CF10 reverted to Developer and remains there

CF10 reverted to the Developer Edition seemingly overnight. I checked other posts about the license.properties file and making sure the serial number is in there. We have uninstalled / reinstalled as well as restarted the service and server. Need some help on new next steps.

Carl,
Here’s what I found in the coldfusion-out.log.
08/19 22:11:36 INFO License Service: Flex 1.5 CF Edition enabled
08/19 22:11:36 INFO Starting Flex 1.5 CF Edition
Aug 19, 2014 22:11:37 PM Information - Starting logging...
Aug 19, 2014 22:11:37 PM Information - Starting license...
Aug 19, 2014 22:11:38 PM Information - Developer Edition enabled
CF10 reverted to Developer and remains there
created by carl type3<https://forums.adobe.com/people/carl+type3> in ColdFusion - View the full discussion<https://forums.adobe.com/message/6656825#6656825>

Similar Messages

CF10 Standard reverted to Developer and remains there

hi there
I have a very strange behavior: Since years, we run CF10 Standard on Win2k3 for an old productive site. Some weeks ago, I faced some DOS-like problems on it and discovered that CF Admin shows the version as Developer Edition. This was absolutely surprising to me as we have a valid CF10 Standard Serial since 2012. Of course I entered it immediately again but to no avail. CF10 would remain in developer state.
Can this be caused by some CF10 Updates? We are at Update 13. Afaik, we do not need anything that is a CF10 Enterpreise feature. Can it be that some CF10Ent feature was turned on somehow that now prevents entering a Standard serial? And if so, what can I do to get bacl to a full working CF10 Standard? Any other ideas?
CF10 currently runs on Apache 2.2.27. Apache was updated several times over time.
This is critical because of the IP limitations. Lucky we that this system is used only seldomly. But still: DOS like problems appear.
Any ideas how to correct that?
not to say that this is quite urgent to me ...
Thanks
Tinu

Hi Tinu,
Go to \ColdFusion10\cfusion\lib and locate license.properties. Open this file in notepad or wordpad and then you will find the ColdFusion 10 Serial number there. If not, then please type in your license key, save the file and Restart the ColdFusion services.
This should work for you.
Regards,
Anit Kumar

When running itunes the cpu usage rises to 100% and remains there all the time, When running itunes the cpu usage rises to 100% and remains there all the time

My computer is a Dell with 4bg RAM. It works perfect, with internet and several programs runing cpu usage goes upt to 60% top. normaly runs at 155 top, but as soon as I start itunes it goes to 100% and remains there making almost imposible to use the computer, even loading files to the library takes several minutes and trying to conect my ipod is almost5 imposible. I sude this pc before with itunes and ipod with no problmes. I appreciate any help on this

I'm having the same issue for more than a month. When it's not open it's draing the cpu making the pc run slow and when open the cpu is maxxed at 100% that the I can barely use the computer and can't sync. And I only use it to back up and sync. Just downloaded the new version today thinking it would help but it didn't. Interesting to see if anyone has any answers.

Can a button change to another state and remain there, and also go to a URL?

Hi --
I've been wracking my brain and scouring the internet since yesterday to find a solution to this...It seems easy enough, but I'm at a loss...maybe I'm over thinking it and it's simply not possible?
We have a button that we want to, when clicked, change to another state, remain there, and also use a navto to go to another page within the publication...is this possible?
We've tried doubling up the actions of the button, using fake buttons, etc. all without success. What we have it at now is...you can tap to navto, and the button does change, but it reverts back to it's previous state in that moment between releasing the button and actually jumping to the page we want it to go to.
The only explanation I've come up with is based on the information on this page: http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-8ad81e812b10bfd837-80 00.html -- that because the two actions I want to accomplish fall into the two different categories: Supported actions for hyperlink buttons and Supported actions for slideshow buttons, that this simply isn't possible?
Your help is greatly appreciated!
Thanks,
Kristina

No, that's not supported with multiple actions. You can't switch a state and then jump to another document.

I wanat to get rid of the firefox ads that appear on my screen at start-up, and remain there. I want to get rid of ads, not have more show up from firefox!

I have been requesting help for this for the past HOUR. Firefox is placing ads on my screen at start-up (and they remain there) to get firefox on Android (I don't have a cell phone that uses it), and to go to the firefox site with information on how to use..........I have used firefox for years.........don't need this, and when I go there since it seems to be forced on me, read what is new, and try to close out...........it is back again when I open firefox again. If I keep getting ads from firefox, I will change to another browser!

Firefox 4+ versions use a new build-in home page named about:home with a Google search bar on it (no internet access needed to load that page). 
That about:home page only shows some snippets and has a button to restore the previous session if applicable.
If you want a home page without the Restore Previous Session button and the snippets then set another page as the home page like www.google.com used in Firefox 3 versions.
You may be seeing a similar ad on the Google site to install Google Chrome. 
In that case use the close X on that ad to close that pop-up and it should stay away unless local storage gets cleared.

HP Pavilion starts up in hibernate/sleep mode and remains there - there is nothing on the monitor

I have an HP Pavilion Elite HPE-250f (Core i7) desktop computer.
I was using the internet. Suddenly, the computer made some sound, and the screen went blank. The computer seemed to go into its usual hibernate/sleep mode. Usually, when the computer goes into hibernate/sleep mode (after some period of not being used), the color on the power button changes from blue to yellow. But, this time, the color remained blue.
Usually, I can move the mouse and get out of this mode. But, this time, I moved the mouse, and nothing happened.
I pressed and held the power button and turned off the computer. I then turned the computer back on. The power button was blue, there was a green light on the back of the computer, and the fans were working. But there was nothing on the screen.
I restarted several times, and there remains nothing on the screen. There is no beeping sound when the computer is restarted.
What do I do? Please help. Thank you.
This question was solved.
View Solution.

I removed the RAM memory cards and reinstalled them. That solved the problem.

As a JSF Developer, I want to understand technically how the JSF View Components are rendered as html and how there events are binded to Server.I want to know each Java Class that is involved in flow.

As a JSF Developer, I want to understand technically how the JSF View Components are rendered as html and how there events are binded to Server.I want to know how flows goes to the server and server understands the method which is to be called of managed bean. I know it is with annotation @ManagedBean and method name, but how Call is binded with annotation @ManagedBean.
In short, i want to know the internal implementation of JSF Framework.

As a JSF Developer, I want to understand technically how the JSF View Components are rendered as html and how there events are binded to Server.I want to know how flows goes to the server and server understands the method which is to be called of managed bean. I know it is with annotation @ManagedBean and method name, but how Call is binded with annotation @ManagedBean.
In short, i want to know the internal implementation of JSF Framework.

HT1430 I got my FIRST APPLE, iPhone 5S, about 80 days ago. on the 3-4 last charges, I found that restarts in last percents of charging process. On last charge time, restarted and remained off. It is grubby apple :-(( there's no troubleshooting for it?!

I got my FIRST APPLE, iPhone 5S, about 80 days ago. on the 3-4 times of last battery charges, I found that restarts in last percents of charging process. On the last charge time, restarted and remained off. It is grubby apple :-(( there's no troubleshooting for it?!
my iPhone 5s does not turn on at all , so I can't reset as it is recommended here in support... iTunes message that is in recovery mode... gives Error 40

Hold down the Power and Home buttons at the same time for about 10 seconds, or until the Apple logo appears. That forces it into a reboot. If that doesn't work, contact Apple for warranty replacement.

I just got the Itunes update. So frustrating. I will be trying methods on this forum to save my library and re-install the older version of ITunes. What was Apple thinking when they developed and released this mess?

I just got the Itunes update. So frustrating. I will be trying methods on this forum to save my library and re-install the older version of ITunes. What was Apple thinking when they developed and released this mess?

Apple is more likely to see your comments if you send feedback via:
http://www.apple.com/feedback/itunesapp.html
=Downgrading from iTunes 11 to iTunes 10.7=
You may be able to go back with Time Machine but this may involve restoring other items too (https://discussions.apple.com/message/20441404). Alternatively:
Back up your computer first, in case the unexpected happens.
Quit iTunes.
Get iTunes 10.7 from http://support.apple.com/kb/DL1576 or the direct download link at: http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
Do a few preparatory steps by making sure all iTunes components are not running and cleaning old files.   See https://discussions.apple.com/message/20475394. Do steps 3 and 4. Steps 6-8 may be also useful but I don't know if they are essential. Some of the other steps are not necessary, duplicate steps listed later in my post or are perhaps even unhelpful in the process.
Replace the iTunes 11 application with iTunes 10.7. Simply dragging the application to the trash may not work. Lion (OSX 10.7) and newer systems have iTunes integrated into the operating system and deleting is a bit more involved. Two ways to do this are:
1. Use the shareware Pacifist utility (http://www.charlessoft.com/) to install iTunes 10.7 including all associated system files. Details at http://forums.macrumors.com/showpost.php?p=16400819&postcount=6
2. Check this reference on how to delete the iTunes application itself:
    Delete iTunes in Mac OS X 10.7 Lion - http://osxdaily.com/2011/09/13/delete-itunes-in-mac-os-x-10-7-lion/
    After deleting the application there may be other files that need downgrading too. See the note about error -42408 at the end of this post. You may want to tuck these away somewhere safe until you have completed the installation of iTunes 10.7. I have not tested this but ideally if newer versions are not found then the installer will put in the old versions. This may include these files in /System/Library/PrivateFrameworks/ which apparently get updated by iTunes 11:
AirTrafficHost.framework
CoreFP.framework
DeviceLink.framework
iTunesAccess.framework
MobileDevice.framework
After doing one of the two procedures above you will have to rescue the most recent old iTunes library from your iTunes > Previous Libraries folder. Rename it "iTunes Library.itl" and replace the existing one in the iTunes folder. A newer version of iTunes irreversibly updates your library file so you have to replace it with the old one or you will get an error message. Note, this will revert your library to the version at the time of the upgrade and you will have to update any changes made since. See:
https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library from previous iTunes library file after upgrade/crash.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
Other issues:
- https://discussions.apple.com/message/20432309 - solution to mobile devices saying they need to be restored after downgrading
- If you encounter error -42408:
iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - including specific error codes.
Alternatively, check https://discussions.apple.com/message/20441424 which requires you have a Time Machine backup (though possibly if you remove the newer version of these files old ones may be installed with the iTunes 10.7 installer - untested). A variant of this is at: https://discussions.apple.com/message/20448184
- Persistent "Show in iTunes Store" arrows after downgrade - https://discussions.apple.com/thread/4567064

New Development and CA

We are in process of developing new eCommerce application on ATG. We also have a business requirement to manage images and products using BCC. Most of the business requirements in phase 1 of the project is to configure and deploy application code along with CA ( BCC / Merchandising). My question is whether it is advisable to do new application development along with CA configuration at the same time. What does ATG best practice say in this regard. My opinion is that we should do new application development (deliver new functionality) first to be followed by CA initiative. I have never directly worked on CA projects but I have been part of large teams with multiple initiatives where CA being one of the initiative and I have seen there are quite a few steps that one need to follow in configuring and deploying CA / BCC e.g. versioning of modules, modifying DB schema to support versioning etc. I don't want to run into issues where our main focus is to deliver new functionality and want to avoid the complexity of doing both new development and CA at the same time.
Edited by: 899085 on Nov 24, 2011 12:01 PM

The best practice recommendation would be to include any BCC/CA implementation as early as possible in your project plan. Understanding the process of how the business users will be using the tools and what impact any customizations to the ATG code your applications make are very important in a successful rollout of a site usign the BCC and Merchandizing. We tend to see that the projects which attempt to implement BCC/CA at the last minute are the ones that encounter the most problems. Projects which include the BCC and CA in the early stages of the applciation design, project planning, and UAT and load testing go through a much smoother test cycle and launch.

Development and Runtime Environments

Hi,
The new online oracle Linux store does not seem to be "runtime" www.oracle.com/store
and a few other internet available APEX apps do not use the runtime version to serve their Apps.
I've browsed through the forum and it seems that the consensus is to use Runtime for Production and Development for Test/Devl. Are there any out there that take the risk of running the full Development environment in Production? Maybe there are other security measures that can be taken?
- How do you deploy an application to the Runtime environment? I'm guessing there is a PL/SQL API that you pass your f10X.sql to?
Has anyone tried to secure APEX at the Web Server level? Somehow configure your external modplsql link to disable the admin functions via some Apache or some DAD settings? Then allow an internal web server to serve a normal full Development modplsql DAD?
I kind of just rambled and realize there are many solutions the issue... but any feedback is very much appreciated!
Thanks,
AJ

Lateralus wrote:
- How do you deploy an application to the Runtime environment?a) Run the export script in SQL*Plus.
or
b) Use Oracle SQL Developer to login to the workspace schema. There is an "Application Express" node you can right-click and choose Import Application.
- M

Development and consolidation same system

Hello All,
Can i declare both the development and consolidation as the same system without specifying test and production system in a track? If yes then is there any other factors to be considered?
Also the SC state is in grey whereas if i click synchronize DC dependencies it turns green. Any suggestions on this?
Regards,
Anand

HI,
Can i declare both the development and consolidation as the same system without specifying test and production system in a track?
you can declare development and consolidation as the same system. but then you wont be able to distnguish between the changes you made.
keeping consolidation virtual is an good option than keeping development and consolidation as the same system.
and without specifying test system is not a good option, test system should have to be there, as at that stage only you assemble and check you development as a complete application.

Development and Production SLDs

We have completed Development and testing of XI objects and are at a stage to transport the objects to Production. We have two SLDs for XI, one for Non-productive systems and another for the Prod system. As regards to SLD entries for transport to Production, I though the following is the process
1. Create Production Business systems in DEV-SLD putting them in the right Business group
2. Export DEV-SLD entries
3. Import the file into PROD-SLD
4. After go-live only delta SLD entries would be exported and imported into PROD-SLD
In the following Weblog, /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation, Yuvaraj talked about SLD data supplier bridge from Dev SLD to Production SLD. Is this absolutely necessary? With the bridge operating, what happens if somebody deletes a business system by mistake in Dev SLD?
Any inputs would be appreciated and rewarded

Bhavesh,
My reason for not having prod entries on Dev SLD is that if Prod Entries are going to be on dev SLD, then why have a separate SLD for Prod itself?
My logic for this would be during development, create all the Production Business Systems in DEV-SLD and transport them to PROD-SLD. At runtime system uses Prodcution-SLD. I guess the differernce is design time vs Runtime.
But once again, SAP recommends a single SLD and so when the landscape contains multiple SLD's there are no rules on how to go about this and so either way things will work fine :-)
SAP's recommendations seem to have changed off late. Though in online help they have again and again mentioned that one SLD is recommended, I do know that some internal SAP Consultants recommending separate SLDs for non-productive and productive purposes. There are also documents on Service market place providing information on how to set-up two SLDs for productive and non-productive purposes.

View jobs with SQL Developer and export to file with delimiter

Hi,
is there a way to view, create and alter my database jobs with SQL developer?
And is it possible to export tables, views or simple queries to file delimited different from the CSV standard?
Diego.

Hi and Welcome to the Forum!!
To select data from a table or a view you must use the SELECT sql command. Example to get the data from your view you can
select ZMATNUM,ZMATCUR,ZMATATTR from ZMATERIALAs you have said you are using SQL Developer just execute the above query in your sql developer and it will show the data. Right click the grid and export the data to excel file.

SQL Developer and Blocking View of Other Users' Objects

I am using SQL Developer in a classroom environment. My student users can “see” Other Users objects. They cannot modify, but none the less can see the structure and data.
I only want the users to be able to see their own objects. Is there a privilege that needs to be revoked? (In using SQL Plus command line, this was not a problem.)
Thanks.
-Karen

Karen,
From sysdba account (sys/system). Run following and verify for that particular user grant is revoked. May be exit from sql developer and log back in or refresh view.
YOu can also potenially revoke all the privs from all non admin uses i.e.r even connect/resource roles and grant them back.
revoke select any table from yourschemaname;
revoke connect from schemaname;
revoke create session from schemaname;
revoke resource from schemaname;
Then just grant privs as need basis
grant connect to schemanme;
grant resource to schemaname;
grant create session to schemaname;
..Regards
Edited by: OrionNet on Jan 23, 2009 2:01 PM

CF10 reverted to Developer and remains there

Similar Messages

Maybe you are looking for