CF8 install not working
I need some help :).
I get this error after installing coldfusion 8 on redhat
enterprise linux 4.
Starting Macromedia JRun 4.0 (Build 108487), coldfusion server
coldfusion could not be started because it is already running.
the thing is though, it isn't already running. i can't find
anything in the PS list related to coldfusion.
this is the 5th cf8 updagre/install i have done. each time i
have used the same install process. on this server, it fails.
the only difference is this server also runs mysql and cacti.
its a development/admin server. any ideas on resolving this?
Please check the port on which coldfusion 8 is installing is
already in use or not. Do it by using netstat -an and grep the
coldfusion 8 port. Also check the process of coldfusion are they
running. I think that the port is already in use.
Similar Messages
-
Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?
I've done some research on the SQLite database. Whenever Aperture hangs up (like during auto-stack or opening the filter hud) there are thousands of SQLite queries happening. These SQLite queries cause massive file I/O because the database is stored on the disk as 1kb pages. However, the OS is caching the database file; mine's only 12MB. I'm trying to track down some performance numbers for SQLite on osx but having trouble.
It's starting to look like most of the speed problems are in the libraries that Aperture uses instead of the actual Aperture code. Of course, that doesn't completely let the developers off the hook since they choose to use them in the first place.
Oh, and if anyone is curious, the database is completely open to queries using the command line sqlite3 tool. Here's the language reference http://www.sqlite.org/lang.html
Hmm, just found this. Looks like someone else has been playing around in the db http://www.majid.info/mylos/stories/2005/12/01/apertureInternals.html
Dual 1.8 G5 Mac OS X (10.4.3) 1GB RAM, Sony Artisan Monitor, Sony HC-1 HD Camera -
Install not working (ver 10.1, firefox, Win7 64)
Kept downloading and running updater, as admin, no antivirus, on my new 64bit Win7 laptop. Installer always reports success, but the Player remains at ver 10.0.
Eventually downloaded Adobe's uninstaller, ran it, it removed ver 10.0. Rebooted. Ran installer. Open FF, no flash content displayed.
Installer is simply not working.
Please let me manually install this browser plugin. Links to the files please. The installer is crap.Thank you.
The MSI package worked, direct link is:
http://www.adobe.com/go/full_flashplayer_win_pl_msi -
Seamless Install not working for installing Air runtime
hi - is anyone else having this problem today? it was working perfectly for me yesterday but no joy today. The air.swf is still loading in correctly and works fine if you already have the Air runtime installed. But once it tries to install the runtime, you get "A download error occurred. Try to download again?" I've checked it on a couple of different air app sites and its not working anywhere. Anyone else experiencing this or have any suggestions about how to fix it? Thanks
The issue is no longer happening. It continued for most of Wednesday but I haven't experienced the problem since then. Thanks for looking into it. Caitriona
-
10.4.3 Server Install not working on Quad2.5!
A customer purchased a Quad 2.5 and a copy of OSX Server retail. The Quad requires 10.4.5, Apple does not seem to have a new install of Server. (10.4.3 is all I can find) Any suggestions? I am thinking of installing on an older G5, as a stand alone server, and then installing the updates and imaging over to the Quad. Anyone tried this before?
TIA,
Quad 2.5 Mac OS X (10.4.3) SERVEROn the Mac OS X Server installation disk, open the folder Other Installs and then double-click the item MacOSXServerInstall.mpkg inside; this will convert an existing Mac OS X client install to Mac OS X Server, and can be done on a system where Mac OS X Server cannot be installed directly. If this is done on an Intel Mac, the resulting configuration cannot be updated any further and Software Update will not work. More information is available in this article.
(14150) -
Laptop crashing. Purchased new. Had 30 day free trial of CS4. Activated and used that.
My serial # would not work when prompted for it.
Yesterday, chat session helped me to download the software again. Download took 3 hours so chat session ended before install could be completed.
Today I rand the install.
The first time the session ended with a "failed to install" and a list of programs (all of them).
Second and subsequent attempts result in getting to the "Cancel/Install" screen. Message says "Preparing to install" but nothing happens for a significant amount of time.
Please advise. How do I complete the install? I do need to use this software very, very soon.
Thank you!DAnderson which operating system are you using on this laptop? Did you transfer/migrate/copy over your files, folders, and applications to this new computer?
-
NCM 1.5 fresh install - Not working...
Fresh install of NCM 1.5 and launching it is not working. The documentation was not helpful (Getting Started, User Guide, etc.) and did not have any troubleshooting. Where are the logs located? Anyone been through this before?
Basically, I install and update to SP1. After reboot I launch the browser to go to Admin Settings and it says page cannot be displayed Thanks for any help.Hey Michael,
What platform? Solaris, Windows, Redhat?
What are your server specs (CPU, RAM, disk)
Are you using the embedded mySQL database or going with external Oracle or MS SQL Server?
Could you install NCM 1.5 fresh and then try to access the system without installing SP1 first?
You want to see that you're accessible on the base product... Get another account in there besides admin. Maybe add a device or two (but don't go crazy). Once you've validated the base functionality, then an upgrade to SP would be good.
We need to see if this is an issue with NCM 1.5 (FCS) on your platform or with SP1...
On Solaris install logs go to /opt/CWNCM and /opt/CWNCM/server/logs
Should be in similar base directories on Windows.
-Jason Davis
Cisco Advanced Services -
Quick Install not working on Vista - how can I transfer pdb files to/from my Zire 31?
I have been using Hot Sync to transfer contacts, calendar etc, but am unable to transfer my database files (pdb format) to/from my Zire 31, as the QuickInstall program does not work with Vista, and I am not aware of any other method of transferring these files.
Can anyone help?
Post relates to: Zire 31Oops, sorry for the bad link (the must have changed it). For some reason, I can't create a valid link to the article...grr. But you can also get to it by entering Solution ID # 43851 at the bottom of the Palm Knowledgebase.
To move the file from the card to your Zire's memory, use the Copy function in the main Menu. That is, insert the card. Open the menu from the main Launcher (home) screen. Select Copy, and you should be able to select the card as the source.
Hope that helps clarify. Let us know...
Post relates to: Centro (AT&T)
Message Edited by smkranz on 08-26-2008 07:55 AM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android -
Installed new hard drive, mail re-install not working properly...
Hi - I replaced the hard drive in my laptop. Before doing that, I backed up my mail folder and my mail preferences folder to a DVD. Now, after installing OSX on the new hard drive, I've copied the file / folder onto the new drive, but mail isn't working properly. It keeps giving me the "welcome" screen instead of just starting up. It wants me to put in my email addresses, etc. Seems like there's a switch somewhere in the OS that tells it this is the first time its been run. If I go through the process, it still doesn't get my preferences right.
Anyone know what I'm doing wrong?
The files / folders I'm copying are:
- Home > Library > Mail
- Home > Library > Preferences > com.apple.mail.plist
thanks,
daveProblem was not with mail but with Toast and the DVD I burned using it - arggh.
-
Solaris 10 x86 JumpStart install not working
I'm working with several Compaq DL380 servers.
I've installed Solaris 10 x86 3/05 onto DL380 #1, and created a 3GB servername.flar Flash Archive of that system.
I've moved that .flar file to a local web server. I can bring it up in any host's browser on the local subnet, and am able to download the .flar file.
Now, on DL380 #2, I can install Solaris from CDs and open Mozilla and download the 3GB .flar file to /tmp. So, it is reachable. However, if I do a re-install, and this time specify a JumpStart install via HTTP, entering the URL that works, the install program tells me that it can't find a Flash Archive there. I'm entering the URL as http:/10.20.30.40/servername.flar, where 10.20.30.40 is the local web server. This is the same URL that works on other local hosts. (i.e. going to http:/10.20.30.40/ brings up the list of files, and a right-click on servername.flar gives you the option to download it, which I've tried and it does work - it takes a few hours, but it works)
I tried HTTPS first and when I encountered this issue I reconfigured the web server for just HTTP. Then I thought the Flash archive must require a .flar filename extension (I had originally called it servername.archive) so I created a new Flash archive with a .flar extension - servername.flar.
So, the same system, when installed from CDs, can access the web server and download the .flar file, but when re-installing and specifying the same URL it can't find it. I'm giving the DL380 #2 the same IP, same netmask, etc.. when doing the re-install.
I can't think of anything else to try. Any ideas?
thanks!Here is the error output:
# ./add_install_client -i 192.168.1.51 -c sun1:/jumpstart/ -p sun1:/jumpstart/Sysidcfg/Solaris_10-intel/ host2 i86pc
unmount: warning: /tftboot/I86PC.Solaris_10-1 not in mnttab
unmount: /tftpboot/I86PC.Solaris_10-1 no such file or directory
mount: Mount point /tftboot.I86PC.Solaris_10-1 does not exist.
cleaning up preexisting install client "host2"
removing host2 from bootparams
rm: /tftboot/ is a directory
updating /etc/bootparams
ln: cannot create /tftpboot//pxegrub.I86PC.Solaris_10-1: File exists
Create a grub boot flloppy and edit GRUB menu to contain
the following entry:
title Solaris netinstall
rarp
kernel /I86PC.Solaris_10-1/multiboot kernel/unix -B install_media=192.168.1.100:/jumpstart/OS/intel
module /I86PC.Solaris_10-1/x86.miniroot
------------- end ---------------
So, I have tried this with the -i, -e -i+-e, with -s and without.
I have an entry in /etc/ethers and /etc/hosts. However, I don't think it is a FQDN or simular issue. Looks like a script issue.
/tftpboot/ ends up with
boot/
nbp. -> pxegrub.I86PC.Solaris_10-1
pxegrub.I86PC.Solaris_10-1
rm.192.168.1.51
/tftpboot/boot/
grub/
/tftpboot/boot/grub/
menu.1st
# cat menu.1st
default 0
timeout=30
title Solaris_10 jumpstart
kernel /i86PC.Solaris_10-1/multiboot kernel/unix -B install_config=192.168.1.100:/jumpstart,sysid_config=192.168.1.100:/jumpstart/Sysidcfg/Solaris_10-1-intel/,install_media=192.168.1.100:/jumpstart/OS/intel
module /I86PC.Solaris_10-1/x86.miniroot
---- end ----
Thanks for the help.
Aaron -
Trying to get Win 7 64 installed, not working
I am trying to get Win 7 64 installed. I have my dvd (downloaded a authorized version from Microsoft partners group, legal copy, we use it for other installs all the time). I imaged it to a dvd, should be all set.
Both Mac and Win side see the DVD. I go to my bootcamp utility, and go through that process. I am setting it up on my solid state drive that I just put into my CD slot. The DVD drive is now in an external housing hooked up VIA USB.
I then tell it to continue to format my new HD, and start the instal. It restarts, my DVD drive spins up and starts running. Then a gray screen comes up with the Apple in the middle. It then flashes, every now and then.
Can any of you give me some ideas? I have spent hours on this so far.
Thanks,
JohnIf you use Apple Disk Utility to burn the ISO, it won't work properly unless burned at reduced slowest speed 2x. Common and what I would consider "well known" but not documented, not put in the PDF guide in writing.
Sometimes it even boots and installs but bad install and fails. So in a way you were lucky it wouldn't start. -
Adobe Acrobat X Unattended Install not working
I created and Windows bundle to install Acrobat X via a custom msi and I removed the "qn" switch. I used the Acrobat customizer to customize the install, to include unattended install but show progress bar and prompt for reboot. If I run the file on a PC locally it works fine, but the bundle makes the user go through the dialog boxes with all the correct settings already in place. With the /qn it works. I want the users to see the progress. Yes, they're too dumb and/or lazy to use the Zenworks icon to check the progress.
Change /qn to /qb+
On 6/15/2011 3:36 PM, elphantasmo wrote:
>
> I created and Windows bundle to install Acrobat X via a custom msi and I
> removed the "qn" switch. I used the Acrobat customizer to customize the
> install, to include unattended install but show progress bar and prompt
> for reboot. If I run the file on a PC locally it works fine, but the
> bundle makes the user go through the dialog boxes with all the correct
> settings already in place. With the /qn it works. I want the users to
> see the progress. Yes, they're too dumb and/or lazy to use the Zenworks
> icon to check the progress.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
Java install not working ??
I was instructed post install of Yosemite to update my Java Runtime Environment. Now almost daily I am gatting the same notice box that I need to reinstall Java again. I am unsure if Java is evening working in Safari right now as some sites appear to not be working when I have to enter information in boxes to acess an answer via data entered.
It may mean that you need to install the "Apple" version of Java.
(I need to preface this by saying apple has "muddied the water" with regard to java support.)
In previous version of OS X, the Java runtime was installed in /System/Library/Java.
I don't know specifically what is triggering your dialog box but if I were you I'd install the "Apple" version of Java at the following
Java for OS X 2014-001
I think this will take care of the annoying popup.
On my MBP (late 2011) I have the following
(/System/Library/Java/JavaVirtualMachines) 55 >ls -al
total 0
drwxr-xr-x 3 root wheel 102 May 28 17:32 .
drwxr-xr-x 5 root wheel 170 Oct 22 15:25 ..
drwxr-xr-x 3 root wheel 102 May 28 17:32 1.6.0.jdk
(/Library/Java/JavaVirtualMachines) 59 >ls -la
total 0
drwxr-xr-x 5 root wheel 170 Oct 22 12:08 .
drwxrwxr-x 5 root wheel 170 Oct 22 15:25 ..
drwxr-xr-x 3 root wheel 102 Jan 11 2014 jdk1.7.0_45.jdk
drwxr-xr-x 3 root wheel 102 Aug 4 17:11 jdk1.7.0_67.jdk
drwxr-xr-x 3 root wheel 102 Oct 22 12:08 jdk1.7.0_71.jdk -
UPK 3.6.1 silent install not working
Trying to install UPK 3.6.1 in a corporate environment using Windows XP Service Pack 2 and Office 2003.
I ran the install and created a response file as per the installation notes, accepting all the program defaults.
Now when I try to perform a silent installation that uses the setup.iss file, the setup log returns "ResultCode=-3" and the app does not install.
Wondering if anyone can suggest what to try next.
Here's what my setup.iss file looks like:
[InstallShield Silent]
Version=v7.00
File=Response File
[File Transfer]
OverwrittenReadOnly=NoToAll
[{E230DC0A-5C4B-4963-8320-067FF3AF722E}-DlgOrder]
Dlg0={E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdWelcome-0
Count=7
Dlg1={E230DC0A-5C4B-4963-8320-067FF3AF722E}-AskLanguage-0
Dlg2={E230DC0A-5C4B-4963-8320-067FF3AF722E}-AskInstallOption-0
Dlg3={E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdSelectFolder-0
Dlg4={E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdAskDestPath2-0
Dlg5={E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdStartCopy2-0
Dlg6={E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdFinish-0
[{E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdWelcome-0]
Result=1
[{E230DC0A-5C4B-4963-8320-067FF3AF722E}-AskLanguage-0]
DLG_ASKLANGUAGE_LST_LANGUAGE=English
Result=1
[{E230DC0A-5C4B-4963-8320-067FF3AF722E}-AskInstallOption-0]
DLG_ASKINSTALLOPTION_LST_OPTIONS=Client
Result=1
[{E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdSelectFolder-0]
szFolder=User Productivity Kit Client
Result=1
[{E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdAskDestPath2-0]
szDir=C:\Program Files\User Productivity Kit\UPK Developer 36Client
Result=1
[{E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdStartCopy2-0]
Result=1
[Application]
Name=User Productivity Kit
Version=3.6.1
Company=Oracle
Lang=0009
[{E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdFinish-0]
Result=1
bOpt1=0
bOpt2=0Hi Jason,
A couple questions:
1. Have you tried installing on more than one machine, and is this happening always, or just in some instances?
2. Are you trying to perform the silent install on other XP SP2 machines, or are these different OSes? The response file should be made for identical OSes.
The ResultCode=-3 is saying that "Required data not found in the Setup.iss file." I have a feeling that the environment where you recorded the response file had all the necessary third party applications installed, so that dialog was skipped during that "recorded" installation. It would have been a dialog after you selected the installation option (it's not listed in the dialog list in your response file, so that's why I'm figuring that machine was up to date).
So, when you installed on the next machine with the response file, the setup.exe was now looking for this particular dialog in the response file, but it's not there. For that response file to work, you need to make sure the environment where you are using it has all the third party apps installed before running the silent install. If you look at the main installer location (where the setup.exe is) there is a "Third Party Files" subfolder, with all the third party apps UPK uses. Install those on these machines before running the silent installation.
If any of these are not already installed, install them:
.NET Framework 3.5 (in DOTNET folder)
MS Visual C++ 2008 Runtime Library (in MS_Visual_C++_2008_Redist folder)
MSXML 4.0 (in MSXML_4.0 folder)
MS Primary Interop Assemblies 2005 (in Primary_Interoperability_Assemblies_2005 folder)
Web Service Enhancements 3.0 (in Web_Services_Enhancements folder)
Hope this helps,
Matt -
Why is the last part of the Word Press install not working?
I am installing Word Press to work in Dreamweaver. I have installed MAMP and everything is working fine, I assume. The location of the files are /applications/MAMP/htdocs/wp-content/themes/twentyten.
I have installed PHP/MySql on my machine and have set up the wordpress database as instructed. The last part of the process has me bogged down. In following step one of the process, I get a blank screen. Here's the url: http://localhost/wp-admin/install.php and the instructions to complete the process.
With the WordPress files copied to the correct location in the htdocs folder, the web server installed, and a database created, open a browser and browse to http://localhost/wp-admin/install.php.
A screen telling you to create a configuration file will appear. Click the Create a Configuration File button.
Click the Let’s Go button to go to a page that allows you to enter your database information.
Type your database name, wordpress.
Type your MySQL user name and password (usually the user name and password are both admin, unless you changed them in the database).
For the Database Host type localhost.
Click Submit
Can anyone help?
Thank for your help,
GWalton55I'm stuck installing virtualhosts in DW and using Wordpress templates, but I may be a few steps further than you are, so I'll try to help. I'm also using Windows, so who knows?
I'm assuming you are not using a virtual host, just a local host; therefore, I went to the section that has instructions for the steps you are on in David Powers' "Adobe Dreamweaver CS5 with PHP: Training from the Source" and right after he has you launch the browser and open "wordpress/wp-admin/install.php" in "your [site name here] site." He goes on to write:
The URL depends on how you set up your testing environment:
Virutal host: http://[site name here]/wordpress/wp-admin/install.php
Localhost: http://localhost/[site name here]/wordpress/wp-admin/install.php
NOTE: if you are using the MAMP default ports on a Mac, add :8888 after [site name here] for a virual host, or after a localhost.
So perhaps that's what you're missing, I really don't know.
Good luck!
Maybe you are looking for
-
Installation problem in ubuntu 8.04
Hi All, I have installed apex_3.1.2, 6 months back on Windows Vista OS and everything work perfectly, obviously it was on Oracle 10g XE. Steps are as follows:- 1. cd apex\apex3.1.2\apex 2. sqlplus / as sysdba 3. CREATE TABLESPACE APEX DATAFILE 'C:\OR
-
This just happened without reason. Not sure what other information I can provide.
-
Dlls working fine in LabVIEW 6.1 dont do so in LabVIEW 7.0
We are using the following dlls from Microstar Labs for one of our Microstar DSP boards : a. DAPIO32.dll : DAPcell client I/O library b. Diostub.dll We use these in the main Vi called DAPControl.vi We currently run this VI in LV 6.1 - its working fin
-
HT4623 my iphone 3gs keeps on resetting during update of ios 6
my iphone keeps resetting it self. i was updating the ios 6 on my iphone 3gs and now it just keeps on resetting. i connected it to my imac but still no use. ive removed my sim card but still nothing. HELP Urgent!
-
Hello, i have abit of a problem with my queries 1) Sorting: Select all employees time. SQL> select * from employees 2 group by employee_name; select * from employees ERROR at line 1: ORA-00979: not a GROUP BY expression This one I want to group 2) Gr