CF / FLEX / FDS sample cfcrm Error#1069

on start of the sample crm application (compiled version and
server version), i get this flash-error :
in german:
ReferenceError: Error #1069: Eigenschaft employees für
samples.crm.Company nicht gefunden und es ist kein Standardwert
vorhanden.
or "translated":
ReferenceError: Error #1069: Property employees
forsamples.crm.Company not found, and no deafault value
any idea?
i think all my settings as decribed here
http://www.adobe.com/devnet/flex/articles/coldfusionflex_part2_02.html
are correct
thanks for your help
herbert

Re,
It works now, but i don't understand why it previously
failed..
I've just reinstalled fds and made all the change directly to
the server without any ftp upload .. and it works
Is it possible that xml updated files or ftp transfert were
the source error ?
Is the installation order (CFMX , FDS, Flex Builder + CF
extension) important ?
regards

Similar Messages

OpenWithDefaultApplication in flex sdk 3.5.0.12683 and ReferenceError: Error #1069:

I am trying to use openWithDefaultApplication to open the files in default application for the desktop application developed using AIR.
Development environment is as follows
- Flex builder 3.0 eclipse plugin .
- Flex SDK version is 3.5.0.12683.
- AIR 2.0 sdk, I have used instruction specified at http://www.adobe.com/support/documentation/en/air/2/releasenotes_developers.html#h, to overlay AIR2.0 sdk with Flex 3.5.0.12683. SDK.
I get the following error when openWithDefaultApplication is executed
ReferenceError: Error #1069: Property openWithDefaultApplication not found on flash.filesystem.File and there is no default value.
    at air_openwithdefaultapp/onFileSelect()[D:\www\flexprojects\air_openwithdefaultapp\src\air_ openwithdefaultapp.mxml:28]
I tried to trace/alert the flex and air runtime verions and I get following details, 3.5.0.12683 for Flex SDK and 2.5.0.16600 for AIR.
The same code works fine when I use the Flash Builder4 with Flex 3.5 sdk.
Any idea what is going wrong here?

Hi Swapnil,
1)Try Overlaying SDK to 2.0 like:
                 a)Download the AIR SDK 2.0 zip
                 b)and paste it at C:\Program Files\Adobe\Flex Builder 3\sdks\3.2.0 and
                 c)extract it.Check whether this SDK selected in Flex Compiler.
2) Make sure that you have changed the AIR version number in descripter file (-app.xml) for example <application xmlns="http://ns.adobe.com/air/application/1.5"> here have to change 1.5 to 2.0.
3) In the Flex Compiler panel check that which Flex SDK (3.5) has been selected. Might it different from defaultly selected.
In Flex Builder you can check in two ways :
          a)Window>Preferences>Flex>Installed SDKs(Default)>Check SDK selected.
          b)Select Project folder in Navigator Panel and Mouse Right click >properties>Flex Compiler>Check SDK selected.
4)Make sure that the opening files have accessibility with this function.
-Vamshi

ReferenceError: Error #1069: Property DSPriority not found on String and there is no default value.

Hi All
                  This is the Error where i got from my sample chatting application...
ReferenceError: Error #1069: Property DSPriority not found on String and there is no default value.
at mx.messaging::Producer/handlePriority()[E:\dev\4.x\frameworks\projects\rpc\src\mx\messagi ng\Producer.as:190]
at mx.messaging::Producer/internalSend()[E:\dev\4.x\frameworks\projects\rpc\src\mx\messaging \Producer.as:169]
at mx.messaging::AbstractProducer/send()[E:\dev\4.x\frameworks\projects\rpc\src\mx\messaging \AbstractProducer.as:561]
at SampleMessagin/sendMessage()[D:\FlexJavaPrograms\SampleMessagin\src\SampleMessagin.mxml:2 9]
at SampleMessagin/___SampleMessagin_Button2_click()[D:\FlexJavaPrograms\SampleMessagin\src\S ampleMessagin.mxml:74]
                    this is the code
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
      xmlns:s="library://ns.adobe.com/flex/spark"
      xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"
      currentState="{st}"
      creationComplete="consumer.subscribe()">
<fx:Script>
<![CDATA[
   import mx.messaging.events.MessageEvent;
   import mx.messaging.messages.AsyncMessage;
   import mx.messaging.messages.IMessage;
   import mx.modules.IModule;
   import mx.states.State;
   [Bindable]
   public var st:String="";
   public function changeStateHandler(event:Event):void
    st = "Login"
   //send message throug this method
   protected function sendMessage():void
    var msg:IMessage = new AsyncMessage();
    msg.headers = uname.text;
    msg.body = sendText.text;
    producer.send(msg);
    sendText.text = " ";
//message Handler
   protected function consumer_messageHandler(event:MessageEvent):void
    // TODO Auto-generated method stub
    var resp:IMessage = event as IMessage;
    dispText.text = resp.headers.toString()+" :: "+resp.body.toString()+"\n";
]]>
</fx:Script>
<fx:Declarations>
<s:Producer id="producer"
     destination="chat"/>
<s:Consumer id="consumer"
     destination="chat"
     message="consumer_messageHandler(event)"/>
</fx:Declarations>
<s:states>
<s:State name="State1"/>
<s:State name="Login"/>
</s:states>
<s:Panel x="246" y="137" width="366" height="200" title="Login Here" includeIn="State1">
<mx:HBox horizontalCenter="2" verticalCenter="-30">
   <s:Label text="Enter UR Name"/>
   <s:TextInput id="uname"/>
   <s:Button id="login" label="Login" click="changeStateHandler(event)"/>
</mx:HBox>
</s:Panel>
<s:Panel includeIn="Login" x="327" y="78" width="353" height="369" title="Welcome:{uname.text}">
<s:TextArea x="6" y="11" height="222" width="335" id="dispText"/>
<s:TextArea x="10" y="241" height="85" width="258" id="sendText"/>
<s:Button x="276" y="241" label="Send" height="76" click="sendMessage()"/>
</s:Panel>
</s:Application>
and my messaging-config.xml is as follows
             <?xml version="1.0" encoding="UTF-8"?>
<service id="message-service"
    class="flex.messaging.services.MessageService">
    <adapters>
        <adapter-definition id="actionscript" class="flex.messaging.services.messaging.adapters.ActionScriptAdapter" default="true" />
        
    </adapters>
    <default-channels>
        <channel ref="my-polling-amf"/>
    </default-channels>
    <destination id="chat"/>
</service>
                  can any one help me what is the error present here.............
                     why it is showing error .. am i wrote anything wrong in this code .. please help me....

I'm not the expert on this topic, but I think this line:
msg.headers = uname.text;
...is throwing the error. Look into how to properly construct the headers for the message. They should be in name/value pairs.

Error catcher: Error #1069: Property _bindingsByDestination not found

I appear to be having a rather strange issue. In my Flex project I have a mx:Canvas with a mx:Resize inside. The mx:Resize is redundant and not needed at all. Currently it looks like this:
<mx:Resize easingFunction="{Bounce.easeOut}" />
Nothing uses it at all, its completly redundant. If I remove that one line of MXML the flash player complains with this error:
Error catcher: Error #1069: Property _bindingsByDestination not found on ********* and there is no default value.
Any ideas?
Regards:
John

don't use the name property. that is a string:
targets=(obj.dropTarget.parent)
trace(targets);
trace(targets.x)

ReferenceError: Error #1069

Dear all,
I encounter this error:
ReferenceError: Error #1069: Property message not found on
mx.messaging.events.ChannelFaultEvent
Could anyone give me a hint on what actually cause this
error?
Thank you in advance

It would be best if you post simplified code and data that still exhibits the problem.
Boil the problem down to simplified code and you will likely find an answer comes quickly.
If you are accessing data with HTTPService, WebService, or RemoteObject, don't forget that Flex is asynchronous, so you can't send a data request and have other parts of the program that depend on the data already having been returned. That often means you need to call a function inside the result handler for the data service result event, after the data has been successfully processed.
If this post answered your question or helped, please mark it as such.

Any Help ? My Item Renderer fails with Reference Error: Error #1069:

So I have a basic inline dropdownbox itemrenderer as shown below, But after I click it and select a value I get an error "ReferenceError: Error #1069: Property TELEPH_USE_TYPE_DESC not found". I am guessing I am referencing something incorrectly. Any Ideas
Code
<mx:AdvancedDataGridColumn dataField="TELEPH_USE_TYPE_DESC" editorDataField="TELEPH_USE_TYPE_DESC">
    <mx:itemEditor>
        <fx:Component>            <s:MXAdvancedDataGridItemRenderer focusEnabled="true" height="22">
                <s:DropDownList                     id="dd"
                    top="5"
                    left="5"
                    labelField="TELEPH_USE_TYPE_DESC"                   selectedItem="{data.TELEPH_USE_TYPE_DESC}"                   dataProvider="{parentDocument.tpUseAc}" />            </s:MXAdvancedDataGridItemRenderer>         </fx:Component>
    </mx:itemEditor></mx:AdvancedDataGridColumn>

TELEPH_USE_TYPE_DESC is a field on the data object, but not a property on the item renderer which is defined within the mx:itemEditor tag.
You could add something like
<mx:Script>
<![CDATA[
    public function get newValue():Object
         return dd.selectedItem.TELEPH_USE_TYPE_DESC;
\]\]\>
</mx:Script>
And change the editorDataField to “newValue”

Problem with Loader, trying to load multiple png files, error 1069 on the contentLoaderInfo

Hi helpers !@
im trying to load multiple external png files from a folder. the path for the images comes from an xml attribute and i got no problem with the path. The error message pops on when i try to add the loader into an array for later use and then when im done remove each child i created. There is something in my pratice that is not ok , i meen i know im wrong with at some point ! Duh theres an Error message for each loader i create .. .
ReferenceError: Error #1069: Property Loader not found on flash.display.LoaderInfo and there is no default value.
here some code , pls guide me !
function affichageM(){
var nodeM:XML;
for each ( nodeM in listeM ){
   var reqM:String = localLogoM + nodeM.attribute("icon_max2");
   var imageLoaderJ = new Loader();
   imageLoaderJ.contentLoaderInfo.addEventListener(Event.INIT,addM);
   imageLoaderJ.load(new URLRequest(reqM));
     // just counting for fun
   iNodeM ++;
function addM(e:Event){
try { var l_img:Loader = Loader(e.currentTarget.Loader);
       l_img.name = "imageLoaderJ" + mc_ArrayImg.length().toString() ;
       l_img.visible = false;
       mc_ArrayImg.push(l_img);
       mc_Jour.addChild(l_img);
         //calling the fucntion that will animate all img in the array and had some text to them.....
      drawMyImg(mc_ArrayMImg.length()-1);
catch (error:Error) {
       //just counting errors for fun
      iErreurM++;
        var errorMessage:TextField = new TextField();
        errorMessage.autoSize = TextFieldAutoSize.LEFT;
        errorMessage.textColor = 0xFF0000;
        errorMessage.text = error.message + " " + mc_Jour.numChildren + " " + mc_ArrayImg.length;
        errorMessage.x = 10*iErreurM;
        addChild(errorMessage);
        return;

Hi, I'm not sure you are on the correct forum. This is the Flash Player forum. When you first open your thread, look to your right "More like This" and perhaps one of those forums would be helpful. Perhaps the Flash forum?
Thanks,
eidnolb

Error 1069 on Invoke Node

Hello all,
I'm trying to build an application we have. In one of the sub-vi's there's a call to invoke node to start another vi. When I run the program from the VI this works fine as it should. When I build my executable and have my .llb for the executable, the program gets to this point and I get the above error, Error 1069: The sub vi is not executable. I know there's no executable for this and the spawn vi that calls it is in the llb. Any ideas as to why it will work as a vi but not as an exe? Thanks for any help.
Gary

Aaron G wrote:
Gary,
A common reason for error 1069 is because you are attempting to launch the code from the executable environment and not a develoment environment. When it attempts to launch the VI, it may not find all of the subVIs, causing the VI to be reported as non-executable. One way around this is to open the VI that is dynamically launched, go to File>>Save With Options and choose Application Distribution. This will allow you to create an Application Distribution LLB file. If your executable launches the version of the VI that is in the Application Distribution LLB, it will work. As a word of caution, when saving files as an Application Distribution, the block diagrams are removed from the VIs, DO NOT OVERWRITE your existing VIs. You will never be able to edit them again if you do this. Alternatively, when you build the application, make sure that the VI is included as a dynamically launched VI in the list of included files.
Regards,
Aaron
Aaron, thanks for the reply. I am saving with options and doing the Application Distribution. I'm also getting error 1003 but it's still saying the possible cause may be that the vi is not executable. The vi's that the invoke fails on are not included in the llb but according to the previous version of the software (in LV 6.1) it's not needed. (I checked the old llb file and the options in application builder.) I have the spawn vi which calls the invoke in the llb. The spawn takes a path, creates a reference and then does the invoke on this path. The vi's themselves are not in the llb. Will these need to be moved in? And if so will the paths need to be changed?

An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation ...

Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph

Ran into this error, and the password was correct. What the System Event Log said:
Code SnippetEvent Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7041
Date: 10/8/2008
Time: 9:33:09 AM
User: N/A
Computer: ComputerName
Description:
The SQLSERVERAGENT service was unable to log on as DomainName\SQLAgent with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: SQLSERVERAGENT
Domain and account: DomainName\SQLAgent
This service account does not have the necessary user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
...sure enough it had been removed from the "Logon as a service" list. Hope this helps.

Error 1069 when I start my local WebAS

Hi,
to start my local WebAs I have to start the services SAPPDE_00 and SAPPDE_01. This was always working fine, but now I get the Error 1069! It says that my password is expired. My license is valid until January.
Can anybody help me, please?
Thank you
Julia

Hi,
Did you check notes like 13141, 544533 and 82751?
Eddy

Why am I getting midi conflict/sample rate errors. GarageBand 10 intel mac

Why am I getting midi conflict sample rate errors with no connected midi device?

Ok, I'll answer this myself. It has nothing much to do with midi devices being in conflict with anything. Nothing much to do with midi devices, as such, in fact. What it seems to be is a slow running system, whether it be processor, or hard disk, or whatever. In fact, when I found the cause of the problem, it was easy to solve.
What I saw a few times throughout this episode, was an inacurate sample rate report, which caused Garageband to run and react slowly, causing stuttering and flutter in audio output, so that noises were produced as the program struggled to handle the data streams it was reading and trying to reproduce and output cohesively. All of that was caused, it seems, by my iMac overworking and getting a bit too hot for comfort, having run all day, and multitasking for a good deal of it. I didn't adjust I/O buffering, or take any of the usual 'advised action' I've read from other users.
I simply saved my work and shut down the machine for an hour or two. When I restarted the machine, all had returned to normal. The lesson is, it seems to me, is minimise, or, stop other tasks the machine is carrying out. Safari, in particular, seems to be a major drain on resources, so work without it running. Shut down all unecessary programs and tasks, and run Garageband alone, when working in it. Garageband is a much tamer beast when it's left alone to do what you ask of it. It's quite a sensitive little soul. :-)

Refference Error #1069

I have a reference error on my flash project. Its a drag and drop project
with muscles. I'm trying to make the code so that my dynamic text will
change when the muscle is placed over its target and when it is off of its target. The dynamic text works when the object is off of its target but it does not work when the object is on the target. This is the error that comes up when I go to test the movie and place the object on its correct target:
ReferenceError: Error #1069: Property dropTarget not found on flash.display.Stage and there is no default value.
at MuscleManwithnewactionscript_fla::MainTimeline/
Please Help!
Thanks,
A student

you're using "dropTarget" in your actionscript and there's no such object when your code executes.
click file/publish settings/flash and tick "permit debugging" to see the line number with the offending code.

Error #1069 with new XMPData from Adobe CS5

Hi everyone,
I've got a video player working on adobe air, it playing well mp4 format or flv with a CS3 or CS4 export from After effects, but now with AE CS5 I've got the 1069 error :
Error #1069: Property onXMPData not found on com.VideoPlayer and there is no default value
I saw that the XMP data has some change with the new AE CS5, i think that the metadata of the new export files can't be read by adobe air ...
I tried to update to air 2.0.2.12610 but it's still the same error.
I tried also to don't add the xmpdata from AE but it's not fix the problem.
There is a way to have the same export of the metadata from AE CS4 & CS5 ?
Thank you for your help,
Nicolas

Ok, i found an alternative to the mp4 with AE CS5 and adobe air.
I use now the f4v export with CS5 and it works better than mp4 on CPU usage for the same quality !

StageVideo Adobe Air 3.0 iOS Error 1069 |onUpstreamBase not found

I am using a StageVideo object with Adobe Air 3.0 compiled down and running on an iOS device iPhone 3GS. The StageVideo appears and attaches to the NetStream just fine. But after I issue NetStream.play(), I get the following runtime error:
ReferenceError: Error #1069: Property |onUpstreamBase not found on views.DisplayView and there is no default value.
You'll notice that the "|onUpstreamBase" contains a "pipe"-character at the beginning. I tried to add:
public function onUpstreamBase (dataObject:Object):void {
trace(dataObject.toString());
to the view function, but that didn't work. And I can't create a function handler for |onUpsteamBase because of the pipe character.
I am attaching the Netstream and NetConnection to an recorded H.264 rtmp stream. The rest of my code works just fine, but is failing on this runtime error.
Anyone else run into this?
Thanks in advance.

I got this error too, but not trying to do anything fancy like Stage Video. The issue is w/the "client" property on the NetStream object. You're supposed to use this to add some event handlers/call back functions that the NetStream will invoke.
I got this error when I set the client property to "this" and defined the callback functions in my class. However, that generates this error. If you use a generic object to store the call back function, the error does not occur (b/c the generic object is dynamic)...
private function onNetStatusConnect():void
foo = { onMetaData: onMetaData };
stream=new NetStream(connection);
stream.client=foo;
// don't do this
stream.client=this;
vid=new Video();
addChild(vid);
vid.attachNetStream(stream);
stream.play(feedAddress);
public function onMetaData(data:Object):void
trace(data);

Flash Builder 4.0 and Flex 4.5 SDK Errors

I'm having issues using 4.5 in FB 4.0
Every time I create a new project and target 4.5 I get the following errors:
Description
Resource
Path
Location
Type
1084: Syntax error: expecting rightbrace before css
testing
Line 24
Flex Problem
1084: Syntax error: expecting rightbrace before end of program
testing
Line 447
Flex Problem
1084: Syntax error: expecting rightbrace before s
testing
Line 24
Flex Problem
1093: Syntax error.
testing
Line 24
Flex Problem
1093: Syntax error: A string literal must be terminated before the line break
testing
Line 24
Flex Problem
keep in mind the is a new project targeting the 4.5 SDK in Flash Builder 4.0. I have done nothing but create the project.
If I create the project with 4.1 SDK in Flash Builder 4.0, there are no issues.
Can someone confirm this is an issue with using 4.5 in FB 4.0 or share a solution to resolving the issues?
Thank you.

Can you create a simple project that demonstrates this?

CF / FLEX / FDS sample cfcrm Error#1069

Similar Messages

Maybe you are looking for