CF 9.01 Enterprise - multi-instance image problem

Have 9.01 enterprise running with 3 instances (sticky sessions) - the problem situation is as follows: eg. CFchart created on instance1, writes .swf to cache1. Print of chart writes .jpg to cache1, cfdocument shows that the image has expired - 1 to 3 refreshes of the page will ultimately show the image. Apears that the cfdocument is looking for the image in other instances. Removal of the cfdoucment tag and having the image go to a html page works. Appreciate any assistance that will get us past this.

Ah! I didn't realize the exact problem you were having until your followup.
CFDOCUMENT is using HTTP to fetch the resources to build the page. That HTTP request isn't being stuck to the same server, as it's not really part of the session.
There are a couple of ways you might fix this problem. One might be to use the local filesystem instead of HTTP using the LOCALURL attribute of CFDOCUMENT. Another might be to direct all requests that invoke CFDOCUMENT to a specific server within the cluster using that server's unique name, so that CFDOCUMENT also uses that unique name.
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/
Fig Leaf Software is a Veteran-Owned Small Business (VOSB) on
GSA Schedule, and provides the highest caliber vendor-authorized
instruction at our training centers, online, or onsite.
Read this before you post:
http://forums.adobe.com/thread/607238

Similar Messages

CF10 Enterprise, multi-instance w/different user accounts

Running CF10-Enterprise, 10,0,9,284568 with Update 9. This is running under JDK 1.7.0_21, and is fronted by Apache 2.2.x and all runs under RHEL6.x. It seems to work fine
In short - is it possible to create a new instance, and have that new instance run as a different user than the "main" instance? If so, what trouble does it cause?
In more detail...
The main reason we'd like to have a separate Instance is for "complete" isolation, to prevent one CF process or instance from affecting another, vs having one CF instance and just a lot of websites under it. Service isolation is a policy.
I spin up a new Instance (CF Admin -> Enterprise Manager -> Instance Manager), and start it. It runs as the user "cfusion", which is the same user that the main instance runs as. I'd prefer it to run as another user, namely the user that owns the site this instance is for. So if I have site www.site1.com owned by user site1, I'd like the CF java process to run as user site1 as well, and not the cfusion user.
In the past, this "complete" isolation was managed by deploying CF9 as a WAR file and running it under Tomcat. Each website had its own user in /etc/passwd, and that was the user the CF-under-Tomcat process ran as, the files were owned by that user, etc. But CF10 (currently at least) doesn't support being run as a WAR file under Tomcat.
The files in /opt/coldfusion10/ are owned by the user cfusion. An instance I created is in /opt/coldfusion10/testsite/. Could I chown -R testsite:testsite /opt/coldfusion10/testsite/ (user named same as instance name)? And the run /opt/coldfusion10/testsite/bin/coldfusion start, as the user testsite?
I'd lose the ability to easily manage this instance from the main CF Administrator site, such as Updates. Under CF9, the update process sucked and was manual and I had to do it for each site anyway (sigh.) But CF10 has a nice(r) update method, and I'd lose that. But if that's the only thing I lose, and I have to manually update each instance, I guess I can live with that (no different than what I'm doing now, still easier though under CF10.)
I suspect this is just simple lack-of-knowledge on my part (as are many things in my life.)
Thank you,
PH

Sorry, no. I haven't found a way to do this, if I want to manage it all from the primary CF instance. I can, of course, manipulate each instance independently. But that does rather defeat the purpose of having multiple instances via the Instance Manager.
I haven't looked in to it much more. I could probably hack together a combination of password-less sudo and editing of the coldfusion start/stop scripts. But I don't think that level of editing would be a good idea, not to mention if there ever is a CF update that might specifically rely on unaltered scripts.
PH

ColdFusion10 Multi-instance cfform problems

Hello,
I am working with a client on an issue regarding cfform ( flash ) on a coldfusion10 server with multiple instances. We have multiple instances setup as a cluster. We then replicate all sandbox security settings to both instances. However, one instance loads a test flash form, while the other produces an 'RSL Load Failed!' error.
Running the same test on a site that doesn't have a sandbox setup, the form works just fine on that instance. This leads me to believe there is a problem with permissions due to sandbox security on this instance. Anyone know what specific folders/settings should be enabled to allow cfform ( flash ) to operate properly?
Thanks in advance. If more info is required, let me know.

If I remember correctly, cfform is not one of the tags excluded in sandboxing. So, my guess is that this problem is caused by something other than the cfform per se.
I would think immediately of access to the CFIDE directory. For that is where ColdFusion's script and flash configuration files are stored. This brings me to the idea that the issue might be caused by one of the new changes in functionality in ColdFusion 10, namely, a logged-in user may have no more than one active session.

Problem with exclusive gateway in multi-instance subprocess

Hi,
I've recently developed a BPM process with 11gPS4 FP, the idea is simple:
1. The initiator select a set of "StakeHolders" from LDAP, each "StakeHolder" has an BOOLEAN attribute "isApprover"
2. There is a multi-instance subprocess, I used Parallel and Collection and I point the input & output array to the list selected in Initiator step
3. There is an exclusive gateway named "is approver or not" which have one unconditional sequence and one conditional sequence. In the conditional sequence I use the expression inputDataItem.isApprover == true which inputDataItem is a predefined object.
My intention is that when entering the subprocess, the stakeholders with "isApprover" is true should receive a task, but I found out that no matter "isApprover" is true or not, the expression will never become true. It always goes to the unconditional sequence. Then I tried to use some string attribute like inputDataItem.userID == "weblogic" and it works fine.
I've tried different expressions, like "inputDataItem.isApprover" or XPATH Expression but none of them work. I think it might be a bug that the gateway in a subprocess cannot use boolean type of attribute?
Has anyone met this problem before? Am I wrong somewhere or it's really a bug? Thank you in advance!

At first your configuration is not really correct.
=====================================================
In the LISTENER.ORA from 10g, you must only refer to the database and hsodbc 10g
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = INTEGRAT)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = INTEGRAT)
(SID_DESC =
(SID_NAME = MSSQLTEST)
(PROGRAM = D:\oracle\product\10.2.0\db_1\bin\hsodbc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1521))
===========================================================
Then you have to create a new listener (new name) in the gateway oracle_home on a different port than instance database:
D:\oracle\product\11.1.0\tg_1\network\admin\listener.ora
SID_LIST_LISTENERGTW =
(SID_LIST =
(SID_DESC=
(SID_NAME=DG4MSQL)
(ORACLE_HOME=D:\oracle\product\11.1.0\tg_1)
(PROGRAM=D:\oracle\product\11.1.0\tg_1\BIN\dg4msql)
LISTENERGTW=
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1522))
To start it, use the command below:
D:\oracle\product\11.1.0\tg_1\bin\LSNRCTL start listenergtw
===========================================================
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora:
match the DG4MSQL with the listener on 1522 port
HSODBC match with binary10g on listener 1521 port
MSSQLDG =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1522))
(CONNECT_DATA =(SERVICE_NAME = DG4MSQL))
(HS = OK)
MSSQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =(SERVICE_NAME = MSSQLTEST))
(HS = OK)
Try to configure and let me know your feedback
regards,
Mireille

Database Instance Installation Problem on Oracle 8.1.7

Dear gurus,
I'm having problem when installing Database Central Instance on Solaris 10 - Oracle 8.1.7 (32bit) - SAP 4.6c.
Here's the error log:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
Connected.
Echo                            ON
SVRMGR> SET TERMOUT ON;
Termout                         ON
SVRMGR> SHUTDOWN ABORT;
ORACLE instance shut down.
SVRMGR> STARTUP NOMOUNT PFILE=init.ora;
ORA-27123: unable to attach to shared memory segment
SVR4 Error: 22: Invalid argument
Additional information: 1
Additional information: 3
SVRMGR> CREATE DATABASE PRD
     2> CONTROLFILE REUSE
     3> MAXDATAFILES 254
     4> MAXLOGFILES   255
     5> MAXLOGHISTORY 1000
     6> MAXLOGMEMBERS 3
     7> MAXINSTANCES 50
     8> CHARACTER SET "WE8DEC"
     9> DATAFILE
    10> '/oracle/PRD/sapdata1/system_1/system.data1' SIZE 300M REUSE
    11> NOARCHIVELOG
Info: DBCREATEDB_IND_ORA SvrmgrDoDummy 2 349
    12> LOGFILE
    13> GROUP 11 (
    14> '/oracle/PRD/origlogA/log_g11m1.dbf',
    15> '/oracle/PRD/mirrlogA/log_g11m2.dbf'
    16> ) SIZE 20M REUSE
    17> ,GROUP 13 (
    18> '/oracle/PRD/origlogA/log_g13m1.dbf',
    19> '/oracle/PRD/mirrlogA/log_g13m2.dbf'
    20> ) SIZE 20M REUSE
    21> ,GROUP 12 (
    22> '/oracle/PRD/origlogB/log_g12m1.dbf',
    23> '/oracle/PRD/mirrlogB/log_g12m2.dbf'
    24> ) SIZE 20M REUSE
    25> ,GROUP 14 (
    26> '/oracle/PRD/origlogB/log_g14m1.dbf',
    27> '/oracle/PRD/mirrlogB/log_g14m2.dbf'
    28> ) SIZE 20M REUSE
    29> ;
CREATE DATABASE PRD
ORA-01034: ORACLE not available
SVRMGR> EXIT
Server Manager complete.
Error: DBCREATEDB_IND_ORA InternalInstallationDo 2 349
Create Database failed errorcode = 27123.
Error: DBCREATEDB_IND_ORA InstallationDo 2 349
Phase failed.
Error: Main {} 2 349
Installation aborted.
I have tweaked the shared memory max as suggested in Oracle Manual / SAP Installation Guide, to no avail.
The listener is up already.
When I logged in as user ORA<SID>, and go to svrmgrl > startup nomount pfile=init.ora, it can startup without hassle.
Although the Product is not supported in PAM, we have another machine running smoothly for years with this product combination, so it's not the product compatibility issues.
But when using R3SETUP -f DATABASE.R3S, the phase stopped with the log pasted above.
Any ideas, gurus?
Thanks for help.
Best Regards,

Mr. Markus, there's no file on saptrace/usertrace.
To be sure, here's what I've done:
1. Run oracle listener.
2. Check connection with svrmgrl > connect internal (connected).
3. Modify init.ora with my DB Name:
wef
# replace DEFAULT with your database name
*db_name=PRDDB*
db_files = 80                                                         # SMALL
# db_files = 400                                                      # MEDIUM
# db_files = 1500                                                     # LARGE
db_file_multiblock_read_count = 8                                     # SMALL
# db_file_multiblock_read_count = 16                                  # MEDIUM
# db_file_multiblock_read_count = 32                                  # LARGE
db_block_buffers = 100                                                 # SMALL
# db_block_buffers = 550                                              # MEDIUM
# db_block_buffers = 3200                                             # LARGE
shared_pool_size = 3500000                                            # SMALL
# shared_pool_size = 5000000                                          # MEDIUM
# shared_pool_size = 9000000                                          # LARGE
log_checkpoint_interval = 10000
processes = 50                                                        # SMALL
# processes = 100                                                     # MEDIUM
# processes = 200                                                     # LARGE
parallel_max_servers = 5                                              # SMALL
# parallel_max_servers = 4 x (number of CPUs)                         # MEDIUM
# parallel_max_servers = 4 x (number of CPUs)                         # LARGE
log_buffer = 32768                                                    # SMALL
# log_buffer = 32768                                                  # MEDIUM
# log_buffer = 163840                                                 # LARGE
# audit_trail = true            # if you want auditing
# timed_statistics = true       # if you want timed statistics
max_dump_file_size = 10240      # limit trace file size to 5 Meg each
# Uncommenting the line below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest = disk$rdbms:[oracle.archive]
# log_archive_format = "T%TS%S.ARC"
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
# rollback_segments = (name1, name2)
# If using public rollback segments, define how many
# rollback segments each instance will pick up, using the formula
#   # of rollback segments = transactions / transactions_per_rollback_segment
# In this example each instance will grab 40/5 = 8:
# transactions = 40
# transactions_per_rollback_segment = 5
# Global Naming -- enforce that a dblink has same name as the db it connects to
global_names = TRUE
# Edit and uncomment the following line to provide the suffix that will be
# appended to the db_name parameter (separated with a dot) and stored as the
# global database name when a database is created. If your site uses
# Internet Domain names for e-mail, then the part of your e-mail address after
# the '@' is a good candidate for this parameter value.
# db_domain = us.acme.com       # global database name is db_name.db_domain
# FOR DEVELOPMENT ONLY, ALWAYS TRY TO USE SYSTEM BACKING STORE
# vms_sga_use_gblpagfil = TRUE
# FOR BETA RELEASE ONLY. Enable debugging modes. Note that these can
# adversely affect performance. On some non-VMS ports the db_block_cache_*
# debugging modes have a severe effect on performance.
#_db_block_cache_protect = true                       # memory protect buffers
#event = "10210 trace name context forever, level 2" # data block checking
#event = "10211 trace name context forever, level 2" # index block checking
#event = "10235 trace name context forever, level 1" # memory heap checking
#event = "10049 trace name context forever, level 2" # memory protect cursors
# define parallel server (multi-instance) parameters
#ifile = ora_system:initps.ora
# define two control files by default
control_files = (ora_control1, ora_control2)
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = TRUE
# Uncomment the following line, if you want to use some of the new 8.1
# features. Please remember that using them may require some downgrade
# actions if you later decide to move back to 8.0.
#compatible = 8.1.0
3. set shared memory parameter as in sapnote 724713.
4. executing R3SETUP
and it tells me this error:
Info: DBCREATEROLLSEGSTART_IND_ORA SyGroupIDGet 2 354
Group id for group dba is 102.
Info: DBCREATEROLLSEGSTART_IND_ORA SyUserIDGet 2 354
User id for user oraprd is 100.
Info: DBCREATEROLLSEGSTART_IND_ORA SvrmgrDoDummy 2 354
Return from DB: 1034.
Info: DBCREATEROLLSEGSTART_IND_ORA SvrmgrDoDummy 2 354
Oracle Server Manager Release 3.1.7.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Server Manager complete.
Info: DBCREATEROLLSEGSTART_IND_ORA InternalInstallationDo 2 354
Startup Database.
Info: DBCREATEROLLSEGSTART_IND_ORA OracleCmd 2 354
Startup Database with PFILE: init.ora.
Info: DBCREATEROLLSEGSTART_IND_ORA SyCoprocessCreateAsUser 2 354
Creating coprocess /oracle/PRD/817_32/bin/svrmgrl [email protected] as user oraprd and group dba ...
Info: DBCREATEROLLSEGSTART_IND_ORA SyGroupIDGet 2 354
Group id for group dba is 102.
Info: DBCREATEROLLSEGSTART_IND_ORA SyUserIDGet 2 354
User id for user oraprd is 100.
Info: DBCREATEROLLSEGSTART_IND_ORA SvrmgrDoDummy 2 354
Return from DB: 27123.
Info: DBCREATEROLLSEGSTART_IND_ORA SvrmgrDoDummy 2 354
Oracle Server Manager Release 3.1.7.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
Connected.
ORA-27123: unable to attach to shared memory segment
SVR4 Error: 22: Invalid argument
Additional information: 1
Additional information: 2
alter database noarchivelog
ORA-01034: ORACLE not available
alter database open
ORA-01034: ORACLE not available
Server Manager complete.
Error: DBCREATEROLLSEGSTART_IND_ORA InternalInstallationDo 2 354
Startup Database with error: 27123.
Error: DBCREATEROLLSEGSTART_IND_ORA InstallationDo 2 354
Phase failed.
Error: Main {} 2 354
Installation aborted.
It's driving me nuts for the last days.. can't figure out what happened here.

How to display multi-channel image in the 'proxy'?

There're many examples to show how to display composite channels in the 'proxy'. But I don't find any example to show how to display multi-channel image in the 'proxy'. I found that I can use PSPixelOverlay to display alpha channel data like this:
int nSpotChannel = gChannelCount - 4;
PSPixelOverlay* overlay = new PSPixelOverlay[nSpotChannel];
for(int i = 0; i < nSpotChannel; i++){
       if( i != (nSpotChannel - 1) )
             overlay[i].next = overlay + i + 1;
       else
       overlay[i].next = NULL;
       overlay[i].data = gChannelData + (4 + i) * nPlaneBytes;
       overlay[i].rowBytes = gProxyRect.Width() * gDocDesc->depth / 8;
       overlay[i].colBytes = 1;
       overlay[i].r = 230;
       overlay[i].g = 161;
       overlay[i].b = 174;
       overlay[i].opacity = 255;
       overlay[i].overlayAlgorithm = kStandardAlphaOverlay;
pixels.pixelOverlays = overlay;
Then, Seeing red part, it will trigger a new problem, that is how to get the color value of the alpha channel by plung-in itself? It seems that no channel color value info is in FilterRecord.
If you have other solution, please tell me. Many thanks!

This is what I've been doing - was just curious if there was a way to see a more cohesive image.
If the individual EQ plugins are in fact the answer, is there any way to smooth how the Analyzer displays? The image I posted above, all of the tonal curves are very smooth. The analyzer tool shows a lot of peaks and valleys within the overall curve and it's hard to pinpoint each instrument's "sweet spot." Vocals for example are very hard to spot.
- Morgan

Strange short-term persistent image problem

Hello,
I'm well aware of the typical image persistence problem, where an image can stay "burned in" after the monitor displays the same thing for hours on end.
I have a much shorter-term persistent image problem. Let's say I open a web-page, leave it open for 10 seconds and then open a new window in Safari (thus getting a pure white page). Well when that happens, the previous web-page is still shadowed on the new white.
30 seconds later it has faded, but then the same thing will happen again with anything else that's displayed.
Any ideas?
thanks
Loa

Huh, now I'm really stumped. The cyan border is also present in FCE once I render, but it doesn't seem to happen for each instance when the paper image is used. Did you import the paper image as a .gif or something else? And did you add any filters to it? Did you also add any effects? The only I'm using with the paper image is the page peel and I have not tried any other effects to see if the cyan effect comes up.
I've put a screen capture of my FCE project showing the cyan border present in the canvas as my movie is playing. Its on my idisk as FCE movie problem.tiff
http://idisk.mac.com/gindacu-Public?view=web
Thanks again for the help.

Virtualised Multi-Instance SQL Server Cluster - Processor Resource Management

Hi - We're in the process of implementing a multi-instance SQL 2014 guest cluster on Windows 2012 R2. To our dismay, it seems that Windows System Resource Manager (WSRM) is deprecated in Windows 2012 R2, so we're now stuck for how best to manage CPU usage
between SQL instances....
As far as I can see, I'm left with two options, but both of these have problems:
1) Use SQL Processor affinity within the guest cluster, with each SQL instance assigned to dedicated v-CPU. However, I'm not certain that setting SQL Processor affinity within a VM will actually have the desired affect!?..
- When there is physical CPU capacity available, I'd hope Hyper-V would provide it to whichever v-CPU is demanding it.
- When VM processor demand exceeds the physical CPU capacity, I'd hope the SQL instances would receive a proportion of the physical CPU time according to the number of v-CPU(s) assigned through the affinity settings.
2) Use a VM (actually 2, because its a 2-node guest cluster) per SQL instance!.. This is not ideal, as we need multiple SQL instances and it would result in have an administrative and performance overhead
Does anyone have any information or thoughts on this? How can we manage a virtualised multi-instance SQL deployment now that WSRM has been deprecated? Help me please!

I'm not sure what are the requirements for each of the 2 VMs in in the SQL guest cluster.
I'm assuming the guest cluster resides on a Hyper-V CSV with at least 2 Hyper-V hosts, and the 2 VMs are configured with Anti-affinity to ensure they never reside on the same Hyper-V host.
I've been able to configure CPU resources to VMs from the standard controls in Hyper-V Manager:
See this blog post
What edition of SQL 2014 you're using?
This matters because of these limitations.
Also consider running SQL Server with Hyper-V Dynamic Memory - see Best Practices
and Considerations
Hyper-V performance tuning - CPU
Hyper-V 2012 Best Practices
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Cfschedule on multi instance server

Hi All
Hope someone can help me on this. We run a multi instance CF server with 3 "slave" instances, which handle the site requests and the CFusion instance that handles the scheduled tasks.
The application I'm writing has a few scheduled tasks that need setting up each time it gets installed and it is installed multiple times for a variety of clients. So far, this has been done either manually setting them up individually on the CFusiion instance or I created an admin menu extension that fires them off (Knowing the <cfschedule> is being run on CFusion, thus installing them to that instance).
My question however is; it would much more efficient if the application could check for the existence of the scheduled task and if it's not there, install them. The problem though is as the request would be coming from initial install, thus a web request, it would be coming from one of the "Slave" instances and install the scheduled tasks to them = bad. Is there any way to direct a specific request or point <cfschedule> to install on specific instance of ColdFusion?
Checking for the existance on the CFusion instance is easy, I can read:
C:/JRun4/servers/cfusion/cfusion-ear/cfusion-war/WEB-INF/cfusion/lib/neo-cron.xml
But then directing the request seems to be impossible in this way.
I am running CF9.0.1 on a Windows 2008 Server box with IIS7.5
Hopefully somone may be able to help
Thanks in advance
Tom

No one? Bueller? Bueller?
OK, so I may have come up with a solution, I'm just not sure how elegant it is:
I have a seperate install.cfm that handles the scheduled task creation. The file that gets included on application start now moves this install.cfm to the /cfide directory and then does a cfhttp call to it on 127.0.0.1 ... which is bound to the cfusion instance ... thus installing the schedule tasks to the correct instance and making my OCD happy. The file is then deleted once the cfhttp returns correct setup.
Does the job, but as I say, doesnt seem to be the most elegant of ways.
Tom

Multi-instance Install for CF 8

Hey all,
so we have installed CF 8 for multi instance. The main
instance will show up fine in the browser, but any additional
instances will not show up correctly. Either the instance shows a
blank white screen, or it gives a page not found.
We are setting up virtual sites in IIS to set the new file
locations.
Need help badly with this!!
thanks
Dan

First check that the ColdFusion instances are properly
running. If you
go to the instance manager of the main 'cfusion' instance,
where you
created all the sub-instances, you should be able to click on
the icon
that links to each instances ColdFusion Administrator. When
you do this
you are going to get pages using IP address and ports in the
URL bar of
your browser.
If that works. Can you access static HTML content in each of
your
virtual servers? Reading your last post, I suspect this might
the be
the source of your problem. When you run mutiple websites
from the same
server, each site must have separate addresses. This can be
done with
IP addresses, ports or host-headers. Making this work is
going to
involve configuration in IIS and|or your domains Domain Name
Server.
If you can get to the ColdFusion Administration Application
of all your
instances and you can get to static content in each of your
virtual web
sites, then there maybe other problems preventing the web
sites and
ColdFusion working together. But confirm those two things
first.

Upgrading OA 11i from OA 10.7 with Multi-Instances Schemas

From an ORACLE Applications 10.7 with Multi-Instances Schemas (Mutiple Set Of Books Architecture : Schemas : APPS, APPS2, APPS3, PO, PO2, PO3, AP, AP2, AP3, AR, AR2, AR3,...), we want to upgrade toward an 11.5.1.
At the begin of the Step of AutoUpgrade, we have an error :
"Not able to process an MSOBA, you must pass in the Multi-Org Architecture."
Could you give me some informations about the way to resolve this problem :
* Do we must install and initialize the multi-Org in the 10.7 environment ?
* Can we process this point during the step of upgrading and how ?
* Do we have a bypass to this problem ?
Think you for your help !

Below are the points which I read for r11i migration.
a) MSOBA clients should migrate/convert to multi-org before migrating to 11i.
b) Autograde will fail, if it detects MSOBA.
c) Attachments and Workflow will not work in MSOBA.
For more details refer Oracle appsnet.
null

Exception Handling inside a Multi-Instance Loop

I would like to see a sample process that demonstrates Exception Handling inside an inline subprocess containing another subprocess with a multi-instance sub-process in parallel. The outer sub-process is executing in sequence. Each instance of the outer loop depends upon the outcome of the successful execution of previous step. At each step, the inner inline sub-process activity can have more than one instance which are all executed in parallel using multi-instance. If the outcome code of any one of these parallel instances is "REJECT" code, we simply raise a business exception and the stop the outer sub-process from going through the next instance of the loop. The problem we are trying to solve is similar to the sample in chapter 5 of the book "New Book: Oracle BPM Suite 11g: Advanced BPMN Topics" by Mark Nelson. Particularly, the exception handling example shown in Page 73 under the topic “Exception Handling with embedded Sub-processes”. The inner most multi-instance sub-process should raise a business exception and interrupt the .
We would like to see a smple that demonstrates how exceptions are handled inside a multi-instance parallel sub-process. Could someone please provide a working sample that we can go though? We would like to raise a business exception as soon as certain outcome of a Human Tasks in observed and break out of the loop and continue thereafter. Thanks very much in advance for your help.
Pankaj
Edited by: 1001027 on 2-May-2013 10:09 AM

I would like to see a sample process that demonstrates Exception Handling inside an inline subprocess containing another subprocess with a multi-instance sub-process in parallel. The outer sub-process is executing in sequence. Each instance of the outer loop depends upon the outcome of the successful execution of previous step. At each step, the inner inline sub-process activity can have more than one instance which are all executed in parallel using multi-instance. If the outcome code of any one of these parallel instances is "REJECT" code, we simply raise a business exception and the stop the outer sub-process from going through the next instance of the loop. The problem we are trying to solve is similar to the sample in chapter 5 of the book "New Book: Oracle BPM Suite 11g: Advanced BPMN Topics" by Mark Nelson. Particularly, the exception handling example shown in Page 73 under the topic “Exception Handling with embedded Sub-processes”. The inner most multi-instance sub-process should raise a business exception and interrupt the .
We would like to see a smple that demonstrates how exceptions are handled inside a multi-instance parallel sub-process. Could someone please provide a working sample that we can go though? We would like to raise a business exception as soon as certain outcome of a Human Tasks in observed and break out of the loop and continue thereafter. Thanks very much in advance for your help.
Pankaj
Edited by: 1001027 on 2-May-2013 10:09 AM

Multi-Instance BGP

BGP Multi-instance was supposed to be released in XR 4.2, I could not find any mention of it in the Release notes for 4.2, 4.3, & 5.1?
How do I find out if it was implemented and if so how to configure it, if not if it is still on the road map?
Thanks,
John

Hello,
It is in release note XR .4.2:
http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.2/general/release/notes/reln_a9k_42.html
And some writing on Cisco doc:
http://www.cisco.com/en/US/docs/routers/crs/software/crs_r4.2/routing/configuration/guide/b_routing_cg42crs_chapter_01.html#concept_E6B1D3D6B8CA4742AED837B3A94E826F
Below is the example what i did in my lab running 4.2.3:
RP/0/RSP1/CPU0:ASR-9006-01#show run router bgp
Fri Jan 31 21:05:02.170 UTC
router bgp 1 instance IPV4
bgp router-id 72.15.48.5
bgp graceful-restart
ibgp policy out enforce-modifications
address-family ipv4 unicast
redistribute connected
allocate-label all
address-family vpnv4 unicast
retain route-target all
neighbor 172.16.8.3
remote-as 1
update-source Loopback0
address-family ipv4 labeled-unicast
route-policy PASS in
route-policy PASS out
router bgp 1 instance IPV6
bgp router-id 99.2.3.4
address-family ipv6 unicast
redistribute connected
thanks,
rivalino

Image problem in V4.0

Hi,
Previously I had lots of problems with showing a BLOB image from a table
in a report using the apex_util.get_blob_file_src function.
Varad put me right on several ocassions: see the thread at
Confusion with get_blob_file_src
Eventually everything went well, and I got my images of a specific size on the screen.
In the last month or two, the host database that I rent went up from version ten to version
eleven, and the apex version changed too from 3.2.1 to some version of 4.
I've only now discovered that the images don't display any more. I've re-read the thread
mentioned above but can see no deviation from Varad's sterling advice. It still doesn't work,
so my current guess is that something has changed when Apex went to its new version.
Can anyone point me in the right direction regarding Image problems in version 4 ?
I guess I'm not the first to experience such issues, and a checklist of things to try would
be most welcome.
I've done a View->Source on the page that doesn't work, and the issue with a missing value
for the "d=" parameter on the apex_util.get_blob_file seems to have recurred:
src="apex_util.get_blob_file?a=130&s=1718106956127950&p=13&d=&i=25615931827270369&p_pk1=5&p_pk2=&p_ck=947078FC54BB5126E7E0D19F8A24C416"
Suggestions welcomed please; thankyou in advance.
Mungo

Hi Folks,
I've found a solution to my "image" problem that caused this thread, hence the decent thing is to
post it here.
I read various other threads and stumbled across:
PDF viewing with apex_util.get_blob_file_src not working with 4.0
PDF viewing with apex_util.get_blob_file_src not working with 4.0 &# 4404695
That thread mentioned the requirement for an "Automated Row FETCH" process as well as having
an "Automated Row PROCESSING" process too.
I had the latter, but didn't have the former, so throwing caution to the wind I tried adding a dummy
Automated Row Fetch process and the damn thing worked!
Haven't got a clue why on earth either of these are requirements on a page that is selecting data
from the database - I don't understand where such processes are called in the big scheme of things.
That's just me baiting some kind soul to spell out the fundamentals for this idiot... please?
Happy to be corrected on any points.
Regards until the next crisis...
Mungo :-)
P.S. How come there is no reasonable way to get the URL of a single post in a thread - I'd like to give
reference to the single post that helped me, but all I seem to be able to get is the whole blooming thread.
Suggestions?
Edited by: MungoHenning on Sep 15, 2010 1:39 PM

How to setup a Multi-instance standby database?

I was asked to setup a multi-instance standby database for a multi-instance primary database. I understand that only one of the instance will apply redo logs from the primary database, but how about the other instance? Should I mount that instance just to update the standby control file(the control file is not located in shared file system with the cluster server) even if it isn't going to apply any redo logs?
I am so confused now. Hope somebody will help me on that. Any document or tutorial will be helpful too.
Note that I am not using dataguard.
Thanks in advance

Hi,
You can set up multiple instance standby..where in each instance will receive the archive logs from correpsonding primary instance. Keep them on shared location (say ASM) so that one of the instances from where recovery is started can access the archive logs and apply it.
So basically
Primary instance A <----- send archive to ---> Standby A
Primary instance B <----- send archive to ---> Standby B
Start managed recovery on A
Standby A --- > Apply archives for instance A and B
-Amit
http://askdba.org/weblog/
Edited by: Amit_DBA on Aug 12, 2009 5:16 PM

CF 9.01 Enterprise - multi-instance image problem

Similar Messages

Maybe you are looking for