CF8 Document PDF cutting off text

I am facing text cut-off during CFDocument PDF page breaks.
I am using CF 8.
Anyone can help Plz ?
Thanks,
-SKS

We are experiencing the same problem, nearly a year after this original post.  All hot fixes applied and the problem persists.  Our data is not really a report exactly, we aren't looping through queries we are building dyanmic content based on some forms.  So we can't use any of the work around methods like counting the number of rows and such, at least not without some major recoding of approx 50 included files.  Documentation says that cfdocument supports the CSS style page-break-inside, but it appears to ignore it.  The problem is also not corrected in CF9 because we have tested it there as well.  No matter what we try to do the CFDocument tag will break in the middle of a table row / text if it happens to fall at the page length where cf wants to break the page.
This is highly annoying and a large problem as the print outs are for medical data, and the doctors need to be able to read the text, not only have half of it show up on one page and the other half on another page.

Similar Messages

  • Export as PDF Cuts Off Text

    I'm currently on BO Enterprise XI 3.1 FixPack 2.4  When I schedule Crystal Reports to run and export as PDF I'm starting to see that in the PDF, the text fields are cut off at the top, bottom, and right side of the report.  So its missing the very top of the text at the top of the report, or on the right side, its cut off.  Any assistance would be appreciated.

    This question has been answered multiple times, please search before posting.
    See this [note|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap%28bd1lbizjptawmq==%29/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233323330333533313336%7D.do] on how to correct the sizing.
    Thank you
    Don

  • Calendar ordering issues (cut-off text)

    I have a calendar that I have successfully ordered and received in the recent past.
    Two more recent orders for the same calendar have given rise to messages from "print services" that they cannot print the calendar because of cut-off text.
    There is no cut off text in the calendar but when I do a print preview I see that each month is cut off (Janu.., Febr ..., etc.) and the year does not appear as it does on the versions I have already received.
    Has anyone else encountered this problem? Can anyone from Apple tell me what to do? I don't seem to be able to act on this part of the text.

    Christopher:
    Try clearing out the iPhoto cache folder inside your User/Library/Caches folder. See if that will help.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Je veux convertir un document pdf en word, texte en anglais. Texte illisible. Comment faire ?

    je veux convertir un document pdf en word, texte en anglais. Le texte est illisible. Il reprend quelques passages en anglais et le reste est fait de signes très bizarres.
    Comment arriver à un résultat correct ?
    merci d'avance pour votre aide.
    Cordialement.

    Si el texto del PDF no se puede leer, probablemente está escrito en una fuente que no está en tu sistema. Si es así, no se me ocurre qué puedas hacer, excepto instalar la(s) fu7entes faltantes, o pedir al autor del PDF una nueva copia con las fuentes debidamente incrustadas.

  • Excel 2007 Converted to PDF cuts off information

    I am using Acrobat 8.1 and I am having trouble converting the information from Excel 2007. Some of the text in the cells are cut off on the ends. Is there some kind of tweak to stop this? Thanks

    Select the Adobe PDF printer in the print menu. Then go through the Excel file. Excel (like WORD) reflows the document to best fit the printer. In this case you are apparently outside the printing range of the Adobe PDF printer. You may have to reduce the font size.

  • Cut off text on iPod summary screen

    Text on the summary screen for iPods is cut off. iPod description is cut at the bottom of the font text. Text in the options field doesn't show full description. It just ends in ... I can't even mouse over to get a full description and the iTunes help is horrible.
    Examples:
    Open iTunes when this iPod is ...
    Prefer standard definitio...

    Is your display resolution currently set to at least 1024x768, Jay, as per the following document?
    [iTunes: May not display all options at low screen resolutions|http://support.apple.com/kb/TS1845]

  • Word file save as PDF cut off on right side. How do I fix it?

    I saved a Word file in PDF. When it opens in Preview, the end of the lines on the right side are cut off. How do I restore the text to full size?

    Sounds like the dialog is off screen. You can try to reset the Preferences by using Cmd-Opt-Shift on restarting AI. That might bring it back to the current screen.

  • PDF cutting off right side

    When I save an MS Word document to PDF - the right side of the page is cut off... How can I stop that from happening?

    You'll probably want to ask in an MS forum. It's their product being used to create the PDF.

  • ICal cuts off text of some events in month view

    I've noticed that iCal cuts off the text of some events, while displaying the full text of longer events in the month view. For example, if I create an event titled "Test Event" only "Test" shows up in the day it's created, but if I enter "Longer Event" the entire text shows up, on two lines. These events are on separate days with no other events on those days, so there's nothing to get in their way. Why is this?

    This is so utterly annoying- I never had this issue with previous versions of iCal, and I can't even run those versions on tiger now that I've upgraded. The tiger upgrade in general has disrupted my workflow much more than I thought it would-
    Because of the way I use iCal, not seeing the full even title in month mode makes iCal pretty much useless to me. I don't want to have to click between dozens of events that begin with "Renders of" to find which set of renderings are due on which days. Nor do I want to go through and rename all of my "Renders of Levels 1a-3c" etc to make the titles more useful. It should just WORK.
    Well, let me know if anyone finds a better way of making this work other than "resizing ad lib until things sorta show up"

  • Cut-off text. Please help me. Thank you.

    Hello,
    I published my site several weeks ago with no problems at all. Now, suddenly, text (rendered as images) throughout the site is being cut-off, sometimes to the point of invisibility.
    my site can be found at: http://www.milescollyer.com/
    (I can provide screen shots of how it appears in iWeb versus Safari if needed)
    I have tried almost everything that I can think of including:
    -increasing the size of text boxes to a generous size
    -increasing/decreasing the size of the font
    -moving the text boxes up and down slightly in an attempt to fully reveal the text
    -deleting and remaking text boxes
    I have been reviewing this forum for days looking for help with this problem. I am at a loss of what more I can do. PLEASE help.
    Thank you,
    -miles

    I noticed there are also diamond symbols with ? in them which are showing up too. Are you creating your text links within iweb and then using the inspector to link them to other pages? I have seen this type of problem when putting in forms, but never with text links. One way around this might be to link the text box instead of the text to other pages. for example, when you highlight the text and go to the inspector then enable as a link simply do the same but dont highlight the text just select the text box. Try it on a few and republish, its worth a try. You also might want to try this first, do a publish all rather than just publish. To do this go to file and select publish all to .mac. Sometimes this is an easy fix to weird problems. Your site looks nice and I hope you can get it up and running. Good luck.

  • Exporting to PDF cutting off right side of the page.

    I am exporting a Crystal Report to PDF. This works perfect on our development and staging server. However, on the production server the PDF is cut off on the right. Like, instead of being 8.5" wide, it looks to be about 7.5" wide? It just cut off the right side of the PDF. Very weird. Republished the site but did not change anything.
    But here's the odd part. We have another Crystal Report on the production server that exports to PDF just fine. Just this one report, "invoice2.rpt", is having issues. "invoice2.rpt" was originally copied from "invoice.rpt" so all of the settings (that I have looked at) are exactly the same. This report was formatted a little differently than the original.
    Does anyone have any thoughts about what might be causing this to happen?
    Thanks,
    Randy

    Hi Randy,
    I have seen a similar issue in the past and the problem was due to the fact that some fields and or objects were placed in part or completely outside of the margins of the report. This can be checked opening the report from Crystal Reports > Design view.
    I would suggest opening the report from Crystal Reports, select the option 'No printer' from File menu>Page setup and double-check that the report has been created inside the report margins (From Design View, the report space should be white except if the background colour has been modified).
    If this does not help, please clarify if the issue is faced from Crystal Reports or from Business Objects Enterprise/Crystal Reports Server and the version you are using.
    Thank you,
    Selenia

  • The right-click link menu in Firefox 29.0.1 on Mac OSX 10.9.3 does not fully display options (cuts off text)

    When I right click on a link, the usual menu I used to get in older versions of firefox still shows up. However, it shows up in a box that's much, much smaller than the size of the box in previous versions. The text gets cut off and while I can scroll up and down, I can't scroll left to right to read the text of the option. Actually, I've noticed that this happens with most right click menus now.
    For example, if I right-click on a link, I get:
    Open Li...
    Open Li...
    Open Li...
    (down facing arrow to hover over to see the rest of the options)
    All of the system and Firefox fontsize, menu size etc. are at their default. I haven't changed anything.

    You can check for problems caused by a corrupted localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    You can use this button to go to the currently used Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    Create a new profile as a test to check if your current profile is causing the problem.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Can only see the first page of document and when I scroll the document is cut off.

    I was sent some notes from my professor but I am only able to see the first page and when I scroll, it shows the document cut off.

    Thank you so much!! So simple, yet so effective! Am happy!

  • Any Way To Have Dreamweaver Cut Off Text Past 100%?

    Does anyone know if there is a way to make Dreamweaver cut off your text if it is past 100% of the screen size?  Thanks.

    Deleted, not wrapped.
    It's no big deal though.
    The thing is I want it right at 100% so it fills up the width of the whole screen.  But, it doesn't work right, because people have different size screens for one thing and the other thing, what I want is a straight line across the screen.  Like if you were to go to style>underline and then, continually hold down the shift+ctrl+space bar until it got all the way to the end of the screen.  However, when I actually preview it in my browser, it is not the whole screen (much shorter).  So, then the only option is to make it really long to ensure that it does actually go to 100%, but then I would have to have Dreamweaver cut off/delete any extra text because I don't want a horizontal scroll bar across the screen.  And, I don't think DW can do this.  Too hard judging the 100% and it would be different on different monitors anyway, so guess I won't be able to do it.  It's no big deal though.

  • Autosizing popups cutting off text

    Using RH 10, HTML, compiling a .chm file. 
    In RH8, autosizing popups displayed properly.  Now, once project converted to RH10, popups cutting text off.  Support told me I had to go and edit all of my popup topics and add an extra return.  While this worked, it seems like a lot of work for a function that used to work in RH8. 
    Under Tools > Options, General tab I do have 'Convert RoboHelp-edited topics to HTML' selected.  I also ran Tools > Update DHTML Effects in Topics.
    Suggestions other than editing each of my popup topics by hand???

    You should be able to set the overflow property in your stylesheet to hidden. In order to accomplish this inside of a table cell, you need to specify a span or a div tag inside of the cell. Next you will need to specify the the maximum width of the text that you want to display in the span/div tag that you have created, and set the overflow attribute to hidden.
    Here is an example:
    <table>
      <tr>
        <td>
          <span style="width:50px;overflow:hidden;">
              [email protected]
          </span>
        </td>
        <td>
          donotclipthistext.Itdoesnothaveaspantagwrappedaroundit
        </td>
       </tr>
    </table>Hopefully this will be helpful.

Maybe you are looking for