Svr_key = 0 and attribute = Server Address
[2013-01-25T11:46:19.293-05:00] [oim_server1] [ERROR] [] [XELLERATE.ADAPTERS] [tid: [ACTIVE].ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: b70c24a5215a6ee3:-625a909b:13c6d3ae4c5:-8000-0000000000002b50,0] [APP: oim#11.1.2.0.0] Class/Method: tcAdpEvent/getITAttrVal encounter some problems: DATA_ERROR[[
com.thortech.xl.dataobj.util.tcAdapterTaskException: DATA_ERROR
at com.thortech.xl.adapterfactory.events.tcAdpEvent.getITAttrVal(tcAdpEvent.java:2023)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpMEXCCREATEMAILBOX.implementation(adpMEXCCREATEMAILBOX.java:90)
at com.thortech.xl.client.events.tcBaseEvent.run(tcBaseEvent.java:196)
That's the only error I see and I'm not really sure about what it means. Any ideas?
Thanks,
--jtellier

Are you using the version 9 or 11 of the connector? I've done more investigations with version 9 and realized that the DB is not correctly updated by the connector. I've reported the problem with Oracle and a bug has been open. Here are the details :
When reconciling or provisioning a mailbox, a new row is added in the OIU table. This row has "null" as its APP_INSTANCE_KEY. Manually setting the Exchange's app instance key as the value of this column solves the problem.
Hope this helps!
--jtellier

Cannot Uninstall Exchange 2003 from former SBS2003 server

Hi,
I have this problem uninstalling Exchange 2003 from a prior SBS2003 installation.
Started with SBS2003 with Exchange2003 on server1
Then added server2, with Exchange2003 Standard
Then transitioned succesfully Server1 from SBS2003 to Server2003 Standard with Exchange2003 standard.
Now I have added 3 Exchange2010 servers and migrated completely to Exchange2010.
Uninstallation of Exchange2003 Standard from Server2 went succesfully.
I cannot find a way to uninstall the last Exchange2003 Standard from Server1
In Control Panel add remove programs there's no option to enter SBS setup anymore.
When starting setup.exe from SBS CD2 (i386 directory) I'm asked for a Product Key but I have no valid key to enter. Tried SBS key, Transition key, nothing works.
When downloading an Exchange2003 SP2 installation exe I only have the option to upgrade the existing installation. No option to uninstall.
What is the way forward? I'm stuck right now.
Regards,
Joost

Hello,
If you don't uninstall exchange 2003 in Control Panel add/remove programs, you may need to uninstall it by ADSIEDIT. Do not remove this Administrative Group unless you’re absolutely sure there’s
no object in Active Directory referencing this Administrative Group in the ExchangeLegacyDN attribute.
More information for your reference.
http://blog.dargel.at/2012/02/23/remove-legacy-exchange-server-using-adsi/ (Note: Microsoft is providing
this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure that you completely understand
the risk before retrieving any suggestions from the above link.)
http://technet.microsoft.com/en-us/library/bb288905.aspx
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Outlook 2013 won't start with Exchange 2003 on the network

Hello All,
I have outlined my problem below, If someone could please help me that would be great!
Environment
==========
SBS 2003 Server Running AD and Exchange 2003
Clients are Windows 7 with Office 2013 and Outlook 2007 (to connect to existing 2003 Server)
Issue
=====
I am in the process of Migrating off of SBS 2003 to Office 365. The situation is that my customer needs to keep the SBS 2003 server until end of life where they will at that time determine a upgrade path. They however do not want to use Exchange
anymore. I have migrated their mailboxes successfully to Office 365.
The problem that I am running into is with Outlook 2013. Because Exchange 2003 server still exists in the network I am unable to launch Outlook 2013. I get a Message
"The Resource that you are trying to use is located on an unsupported version of Microsoft Exchange Contact your e-mail administrator for assistance"
I have tried to create a new Outlook profile. However since the exchange server exists still it auto discovers the server for the account.
Questions
========
1. What is the best workaround for this situation? My customer still needs to keep their SBS sever for their domain and plans on retiring the server before Server 2003 End of Life this coming server. (Upgrade is not an option, nor is getting
rid of the Domain, they are a small company).
2. If I disabled the Exchange services on the server would this work? Would outlook 2013 not detect Exchange
2003 on the network?
Basically I need to force Outlook 2013 to look at Office 365.
3. Configuring Outlook 2013 to manually connect to Office 365? The problem here is that how do I locate the server name for the manually connection? I have found some blogs that say to use Remote Connectivity Analyzer https://testconnectivity.microsoft.com/
but I cant seem to get that to work.
Any ideas?
Thanks!

Hi,
Please refer to the following article to check your migration steps from Exchange 2003 to Office 365:
http://blogs.technet.com/b/canitpro/archive/2013/05/31/step-by-step-migration-of-exchange-2003-server-to-office-365.aspx
If all mailboxes are moved to Office 365, Outlook 2013 would use Autodiscover service to connect to your Office 365. Please make sure your Autodiscover service is configured correctly in Office 365. Also
verify that all the DNS records and Public Folder are updated and pointed towards Office 365 services. If there is any question about migration to Office 365,
we can ask a question in Exchange Online forum for more suggestion:
https://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Regards,
Winnie Liang
TechNet Community Support

Migrate windows 2003r2 AD to windows 2012r2 AD and exchange 2003 to exchange 2013 Steps

Hi
requesting advice,
how can i migrate windows 2003 ad + windows 2003 exchange to windows 2012r2 AD+ exchange 2013 DAG (planing to implement 2 mail box and 2 hub+cas hyper-v vm servers )
kindly guide me how can i migrate and what is the best practice method
requesting step by step procedures to follow
Regards
Ratheesh
Ratheesh

Hi Ratheesh,
Migrating AD from Windows Server 2003 domain to Windows Server 2012 R2 domain:
Introducing the first Windows Server 2012 Domain Controller (Part 1 of 2)
http://blogs.technet.com/b/askpfeplat/archive/2012/09/03/introducing-the-first-windows-server-2012-domain-controller.aspx
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012 R2
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Since we cannot migrate Exchange 2003 to 2013 directly, you can either migrate to Exchange 2007 or Exchange 2010 then to Exchange 2013.
Checklist: Upgrading from Exchange 2003 and Exchange 2007
http://technet.microsoft.com/en-us/library/ff805038(v=exchg.141).aspx
Checklist: Upgrading from Exchange 2003
http://technet.microsoft.com/en-us/library/ee332309(v=exchg.141).aspx
Part 1: Step-by-Step Exchange 2007 to 2013 Migration
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
Checklist: Upgrade from Exchange 2010
http://technet.microsoft.com/en-us/library/ee332309(v=exchg.150).aspx
I hope this helps.
Amy

I am getting weary of my iPhone 4s. the battery life is non-existent, second, i had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they wi-fi or cellular. what could be the problem.

I am getting weary of my iPhone 4s. The battery life is non-existent, secondly, I had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they Wi-Fi or cellular. what could be the problem?

Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

Why map sensors unable to detect sensor under Measurement category in SolidWorks (SWs)

In Labview Project Explorer, when I want to add 'map sensors' to the Solidworks model, it only detect the sensor under the 'Dimension' type shown on the FeatureManager Design Tree' on the left side.
While sensor under type 'Measurement' cannot be detect. Can anybody kindly explain why Labview cannot detect sensor under 'Measurement' type? Thanks in advance.

I've been trying to map sensors the Measurement sensor. But it could not detect Measurement sensor. It can only detect Dimension sensor.
I can't use the Dimension sensor because it requires measurement on a plarnar surface, while my model is curved. So I need to use Measurement sensor, point to point measurement to detect the length between the two components.
It mention in Labview 2014 softmotion help that both Dimension and Measurement sensor are applicable in NI Softmotion.
But why it only detect Dimension? Do I need to insert any extra command for labview to detect Measurement sensor?

Error 1074397153 "cannot detect recognizable video source" in LabVIEW environment and but not in NI MAX

Hi all,
We have first tested our cameralink camera using NI MAX and we were able to grab with out any error.
But when we are getting the Error 1074397153 "cannot detect recognizable video source" in LabVIEW environment when we wanted to acquire from a 16 bit Cameralink standard camera. we are using Labview 2013 SP1 and Vision development module with IMAQ 4.9 driver. Below is the VI pasted
All the camera cables, power cables to the camera are fine.
Kindly let us know what is the issue and any solution to solve it.
with regards,
Sri

-What camera you are using? Did you try with any other software provided with camera vendor?
-Did you check proper interface name?
-Please post MAX screenshot also will be better to understand the changes...
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

[SOLVED]Cannot detect battery or power supply before a power event

The system cannot detect my battery (or AC adapter) since boot, and before a power event
like the following: (the acpi command provides no output)
$ acpi
After I do one of the below
1. plug in AC adapter
2. remove AC adapter
3. cover my screen and uncover my screen
4. drain my battery to low power (probably 15% or 20%)
The system can detect my battery/AC
like the following:
$ acpi
Battery 0: Charging, 61%, 01:18:24 until charged
$ acpi
Battery 0: Discharging, 61%, 05:17:15 remaining
Is this a bug or solved issue?
or should I update my bios?
NOTE: This issue does not exist in Windows (8.1), on the same machine
The laptop is Dell Inspiron 14 7437, without touchscreen
Last edited by dvw10984 (2014-07-21 20:07:37)

I'm glad I could help!
To complete the answer on whether it's a bug or not, it has to do with your BIOS expecting Windows rather than Linux. So you need to tell it that Linux is running and without the parameter, the kernel will return false if asked whether Linux is running. This causes some features to just simply not work.
If adding that parameter makes the screen's backlight to not work, you may want to add "acpi_backlight=vendor" to it also, but it actually caused my computer to not boot and seemed to not make a difference (probably should have mentioned that).
Last edited by markzz (2014-07-22 04:17:18)

Cannot Move Mailbox from Exchange 2003 to Exchange 2007

Hello,
I am migrating exchange 2003 to Exchange 2007 and have moved almost all the mailboxes without any issue, but there are some mailboxes which are not being moved since they are giving me the below error.
Error:
Error was found for John Doe ([email protected]) because: Error occurred in the step: Opening source mailbox. Failed to open mailbox with error: ClassFactory cannot supply requested class, error code: -1056749262
Initially I found that the account was disabled from Active
Directory so enabled it but and also replicated the active Directory but still the problem is there, its not hidden in the GAL aswell.
http://www.arabitpro.com

Thanks everybody .. I have solved the problem myself.
To resolve this issue I had to give the account "SELF" permissions for "Associated external account". If the user does not have these
permissions to its own account it is unable to set the msExchMasterAccountSID attribute for the disabled account causing the error. By setting this permission on the disabled account, it allows it to mark the msExchMasterAccountSID attribute.
To do this follow this procedure:
1. In the Active Directory Users and Computers snap-in, on the View menu, click Advanced Features.
2. In the Exchange Advanced properties of the disabled user object that owns the mailbox, click Mailbox Rights, and then search the list of accounts for one
that has the Associated External Account permission.
4. If no account has this permission, grant the SELF account Associated External Account and Full Mailbox Access permissions.
https://support.microsoft.com/kb/278966?wa=wsignin1.0
http://www.arabitpro.com

TS1538 Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows.

Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
1. The phone charges it's battery
2. I can open it in My Computer and import/export media files.
In iTunes
3. It start to sync until step 3 then stops.
4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
I hope you can provide me a solution for this problem.
Thanks,
Ralph

Hi ralphagir,
Welcome to the Apple Support Communities!
For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
Safely disconnect iPod
http://support.apple.com/kb/HT1853
Have a great day,
Joe

I cannot detect my wireless hp desk jet 3520 printer, I cannot detect my wireless hp desk jet 3520 printer

I cannot detect my wireless HP desk jet 3520 printer from my iPad?

I can't find an Arris router with that model number, are you sure it is not a TG862?
Regardless, Arris routers are known to either be incompatible with Bonjour or have problems with Bonjour packets hence Airprint will not work. Check with Arris' website and see if there is a firmware update availble for your router for Bonjour/Airprint compatibility and install it or switch out your router.

When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased music not on this iphone" it tells me "All of your a

When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased > music > not on this iphone" it tells me "All of your available music has been downloaded to this device." However, my purchases are not yet downloaded to the iphone and not available to download. If I go to "purchased > music > all > recent purchases" it will show me the purchases that were most recent the last time I synced my phone, but not the purchases since then.
Any thoughts on how I can remedy this and make all of my purchased music available on my phone without requiring syncing?
iPhone 4

So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

My itunes cannot detect my ipod touch 5g. How do I fix this?

My itunes cannot detect my ipod touch 5g. How do I fix this?
All I know is that my itunes has not been updated. If this is the problem, I tried to close and reopen the program but the "update" popup isn't popping up anymore and I'm not sure where I can manually update it myself.
Please help!
Thanks

The 5G (iOS 6) require 10.5 or higher
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later7 (free download from www.apple.com/itunes/download)

Office Network cannot detect MBP

Hi,
My office is using Windows Server. I managed to connect to my server drives but the centralised printer and scanner cannot detect my MBP in the configuration setting. Without being detected on the centralised scanner, I cannot scan documents to my MBP.
Thanks.

Hi,
My office is using Windows Server. I managed to connect to my server drives but the centralised printer and scanner cannot detect my MBP in the configuration setting. Without being detected on the centralised scanner, I cannot scan documents to my MBP.
Thanks.

Certified bug: MAP 9.2 cannot detect Exchange 2003

Similar Messages

Maybe you are looking for