CF10 & Windows Server 2008 R2 cgi.auth_user Windows-Authentifizierung arbeitet nicht !

CF10 & Windows Server 2008 R2 cgi.auth_user Windows-Authentifizierung arbeitet nicht
Hat jemand einen TIP ? ,... komme absolut nicht weiter ?
Benötige dringend Client-User-ID als Authentifizierung
dETsmi

hallo,
Bitte überprüfen Sie die unten aufgeführten Links (Please check the links below)
http://forums.adobe.com/thread/1031711
http://forums.iis.net/t/1198107.aspx/1
Danke
VJ

Similar Messages

CF10 on Windows server 2008 (64bit): 32-bit CF cannot be installed, but 64-bit can.

Hi, I have exhaused my research and ways of fixing this issue.
I have a Windows Server 2008 (64-bit).
I am able to install 64-bit CF10 on it and CF websites run just fine.
On the same machine, I have a ASP website that must be in run in 32-bit and within this website there are some ColdFusion pages. So I have to install CF10 32 bit. So I uninstalled CF10 64bit.
When installing CF10 32 bit, I always got error message:
Cannot configure IIS connector. Enable the required option ASP.NET, ISAPI Extensions and ISAPI Filter in IIS under Windows Features and try again.
I did lot of online research and found RELATED posts, but none of them worked for me. Basically, in my case I have the IIS following installed
ISAPI Extensions
ISAPI Filter
ASP.NET
CGI
but I alway got the above error message. Cannot think of other reasons.
Any help is really appreciated!!! I have been working on this thing for the past three working days.
Regards.

Hi,
I saw your post which is similar to the problem I'm trying to solve. I'm not sure if I need to post a new topic, but I thought just add it to your post.
I installed CF10-64bit on Windows 2008 server (64 bit). When I opened the CF admin, it gave me an error - HTTP Error 500.0 - Internal Server Error. The page cannot be displayed because an internal server error has occurred. Module: IsapiModule, Handler: cfmHandler, Error Code: 0x800700c1. After searching for solution in the internet, I finally made it work after changing the DefaultAppPool which is used by the CFIDE in the advance settings, the "Enable 32-bit Applications" to False.
Now, my problem is I have an ASP application which requires that the application pool advance settings must be set to True for "Enable 32-bit Applications". I created another application pool for this application. It woks fine. However, this ASP application calls some CF pages and I'm having a problem because the CF10 is set to use a different application pool with diferent setting for "Enable 32-bit Applications".
In order for my application to work, it seems that I need to install the CF10 32 bit version. Am I right? Or is there a work around for my issue?
Thanks in advance for any help.
I'm going to create a new post for this.
Message was edited by: tibay

Satellite A505-S6004 - Unknown device on Windows Server 2008 R2 64bit

I was try to install Windows Server 2008 R2 64 bit on a A505-S6004 (originally Windows 7 Home Premium) on a new disk. Having downloaded and installed numerous Toshiba website drivers for Windows 7 and installing, I have two things left in device manager that I don't know what to get for them.
The info is under Other devices-Base System Device-PCI Bus 3, Device 0, Function1 and ..., Function2.
Any ideas what this may be?

It turns out I missed a driver, Ricoh Card Reader for Windows 7:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2515201& rpn=PSAT6U&modelFilter=A505-S6004&selCategory=3&selFamily=1073768663#

OBIEE - Windows Server 2008

Hi,
Im having trouble atm to find my customer support identifier so im hoping someone could answer me here.
We have Windows Server 2008 R2 x64 Enterprise Edition on a brand new server. It should have been Windows Server 2003, but it got delivered with wrong specs. Now we have doubts whether to send it back for reinstallation and miss out on a server that we need, or try to install OBIEE so we use it asap. Normally we use OBISE1, but it isn't supported according to Oracle.
In the System Requirements and Supported Platforms for Oracle® Business Intelligence Suite Enterprise Edition document (e10417) it states that OBIEE 10.1.3.4. supports Microsoft Windows Server 2008 Enterprise Edition x86 32 bit. A footnote here states that:
Windows and Linux 64-bit support: For the Windows and Linux releases, the Oracle BI EE software is 32-bit. The
software can run on 64-bit processors that support 32-bit emulation. The supported processors are AMD64 and EM64T.
NOTE: Revisions A and B of this guide incorrectly listed Itanium2 as a supported processor.
Does anyone know if Windows Server 2008 R2 x64 Enterprise Edition fits this description? It's an Intell processer and i don't know if it has emulation.

1. Install the 32Bit version of Java
2. Put the JVM in everyone's Path
3. Configure compatiblity Mode on the Setup program for OBIEE, you must use Windows Vista 2 compatibility mode
4. Configure IIS to have ISSAPI extensions, ISAPI Filters, CGI, IIS 6 Management compatibility, WIndows Auth
5. Configure the default App pool in IIS to support 32Bit applications
6. Run the Installer as Admin, choose default options
7. NOTE: The WIZARD lies about success, check the install.log file at \OracleBI\log for the Truth
8. After Reboot, oc4j will start and the services will be running as system.
9. Change the services to run as you Service Account, Restart services
10. The Wizard will mess up the configuration of the ISAPI plugin
Open IIS Manager
Config an ISAPI restriction for Saw.dll
on my system it is f:\OracleBI\web\saw.dll
Allow the extension path to execute.
11. Restart IIS
12. Configure the Default web site to allow anonymous and windows auth
13. Login using the default credentials as administrator
You may be prompted by both IIS and OBIEE for passwords.
Use your domain ID for IIS, and administrator for OBIEE
14. Configure the Analytics website to require windows auth
RESTART IIS
You will no longer be prompted by IIS, but OBIEE will still ask for user/passwd.

Installation problem on windows server 2008 r2 datacenter edition 64bit

hi
today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
thanks for feedbacks!
regards, jan

> no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
If you take the time to give exact error messages then someone will be certainly able to help
> on windows server 2003, there are NO problems.
Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
Markus

Unable to open Office files on SharePoint 2010 sites on Windows Server 2008 R2

Setup: Windows SharePoint Server 2010 sp1 on Windows Server 2008 R2 (hosted on VMWare VSphere ESXi 5.1)
Secured using Domain SSL from GlobalSign.
Client OS: Windows 7 Professional 32bit & Windows XP SP3 32 bit
Browsers: IE10, IE9,IE8
Office: Office 2010, Office 2010 sp2 (both 32bit), Office 2007
Problem Description: Only recently, users started having issues with opening Office files (Word, Excel) on SharePoint sites. When you click on an Office file e.g. Word Document, it comes up with the option to select "Ready only" or "Edit"
and choosing either options and re-entering the login credentials results in the
application hanging. If you leave it for a while (about 5 minutes) sometimes the file opens and other times it gives the error "Could not open https://portal.com/XXX/XXX/Document.docx". Even when it opens, it's extremely
sluggish and can't do anything other than end it via Task Manager. Same with excel files.
This happens to all the users all different OS and browsers.
On XP Pro SP3 w/ IE8, when you click on the file, the login prompt keeps popping back up repeatedly and if you click cancel, the file loads up anyway but no way of saving back onto the SharePoint site.
IMPORTANT: One exception is when logged in as a Site Collection Administrator, it
works like a dream bizarrely!!!! Opens, Edits and saves back fine on the SharePoint site.
Have tried following:
1. Repaired Office 2010 Pro; Uninstalled/Re-installed Office 2010 Pro
2. Reset Browser, unticked automatically detect proxy settings.
3. Emptied OfficeOfflineCache on Client
4. Removed WebDAV from the SharePoint server
5. Added Antivirus folder exclusion (We use SEP 11) on the SharePoint Server
Note: PDF files opens fine for all users.
I would immensely appreciate if anybody has got any advice/pointers/suggestions. Desperately out of ideas at the moment.
regards,
Compter Sez No!

Hi,
According to your description, When you try to open a Microsoft Office document from a SharePoint 2010 site in a client application, the document opens slowly and you are prompted to enter your credentials multiple times.
This issue may be because of SharePoint Web Front End (WFE) server(s) has Antivirus software installed and the exceptions are not set correctly.
I recommend to remove the antivirus software or set the correct permissions for the antivirus software to resolve the issue.
To configure the antivirus exceptions, please follow the guidelines in the below articles:
KB943620:
Folders to exclude when you perform a file-level antivirus scan on a server operating system.
KB952167:
Certain folders may have to be excluded from antivirus scanning when you use a file-level antivirus program in SharePoint.
KB943556:
Recommended file and folder exclusions for Microsoft Forefront Client Security or Forefront Endpoint Protection 2010.
Best regards.
Thanks

Error While Creating Windows Server 2008 SP2 32-BIT Virtual Machine

I am facing an error while creating a Virtual Machine on the Cloud. The Error is below:
Error (610)
Virtual Machine Manager was unable to find a value for the required Sysprep parameter ProductKey.
Recommended Action
Add the missing Sysprep parameter either to the answer file or to the operating system configuration, and then try the operation again.
My Template does not have the Product Key defined. The OS is Windows Server 2008 SP2 32-BIT. Is defining Product Key absolutely necessary? I have other Templates for other Operating Systems and they are working fine. Only facing problem
with this.
Any help would be appreciated.

In the SCVMM world a 'template' is composed of the following: a VHD with an OS that has been generalized (sysprep), virtual hardware profile (settings), and an OS profile.
The OS profile is required to have a product key. A MAC activation key at the minimum. But the key is required.
If you deploy a VM from a VHD, the same customization assumptions are not at play. Which is why it succeeds. (there is no template in this case, there is also no requirement that the OS in the VHD be sysprep'd).
SCVMM has rules. And lots of things don't make sense until you begin to understand them and play within them. (I am not saying that the SCVMM rules are a good thing, just saying they exist)
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

How to install Windows Server 2008 (dualboot) on a PC with Windows 8.1 already on it?

Hi, I bought a new PC with preinstalled Windows 8. Now I need to install Windows Server 2008. Anyone can advise me how to
do it? It has to be in dual boot, in Virtual Machine the display is way too small

You should check out the Boot-to-VHD capability.
Here is how we do it in a lab environment which we got from a Microsoft lab:
-Verify your computer is running Windows 7 or later.
-Verify you have full administrator rights to your currently installed operating system.
-Verify hard disk encryption or other pre-boot security is turned off.
-Confirm that hardware virtualization technology and memory protection are both enabled in your computer's BIOS setup.
Now we just setup the a VHD with an operating system on it (can even use a downloaded server 180 day trial VHD if you are in a rush). Then go to Disk Management and select Attach VHD and point to the file. Note the drive letter that is assigned to the
mounted VHD.
Run a command prompt as administrator and type: " bcdedit /export BCDBackup.bak " to create an exported backup of your boot loader configuration. Now type bcdboot [drive]:\windows.
Now to test your dual-boot configuration, restart your computer and select the new OS boot option.
An optional last step would be when complete to restore your boot loader by running "bcdedit /import BCDBackup.bak" and delete any VHD files.
A more detailed guide written for Windows 7 but still applies for Windows 8 can be found at:
http://technet.microsoft.com/en-us/video/windows-7-boot-from-vhd.aspx
Hope that helps.

How to install KB2950358 on Windows STORAGE Server 2008 R2?

Hello
I am experiencing the exact issue described
here on my WD Sentinel DX4000 nas box which runs Windows Storage Server 2008 R2. This is causing regular crashes and reboots and general unreliability when the memory leak causes all ram to be used up and the CPU is constantly running at 100% which both
increases electricity usage and shortens the lifespan of the system.
I have downloaded the hotfix on that KB article but it refuses to install claiming that it is not compatible. When the underlying Windows Server 2008 R2 OS is the same how can it not be compatible? My theory is that the Storage server version is only used
and available on a small handful of OEM devices and there's barely any information of it on the internet so I think Microsoft have forgotten to add it to the compatibility list for this particular hotfix.
After weeks of searching, I cannot find a way to force install the update. It's not a business-critical system and I've got backups of it so I am happy to try manual or risky efforts to get it installed. I have tried extracting the MSU file but that doesn't
give me any useful files to install it manually or skip the compatibility checks.
I've also tried to contact Microsoft directly but they don't even have Storage Server listed as an option on their support contact page so I've given up there, as a last resort I am hoping someone here can point me in the right direction. Other online forums
refuse to help saying it's too risky with a server but personally I want it installed and will try anything to do so because I've got a £1000 NAS sitting here that is unusable due to this issue. I'd rather not reinstall the OS as the problem reoccurs - I've
tried it already before I found this KB article.
Bottom line, Microsoft have identified the issue and released a hotfix, the server version IS supported, but was not added to the compatibility restrictions of the update so I cannot get the update installed.
Any advice gladly received. Hopefully someone from MS will see this and be able to update the compatibility of the hotfix if nothing else is possible.

I see SP1 is a prerequisite. Also the manufacturer may have specific patch procedures or recommendations so I'd probably contact them directly.
http://support.wdc.com/product/install.asp?wdc_lang=en&fid=wdsfWDSentinel
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to install SQL server 2008 express on Windows server 2008 R2 standard OS

Hi,
I have Windows server 2008 R2 Standard edition (64-bit) and trying to install SQL server 2008 express edition since I do not have SQL server 2008. When I install it I am unable to see Management Studio so I am trying to install management studio as well
but still I am facing issue. Please let me know whether SQL server 2008 express edition is compatible with Windows server 2008 R2 Standard. If not then pls let me know the proper steps to install it.
Regds

Hello,
Service Pack 1 for SQL Server 2008 is required to be compatible with Windows Server 2008 R2.
Please download QL Server 2008 Express with SP1 included from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=25052
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to install IE8 on Windows Server 2008 R2 Datacenter?

Hello.
Can anybody tell me, how to install IE8 on 2008 R2 Datacenter?
I've downloaded this http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx for "Windows Server 2008 64-bit and more..", removed IE11, IE10, IE9 from installed updates, and runned "dism /online /disable-feature
/featurename:Internet-Explorer-Optional-amd64".
And nothing helps. I've got a message "Internet Explorer 8 is not supported on this operating system".

you can't "install" IE8 on WS2008R2, nor on Windows7 - because those OS's shipped with IE8.
IE is an OS component, and so when you "upgrade" or "downgrade" IE, you are affecting an OS component.
What this means is that the "IE8" download you are trying to apply, is actually IE8 for WinXP or maybe WinVista.
You can usually "downgrade" Win7 back to IE8, by uninstalling the newer "upgrade" of IE - this causes the OS to automatically attempt to revert to the prior IE version.
This reversion assumes/requires a healthy OS and component store (CBS), including all the pkgmgr file needed to revert to component.
Sometimes, the component store is damaged, or is missing files.
you may need to check the CBS logfiles, and may need to perform SFC /scannow
You may need to use CheckSUR to repair system health.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

OS Error in starting the OCFS Service on windows server 2008

Hi,
Installing the Oracle 11g R1 CRS on windows server 2008 operating system . It is displaying the folllowing error message
ERROR : OS in Error in starting the OCFS Service
Can any one please tell what could be the issue ..
Thank You

Solved this after some trawling through xml configuration files on the server.
The file C:\Oracle\product\11.1.0\db_1\owb\j2ee\config\http-web-site.xml contains the reference to keystore.jks:
<ssl-config keystore="*%ORACLE_HOME%*/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
changing this to:
<ssl-config keystore="C:\Oracle\product\11.1.0\db_1/owb/j2ee/config/keystore.jks" keystore-password="->keystoreadmin"/>
and the OC4J container starts successfully.
Regards,
-Haakon-

Error In Installing AddOn on Windows Server - 2008

Hello,
I have created an addon on Visual Studio 2005 in Windows Server 2003 OS and then packaged that using B1DE Tool as ard file and run that on my system and the addon is working properly . But when i want to run that addon on system with operating System as Windows Server 2008 the addon is not getting installed and is giving as error message " Incorrect Format " and not even the exe of addon is not running on that server machine .What to do so that my addon works .
Thanks & Regards
Amit

Hello ,
My main problem occurs while creating the ard file .Normally While building AddOn installer file system creates .Ard file in Bin Folder. But when i creates the Ard File by changing the Target CPU as x86 Then a folder named x86 get created in the bin folder of AddOn Installer file without any ard file in that folder.Then i again build the addon installer project and copies the
Exe file of x86 folder & Ard File of Bin Folder and deploy that on Server 2008 .Then the system is throwing a message "
Wrong Digital Signature " that's where i am facing problem while creating ard file bychanging the compile mode to x86.
Please suggest since its causing me problems in deploying on Client Server .
Thanks & Regards,
Amit

Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1

I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min. Then I checked the log file.
Final result:                  Failed: see details below
Exit code (Decimal):           -2068053929
Exit facility code:            1212
Exit error code:               87
Exit message:                  Failed: see details below
Start time:                    2014-03-18 14:59:31
End time:                      2014-03-18 15:00:25
=== Verbose logging started: 3/19/2014 9:45:47 Build type: SHIP UNICODE 5.00.7601.00 Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
=== Verbose logging stopped: 3/19/2014 9:45:47 ===
Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.

Hello,
The following are a few things you can try:
Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
Try to unregister and register the Windows Installer with the following two commands:
msiexec /unregister
msiexec /regserver
Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
http://technet.microsoft.com/en-us/sysinternals/bb896645
Share with us the error captured by Process Monitor.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

CRM 7.0 installation failed on Windows 2008 R2 SQL Server 2008 SP1

Hello I'm currently trying to install CRM 7.0 on a windows 2008 R2 (64B) plateform with SQL Server 2008 SP1 as database engine
while launching sapinst.exe i'm facing this issue that i cannot get rid of it
Could someone Help , would really be appreciated as i'm a newby on SAP world
thanks a lot
Unable to start a service execution. Please check the following information for the possibble reason and inform the installation development : Opened sylib701_1.dll exe dir is C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336 Opened C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/iaguieng701_1.dll receiving and sending on port 21200 Environment variable SAPINST_JRE_HOME set to value 'C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/jre'. exe dir is C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336 Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x. Opened C:/Users/SAPINS~1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/iakdblib701_1.dll This is SAPinst, version 701_1, make variant 701_REL, build 1015514 compiled on Oct 3 2008, 01:51:15 MessageLib initialized successfully. showing dlg diProductChoice <dialog sid="diProductChoice"> <title>Welcome to SAP Installation Master</title> <dialog/> Login in progress Connection request to guiengine backend by host 169.254.138.68 Protocol version is 3.1 Send connect information client logged on Waiting for an answer from GUI CDialogHandler: ACTION_NEXT requested <dialog sid="diProductChoice"> <dialog/> Creating file C:\Windows\System32\x. Removing file C:\Windows\System32\x. showing dlg diRestartOrCancel <dialog sid="diRestartOrCancel"> Dialog does not contain standard input handler, so the backend is not able to generate a log entry <dialog/> Waiting for an answer from GUI current working directory is C:/Windows/System32 Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x. Unable to open URL file://C:\Windows\System32\control.xml. The execution will be terminated now.

Hi!
Windows 2008 R2 is not yet listed in the PAM - and hence not yet supported. The technical prerequisites are met (with a special kernel patch) but not all software is released, so you may get it to run technically but not everything is tested and so, you should not install any SAP system on it!
In fact, and just to provide you further details it is not possible to expect the 710 products released for Windows Server 2008 R2 before around four weeks; 700 products will be released even after 710.
See [SAP note 1383873|https://service.sap.com/sap/support/notes/1383873] ("Windows Server 2008 R2 Support").
You can be always up to date with the latest Windows news at:
[SAP on Microsoft Windows|SAP on Microsoft Windows] --> Support of Microsoft Windows Server 2008 R2
Cheers!

CF10 & Windows Server 2008 R2 cgi.auth_user Windows-Authentifizierung arbeitet nicht !

Similar Messages

Maybe you are looking for