CF8 Flash forms nor server monitor not working on authenticated server

Have bee troubleshooting an issue with the server monitor and
flash forms not working on a CF8 server that is completely
authenticated. You can see the full thread of the issue here
http://groups.google.com/group/houcfug/browse_thread/thread/71160184e762587f?hl=en
In the pre-cf8 days, we had implemented the following "fix"
for NT Authentication with CF Templates
http://www.adobe.com/go/tn_18516
However, when I uncheck the "Check that file exists" flag in
IIS6, both the server monitor and the CFFORM type = flash are now
both working. Am I making a tradeoff between NT security and
Flash/Flex?
My question is this, is the "fix" referenced in the KB
article abonve still needed for CF8?
If so, do I have to decide between security and Flash/Flex or
is there a way to have both NT security and flash/flex on the
server?
If not, I would suggest that somebody from Adobe make an edit
to the KB article pointing out that the "Fix" is not needed for CF8
and if implemented will break the server monitor and flash forms
and Flex on that CF server.
Thanks,
M

I mean when I open the administrator and click on Launch
Server Monitor it does nothing. Does not open and as far as I can
tell no error is generated or logged. If I open it outside of the
the administrator it opens but when I click on Statistics or Alerts
I get a logon Server Monitor logon box that tells me that the
ColdFusion Server is not started.

Similar Messages

Flash Player And adobe reader not working and downloads don't work

I have IE 8 and windows vista and everything has worked great for 2 years until 2 or 3 weeks ago. At that time my flash player stopped working so I could no longer get videos , streaming stock quotes, weather map loops, etc and when I go to websites that use Flash (i.e. Piaaz Hut) it wouldn't work. Also, at that same time my adobe reader stopped working properly and I can't view mosy PDF Files.
I have gone through many of the posts on this forum and have tried many of the fixes, but none have work for me.
I tried to uninstall the Flash Player, but I didn't use the Adobe uninstaller.
Whenever I try to update or load the Flash player, a dialog box with the globe tossing papers to the folder appears and then after a few seconds I get the the message that IE can't install_flash_player_ax.exe from fp download.adobe.com, and then a message that says IE was not able to open this internet site. The requested site is either unavailable or cannot be found.
In control panel programs I have listed
Adobe AIR      no size
Adobe Flash Player 10 active X           no size
Adobe Reader 9.3     141mb
Macromedia Shockwave player      no size
In Tools i have the following add ons and they are all enabled
Shockwave Flash object 10.0.42.34
Adobe PDF Link Helper
Adobe PDF Reader
Macromedia Shockwave Active X Control 10.1
As I said I've already attempted a number of the fixes on this forum, but so far no luck.
Does anyone have any suggestions on what else I might try?
Thanks

Ok, I tried to download the firefox browser but IE wouldn't let me download it. My friend downloaded it from their computer to a flash drive and I loaded it to my computer from the flash drive. The download of Firefox from the flash drive worked, and now I'm using Firefox & both my adobe flash player and my adobe reader are working just great.
However, neither the flash player nor the reader are working if I use IE, so I guess I will just have to use Firefox as my browser.
I'm going to mark my question as answered since I really don't care that I have to use Firefox instead of IE,although I can't understand why it works using Firefox but not using IE.
Thank you so much for your assistance in walking me step-by-step through this problem until I was able to reach a satisfactory solution.

FLASH PLAYER 10.1 does not work on my 32bit browser

the newest version of FLASH PLAYER 10.1 would not work on my 32bit FIREFOX browser. so I installed flash player on a 32bit VERSION of internet explorer. it worked fine for a few days till ADOBE asked me if i wanted to update my player. NOW IT DOES NOT WORK ! ! ! NOW IT DOES THE SAME "GREEN FLASHING BLANK SCREEN THING" THAT IT DOES ON MY FIREFOX BROWSER ! ! ! WHAT GIVES ? ! ? ! ? !

Hello I have a Dell inspiron 6400 computer with window's home vista and with the latest standard Internet explorer. i was enjoying the fact that i could watch Youtube and other such sites until i was prompt to downlaod the latest version (10.1) flash player. which like anyone else I did, but not the mcfee anti virious as it would be inconflicsion with Norton anti virious.
Now when i go to view a youtube etc I just get a blank or black screen.
Please how can i rectify this problem
ta,

InDesign Buttons and Forms... Not Working

Hello Guys,
I'm using Adobe InDesogn CC 10.1.0.70 x64 Build, the problem is with the check box option from Buttons and Forms, They are, simply, not working... I'm trying to add a check box on my pdf I'm creating in InDesign.. I'm using checkbox from "Sample Buttons and forms".. but nothing is working.. I'm just dragging the Check Box samp and drop it in my canvas, exporting it as PDF with "Hyperlinks" checked.. and Interactive Elemnts with Include Appearance chosen but the check box doesn't having any action!! I don't know what I should do to make this work please help

Start by restoring your InDesign preferences:
Trash, Replace, Reset, or Restore the application Preferences

Flash player download web site not working

After uninstalling flash player, I can't get the web site to reinstall it. I go to the web site click the agree and install now and gos to the next page but nothing pops up like it said it should.
http://get.adobe.com/flashplayer/thankyou/activex/?installer=Flash_Player_10_for_Windows_I nternet_Explorer&i=McAfee_Security_Scan_Plus&d=Google_Toolbar_6.3

Hi eidnolb,
My OS is windows 7 Ultimate. There no Service packs listed Microsoft don't have one for it yet. My brower is Internet explorer 8 version: 8.0.7600.16385. My firewall is not causeing problems and the popup blocker didn't even activate.
Date: Wed, 14 Apr 2010 10:01:33 -0600
Subject: Flash Player flash player download web site not working
Hi newcomer76, Please post back your operating system and if any applicable Service Packs, any and all browsers that you use with the versions.
With that information, I'll be able to give you instructions and the links you need.
Thanks,
eidnolb
>

Server monitor not working (hardware monitor)

Just finnished installing my brand new maxed out Intel Xserves. And the Server monitor isn't working.
This thread:
http://discussions.apple.com/thread.jspa?messageID=643361
Didn't solve my problem. hwmond is running on the Xserves but each server line just says "Waiting for response". My /System/Library/ServerSetup/SetupExtras file doesn't even HAVE a Disabled key. It has Label, OnDemand, Program, ProgramArguments and ServiceIPC keys, but no Disabled. And the hwmonds is running anyway.
I have opened server monitor on the xserve itself and tried to open it to itself with no luck. I have configured Lights out management by choosing Server->Configure local Machine and added another IP there with different login, but I can't connect to either IP. Firewalls are all turned off.
Running /System/Library/ServerSetup/SetupExtras/hwmondSetup just says "already loaded"
Server Admin works, I can log in and edit services. Workgroup manager also works.
When i run the hwmond as root on the server, it says "Failed to communicate with the front panel" which could be due to hwmond already running, but I can't turn off the process since launchd (?) launches it again.
When I choose "Configure local Machine" the password I entered is always blank, but maybe that's by design.
Since these servers aren't installed yet I have them in my office and their IP's are temporary, so I read this:
http://docs.info.apple.com/article.html?artnum=106830
And it says that for this environment I should set the hostname to "localhost" in /etc/hostconfig. Done. Nothing changed.
I've googled this and searched here but found nothing. I'm running out of options... What should I do?

I set the server on a desk and do a fresh install off a DVD with the "erase HD" option. Then I install and configure the software I need (Software update, Sophos, power options, etc.) I did not configure LOM at that point, because I wasn't sure how to do it, and I needed to deploy the server. (luckily LOM was easy enough to set up after it was deployed.) Once the server is ready, I connect a FireWire HD to it, which has OS installed on it and boot from that.
That way my server is just an attached disk, and I use Disk Utility to create an image of it, which I then deploy on other servers.
I've had an issue with the G5 XServes where such a method required relatively simple modification before the server monitor would work:
http://docs.info.apple.com/article.html?artnum=301046
But, I've not had to do that with the Intel XServes.

Server monitor not working

Guys,
I have server monitor installed on a 10.5.8 client mini to monitor our 9 xserves and it works fine on all the older ones (all G4 or G5 xserves running tiger or panther) but will not detect any of the 4 new Intel Xeon xserves running 10.5 (mixture of .6 and .8). In each case it alternates between reporting "Software is not installed properly on server" and "CANNOTLOAD_BUNDLEERR".
I'm assuming this is something specific to 10.5 - some sort of SNMP setting or something perhaps? Obviously I've checked the passwords, I'm using root username/password for each one, all the servers are on and available, and like I say, it's working fine on the older ones.
Anybody had any experience with this and know the answer?
Further info: 3 of the servers (of which one is 10.5 and not working) are on the local network (local to the monitoring mini), the remaining 3 10.5's are each on other LAN's to which I have a currently working VPN. In each case the 10.5 machine which isn't working is on the same LAN as an older machine that is, so I know that's not the issue.

The Intel XServes seem to operate differently than the old G5 units when it comes to LOM. Mine has been giving me a bugger of a time getting Server Monitor to work properly, but right now it seems to be functioning..
Have you gone to Server Monitor on each of the Intel units and set up the "Configure Local Machine" from the Server menu? It should reject you if you enter the IP address of the Ethernet connection to your LAN - you have to use a different IP address. Configure only the information for 'Network 1' with the info for your LAN.
It may be purely anecdotal, but it seemed to start working for me after I enabled the firewall on the server, leaving all the ports on the LAN open and shutting everything down on the other address groups.
-Douggo

Why does Server Monitor not work with non-Xserves?

Does anyone know why Server Monitor does not work with non-Xserve computers? We acquired a Power Mac for a server, based on there being no apparent difference except for the obvious. Turns out there are some differences after all.
Do Power Macs lack some hardware components or is this just a software thing?

God question, unfortunitly I dont have the answer but I would also like to know why the software only works for X-Serve....Is there any 3rd Party Software that is similar to "Server Monitor"?
Thanks

Unityconnection Port Staus Monitor Not Working

Hi ,
Port status monitor is not working. unityconnection version 7.1.5.
We enabled the port status monitor & given the PC IPaddress.
Enable Remote Port Status Monitor Output
IP Addresses Allowed To Connect For Port Status Monitor Output (comma-separated)

I'm assuming you have an IP addressed filled in and it's just not on your screen shot...
What version of rPSM?
rPSM uses port 5000 to communicate with Connection (this is noted in the help but I should probably put some static text to this effect on the login form for clarity). Make sure it's not being blocked between your client and the Connection server.
Beyond that there's not much that can go wrong - it's simply getting text streaming off that port once your client has been registered (Connection wont talk to any client that doesn't have an IP that matches in the list there).
No DB or other connections are needed or are in use.

Forms Web application is not working on FireFox Browser-with java plugin

Hi All,
We are running custom build forms application using forms 10g and application server 10 g Rel 2. We are using Java Plug-in 1.5.0_06. The application is working fine before recent update from firefox .Now it's not working and keep on asking additional plug in required and taking to java.sun.com for installing the plug in. Even after installing when we access the application it will do the same thing. I tried uninstalling the firefox with the older version and with diffrent java plugin versions.. but the problem still there.. any help will be mush appriciated...
Thanks...
Edited by: rkadaru on May 5, 2010 1:57 PM

plugin and webstart are not yet available in 64bit jre distributions from Sun.
These are targeted to 6u12 or there abouts.
/Andy

Hcm forms : Update display button not working

Hi experts
the update display button in my form is not working . i have changed the script coding , still its not working
Regards
Priya

Hi,
Update display button is not working means is it not triggerring the back end means you are not able to see any server roundtrip,
if so check whether you have inserted webdynpro script.
if not go to your form in sfp
then goto menu select Utilities->Insert Webdynpro Script.
then you will see one script generated automatically and you can check in Hierarchy Pallete with the name ContainerFoundation_JS under Variables.
save the form and activate and then click on Update Button.
Thanks,
Madhu.

Flash player silent auto update not working

I was glad to read the news about the new feature of silent auto updates of the Adobe Flash player, but unfortunately this is not working on my machine. Has anyone had the same problems and was able to solve them?
Some information on my setup:
I had previously installed Flash player version 11.1.102.63, both ActiveX and Plugin version (installed through the .msi files, deployed via Active Directory/GPO - no further configuration, just plain original .msi files).
To test the auto update feature, I decided to install the new 11.2.202.228 version, but only the ActiveX version. I installed this via the .exe installer (install_flash_player_11_active_x_32bit.exe) manually, choosing "Install updates automatically when available (recommended)" in the last step of the installation, as seen here:
http://www.adobe.com/devnet/flashplayer/articles/background-updater-windows.html
When I open Control Panel -> Flash Player, under the "Advanced" tab I see:
"Install updates automatically" is chosen, but greyed out (no admin rights with this windows user)
ActiveX version: 11.2.202.228
Plug-In version: 11.1.102.63
The file "mms.cfg" under C:\WINDOWS\system32\Macromed\Flash\ contains:
AutoUpdateDisable=0
SilentAutoUpdateEnable=1
The task "Adobe Flash Player Updater" was created and is scheduled to run every 1 hour. I can see that it is started ("last start time"), the result code is 0x0 which means "no error".
So everything as expected. But the auto update is not working, since the plugin version of flash player never gets updated!
I edited the "mms.cfg" and added:
SilentAutoUpdateVerboseLogging=1
After manually starting the task, there are some lines added to "FlashInstall.log" in the same directory:
2012-4-4+7-20-48.814 [info] 1614
2012-4-4+7-20-48.829 [info] 1615
2012-4-4+7-20-48.829 [info] 1618
2012-4-4+7-20-48.829 [info] 1619 1063
2012-4-4+7-20-48.876 [info] 1614
2012-4-4+7-20-48.876 [info] 1615
2012-4-4+7-20-48.876 [info] 1618
2012-4-4+7-20-48.876 [info] 1608
2012-4-4+7-20-48.876 [info] 1604
2012-4-4+7-21-10.425 [warning] 1403 12029
2012-4-4+7-21-10.425 [warning] 1407 183
2012-4-4+7-21-10.425 [warning] 1408
2012-4-4+7-21-10.456 [info] 1624
2012-4-4+7-21-10.456 [info] 1612
2012-4-4+7-21-10.456 [info] 1621
What does this mean?
Some more information:
Windows XP SP3, all windows updates installed, german
Avira Professional Security anti-virus software
Machine is behind a proxy server, but this is set up in Control Panel -> Internet Options
I suppose this is a problem with our proxy server. Does the auto updater not use the proxy information from the Windows Control Panel settings?
Kind Regards,
Martin

Hey Hans,
After reading of your sucsess I attempted to replicate it.
I am happy to say that I managed to update from Adobe Flash 11.2.202.228 to 11.2.202.233 on serveral different windows 7 notebooks and desktops sliently.
I went into the windows task scedular and ran the Adobe Flash Player Updater task (I didn't need to change anything in the task or the service for it to work).
The only issue I found was that if I ran the task again without restarting the computer no requests from the client would show up in the logs from my web server but if I restarted my computer and then reran the task it would work again. I'm assuming that it will only sent requests out every 24hours is talked about in page 18 of the Flash Player 11.2 Administration Guide.
My Web Servers logs look like this:
2012-04-27 05:45:01 W3SVC1967680676 10.135.12.38 GET /pub/flashplayer/update/current/sau/11/xml/version.xml - 443 - 10.135.13.17 Get+Flash+Player+version+xml/1.0 200 0 0
2012-04-27 05:45:05 W3SVC1967680676 10.135.12.38 GET /pub/flashplayer/update/current/sau/11/install/install_all_win_ax_sgn.z - 80 - 10.135.13.17 Download+Flash+Player+Installer/1.0 200 0 0
My mms.cfg looks like this:
AutoUpdateDisable=0
SilentAutoUpdateEnable=1
SilentAutoUpdateServerDomain=proxy.tallangatta-sc.vic.edu.au
I think the biggest issue I had during testing was that I forgot to my web servers certificate into the windows certificate stores trusts root certs of my notebooks/desktops. EG: http://blogs.adobe.com/livecycle/2012/04/rights-management-how-to-get-windows-7-to-trust-a -self-signed-server-certificate.html
I have since deployed the mms.cfg file and added my web servers certificate into the trusted root certs via group policy to all my clients and it is working very well. I have also writen a batch file to download the needed files from adobe for that backgroup updater and to put them on my web server. I created a daily task on my web server to run the batch file. If anyone wants the batch file or shell script please email me and I'll forward it on.
My batch file pretty much looks like this:
@echo off
:::::::::: INFOMATION ABOUT SCRIPT ::::::::::
:: This Script Titled adobe-flash-background-updates and was written by Tyrone Wyatt of www.cloudportal.org.
:: This Script is open to use by everyone and is not under any licence.
:: See flash_player_11_2_admin_guide.pdf for more infomation on how this script is required to function.
:::::::::: SCRIPT CONFIG ::::::::::
:: The TITLE option is the scripts name
set TITLE=adobe-flash-background-updates
:: The LOG option is the log file.
set LOG=./%TITLE%.log
:: The SOURCE option is the mirror on which you would like to download the flash files from.
set SOURCE=http://fpdownload2.macromedia.com
:: The DESTINATION option is where you would like your downloaded files to go so they are accessable by your web service.
set DESTINATION=d:\wwwroot\Proxy
:: The VERSION option is the current major version of Flash Player (for Flash Player 11.2, the major version is 11).
set VERSION=11
:: The Proxy settings for wget to use
set HTTP_PROXY=http://edupass.tallangatta-sc.vic.edu.au:8080
:::::::::: SCRIPT CORE ::::::::::
echo Welcome to %TITLE% Script!
echo =O====== %date% %time% ======== >> %LOG% 2>&1
if exist %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\xml (
echo Skipping destination folder structure creation.
) else (
echo Creating destination folder structure.
mkdir %DESTINATION%\pub >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current\sau >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION% >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\xml >> %LOG% 2>&1
mkdir %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install >> %LOG% 2>&1
echo Downloading files...
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/xml/version.xml -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\xml\version.xml >> %LOG% 2>&1
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/install/install_all_win_ax_sgn.z -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install\install_all_win_ax_sgn .z >> %LOG% 2>&1
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/install/install_all_win_pl_sgn.z -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install\install_all_win_pl_sgn .z >> %LOG% 2>&1
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/install/install_all_win_64_ax_sgn.z -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install\install_all_win_64_ax_ sgn.z >> %LOG% 2>&1
wget.exe -nv %SOURCE%/pub/flashplayer/update/current/sau/%VERSION%/install/install_all_win_64_pl_sgn.z -O %DESTINATION%\pub\flashplayer\update\current\sau\%VERSION%\install\install_all_win_64_pl_ sgn.z >> %LOG% 2>&1
echo Script complete! See log file for more infomation %LOG%
echo =X====== %date% %time% ======== >> %LOG% 2>&1
echo. >> %LOG% 2>&1
:::::::::: END OF SCRIPT ::::::::::
Thanks for your help,
Tyrone Wyatt.

Forms 9i ---- Online Help not working

Hi !
Suddenly on my computer forms9i's Online help is not working? when i click on Help-->online Help option it gives error message FRM-18105 : Failed to Start Help System in a alert. Day back it was working fine.
Any idea about it???
Regards,
Neeraj

Thanks Frank !
I have change some path setting to use webutil but i am still unable to use it. I am getting same error WUC-015. due to this help is not working here i am sending u current path setting.Please tell me what is wrong with it..
Classpath variable of windows
==============================
c:\ora9i\jlib\bigraphbean.jar;c:\ora9i\jlib\LW_PfjBean.jar;c:\ora9i\jlib\bigraphbean-nls.zip;c:\neerajtyagi\webutil\lib\webutil.jar;c:\neerajtyagi\webutil\lib\jacob.jar;c:\neerajtyagi\webutil\lib\demo90.jar;c:\ora9i\forms90\java\f90all.jar
Path variable of windows
==============================
c:\ora9i\bin;c:\dev6i\bin;c:\ora9i\jdk\jre\bin\classic;c:\ora9i\jdk\jre\bin;c:\ora9i\jlib;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\Oracle\jre\1.3.1\bin;c:\jdk1.3.1\bin;c:\jdk1.3.1\jre;c:\jdk1.3.1\lib;c:\jdk1.3.1\jre\bin;c:\jdk1.3.1\jre\lib;c:\Inprise\vbroker\bin;c:\Inprise\vbroker\lib;c:\Inprise\vbroker\idl;c:\Inprise\vbroker\console;C:\ORANT\bin;C:\Program Files\Oracle\jre\1.1.7\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;c:\centrun;c:\win32\exe;c:\cms\lib;c:\cms\Resource;c:\dev6i\jdk\bin;c:\neerajtyagi\webutil\lib;c:\neerajtyagi; c:\neerajtyagi\webutil
FORMS90_BUILDER_CLASSPATH
==============================
c:\ora9i\jlib\importer.jar;c:\ora9i\jlib\debugger.jar;c:\ora9i\jlib\utj90.jar;c:\ora9i\jlib\dfc90.jar;c:\ora9i\jlib\help3.jar;c:\ora9i\jlib\help3-nls.jar;c:\ora9i\jlib\oracle_ice5.jar;c:\ora9i\jlib\ewt3.jar;c:\ora9i\jlib\share.jar;c:\ora9i\jlib\f90srv.jar;c:\ora9i\forms90\java\f90all.jar;c:\neerajtyagi\webutil\lib\weutil.jar;c:\neerajtyagi\webutil\lib\jacob.jar;c:\neerajtyagi\webutil\lib\demo90.jar
FORMS90_CLASSPATH
======================
c:\ora9i\forms90\java\importer.jar;c:\ora9i\forms90\java\debugger.jar;c:\ora9i\forms90\java\utj90.jar;c:\ora9i\jlib\ewt3.jar;c:\ora9i\jlib\share.jar;c:\ora9i\forms90\java;c:\neerajtyagi\webutil\lib\weutil.jar;c:\neerajtyagi\webutil\lib\jacob.jar
FORMS90_JAVADIR
======================
c:\ora9i\forms90\java
orion-web.xml
==============
<?xml version="1.0"?>
<!DOCTYPE orion-web-app PUBLIC "-//Evermind//DTD Orion Web Application 2.3//EN" "http://xmlns.oracle.com/ias/dtds/orion-web.dtd">
<orion-web-app
     deployment-version="9.0.2.0.0"
     jsp-cache-directory="./persistence"
     temporary-directory="./temp"
     servlet-webdir="/servlet/"
>
     <context-param-mapping name="configFileName">c:\ora9i/forms90/server/formsweb.cfg</context-param-mapping>
     <virtual-directory virtual-path="/html" real-path="c:\ora9i/tools/web90/html" />
     <virtual-directory virtual-path="/java" real-path="c:\ora9i/forms90/java" />
     <virtual-directory virtual-path="/jinitiator" real-path="c:\ora9i/jinit" />
     <virtual-directory virtual-path="/webutil" real-path="c:\neerajtyagi/webutil/lib" />
     <session-tracking cookies="disabled" />
</orion-web-app>
formsweb.cfg
==============
baseHTML=c:\neerajtyagi\webutil\server\webutilbase.htm
baseHTMLjinitiator=c:\neerajtyagi\webutil\server\webutiljini.htm
baseHTMLjpi=c:\neerajtyagi\webutil\server\webutiljpi.htm
baseHTMLie=baseie.htm
HTMLdelimiter=%
workingDirectory=
envFile=default.env
# The next parameter specifies how to execute the Forms applet under
# Microsoft Internet Explorer 5.x. Put IE=native if you want the
# Forms applet to run in the browser's native JVM.
IE=JInitiator
form=test.fmx
userid=
otherparams=debug=%debug% buffer_records=%buffer% debug_messages=%debug_messages% array=%array% query_only=%query_only% quiet=%quiet% render=%render% host=%host% port=%port% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
debug=no
buffer=no
debug_messages=no
array=no
query_only=no
quiet=yes
render=no
host=
port=
record=
tracegroup=
log=
term=
pageTitle=Oracle9iAS Forms Services
HTMLbodyAttrs=
HTMLbeforeForm=
HTMLafterForm=
serverURL=/forms90/l90servlet
codebase=/forms90/java
imageBase=documetBase
width=650
height=500
separateFrame=false
splashScreen=
background=
lookAndFeel=Oracle
colorScheme=teal
logo=
formsMessageListener=
recordFileName=
serverApp=default
archive_jini=f90all_jinit.jar
archive_ie=f90all.cab
archive=f90all.jar,demo90.jar
webUtilArchive=/form90/webutil/webutil.jar,/forms90/webutil/jacob.jar
jinit_classid=clsid:CAFECAFE-0013-0001-0009-ABCDEFABCDEF
jinit_exename=jinit.exe#Version=1,3,1,9
jinit_mimetype=application/x-jinit-applet;version=1.3.1.9
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0
jpi_mimetype=application/x-java-applet;version=1.3
oid_formsid=%OID_FORMSID%
oracle_home=c:\ora9i
[sepwin]
separateFrame=True
lookandfeel=Generic
[runrep]
forms=c:\neerajtyagi\run_rep
separateFrame=True
lookandfeel=Generic
[ienative]
IE=native
[jpi]
baseHTMLJInitiator=basejpi.htm
baseHTMLie=basejpi.htm
[debug]
serverURL=/servlet/l90servlet/debug
default.env
==============
FORMS90_PATH=c:\ora9i\forms90;c:\neerajtyagi\webutil\forms;c:\neerajtyagi;c:\neerajtyagi\webutil\lib
PATH=c:\ora9i\bin;c:\ora9i\jdk\jre\bin\classic
FORMS90=c:\ora9i\forms90
CLASSPATH=c:\ora9i\jlib\debugger.jar;c:\ora9i\jlib\ewt3.jar;c:\ora9i\jlib\share.jar;c:\ora9i\jlib\utj90.jar;c:\neerajtyagi\webutil\lib\webutil.jar;c:\neerajtyagi\webutil\lib\jacob.jar;c:\ora9i\jdk\jre\lib\rt.jar;c:\neerajtyagi\webutil\lib\demo90.jar;c:\ora9i\forms90\java\f90all.jar
WEBUTIL_CONFIG=c:\neerajtyagi\webutil\server\webutil.cfg
form90.conf
===========
# Virtual path mapping for Forms Java jar and class files (codebase)
AliasMatch ^/forms90/java/(..*) "c:\ora9i/forms90/java/$1"
AliasMatch ^/forms90/webutil/(..*) "c:\neerajtyagi/webutil/lib/$1"
# Virtual path for JInitiator downloadable executable and download page
AliasMatch ^/forms90/jinitiator/(..*) "c:\ora9i/jinit/$1"
# Virtual path for runform.htm (used to run a form for testing purposes)
AliasMatch ^/forms90/html/(..*) "c:\ora9i/tools/web90/html/$1"
# Configuration for JServ (if mod_jserv.c is available and not mod_oc4j.c)
<IfModule mod_jserv.c>
# Only configure for JServ if mod_oc4j is NOT available:
<IfModule !mod_oc4j.c>
# Virtual path mapping for FormsServlet and ListenerServlet.
# Purpose: paths to invoke the servlets should be /forms90/f90servlet
# and /forms90/l90servlet respectively.
# We map f90servlet to servlet.if90, and l90servlet to servlet.ifl90.
# The apJServAction directives (below) will then remap those.
AliasMatch ^/forms90/f90servlet(.*) "/servlet.if90"
AliasMatch ^/forms90/l90servlet(.*) "/servlet.ifl90"
ApJServMount /forms90/servlet /forms90
# Let the servlets be called by file extension (e.g /servlet.if90)
ApJServAction .if90 /forms90/servlet/f90servlet
ApJServAction .ifl90 /forms90/servlet/l90servlet
# Prevent access to the Forms Servlets by paths other than
# /forms90/f90servlet and /forms90/l90servlet.
# 1. Prevent access via the .if90 and .ifl90 file extensions:
<LocationMatch ^.*\.if.*90>
order deny,allow
deny from all
</LocationMatch>
# 2. Stop access by class (by paths like
# /forms90/servlet/oracle.forms.servlet.FormsServlet)
<LocationMatch ^/forms90/servlet/oracle\.forms.*>
order deny,allow
deny from all
</LocationMatch>
</IfModule>
</IfModule>
# Config. for OC4J
<IfModule mod_oc4j.c>
Oc4jMount /forms90 OC4J_BI_Forms
Oc4jMount /forms90/f90servlet OC4J_BI_Forms
Oc4jMount /forms90/f90servlet/* OC4J_BI_Forms
Oc4jMount /forms90/l90servlet OC4J_BI_Forms
Oc4jMount /forms90/l90servlet/* OC4J_BI_Forms
</IfModule>

Contact form check boxes will not work on a Tablet

Hi there,
I created a website (Desktop) and a mobile version (Phone). I did not create one for a tablet but have relied on the Desktop version if someone views it on a Tablet.
Here's the thing, I created a contact form with checkboxes. It works great on a desktop (because people check the boxes with their mouse), however, it doesn't work on a Tablet, when you try and check the boxes with your finger.
Help!

Please share the site URL.

Oracle Forms 10G(tabbed canvasses not working the same as in Forms 6i)

Hi everyone,
I have a form which gets called from another form through a list of value. The called form(second form) has a group of tabbed canvases which get displayed depending on the parameters passed from the first form.
The Form is working prefectly fine in Forms 6i but when I converted the same form in to forms 10G it does not seem to work the same way. The tabbed canvasses are not getting displayed. I am manually having to press the execute query to get data displayed in the tabbed canvasses. I checked the parameters that are being passed and they are the same as that in Forms 6i.
Please let me know where my 10G Form is going wrong. Appreciate your help, please send me an email on [email protected]
Thanks

duplicate
Re: Oracle Forms 10G not working as Oracle Forms 6i

CF8 Flash forms nor server monitor not working on authenticated server

Similar Messages

Maybe you are looking for