CF9 working with Word documents???

Hi, everyone.
Yet one more question on top of the one's I've started.
CF9: can it EASILY work with .doc(x) files?? I need to grab all content from Word files (including meta info and whatnot), insert into a CF variable/object, make minor changes, and then resave it as a .doc(x) file.
How difficult would this be?
Thank you,
^_^

Okay.. didn't find what I was looking for on Ben's site (all I could find was the POI for Excel), but I did find something on Raymond's site. getAllTheTexts. But I'm not sure this will do what I need it to do. I'll give it a shot and report back.
^_^

Similar Messages

What is the best way to work with Word documents in The InDesign CS4???

I work in Microsoft Word 2007 and all my documents have *.doc format.
What is the best way to work with Word documents in InDesign CS4???
David Blatner says to avoid copying and pasting text from Word instead of placing it (Ctrl+D).
How about pasting RTF or Text Document???
I want to make book's layout in ID CS4 and its main feature is that there is the left page with text and the right - with graphics.
So, as I understand to place the text on each page I must create for example 70 Word documents and place each item on 70 left pages???
It loks like wasting time. I sthere another way of making such layout??? What kind????

It's best to place any text.
You can have all of your text in one file and use auto-flow to add threaded text frames and pages as required (Hold down the Shift key when you click the loaded text cursor), but it's a little non-standard to have the thread only on one side of the spread from the auto-flow perspective, so you'll have to set up properly.
This is one case where a master text frame will work to your advantage. On your master page spread, add a text frame to the left page, but not to the right (or at least not threaded to one on the right -- for some other project you might actually want two independent text threads). Hold the loaded cursor over a frame on the left side of a document page and auto-flow. ID will add new spreads as necessary, but only put the text on the left side.
Peter

Best way to work with Word documents on Mac?

Just bought a Mac Pro, tired of the faults of MS/Windows. BUT I work a lot with Word documents, and have to keep doing so to interact with colleagues, I understand there are two possible ways - either install on my Mac also a Windows, and work in original Words, or use iWork.
What is the experience - is iWork fully compatible with Words? Interface problems when sending/editing back and forth? Grateful for opinions and tips!

I too was worried about Word docs when I transitioned over to Pages. I have not found any Word document so far that Pages could not open, that said, most of the time you will get a notice saying that some errors have occurred in the process. Most of these seem to be related to fonts, but if you have tables and spreadsheet segments, they can come out looking scrambled in Pages.
I can't comment on the export of Word docs and how they open on PCs but I do know that the PDF exporter from Pages is great (so far).
In fact Pages is great all around for simplicity, ease of use and dependability.
iWork: <$100
Office: >$350
No Contest IMHO

Best way to work with Word documents?

Hi! New Mac user, bought a Mac Pro, tired of Windows many faults. I work a lot with texts, documents, and I'm used to Word. And working with colleagues in a Word world..
What is the experience of compatibility? Is iWork functioning good enough for receiving, changing/editing and returning documents, or should one have Windows installed in parallell, with the original Word programme? And same question about presentations - PowerPoint versus/interchangeable with Keynote?

OpenOffice 3.1
Virtual environment for Windows, but I wouldn't touch Parallels. Fusion or Sun's VB.
iWork '09
http://discussions.apple.com/category.jspa?categoryID=253
http://www.apple.com/support/iwork/

Working with Word Documents in Oracle8iDB

Hi, i'm trying to develop an application that save the text that I handle in Word Format and then save this file to my database. I already readed the documentation and tried some examples but I can't make it work. My Table name is TEXT with the following structure:
ID NUMBER(8)
DOCUMENT BLOB
Anybody that can help me with the code to insert a Word document in the document field??
Thanks
Leo

If what you want to do is to save your document as Word format and then store it in your database, there are two ways to do it.
1. Use internet File System
When you save your Word file, simply save it using internet File System. This might be the easiest way.
2. Use SQL*Loader
Read http://otn.oracle.com/sample_code/products/intermedia/htdocs/avi_bulk_loading.html for more details.

There is a way to work with word documents?

hi everybody, i have a new macbook air 13, and pages is install on mac. i am working with someone who use microsoft word, the problem is with the graphics. i receive text o perfect condition but when he send me some graphics problems appear, can anybody give me some advise on how to solve this problem? maybe an app or if i have to modify something on the pages app. Thanks!

Try LibreOffice [free}.
Pages is not 100% interchangeable with Word.
Peter

Working with Word documents

I've created a document in Pages which has images, then exported to Word format, then opened the .doc file up in Pages. The images aren't in the right places. What am I doing wrong?
I've also opened it in Word and it looks ok there, but I really want to be able to use Pages exclusively and not have to use Word at all!

karenr wrote:
I've created a document in Pages which has images, then exported to Word format, then opened the .doc file up in Pages. The images aren't in the right places. What am I doing wrong?
What does "aren't in the right places" mean? We can't see what you are talking about.
I've also opened it in Word and it looks ok there, but I really want to be able to use Pages exclusively and not have to use Word at all!
Pages does not open or save to word files 100% accurately, so don't expect a perfect match. The question is how much compatibility do you need? If it is 100% then you will have to continue using Word. If it is less then Pages might be sufficient, or OpenOffice or Bean or iTextExpress all of which are free.
Peter

Acrobat 9 is not working with Word 2010: why?

I cannot get Acrobat 9 to make a PDF document from Word documents made with Word 2010, either by 'Creat from file' in Acrobat or by using Acrobat PDF Maker in Word. This has happened before when I first used Word 2001, but a later version of Acrobat solved that problem. Is the same sort of thing happening with Office 2010? If not, what can I do.

print to the Adobe PDF printer if all else fails
Thank you for that; it's nice to know that Acrobat will eventually work with Word 14, though not yet. I've tried printing with the Adobe PDF printer, and it doesn't use the proper fonts either, so I'd be better saving as a PDF document from Word. But perhaps I'll get better results with saving to PS first.
Meanwhile, I'll treat Adobe's claim that with Acrobat 9 you can make PDF from any document with a large pinch of salt.

Has it gotten easier to work with Word?

Hi!
I'm thinking about buying iWorks '08 but I don't know if I should wait until Office 2008 hits the stores. I have used Pages, but switched to Office 2004 because every time I got a .doc file I had to open it (if Pages could) save it as a Pages file if I needed to work on it and export it again when it was ready to be send back. This is not very smart if you share documents a lot which I do.
So what I want to know is, can I in Pages '08 open a .doc/.docx and save it as that? I will I have to go through the annoying import - save - export thing again?
Thanks

Rune,
Sorry to say that Pages 3 isn't any more adept at working with Word docs as previous versions of Pages were. You'll still have to export the file, rather than just saving it.
-Dennis

OTM can not open attachment with Word Document(*.docx)

With more and more use of Word Document(*.docx) (version 2007). OTM (Oracle Test Manager) can create an attachment with it, but can not open attachment with Word Document(*.docx). Is this a problem for anyone else? Any wok around?
Thanks
Katherine

I am using OTM version 9.2 and the Word document (*.docx) attachment can be opened in this.
For being able to open a docx file, try to attach an word document from the file option in the Requirements, Test or Issue tabs in OTM , once you upload the file, please check if location is " in Database" Else click update DB and upload the document.
Once the attachment is attached to the Attachment section in the right pane, clicking on the attachment will open the *.docx document.
This has worked for me.
Hope this helps.

Export pdf doasn´t work with some documents pdf... guive an error?

Why EXPORT PDF ddasn´t translate to WORD in many documents..... guive me an error
Please guivme a solution
Regards
Jose Antonio Resco

De: florencejohn
Enviado el: miércoles, 3 de diciembre de 2014 10:44
Para: José Antonio Resco
Asunto: Export pdf doasn´t work with some documents pdf... guive an error?
Export pdf doasn´t work with some documents pdf... guive an error?
created by florencejohn <https://forums.adobe.com/people/florencejohn> in Adobe Acrobat.com Services - View the full discussion <https://forums.adobe.com/message/6981587#6981587>
What I must do???
Hi jose antonio resco <https://forums.adobe.com/people/joseantonioresco> ,
Please let me know the exact workflow you are following when you get this error.
Are you trying to convert from within Reader or from Browser? BROWSER
If from Reader then make sure you are signed in within Reader, Also try updating Reader to the latest v11.0.09 and check.
If from browser, please let me know which browser you are using and its version? GOOGEL CHRONE and MOZILA
Have you checked with a different browser if possible?yes
Regards,
Florence
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6981587#6981587 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6981587#6981587
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Acrobat.com Services by email <mailto:[email protected]com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=48 70>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
El software de antivirus Avast ha analizado este correo electrónico en busca de virus.
http://www.avast.com

RoboHelp for Word installed from RoboHelp 10 won't work with Word 2010

I have a Help project created in RoboHelp for Word 8. I recently upgraded from Word 2007 to Word 2010 and discovered that RH8 for Word won't work with Word 2010. So I purchased RoboHelp 10 and have installed RoboHelp for Word from it. Alas, RH for Word STILL won't work with Word 2010. When I try to open my project, I get this message:
Before I bought RH10, I live-chatted with an Adobe sales person who assured me it was compatible with Word 2010.
BTW, I tried to roll back to Word 2007, but I was getting weird behavior running Word, so I have reinstalled Word 2010 and want to stay there.
Any ideas?

I have just installed Rh10 for Word on a new machine and initially I got this message.
I wonder if you have followed those instuctions? I changed the setting to Enable All.
The other possibility is what do you have set for the default version? If it is 2007 and that no longer exists on your machine, then Rh will not be able to proceed. The dropdown should show 2010
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

"Restore last view settings when reopening documents" option not working with all documents

Said option (found under Edit/Preferences, category Documents), which works like an automatic bookmark in that it takes you back to the same place you were at when you last closed a document, is very useful, but apparently doesn't work with *all* documents.
- Does anyone know what determines whether a given document works with this option or not?
- Is this by design or a bug? A matter of PDF format version?
- Is there a way to work around the problem?
I've compared two documents, only one of which works with the option, to determine what the relevant difference may be, and found two suspects (under File/Properties): the PDF version (1.5 in the document that works, 1.4 in the one that doesn't), and 'Fast Web View' ('yes' in the document that works, 'no' in the one that doesn't).
Thanks,
Michael

This seems to be a problem with some PDF files.
Suggested workaround: If the PDF you have allows "Save As", then try save-as to a new file. The "Restore last view settings when reopening documents" option should then work as expected (in the new file).
(Original post: Restore last view setting not working in version XI)

Recently upgraded to Mavericks... was working with Pages documents from previous OS ... Pages is now frozen and I don't dare force quit and loose my old documents.

Recently upgraded to Mavericks... was working with Pages documents created with previous OS ... Pages is now frozen and I don't dare force quit and loose my old documents. How can I "thaw".... unfreeze Pages? Have several pages windows open that I was working on.

I also had this problem after I installed Mavericks: Pages files freezing at close, need to force quit.
Workaround: when saving any document created with an earlier version of Pages, be sure to untick the "include preview in document".
For some reason, this resolves the problem.
BTW "loose" is not a verb. You probably mean "lose".

Working with StarrOffice Documents

Anybody knows how can i work with starrOffice documents in java? (open, edit,...)

Just unzip and check out the various files in a text editor. It's ordinary XML so you can use your favorite XML parser to parse it.
- Marcus Sundman

CF9 working with Word documents???

Similar Messages

Maybe you are looking for