Certview how to Send certification verification to a 3rd party

Hi all,
I'm finding the certview very confusing. I am trying to get to the send verification page but i cannot find it anywhere.
I've tried http://www.pearsonvue.com/oracle, Test Taker Services. Then there is no option available that takes me to the section i want.
Can someplease help tell me how to get to this section . I am applying for work and this would be very useful if i could find it.
Thanks,
G

On Certview Page ( Oracle/QuickLinks/Certification/Certview ) You have a tab "Publish ....". And it works . I have already tried.

Similar Messages

How to send job postings to multiple third party sites using the XML output

Dear Friends,
We are Implementing Irecruitment for our client, Client requirement is how can we send job postings to multiple third party sites using the XML output from i-Recruitment
With regards
Surya
.

Can you be more specific about your Requirement. In General, Please navigate to iRecruitment Recruiter Responisbility.
Then Select, Setup > Recruiting Sites. Here, you can configure your Third Party Websites information and attach stylesheets. The default mode oracle sends the vacancy information is HR-XML Format.
If you would like to select more sites information select "Add Another Row".
Then, you can see this information while "New Vacancy Creation Process".
iRecruiter.
Edited by: iRecruiter on Oct 18, 2009 7:43 AM

SAP BW data in ODS to XML and sending this XML file to 3rd Party

Hi Gurus,
We are having a scenario in which we have to convert our data in ODS to XML and need to provide this XML file to our clients so that they can use this XML file in their 3rd party system.
Now the issue is that i have created ABAP program for converting into XML.
If I execute this program, since i have given path as my Desktop, the converted XML file gets saved on my Desktop.
But the problem is how i can provide this XML file to the client.
Is there any way of converting this XML file to html and send them the URL ......
plz suggest me.... what can be done......
my ABAP code u can see in the following link
Extract SAP BW Data into XML
thanks and regards,
P.Madhusudhan Raju

Hi,
Pls go through the link below it may help you
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417100)ID1537206350DB01670597797729934632End?rid=/library/uuid/8c10aa90-0201-0010-98a0-f071394bc9ae&overridelayout=true
Regards,
Marasa.

How to trace Logs for WebService connectivity - 3rd Party to ECC

Hi Experts,
Basically it's a simple scenario, the 3rd party will send a soap request with the information in it and wiill be sent to ECC and be written on a table.
I'm wondering on how to trace logs on the soap request sent from 3rd party to an ECC environment. I used Altova XMLSpy and soapUI and to create a soap request from wsdl created in SOAMANAGER. Both of the software returns a response. Do these both of these software really sends data (soap request) going to the binded address or it's just i simulation that wsdl created is valid.
Cheers,
R-jay

Hello,
These third party tools send web service requests to SAP system. You can trace Service invocation and download the request and response payloads using SOAMANAGER. In Logs and Trace tab, edit the Trace configuration with suitable trace level and expiration time.
Thanks,
Venu

I want to send G.B. song to 3rd party for pro-mixing

I want to send my G.B. song to a 3rd party for pro-mixing.
They need all the single tracks, but in a manner which is in perfect order as the song flows.
Is there a way? In wav files

1. Solo each track? How?
click the headphone icon to solo a track
Will it end up in order?
there is no order, per se, you export each track one at a time
2. Export ? It only says export to CD or send to itunes or iweb.
use send to iTunes, and after each export, rename the song in iTunes to whatever you want (likely the track number to make things easy for yourself later)
3. without compression? Where is compression found?
sending to iTunes will send it uncompressed
B.T.W. I am using G.B. 3.0.4 (104) Is this good?
GB4 might be better, but GB3 is fine.

Anyone know how to upload the HTS files from 3rd party provider to GTS??

We are having following files provided by 3rd party provider - CUSTOMS Info
NAFTA ROO
U.S. HTS
Per provider, SAP has developed a system so that GTS users can automatically reclassify items that are effected by a change and they have asked us to program the HS data needed.
Anyone know how to do that?
Please advise,
Appreciated.

Hi Reddy,
Thanks for your input firstly, and i still need ur advise on the HTS upload.
1. Below is the HTS files provided by 3rd party company. and I noticed that there is 3 types of files. "DTR" , "Nom" and "Txt". Could you explain what are they? and If I need to upload them seperately?
2. Follow the procedure your provided - "classification > upload manually HTS codes into GTS system" Actually, I didn't find upload mannually HTS codes into GTS IN THE SAP CUSTOM Managment.
I tried "Load Traiff Code Numbers from XML files" and "Load Commodity code from XML file".
1) "Load Traiff Code Numbers from XML files"
2) "Load Commodity code from XML file".
   a) Select all files.
        - fill in "Data Provider",
        - "XML Files"-All files selected.
        - check " Output list", "simulation mode" "Nomenclature Active" and "Activate All Text Types"
        - no "Alternative Numbering Scheme" selected, and other selected.
        Error msg found:
        - Unable to find any defined structures for tariff assignment rule set "_DHSCN"
        - Incorrect order. Enter the first file(see long text)
    b)   only select "HSCN_Txt_I_00002001001.xml", the other is the same like bove.
          1. prompted to select a "From-Time Zone",   Select "UTC+8"
          2. Simulation was carried out successfully
    c) only select "HSCN_Nom_I_00002001002.xml", the other is the same like above.
          But I meet error for this file: "Incorrect order. Enter the first file(see long text)"
    d) only select "HSCN_DTR_I_00002001007.xml", the other is the same like above.
          meet error msg:
          "Unable to find any defined structures for tariff assignment rule set "_DHSCN""
HTS xml files of China from 3rd party provider
+++++++++++++++++++++++++++++++++++++++++++++++++++
2008-05-02 10:53         7,483,730 HSCN_DTR_I_00002001007.xml
2008-05-02 10:53         7,980,857 HSCN_DTR_I_00002002007.xml
2008-05-02 10:53         7,765,896 HSCN_DTR_I_00002003007.xml
2008-05-02 10:53         7,605,204 HSCN_DTR_I_00002004007.xml
2008-05-02 10:53         7,743,890 HSCN_DTR_I_00002005007.xml
2008-05-02 10:54         8,007,036 HSCN_DTR_I_00002006007.xml
2008-05-02 10:54         3,883,316 HSCN_DTR_I_00002007007.xml
2008-05-02 10:51         6,087,448 HSCN_Nom_I_00002001002.xml
2008-05-02 10:51         4,955,900 HSCN_Nom_I_00002002002.xml
2008-05-02 10:50           260,960 HSCN_Txt_I_00002001001.xml
+++++++++++++++++++++++++++++++++++++++++++++++++++

How to send data from BW to third party

Hi Gururs,
We got one of my requirement that we have to send 2 files (delta and full file) from BW to Third Party system. For the delta files we have to send an after-image and we are using FI datasource.Could anybody can tell how to design it?
1. is that advicable to use the FI datasource directly to infocube as the FI datasource is AIE extractor?
2.Can we the use BWA in APD. If yes how?
3.To send an files to third party which concept can we use APD or OHD. We advised to used OHD ,but the clients are not agreeing. They asking why we cant use APD? They saying APD will be more performance. Could u pls tell why and how?
Thanks in advance...

Hi,
It is not advaisable to load FI data to IC directly, must load to DSO first.
- If client asking to use APD, you cah go ahead.
SOURCE - DSO and capture deltas
Transformation
Target - Flat File
Use-
APD helps to identify hidden or complex relationships between data in a simple way. Various data transformations are provided for this purpose, such as statistical and mathematical calculations, and data cleansing or structuring processes
Regards,
rvc

How to send HTTP Post to URL (third party software) in JSP/JSPDynpage

Hello,
we want to integrate a third party application in our Portal Component (JSPDynpage using JSP and HTMLB). This third party component is called like this:
http://servername:port/cgi-bin/cgi.exe?request=map&format=html&swldy_ace=GDF&swldy_image_format=p n g&width=525&height=375
How can we do this in the JSP using HTMLB?
Thanks for your help.
Best regards,
Daniel

Hi Detlev,
thanks for your hint regarding the App. Integrator, but it seemn not to be what we want to do: We call a CGI and get a JEPG Image back as request.
Now we used the java.net.URLConnection to do the HTTP post in the JSPDynpage:
// send HTTP POST
try {
u = new URL("http://server/path/ourcgi.exe");
} catch(MalformedURLException ex) {
System.err.println("MalformedURLException");
// build query sting
String query = "request=plot&format=jpeg&template_name=......."
int cl = query.length();
try {
// open the connection and prepare it to POST
URLConnection uc = u.openConnection();
uc.setDoOutput(true);
uc.setDoInput(true);
uc.setAllowUserInteraction(false);
DataOutputStream dos = new DataOutputStream(uc.getOutputStream());
dos.writeBytes(query);
dos.close();
} catch ...
Best regards,
Daniel

How do I set class path for 3rd-party classes?

Hello, I need to know how to set the classpath so that I can use the apache's third-party lang classes. I downloaded commons.apache.org/lang/download_lang.cgi. And I need to know next steps. Move the unzipped files to which location? And type what commands?
Thanks, Melissa

Hi, it's not the server that I am running. My instructor told me to download an apache class file for the Apache Lang library and then set my class path to point to the executable. Her instructions are for Windows users, however. I need to do something in the terminal shell but I don't know precisely what.
mg

How to Bridge PACE 5031 NV to 3rd Party Router?

People say it's a lot like the 2Wire 3600, but the menus don't look the same to me. I Happily follow instructions with screenshots. My local tech geek is not able to handle this for some reason... Help?

Got my internet speed (cake) and gigabit LAN (eating it, too)! The trick I believe was 'Attack Detection' in advanced FW settings.
See here: http://forums.att.com/t5/Device-Setup/AT-amp-T-Modem-Router-Apple-Airport-Extreme/td-p/3607835#.Uw1oVfldUoA
There is no true bridge mode on the 2Wire routers. However, you can still configure it such that almost all functions of your own router will work properly.
1. Set your router's WAN interface to get an IP address via DHCP. This is required at first so that the 2Wire recognizes your router.
2. Plug your router's WAN interface to one of the 2Wire's LAN interfaces.
3. Restart your router, let it get an IP address via DHCP.
4. Log into the 2Wire router's interface. Go to Settings -> Firewall -> Applications, Pinholes, and DMZ
5. Select your router under section (1).
6. Click the DMZPlus button under section (2).
7. Click the Save button.
8. Restart your router, when it gets an address via DHCP again, it will be the public outside IP address. At this point, you can leave your router in DHCP mode (make sure the firewall on your router allows the DHCP renewal packets, which will occur every 10 minutes), or you can change your router's IP address assignment on the WAN interface to static, and use the same settings it received via DHCP.
9. On the 2Wire router, go to Settings -> Firewall -> Advanced Configuration
10. Uncheck the following: Stealth Mode, Block Ping, Strict UDP Session Control.
11. Check everything under Outbound Protocol Control except NetBIOS.
12. Uncheck NetBIOS under Inbound Protocol Control.
13. Uncheck all the Attack Detection checkboxes (7 of them).
14. Click Save.
Your router should now be able to route as if the 2Wire was a straight bridge, for the most part.
Inbound port 22 might be blocked, and inbound ports 8000-8015 might also be blocked, and there's nothing that can be done about it.
This is how I have my 2Wire configured, and I have a Cisco 2811 behind it doing IPSec, IPv6 tunnels, etc.

Sending a site to a 3rd party (client)

Hello:
I have built a site that includes many css classes and a variety of snippets. I have uploaded it to a server and then guided the staff from the organization I have built it for to download the site so that they can maintain it. However, when they do this the snippets and the various css styles do not appear in the appropriate panels. The snippets I can understand not being included, but the CSS styles must exist otherwise the site wouldn't render properly when the make changes.
Does anybody know how to upload these or otherwise forward these to the client. I could burn the site to a DVD and mail that to them. That would not be a problem. This must be something that developers do all the time, but it seems to be a quirk I haven't mastered yet.
Any advise would be greatly appreciated.
Steve Webster

I've used several methods. The best one, of course, is to upload to the site's server. That way, pages don't get nasty added lines of bogus code that make them fly into quirks mode. And if you're uploading javascript files, best to FTP...attaching to email gets javascript attachment files stripped off as dangerous.
The next best is to zip the whole file into a zipped folder and ship it over using something like YouSendIt.
That doesn't solve the problems of the client not knowing enough about the code to apply it correctly, of course, which a good basic text on the matter would help.
Ones I've used successfully are in the "Missing Manual' series, which are clear and present good resource material as well as good tutorials.
Beth

How to setup wireless time capsule with 3rd party external HDD and router?

Topic says it all really...
I've got a linksys router and an iomega external hard drive.
I want to have wireless time capsule setup but i don't really wanna shell out for an apple time capsule when I have a perfectly working router and hard drive...
Can it be done? would I be better off buying an airport express/extreme?
cheers

Welcome, jackbyo!
I've got a linksys router
Good product
iomega external hard drive.
1) The drive must be formatted in Mac OS Extended (Journaled) to work with Time Machine.
2) The drive will need to be connected directly to your Mac via USB or FireWire connection.
Can it be done?
As above
would I be better off buying an airport express/extreme
The AirPort Express will not support a hard drive.
Time Machine backups to a drive at the USB port of the AirPort Extreme are not supported by Apple due to corruption issues.

How do I get my iWork'09 3rd party Keynote themes into Keynote 6.0?

1. I had iWork '09 installed on my computer from the old installation disk. It was not clear at the keynote that I would receive the updates for free as I already owned them. I was expecting to see the updates when I opened up the App Store, but they were not there which gave the impression that I was SOL since I didn't purchase them through the App Store. I even received the message "[App name] is already installed, purchase anyway?", but that message is cryptic and not clear that I was going to receive the update, so I wound up purchasing the iWork apps again, just to wake up this morning to find out that I should have received them for free. I am truly hoping for a refund, because at $20 each, that's a big difference between that and free.
2. I opened up keynote to play with the new features, but because the internal architecture is different, it no long references my old themes folder in Library > Application Support > iWork > Keynote. I have tried copying the files to other permutations of possible reference folders in the global and user libraries, but have had no success. These 3rd party themes were not cheap either. I'm sure there is a way to get them to show up in the Keynote Theme Selector, but I haven't stumbled on it yet. Does anyone have any suggestions?

Thanks for the link to the troubleshooting tips! It contained the correct answer which is:
"If your documents or changes still don’t appear, try creating a new document on your iOS device, and then check again for existing documents from iCloud to appear".
I created a test document in Pages and when I returned to my documents all the documents from iCloud reappeared.

How to unlock iPhone 4s bought from 3rd party Carphone Warehouse UK

Hi everyone!
Hope you can help?
I purchased an iPhone 4s from Carphone Warehouse UK with an Orange contract. I am traveling to the USA shortly and I would like to use a local SIM card whilst out there as it will dramatically reduce my cost for data etc.
I contacted Orange to unlock my phone. They initially said that they could do it, but when they pulled my details up they said that because I purchased my iPhone through a 3rd party (Carphone Warehouse) and that the handset was not 'Orange branded' that they were unable to do it! I will need to contact Apple to unlock it.
I rang Apple and they said categorically that they do not unlock phones and it is the responsibility of the network to unlock the handset.
I rang Orange back with Apples response. They still said that they could not do it. I tried to reason with them, explaining that I wanted to get unlocked from THEIR network. But apparently its the phone that gets unlocked and not the network?
I decided to go back to my point of purchase. Carphone Warehouse said that they don't unlock phones and that it was a very 'grey' area. They said, that what ever SIM card is initially inserted into the handset, it automatically locks to that network? They didn't like to confirm who is responsible to unlock the phone (Orange or Apple) but they were leaning more toward Apple.
So my questions are:
Has anybody else had the same problem?
Has anybody else resolved this issue?
If this is not possible, can anybody offer any alternatives, other than roaming bundles etc, as they are still expensive?
Thank you all very much for reading this, I hope to hear from you soon,
Ceri

ONLY Orange can unlock your iphone. No one else at all. ONLY Orange.
Locking and unlocking is at the sole discretion of the carrier.
You will need to keep taking to Orange.

How to Collect IDOCS before sending to 3rd party

Hi All,
I am sending out PO's using ORDERS idoc from SAP to 3rd party.
In my scenario I need to group the similar IDOC data into a single file before sending it out to the 3rd party using XI. So in Partner profile I have choosen 'Collect IDOC' option and given the count as 10.
Once IDOCS were generated they were in Status '30'. So I then ran RSEOUT00 to flush the PO idocs to XI. It did flush them out but as individual IDOCS.
I had the impression that 'Collect IDOC' files the selected IDOCS into a SINGLE file/IDOC and then sends it out. Was I right in assuming that collect IDOCS merges all idocs into 1 file/idoc or is it wrong.
If it does not, is there a way how I can merge all these IDOCS into a single file before sending to 3rd party ?
Thanks
Shirin

Hi Shirin,
For IDoc packages see -
XI:Idoc Message Packages
The specified item was not found.
For IDoc Bundling see - The specified item was not found.
Also, to see BPM Collect patterns, you can navigate to the SWCV named SAP BASIS in your IR. Under namespace http://sap.com/xi/XI/System/Patterns you will find the integration process called BpmPatternCollectPayload. There are many examples in this namespace.
If you are new to BPM, see this - [Step by Step Guide to BPM|http://www.riyaz.net/blog/index.php/2008/04/16/a-step-by-step-guide-to-bpm-asynch-sync-bridge/].
Hope this helps.
Regards,
Riyaz

Certview how to Send certification verification to a 3rd party

Similar Messages

Maybe you are looking for