Certview Bug examing score reports

I was prompted to test Certview Score reporting this following reports of people with difficulties viewing core reports in certview. At around the time of this post i find the following either bugs or IMHO bad behaviours. I am using Chrome Version 23.0.1271.95 m from a Windows Vista PC at this time.
A am able to get to the Certview - exam history page entitled "Oracle University Exam History"
I see exams I have taken here under the oracle certification program under both prometric and Pearson Vue ( i don not see earlier exams taken under sun / MySQL before takeover; though I do see them on the certification page, this is all as I would expect).
So I have a table of exams as follows:
Test Start Date     Exam Number     Exam Title                      Grade Indicator     Score Report
17-MAR-10     1Z0-047             Oracle Database SQL Expert      PASS                     View
...[1]
When I click on the 'view' link for the score report on an old exam previously taken under oracle when prometric was the provider I get a pop up Tab page with the message:
"There are no registrations associated with your student information."
                      _OK_I can understand what is going on here, though the message is not informative.
[2]
When I click on view link for score report for the exam above (taken under pearson view) I get a background tab attempting to open with a 'Loading....' message on the tab title ... which goes 'untitled' for an instant and then disappears completely. That tab near reaches foreground and I remain on the exam history page.
[3] I haven't taken an exam for one taken after the new results regime introduced in november 2012 .... but other forum posters seem to have at least got some issues here. I seem to recall from blog links others were initially unsuccessful but later successful with recently taken exams.
I am concerned the update to this area may not have been fully tested, and may be pleased to recommend prize of extended visit to Australian Bushtucker trials with opportunity to develop and test escape software from tunnels full of bandicoots. Of course I am unfairly jesting ;-)
I personnally an not too bothered on this but others may be. I may raise an SR anyway and will leave the number here if I do. I understand it is the weekend, and that software updates take some time to develop and test.
.....

user10613194 wrote:
I have several certifications that I have completed from 2002, 2005 and most recently 2012. I am not able to view the results and get the same error mentioned above :
"There are no registrations associated with your student information."
OK
I don't think this is a browser related issue since I have tried this with Chrome, IE and Mozilla. Can anyone help with the solution to view my old results ?
Thank you,
ShashiFor the 2002 and 2005 examinations these will have been with a pre-pearson vue exam provider and the detailed exam results will not be available.
For the 2012 by best guess you ought to have had a Pearson Vue exam with results available, but their may be exceptions ( eg one thought is might happen if oracle testing ID's were merged). Suggest raise a specific service request with Oracle Certification to investigate. This is new so behaviours will be emerging ... however you have not hit a browser issue here as far as I can tell ).

Similar Messages

Score Report available in MCP site

The location where I do my tests sometimes can't print the score report and when print its completely unreadable.
Would be nice to have access to report in MCP site. to Save PDF´s and my my history.
We also need some improvements on MCP site, its slow and get random errors
http://blog.fujiy.net/ - MCPD em .NET 2.0 MCTS em .NET 4

If you sit an exam with PearsonVue, your score report will be available on the MCP site.
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCPD, MCSD, MCSA, MCITP, MCDBA
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

Score report not sent to pearson vue account

hello, i passed exam 1Z0-047 today afternoon, and at the center they didnt give me the printed score report, and told me to take it from my pearson vue account.....but when i am checking, the report is not showing in my acount.....in the current activity section it just shows "Ready to deliver" under a "recent appointment history" tab..... im really worried...will i get it?

839870 wrote:
hello, i passed exam 1Z0-047 today afternoon, and at the center they didnt give me the printed score report, and told me to take it from my pearson vue account.....but when i am checking, the report is not showing in my acount.....in the current activity section it just shows "Ready to deliver" under a "recent appointment history" tab..... im really worried...will i get it?The test center may have lost connectivity to pearson VUE. I could easily see a day or two delay before this gets updated .... and longer and go through http://www.pearsonvue.com/oracle/contact/ to raise an incident and ensure you get an incident number. Historically Pearson VUE usually tend to get these things sorted in a small number of days. In fact you may be better to raise it if it isn't fixed by late this evening.

Score report of Microsoft SQL Server 2012 Databases

Hello,
I had written exam of Administering Microsoft SQL Server 2012 Databases 70-462 and I am passed, but I didn't get score report of 70-462 paper.
can you please help us how to download Score report through online.
Regards,
Asfad

Your score report is available via the MCP Website (http://mcp.microsoft.com). This feature only works for exams taken with PearsonVUE though
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCSA, MCSE: BI
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

Bug in Normal report

Hi all,
BUG in normal report program, program of to take print of rejection invoice ,while taking the printout after creating the rejection invoice value getting differ(ex: correct value = 100 but ts take like 200/3022 like this). after sometime if i take same program same variant value comeing correct( ex correct value = 100) taking correct .its little bit diffcult to check in program . Please guide me the excatly what could be the promblem reason.
Regards,
Santosh

Hi,
what do you mean by "normal Report".
Is it a customer or SAP Report?
Regards, Dieter

Cp6 Quiz score reporting error in LMS

Looking for any inputs - this one's a bit strange:
I've been tasked with developing a course that allows the learner to test-out by jumping directly to the quiz. I've set up a series of advanced actions that allow one shot at the quiz without reviewing the course content, and actions that steer the learner back into the course after failing the quiz. All of these actions work, and the quiz score reports correctly each time within the course - the problem is what happens after that:
I leave the course and go to the learner profile on the LMS - instead of 100%, the score is reporting as 75% (4 question prototype). I've set preferences to complete the course and report the score - the course reports complete, the only error is the incorrectly reported score. When I leave the transcript page and go back to the course, the course opens to the last question in the quiz, rather than the last page visited - and the question is not completed. Is this a setting I'm missing on the Cp6 side, or do I need to interface with the IT guys running the LMS? I'm running Cp6 with the most current patches on a Meridian LMS.
Justenuf

In answer to Rod's suggestion to set the score to percentage:
Done - the client prefers that report anyway. Still seeing the stuff as described below.
In answer to Erik's questions above:
after the quiz, you have a quiz results screen that shows all the information you'd expect, right?
Right - the quiz results screen in the course shows the score achieved
If they passed, how do they close the lesson?
The "Continue" button on the results screen is set up to take them to a completion page. that page has an "exit" button that takes them out of the lesson and back to the LMS.
Does the LMS report the same result as the summary page?
Yes if the quiz is set up to "submit all" answers at once in Quiz:Settings. (However, this is not my client's preferred set-up - so I'm still searching for the answers below)
No if you have the quiz submit each answer individually - see below:
The scores reported on the results screens for the quizzes in the red box above were 100, 90, 80 and 80, respectively.
If they fail the lesson, how are they redirected back to the content?
The "Continue" button on the quiz results page is set up to jump to the first page of content if the score is below passing.
Then they go through the content?
Yes - its required at that point.
how do they retake the quiz?
the "next" button on the last content slide takes them directly to the quiz.
If they retake it, does the summary slide show the correct information?
In the "submit all" mode - this all works perfectly.
If set up to submit after each answer, if you fail the quiz and exit the course before retaking it, the score is reported correctly in the transcript - it seems as if it defaults to the minimum passing score in when you submit each answer individually.
again, how do they then proceed to close the lesson?
They exit the lesson using the "Exit" button, which closes it and takes them back to the LMS.
I'd suggest adding a 'continue' button to that summary slide (if there's not one already) and instruct the user to click, take them to a 'congratulations' page and instructions to now close the lesson.
Done - see above.
Do you have the lesson reporting 'after every slide' or 'send data at end'? If none of the above options help, try changing it from one to the other (in the 'template' options).
I've set it using the submit all checkbox in Quiz:Settings - not sure how to access template options - is this a menu I'm unable to find?
Thanks again for your time on this -
Justenuf

Viewing Score reports in pearsonvue

Hi All,
I have given oracle certification with Pearson vue. I forgot my user name, password and also security questions. However, I have my Oracle Testing ID. Please let me know whether I can get my scores with Oracle Testing ID. Thanks in advance.

ABI wrote:
Hi All,
I have given oracle certification with Pearson vue. I assume you have taken an exam with them
I forgot my user name, password and also security questions.Thats the sort of thing Rodney does.
However, I have my Oracle Testing ID.Thats useful, and do remember it.
Please let me know whether I can get my scores with Oracle Testing ID. Thanks in advance.No you cant get scores. However if you already have registered with certview (http://certview.oracle.com) you should be able to see your exam passes and certifications. (but not scores).
IMHO You really need to recover your pearson vue username etc anyway. I would suggest the following:
( I assume you have done following ):
Goto:
* http://www.pearsonvue.com/Oracle/
* Click MY ACCOUNT
* Click ( 'I forgot my username).
* Go through the retrieve username questions ......
...... This will problem stop you at the security questions.
.... If this is the case contact Pearson VUE directly for advice....
http://www.pearsonvue.com/oracle/contact/

Exam Result Report for Beta Exams?

I recently took a beta exam, passed it and received the cert. However, I don't receive any exam result. Is Oracle / Prometirc supposed to send the exam result to beta exam candidates?
When I took a production exam, I got the result (with breakdown on scores in each section) immediately after th exam. This was several years ago but I assume it is still the current practices. Then I can know in which area I am weak.

Hi!
I took several Beta exams and usually I got the exam report about 4 weeks after the beta period ended. I always got it before I got the certificate. Maybe you should ask what happened to your exam report, maybe it got lost on the way.
Best regards,
PP

A bug in ORACLE Report query??

I need to modify my report by adding a description. I can run my query from SQL statement without a problem. However, when i put it in the report, strange result is happening.
The result for 1 record used to be 1 page only and now went up to the number of record in the child table.
Parent query:
SELECT event_id FROM events;
One of the child query is as follows:
SELECT event_id, decode(m_event , 0, ' ', 'X') e_major_ind
FROM event_responders
I need to make a modification by adding following to the query:
(select decode (major_event, 0, ' ', ': '||meaning )
from domain where domain = 'EVENTRESPONDERS_MAJOR_EVENT' and value = major_event)
So currently I have the following:
SELECT event_id, decode(m_event , 0, ' ', 'X') e_major_ind,
(select decode (m_event, 0, ' ', ': '||meaning )
from domain where domain = 'MAJOR_EVENT' and value = m_event) e_major_desc
FROM event_responders
As soon as I added that subquery, I got an unlinked icon in the query box in the Data Model page.
Any idea? Is this a known bug? or Am I missing something?
Thank you soo much for your help.

SELECT ER.EVENT_ID,
       DECODE(ER.M_EVENT, 0, ' ', 'X') E_MAJOR_IND,
       DECODE(ER.M_EVENT, 0, ' ', ': ' || DOM.MEANING) E_MAJOR_DESC
FROM EVENT_RESPONDERS ER, DOMAIN DOM
WHERE DOM.DOMAIN = 'MAJOR_EVENT'
   AND DOM.VALUE = ER.M_EVENTIf you can't get it by joining to your reference code table, use a column formula to return the description.
Good luck.

Bug 2.1: Report folders are read only

Hello,
- unzip sqldeveloper-2.1.0.63.73.zip and start without migrating settings.
- add a new folder to user defined reports
- restart SQL Developer
-> The context menu of the new folder has only two options: Copy and Export
Maybe the problem is with the local language settings (XP German), because when I add
AddVMOption -Duser.language=en
AddVMOption -Duser.country=USto sqldeveloper.conf I don't have the problem.
Besides the minor issue that I have to change the language settings to german defaults in the preferences, there's no use in localization if it breaks the program ;-)
Regards
Marcus
P.S: It's the same bug as in 1.5.5: 1.5.5 Cannot add user defined report to folder
P.P.S: Another finding: I get the start tab with the online links and the tip of the day only when I set language=en.
Edited by: Marwim on 21.12.2009 08:31
Edited by: Marwim on 21.12.2009 08:37

Hi Marwim,
Thanks for this feedback.
I have replicated the issue and logged a bug.
Bug 9231534 - FORUM:USER DEFINED REPORT FOLDER MISSING ACTIONS IN NON ENGLISH LOCALES
Regards,
Dermot
SQL Developer Team

How do I log a bug in Crystal Reports 2008 ?

I cant find any links at all.
Can anyone help please?
Thanks
Richard

Hi,
Below are the answers to your queries:
Login to SAP and Business Objects portal
For getting the Login Id and Password fro SAP and BusinessObjects Portal you have to contact to our Customer Interaction Center (CIC)
Below are the contact number of CIC:
+49-6227-744969 (available worldwide)
Contact information for Business Objects # new support telephone number available 24 hours 7 days a week
We can not make our involvement because it involves lots of documentation and we are not well versed with that so CIC is the right place to deal with this and they will help you further for getting your credentials for SAP and CO portal.
Or
If you do not have SAP credentials then :
You will get the further details regarding the creation of new case or logging for a bug from CIC (customer Service), for this you need to create a new incidetn with the BusinessObjects SAP support.
CIC (Customer Interaction Center) Numbers
You can use Customer Interaction Center to submit support requests and service requests for problem messages and remote service postings.
Use the Customer Message Wizard to enter problem messages on SAP Service Marketplace. If you do not have online access, the relevant Support Center can create a message on your behalf.
Call the following number:
+49-6227-744969 (available worldwide)
Business Objects customers:
Contact information for Business Objects # new support telephone numbers, all numbers available 24 hours 7 days a week
More information:
- Business Objects Knowledgebase Central
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_ossnotes&query=&adv=true
It will ask you for a guest account and you can create it there itself.
- Software downloads (Crystal Designer fix packs)
http://resources.businessobjects.com/support/additional_downloads/
- Documentation on Crystal Designer XI and Developer
you can get the documentations on CR and BO on below link:
Http: //help.sap.com/
Click on tab BusinessObjects and then you can give the search criteria for the documents.
Useful links related to Crystal Reports Designer and Java API
https://boc.sdn.sap.com/developer/library
Hope this helps.
Regards,
Deepti Bajpai

Anyone else seeing the page-curl bug I just reported to Apple?

Here's the bug:
If you import AVCHD footage into iMovie (or even a screen recording made in QuickTime Player) in "Large" (not full size), the page-curl transition will corrupt when iMovie tries to play it back at the original footage's size or larger (i.e.,the effect will corrupt if you have the editing sub-window showing fairly large in the main editing window, or if you use full-screen playback, or you export the final project in a large size, such as 720p, to iTunes). This doesn't seem to affect footage shot with a Mac's iSight camera.
What will happen is, in, say, a 25-frame-long page curl (either right or left), roughly Frames 5, 6, and 7 will show plain dark gray, where they're supposed to be showing those frames of the first clip in the transition.
I've been able to reproduce this bug in iMovie 9.0.7 and 9.0.6, on both a late 2009 iMac i7 and late 2009 13" MacBook Pro. My AppleCare Senior iMovie technician was able to reproduce this on both a 2010 and 2011 21" iMac. (I wonder if this also appears in Final Cut Pro?)
I first noticed this when I upgraded my OS from Snow Leopard (OS X 10.6) directly to Mountain Lion (now running 10.8.1), as Mountain Lion "broke" every single page curl in every single project I'd made in iMovie (which had worked fine until then) over the last two years. I don't know if this bug was introduced in Lion, since I skipped that OS. Anyone out there know/care to run a test?
The AppleCare tech told me that the chance of this bug's getting fixed depends, in part, upon the volume of users like you who report it to Apple (at www.apple.com/feedback/imovie.html), and here on the boards.
So chime in (here, and at the feedback link above) if you have any observations to add. Thanks!

I saw something that appears to be possible curl corruption today in:
curl 7.21.4 (universal-apple-darwin11.0) libcurl/7.21.4 OpenSSL/0.9.8r zlib/1.2.5.
It stopped outputting the response content 9 characters before the end of the endline-less response and started spitting out a long string of characters that were based on the next thing it was trying to output which was the prompt:
Last login: Wed Sep 19 18:06:37 on ttys001
(my prompt that starts with mac-...)$ curl -v -H "Content-Type: application/json" -H "Accept: application/json" -X POST -d '{"name":"testing"}' http://localhost:3000/companies.json
* About to connect() to localhost port 3000 (#0)
* Trying ::1... Connection refused
* Trying 127.0.0.1... connected
* Connected to localhost (127.0.0.1) port 3000 (#0)
> POST /companies.json HTTP/1.1
> User-Agent: curl/7.21.4 (universal-apple-darwin11.0) libcurl/7.21.4 OpenSSL/0.9.8r zlib/1.2.5
> Host: localhost:3000
> Content-Type: application/json
> Accept: application/json
> Content-Length: 18
>
< HTTP/1.1 500 Internal Server Error
< Location: http://localhost:3000/companies
< Content-Type: application/json; charset=utf-8
< Cache-Control: no-cache
< X-Request-Id: d9dc4adfc8cbf612feedc3d52b17c0b4
< X-Runtime: 0.150121
< Content-Length: 89
< Server: WEBrick/1.3.1 (Ruby/1.9.3/2012-04-20)
< Date: Thu, 20 Sep 2012 12:23:45 GMT
< Connection: Keep-Alive
<
* Connection #0 to host localhost left intact
* Closing connection #0
{"errors":["No route matches {:action=>\"show\", :controller=>\"companies\", :id=>mammamacmacmac-mmac-mac-mmac-mac-mac-mmac-mac-macmac-macmacmac-macmacmacma cmac-mac-macmac-mamacmamamamamamacmacmamacmamammmmmmmmmmmmamamamamamacmammmmmmmm
followed immediately by my prompt which begins "mac-". It did this only once when I ran it as the first thing in that terminal session.
Feel free to post that in your support ticket or send me a link and I can post it. There is definitely a bug.

Bug in Crystal reports viewer: Internet Explorer

Hi,
I've a problem with crystal reports 13 sp2 viewer, that I'm using in .NET web application.
When I visualize a report using this viewer, the text doesn't take often the whole space that is reserved to it which causes an ugly overlapping between lines (an unnecessary text wrap) in the details section. That occurs when there's a multiple lines text. When I export it to PDF, the report is visualized in a right manner.
Is there a fix to this bug please?!
The enable grow property is enabled.
The application is aimed to run under Internet Explorer 9.
PS: Even in Internet Explorer 8, the problem persists. It doesn't happen in firefox.
Edited by: Rahma Sayari on Mar 1, 2012 4:48 PM

This illustrates the problem under IE:
[image 1|https://lh4.googleusercontent.com/-i1mqzapNIPQ/T0-lolvmr4I/AAAAAAAAAFQ/Sx3glRXPVM8/s463/EnableCanGrow_activ%25C3%25A9_forum.jpg]
This one is taken from the same report under Firefox:
[image 2|https://lh5.googleusercontent.com/-wphpbDfFWFM/T0-loyCOeRI/AAAAAAAAAFU/eXpTu41h2W8/s483/EnableCanGrow_activ%25C3%25A9_Firefox_forum.jpg]

Bug in PDF Report generation?

Hi everyone!
We have a problem! We need to print user data, including an initial password, on paper, one user per page. In the report section there is a choice of number of users per page.
However, if one(1) user per page is chosen, the PDF-generator produces a document with only one page, and just one user, where it should be about 40 (test environment).
Just running the report in the browser produces a corrects number of pages according to the number of users.
Is this a bug? Are there any workarounds?
Thanks,
Anders
Message was edited by:
AndNys

We solved but not so sure about the cause.
It had something to do with character encoding in PDF reports.
Thank you for all that read the question.

Margin Bug in CF8 Report Builder???

Build: 193563
When I set my left and right margins to .50 inches the generated report comes out with a .25 inch margin left and .75 inch right. After a couple of hours searching the web for a solution and playing with various combinations of margins, I changed my margins to .49 inch left and .51 inch right and the report is much closer to centered on the page.
Is this in fact a bug in Report Builder CF801? Is there something I'm missing or should I look somewhere else for answers?

This problem appears to be fixed in build 181436 of the
Report Builder

Certview Bug examing score reports

Similar Messages

Maybe you are looking for