Certs did not working after failover

we had to failover our primary ace to secondary because primary ace crashed and we had to replace it. After we failied over certain certs stopped working
s
To fix this problem i had to remove the cert from ssl-proxy service and re-add it work. has anybody run into the problem like this? why would this fail after failover to secondary ace?

Oracle-User wrote:
Hi All
We are facing issues on FNDWRR.exe after we failover to DR apps servers. We are not able to retrieve concurrent job logs using web browser. Apache log file shows "Premature end of script headers" error message.
[Sat May 25 19:51:21 2013] [error] [client 10.64.224.134] [ecid: 1369507879:10.166.3.16:3282:0:13,0] Premature end of script headers: /d01/app/ebs/gap/apps_st/comn/webapps/oacore/html/bin/FNDWRR.exe
Any idea what can be causing this issue?
Thanks in advance!Did AutoConfig complete successfully?
Please relink FNDWRR.exe manually or via adadmin and check then.
Thanks,
Hussein

Similar Messages

  • HT201328 Unlocking my iPhone 4s did not work after I did the Restore in my device. Need Help

    I received an email confirmation from my carrier that my request to have my iPhone 4s to be unlocked has been sent to Apple and completed, and I followed the instruction given to me for Restoring my device but  still not able to use other SIM card. I was advice that I will be able to get the unlock info from Apple when I do the Restore, I'm still getting the error message "SIM card is invalid...." when I replaced the SIM card that came from my carrier with another. Please help. I need to know what am I missing. Appreciate any help.

    Yes, I believe the steps did Restore my device as new. I followed the steps given to me in How to Restore software in my device..still I believe the Unlocking did not work because I'm not able to use other SIM card

  • FNDWRR.exe not working after failover to DR apps servers

    Hi All
    We are facing issues on FNDWRR.exe after we failover to DR apps servers. We are not able to retrieve concurrent job logs using web browser. Apache log file shows "Premature end of script headers" error message.
    [Sat May 25 19:51:21 2013] [error] [client 10.64.224.134] [ecid: 1369507879:10.166.3.16:3282:0:13,0] Premature end of script headers: /d01/app/ebs/gap/apps_st/comn/webapps/oacore/html/bin/FNDWRR.exe
    Any idea what can be causing this issue?
    Thanks in advance!

    Oracle-User wrote:
    Hi All
    We are facing issues on FNDWRR.exe after we failover to DR apps servers. We are not able to retrieve concurrent job logs using web browser. Apache log file shows "Premature end of script headers" error message.
    [Sat May 25 19:51:21 2013] [error] [client 10.64.224.134] [ecid: 1369507879:10.166.3.16:3282:0:13,0] Premature end of script headers: /d01/app/ebs/gap/apps_st/comn/webapps/oacore/html/bin/FNDWRR.exe
    Any idea what can be causing this issue?
    Thanks in advance!Did AutoConfig complete successfully?
    Please relink FNDWRR.exe manually or via adadmin and check then.
    Thanks,
    Hussein

  • G3 Usb Modem Huawei E1550 did not work after unplug (NetworkManager)

    Hello, All!
    I have the following problem:
    When I boot with plugged in usb modem everything is fine.
    If I unplug modem and plug it back it can not be used any more.
    Some logs below.
    1. Modem plugged on boot
    lsusb
    Bus 001 Device 003: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem
    usb_modeswitch log:
    USB_ModeSwitch log from Sun Apr 08 23:38:27 CEST 2012
    Raw args from udev: /1-1.1:1.0
    Using global config file: /etc/usb_modeswitch.conf
    Using top device dir /sys/bus/usb/devices/1-1.1
    USB values from sysfs:
    manufacturer HUAWEI Technology
    product HUAWEI Mobile
    serial
    bNumConfigurations is 1 - don't check for active configuration
    SCSI attributes not needed, moving on
    checking config: /usr/share/usb_modeswitch/12d1:1446
    ! matched. Reading config data
    config: TargetVendor set to 12d1
    config: TargetProductList set to 1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506
    Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1
    Command to be run:
    usb_modeswitch -I -W -D -s 20 -u -1 -b 1 -g 9 -v 12d1 -p 1446 -f $configBuffer
    Verbose debug output of usb_modeswitch and libusb follows
    (Note that some USB errors are to be expected in the process)
    Reading long config from command line
    * usb_modeswitch: handle USB devices with multiple modes
    * Version 1.2.1 (C) Josua Dietze 2011
    * Based on libusb0 (0.1.12 and above)
    ! PLEASE REPORT NEW CONFIGURATIONS !
    DefaultVendor= 0x12d1
    DefaultProduct= 0x1446
    TargetVendor= 0x12d1
    TargetProduct= not set
    TargetClass= not set
    TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506"
    DetachStorageOnly=0
    HuaweiMode=0
    SierraMode=0
    SonyMode=0
    QisdaMode=0
    GCTMode=0
    KobilMode=0
    SequansMode=0
    MobileActionMode=0
    CiscoMode=0
    MessageEndpoint= not set
    MessageContent="55534243123456780000000000000011062000000100000000000000000000"
    NeedResponse=0
    ResponseEndpoint= not set
    InquireDevice disabled
    Success check enabled, max. wait time 20 seconds
    System integration mode enabled
    Use given bus/device number: 001/009 ...
    Looking for default devices ...
    bus/device number matched
    searching devices, found USB ID 12d1:1446
    found matching vendor ID
    found matching product ID
    adding device
    Found device in default mode, class or configuration (1)
    Skipping the check for the current configuration
    Using first interface: 0x00
    Using endpoints 0x01 (out) and 0x81 (in)
    USB description data (for identification)
    Manufacturer: HUAWEI Technology
    Product: HUAWEI Mobile
    Serial No.: not provided
    Looking for active driver ...
    OK, driver found; name unknown, limitation of libusb1
    OK, driver "unkown" detached
    Setting up communication with interface 0
    Using endpoint 0x01 for message sending ...
    Trying to send message 1 to endpoint 0x01 ...
    libusb:error [op_clear_halt] clear_halt failed error -1 errno 71
    OK, message successfully sent
    Resetting response endpoint 0x81
    Resetting message endpoint 0x01
    Could not reset endpoint (probably harmless): -34
    Device is gone, skipping any further commands
    Bus/dev search active, referring success check to wrapper. Bye.
    ok:busdev
    (end of usb_modeswitch output)
    Checking success of mode switch for max. 20 seconds ...
    Waiting for device file system (1 sec.) ...
    Waiting for device file system (2 sec.) ...
    Waiting for device file system (3 sec.) ...
    Waiting for device file system (13 sec.) ...
    Waiting for device file system (14 sec.) ...
    Waiting for device file system (15 sec.) ...
    Reading attributes ...
    All attributes matched
    Mode switching was successful, found 12d1:1001 (HUAWEI Technology: HUAWEI Mobile)
    Now checking for newly created ports ...
    new ports found, device is known to driver
    Checking for AVOID_RESET_QUIRK kernel attribute
    AVOID_RESET_QUIRK activated
    All done, exiting
    2.Modem unplugged and plugged back
    lsusb
    Bus 001 Device 008: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem
    usb_modeswitch log:
    USB_ModeSwitch log from Sun Apr 08 23:46:12 CEST 2012
    Raw args from udev: /1-1.1:1.0
    Using global config file: /etc/usb_modeswitch.conf
    Using top device dir /sys/bus/usb/devices/1-1.1
    USB values from sysfs:
    manufacturer HUAWEI Technology
    product HUAWEI Mobile
    serial
    bNumConfigurations is 1 - don't check for active configuration
    SCSI attributes not needed, moving on
    checking config: /usr/share/usb_modeswitch/12d1:1446
    ! matched. Reading config data
    config: TargetVendor set to 12d1
    config: TargetProductList set to 1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506
    Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1
    Command to be run:
    usb_modeswitch -I -W -D -s 20 -u -1 -b 1 -g 7 -v 12d1 -p 1446 -f $configBuffer
    Verbose debug output of usb_modeswitch and libusb follows
    (Note that some USB errors are to be expected in the process)
    Reading long config from command line
    * usb_modeswitch: handle USB devices with multiple modes
    * Version 1.2.1 (C) Josua Dietze 2011
    * Based on libusb0 (0.1.12 and above)
    ! PLEASE REPORT NEW CONFIGURATIONS !
    DefaultVendor= 0x12d1
    DefaultProduct= 0x1446
    TargetVendor= 0x12d1
    TargetProduct= not set
    TargetClass= not set
    TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506"
    DetachStorageOnly=0
    HuaweiMode=0
    SierraMode=0
    SonyMode=0
    QisdaMode=0
    GCTMode=0
    KobilMode=0
    SequansMode=0
    MobileActionMode=0
    CiscoMode=0
    MessageEndpoint= not set
    MessageContent="55534243123456780000000000000011062000000100000000000000000000"
    NeedResponse=0
    ResponseEndpoint= not set
    InquireDevice disabled
    Success check enabled, max. wait time 20 seconds
    System integration mode enabled
    Use given bus/device number: 001/007 ...
    Looking for default devices ...
    bus/device number matched
    searching devices, found USB ID 12d1:1446
    found matching vendor ID
    found matching product ID
    adding device
    Found device in default mode, class or configuration (1)
    Skipping the check for the current configuration
    Using first interface: 0x00
    Using endpoints 0x01 (out) and 0x81 (in)
    USB description data (for identification)
    Manufacturer: HUAWEI Technology
    Product: HUAWEI Mobile
    Serial No.: not provided
    Looking for active driver ...
    OK, driver found; name unknown, limitation of libusb1
    OK, driver "unkown" detached
    Setting up communication with interface 0
    Using endpoint 0x01 for message sending ...
    Trying to send message 1 to endpoint 0x01 ...
    libusb:error [op_clear_halt] clear_halt failed error -1 errno 71
    OK, message successfully sent
    Resetting response endpoint 0x81
    Resetting message endpoint 0x01
    Could not reset endpoint (probably harmless): -34
    Device is gone, skipping any further commands
    Bus/dev search active, referring success check to wrapper. Bye.
    ok:busdev
    (end of usb_modeswitch output)
    Checking success of mode switch for max. 20 seconds ...
    Waiting for device file system (1 sec.) ...
    Waiting for device file system (2 sec.) ...
    Waiting for device file system (3 sec.) ...
    Waiting for device file system (15 sec.) ...
    Reading attributes ...
    All attributes matched
    Mode switching was successful, found 12d1:1001 (HUAWEI Technology: HUAWEI Mobile)
    Now checking for newly created ports ...
    new ports found, device is known to driver
    Checking for AVOID_RESET_QUIRK kernel attribute
    AVOID_RESET_QUIRK activated
    All done, exiting
    dmesg output:
    [ 261.611314] usb 1-1.1: USB disconnect, device number 3
    [ 283.800711] usb 1-1.1: new high-speed USB device number 7 using ehci_hcd
    [ 283.899855] scsi11 : usb-storage 1-1.1:1.0
    [ 283.900156] scsi12 : usb-storage 1-1.1:1.1
    [ 284.638710] usb 1-1.1: USB disconnect, device number 7
    [ 300.687875] usb 1-1.1: new high-speed USB device number 8 using ehci_hcd
    [ 300.787664] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB0
    [ 300.788085] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB1
    [ 300.788450] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB2
    [ 300.789174] scsi16 : usb-storage 1-1.1:1.3
    [ 300.790242] scsi17 : usb-storage 1-1.1:1.4
    P.S. I am using NetworkManager 0.9.2.0
    Any Ideas?
    Thanks in advance

    Hello, All!
    I have the following problem:
    When I boot with plugged in usb modem everything is fine.
    If I unplug modem and plug it back it can not be used any more.
    Some logs below.
    1. Modem plugged on boot
    lsusb
    Bus 001 Device 003: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem
    usb_modeswitch log:
    USB_ModeSwitch log from Sun Apr 08 23:38:27 CEST 2012
    Raw args from udev: /1-1.1:1.0
    Using global config file: /etc/usb_modeswitch.conf
    Using top device dir /sys/bus/usb/devices/1-1.1
    USB values from sysfs:
    manufacturer HUAWEI Technology
    product HUAWEI Mobile
    serial
    bNumConfigurations is 1 - don't check for active configuration
    SCSI attributes not needed, moving on
    checking config: /usr/share/usb_modeswitch/12d1:1446
    ! matched. Reading config data
    config: TargetVendor set to 12d1
    config: TargetProductList set to 1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506
    Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1
    Command to be run:
    usb_modeswitch -I -W -D -s 20 -u -1 -b 1 -g 9 -v 12d1 -p 1446 -f $configBuffer
    Verbose debug output of usb_modeswitch and libusb follows
    (Note that some USB errors are to be expected in the process)
    Reading long config from command line
    * usb_modeswitch: handle USB devices with multiple modes
    * Version 1.2.1 (C) Josua Dietze 2011
    * Based on libusb0 (0.1.12 and above)
    ! PLEASE REPORT NEW CONFIGURATIONS !
    DefaultVendor= 0x12d1
    DefaultProduct= 0x1446
    TargetVendor= 0x12d1
    TargetProduct= not set
    TargetClass= not set
    TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506"
    DetachStorageOnly=0
    HuaweiMode=0
    SierraMode=0
    SonyMode=0
    QisdaMode=0
    GCTMode=0
    KobilMode=0
    SequansMode=0
    MobileActionMode=0
    CiscoMode=0
    MessageEndpoint= not set
    MessageContent="55534243123456780000000000000011062000000100000000000000000000"
    NeedResponse=0
    ResponseEndpoint= not set
    InquireDevice disabled
    Success check enabled, max. wait time 20 seconds
    System integration mode enabled
    Use given bus/device number: 001/009 ...
    Looking for default devices ...
    bus/device number matched
    searching devices, found USB ID 12d1:1446
    found matching vendor ID
    found matching product ID
    adding device
    Found device in default mode, class or configuration (1)
    Skipping the check for the current configuration
    Using first interface: 0x00
    Using endpoints 0x01 (out) and 0x81 (in)
    USB description data (for identification)
    Manufacturer: HUAWEI Technology
    Product: HUAWEI Mobile
    Serial No.: not provided
    Looking for active driver ...
    OK, driver found; name unknown, limitation of libusb1
    OK, driver "unkown" detached
    Setting up communication with interface 0
    Using endpoint 0x01 for message sending ...
    Trying to send message 1 to endpoint 0x01 ...
    libusb:error [op_clear_halt] clear_halt failed error -1 errno 71
    OK, message successfully sent
    Resetting response endpoint 0x81
    Resetting message endpoint 0x01
    Could not reset endpoint (probably harmless): -34
    Device is gone, skipping any further commands
    Bus/dev search active, referring success check to wrapper. Bye.
    ok:busdev
    (end of usb_modeswitch output)
    Checking success of mode switch for max. 20 seconds ...
    Waiting for device file system (1 sec.) ...
    Waiting for device file system (2 sec.) ...
    Waiting for device file system (3 sec.) ...
    Waiting for device file system (13 sec.) ...
    Waiting for device file system (14 sec.) ...
    Waiting for device file system (15 sec.) ...
    Reading attributes ...
    All attributes matched
    Mode switching was successful, found 12d1:1001 (HUAWEI Technology: HUAWEI Mobile)
    Now checking for newly created ports ...
    new ports found, device is known to driver
    Checking for AVOID_RESET_QUIRK kernel attribute
    AVOID_RESET_QUIRK activated
    All done, exiting
    2.Modem unplugged and plugged back
    lsusb
    Bus 001 Device 008: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem
    usb_modeswitch log:
    USB_ModeSwitch log from Sun Apr 08 23:46:12 CEST 2012
    Raw args from udev: /1-1.1:1.0
    Using global config file: /etc/usb_modeswitch.conf
    Using top device dir /sys/bus/usb/devices/1-1.1
    USB values from sysfs:
    manufacturer HUAWEI Technology
    product HUAWEI Mobile
    serial
    bNumConfigurations is 1 - don't check for active configuration
    SCSI attributes not needed, moving on
    checking config: /usr/share/usb_modeswitch/12d1:1446
    ! matched. Reading config data
    config: TargetVendor set to 12d1
    config: TargetProductList set to 1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506
    Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1
    Command to be run:
    usb_modeswitch -I -W -D -s 20 -u -1 -b 1 -g 7 -v 12d1 -p 1446 -f $configBuffer
    Verbose debug output of usb_modeswitch and libusb follows
    (Note that some USB errors are to be expected in the process)
    Reading long config from command line
    * usb_modeswitch: handle USB devices with multiple modes
    * Version 1.2.1 (C) Josua Dietze 2011
    * Based on libusb0 (0.1.12 and above)
    ! PLEASE REPORT NEW CONFIGURATIONS !
    DefaultVendor= 0x12d1
    DefaultProduct= 0x1446
    TargetVendor= 0x12d1
    TargetProduct= not set
    TargetClass= not set
    TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506"
    DetachStorageOnly=0
    HuaweiMode=0
    SierraMode=0
    SonyMode=0
    QisdaMode=0
    GCTMode=0
    KobilMode=0
    SequansMode=0
    MobileActionMode=0
    CiscoMode=0
    MessageEndpoint= not set
    MessageContent="55534243123456780000000000000011062000000100000000000000000000"
    NeedResponse=0
    ResponseEndpoint= not set
    InquireDevice disabled
    Success check enabled, max. wait time 20 seconds
    System integration mode enabled
    Use given bus/device number: 001/007 ...
    Looking for default devices ...
    bus/device number matched
    searching devices, found USB ID 12d1:1446
    found matching vendor ID
    found matching product ID
    adding device
    Found device in default mode, class or configuration (1)
    Skipping the check for the current configuration
    Using first interface: 0x00
    Using endpoints 0x01 (out) and 0x81 (in)
    USB description data (for identification)
    Manufacturer: HUAWEI Technology
    Product: HUAWEI Mobile
    Serial No.: not provided
    Looking for active driver ...
    OK, driver found; name unknown, limitation of libusb1
    OK, driver "unkown" detached
    Setting up communication with interface 0
    Using endpoint 0x01 for message sending ...
    Trying to send message 1 to endpoint 0x01 ...
    libusb:error [op_clear_halt] clear_halt failed error -1 errno 71
    OK, message successfully sent
    Resetting response endpoint 0x81
    Resetting message endpoint 0x01
    Could not reset endpoint (probably harmless): -34
    Device is gone, skipping any further commands
    Bus/dev search active, referring success check to wrapper. Bye.
    ok:busdev
    (end of usb_modeswitch output)
    Checking success of mode switch for max. 20 seconds ...
    Waiting for device file system (1 sec.) ...
    Waiting for device file system (2 sec.) ...
    Waiting for device file system (3 sec.) ...
    Waiting for device file system (15 sec.) ...
    Reading attributes ...
    All attributes matched
    Mode switching was successful, found 12d1:1001 (HUAWEI Technology: HUAWEI Mobile)
    Now checking for newly created ports ...
    new ports found, device is known to driver
    Checking for AVOID_RESET_QUIRK kernel attribute
    AVOID_RESET_QUIRK activated
    All done, exiting
    dmesg output:
    [ 261.611314] usb 1-1.1: USB disconnect, device number 3
    [ 283.800711] usb 1-1.1: new high-speed USB device number 7 using ehci_hcd
    [ 283.899855] scsi11 : usb-storage 1-1.1:1.0
    [ 283.900156] scsi12 : usb-storage 1-1.1:1.1
    [ 284.638710] usb 1-1.1: USB disconnect, device number 7
    [ 300.687875] usb 1-1.1: new high-speed USB device number 8 using ehci_hcd
    [ 300.787664] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB0
    [ 300.788085] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB1
    [ 300.788450] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB2
    [ 300.789174] scsi16 : usb-storage 1-1.1:1.3
    [ 300.790242] scsi17 : usb-storage 1-1.1:1.4
    P.S. I am using NetworkManager 0.9.2.0
    Any Ideas?
    Thanks in advance

  • Dirname and basename did not work after linux patch

    Friends,
    We have a shell script  works well before linux (Linux 2.6.32-400.33.2.el5uek x86_64)  patch  last month.
    Based on debug issue in
    export PLOC=`dirname $0`
    export PDIR=`basename $0`
    The testing message as
    export PLOC=`dirname $0`
    dirname: invalid option -- b
    Try `dirname --help' for more information.
    How to fix this issue?
    Thanks
    newdba

    The message "invalid option -- 'b'" results from $0 being "-bash". This can be the case if you are source executing the script. This would be a normal behavior.
    For instance:
    echo "basename \$0" > t1
    chmod u+x t1
    ./t1
    t1
    . t1
    basename: invalid option -- 'b'
    Try `basename --help' for more information.

  • I attempted to perform the itunes update on two different PCs and itunes will no longer open and I received a message to reinstall itunes. The reinstall did not work and I now receive a Runtime error message (R6034) re: library loading incorrectly. Help?

    I attempted to perform the itunes update on two different PCs. Itunes will no longer open and prompted me to reinstall itunes.  The reinstall did not work after several attempts and I received an error: "Runtime error R6034. An application has made an attempt to load the C Runtime library incorrectly. Please contact the application's support team for more information."  Has anyone else had this issue? How can I resolve it?

    I've been having the same exact problem this morning, and from the looks of it a lot of other people are posting about this issue, so I don't know if it's maybe something wrong with the download but I'm just relieved that it seems to be that instead of a corruption issue with my windows installation.  I'm just wondering how long this will take to be resolved.

  • Safari not working after reinstall

    Hi there,
    I had issues with my Safari (it woudn't start after the new upgrade), so I had to reinstall it (had to use AppDelete). The reinstallation worked fine, the program now starts (it used to get stuck at the beginning, with the icon bouncing on the dock and doing nothing), but now the browser doesen't seem to go on the internet anymore. All it does is waiting and timing out. Chrome,Opera and Firefox are working just fine. I am guessing the problem is the new installation, how can I fix this? I'm on the latest version of Lion, latest version of Safari downloaded from the official Apple site.
    Thanks in advance

    It is not very clear what you did, therefore difficult to recommend something. I understand you upgraded from SL to Lion, and Safari did not work AFTER that upgrade? Strange, does not seem plausible. Or what other upgrade did you do? Safari is a component of the system, and should NEVER be deleted via AppDelete or any other similar app.
    As I do not know what you exactly did, I would recommend to download the 10.7.2 combo update (a dmg, around 1 GB), reinstall it as a separate download. After restart, all should be again fine.
    How did you reinstall Safari after deleting it with AppDelete? You write ‘The reinstallation worked fine’, could you clarify what you did?

  • After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • HT5594 After updating to iOS7 on my iPhone4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

    After updating to iOS7 on my iPhone 4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

    I finally just resolved this after not being able to enable location services since upagrading to iOS 7. Posting the solution here 'cause I couldn't find it anywhere else.
    I enabled Restrictions under Settings > General > Restrictions and created a passcode (I'm not sure if this was part of the solution, but it wasn't enabled for me by default.)
    In Restrictions, under Privacy, Location Services was set to "Allow Changes" (This still didn't solve the issue of the greyed-out Location Services switch though - I still couldn't turn it on.)
    Also in Restrictions, I also switched "Find My Friends" to "Allow Changes"
    Once I did step 3, the switch under Settings > Privacy > Location Services was no longer greyed out and could be switched on.
    Hope this helps!

  • HT201412 Restore did not work.The ipad mini says it is disabled, connect to itunes.When connected, it says that it is locked! After Recovery/Restore completed, device still malfunctions. The slide image keeps dancing around the screen.Device types on its

    What if you have a situation where Restore did not work. I do. The ipad mini says it is disabled, connect to itunes. When connected, it says that it is locked! I have tried using Recovery/Restore but after it completed, the ipad mini still malfunctions. It does not allow you to start the device. The slide image keeps dancing around the screen. The opening page keeps changing in size and the keyboard types on its own! What can be done to fix this????????

    Maybe a reset would help, to be followed by trying the recovery again.
    To reset, hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.  Then do the recovery.
    If this doesn't solve it, I recommend visiting an Authorized Apple Service Center.

  • TS3367 Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Was it just this one time?  Could be that you, or your mom, were experiencing network problems.  Try again at a later time.

  • Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Has your problem been solved by the updates??
    Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
    MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
    Microsoft Office 2011:  version 14.2.3
    Mountain Lion: 10.8.2 (12C60)

  • Good evening, after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I  loaded Iphoto 9.4.3  with Time machine but I had lost quite a few photos. As a matter of fact, after searc

    Good evening,
    after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I  loaded Iphoto 9.4.3  with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures. Therefore, I would like to use 9.5 just by by clicking on the icon down my finder and  not by being obliged to open my hard drive.
    Would you please tell me what I should do. Thank you.
    Best regards,
    Robert

    Huh?
    As it did not work out,for fear of losing all my pictures I  loaded Iphoto 9.4.3  with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures.
    So, you have restored 9.4.3 from Time Machine but can see all your pictures in 9.5?
    Do you have two version of iPhoto on your Machine?
    And if you didn't update the Library, ("as it did not work out,") how can you see things in 9.5?
    So, whatever set up you have is confusing.

Maybe you are looking for

  • Podcasts show up/play in iTunes but do NOT sync to the iPod - help!

    Hi, I can download and play the strongbad emails podcasts in iTunes. But when I tell itunes to sync it to the iPod, it says 'update' complete, but then no data is actually transferred to the iPod. I read the instructions for how to sync podcasts, and

  • Where to find list of functions such as HR_READ_INFOTYPE

    Hi, I just started learning SAP HR Payroll and going thru some entries in thr forum for insight. The question I have is; Where to find list of functions such as HR_READ_INFOTYPE, HR_INFOTYPE_GETDETAIL  etc in SAP documentation? Thanks, Thaman

  • Multiple clusters definition with the same httpd.conf

    I want to define two different weblogic clusters for the same virtual host based on the URL. I've tried this <Location /tocluster1 > WebLogicCluster machine1:8090,machine2:8090 SetHandler weblogic-handler </Location > <Location /tocluster2 > WebLogic

  • How can delete annual values of Control Objects (FMAVCR01)?

    I have run OBR1 and OBR2 for deleting transaction data and master data. They are already deleted successfully. When I display the annual values of Control Objects with transaction FMAVCR01, It shows the commitment item values which are used in the FB

  • Impact on existing Incident management after implementing Charms

    Dear All, We are going to implement Charms( Change Request management) on a system where incident management is already configured. Before implement it, I need to find whether it will impact on existing incident management system. Actually, i am new