CFC Generator doesn't create anything?

Ok, this is baffeling me! We have Coldfusion Builder installed as a plugin to FlashBuilder. I have the CFC generator extension installed. When I right-click on a table in my RDS view and select "Create CFC" It prompts me for a location. Location relative to what??? I've tried a couple of different times with what seemed like appropriate location paths but nothing gets generated. I get no errors and no files open like they did in FlexBuilder 3. That extension was MUCH better!
Also, in the Extensions panel the CFC Generator still shows that is a Beta version. Is there a fully release and tested version? Any help is greatly appreciated.

As I mentioned earlier, CFC generator is just an extension that is based on extension framework provided by CF Builder. There are some interesting CFC generators that CF community folks have written that you can install in CF builder and use.
Check http://www.riaforge.org/index.cfm?event=page.category&id=14
Check http://help.adobe.com/en_US/ColdFusionBuilder/Using/WSf01dbd23413dda0ea6b27fe1213a53315f-7 fd8.html on information on how to install an extension. Extension is just a zip file that needs to be installed in CFB.

Similar Messages

I can create an action but the droplet doesn't do anything when I drop a file on it. I am running Adobe Photoshop CC 2014 on a 64bit Windows7 PC.

I can create an action but the droplet doesn't do anything when I drop a file on it. I am running Adobe Photoshop CC 2014 on a 64 bit Windows7 PC. I exactly followed the steps on a youtube video on how to create an action and how to create a droplet.

Thanks for the reply, I tried that but i wasn't able to get it to work. I also tried to see if l could using the
function functionName()
and I was still unable to.
Silkrooster wrote:
I haven't tried it yet, so i could be way off. But since you assigned it to a variable I would say it won't do anything until to call that variable. I would assume there must be a show command or similar that is needed for it to display.
My experience is with actionscript and javascript but still I lean towards basic. I don't feel comfortable enough to say I am any higher yet as more experience is needed in my opinion.
So feel free to take my advice with a grain of salt.

Adobe Reader XI (11.0.08) doesn't create thumbnail (bitmap) using Microsoft Interface IExtractImage -- Extract on Windows Server 2008 R2, when exe to generate thumbnail is launched from Windows service.

Adobe Reader XI (11.0.08) doesn't create thumbnail (bitmap) using Microsoft Interface IExtractImage --> Extract on Windows Server 2008 R2, when exe to generate thumbnail is launched from Windows service.
But if exe is launched as standalone, then interface IExtractImage --> Extract, gives Bitmap to generate thumbnail of PDF document.
Above problem occurs only for PDF documents, if we tried same with other software like CAD -CATIA it works without any problem.
Is there any security concerns form PDF side, which doesn't allow to generate Bitmaps, if exe to generate it is launched form Windows service.

It might be deliberate, Acrobat and Reader software is not intended to run in a service environment.

Hi, I am having trouble using the smooth tool on a logo that I created. I have watched tutorials and something isn't working for me. When trace with the smooth the line just disappears and doesn't smooth anything out. Please help.

Hi, I am having trouble using the smooth tool on a logo that I created. I have watched tutorials and something isn't working for me. When trace with the smooth the line just disappears and doesn't smooth anything out. Please help.

Sorry, that's Monika with a k
On Tue, Nov 18, 2014 at 2:26 PM, Monika Gause <[email protected]>

ORM CFC Generator error

Hi
I'm trying to get Coldfusion Builder's ORM CFC Generator to build my cfcs but when I click the Generate button after setting my table relationships I get the following error:
Error : Event handler exception.. coldfusion.runtime.CfJspPage$ParameterNotFoundException: The required parameter SESSION.ORMTABLES was not provided.
I have an Application.cfc with sessionManagement=true, name is set, ormenabled is true and ormsettings specs a database.
What am I missing?
Thanks,
Rich

... and this is why I'm leaving Coldfusion development:
Vaibhav: Hello! Welcome to Adobe.
Vaibhav: I have received your query. Please allow me a moment to verify your account and to review the details of your request.
Rich Leach: sure sounds good.
Vaibhav: Let me connect you to our Cold Fusion team.
Please wait while I transfer the chat to the appropriate group.
You are now chatting with 'Sandip'
Rich Leach: hi Sandip
Sandip: Is there anything else I may assist you with today?
Sandip: I am sorry
Sandip: Hi Rich.
Sandip: How are you doing?
Rich Leach: a little frustrated with this CF Builder 3 not working....
Sandip: Okay.
Sandip:
Sandip: Rich, could you please explain me the issue a bit more?
Rich Leach: what would you like to know?
Rich Leach: When I'm working in CFBuilder 3....
Rich Leach: I open the RDS dataview
Rich Leach: drill down into a database, then a table....
Rich Leach: and right click on a table I can select Create ORM CFC from the Adobe CFC Generator option.
Sandip: Please allow me a moment.
Rich Leach: I see my tables in the utility and when I click the Generate button I get the error message:
Rich Leach: Error : Event handler exception.. coldfusion.runtime.CfJspPage$ParameterNotFoundException: The required parameter SESSION.ORMTABLES was not provided.
Sandip: Rich, do you have a support contract with Adobe?
Rich Leach: No, I just purchased CFBuilder 3 a few weeks ago
Sandip: Rich, we would need a support contract for this issue.
Rich Leach: Why? The product is not working as you advertised it to
Sandip: That is because it is not an installation or a migration issue.
Rich Leach: But the application is throwing a low level server error, how can I be expected to fix it on my own without your help?
Sandip: We are here to assist you but for that we would need a support contract.
Rich Leach: I would like a refund please. How do I go about getting a refund?
Rich Leach: I'm just curious. CFBuilder 3 cost me about $300. How much would you charge me for a support contract?
Sandip: Rich, this is not an installation, migration or connector issue and support on this issues are free of cost but for ORM issue we would need a support contract.
Sandip: You can go for a single incident contract which be around $249 + tax which would be on a best support basis.
Rich Leach: The product only cost $299. Are you seeing the problem here? And you do understand I'm not asking for Coldfusion support, I'm asking for support with Coldfusion Builder 3. Do you understand?
Sandip: Yes, I do understand but this is the only way to go forward. I am sorry.
Rich Leach: I'm sorry too. Thanks for your help.
Sandip: Is there anything else I may assist you with today?
Rich Leach: How about that refund? How do I get a refund?
Your chat transcript will be sent to [email protected] at the end of your chat.
Sandip: Could you please let me know the order id?
Rich Leach: I'll have to look it up, give me a second....
Sandip: Sure.
Rich Leach: My order id is AD0nnnn
Sandip: Please allow me a moment to check.
Sandip: Rich I see that you have bought the product on 07/08/2014, am I right/
Rich Leach: Yes, for $109 (I forgot I got the upgrade). I can't justify paying over twice as much for a support contract
Sandip: Rich, refund for an order can only be processed within 30 days of purchase.
Rich Leach: ok thank you for your help.

Orm generator work but not 'vanilla' cfc generator

I just reinstalled the cfc generator and can generate the orm cfc's without problems but get nothing if I select 'create CFC' instead of 'create ORM CFC' - I need a non-orm solution for a curren project - is anyone else having this problem?
Thanks
Susan

Thanks so much!
Reading the bolt.log did the trick - I had used an Access database instead of MySQL and the error reads that the option doesn't work for Access. There is no problem with MySQL. Is there any documentation for CFBuilder beyond the help file?
Thanks
Susan
"Error","web-49","09/16/09","12:06:54","SAMPLE CFC GENERATOR","Error Executing Database Query."
"Error","web-49","09/16/09","12:06:54","SAMPLE CFC GENERATOR","[Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver]Optional feature not implemented "

Schema tool simply doesn't output anything

In what situations does the ant schematool not output anything and simply
let the ant script continue? I have the following piece of ant script:
<antcall target="compile"/>
<taskdef name="schematool"
classname="com.solarmetric.modules.integration.ant.SchemaToolTask"
classpathref="jarpath"/>
<schematool action="refresh" ignoreErrors="true">
<config ConnectionDriverName="${project.db.driver}"
ConnectionUserName="${project.db.uid}"
ConnectionPassword="${project.db.pwd}" ConnectionURL="${project.db.url}"
LicenseKey="LICENSE KEY CENSORED" SynchronizeSchema="false"/>
<fileset dir="${project.build.outputDir}">
<include name="**/*.jdo" />
</fileset>
<classpath>
<path refid="jarpath"/>
<pathelement location="${project.build.outputDir}"/>
</classpath>
</schematool>
When I change one of the ${project} settings to a non-existent property the
tool starts screaming hell and murder that it can't connect to the database.
However in normal execution the schematool doesn't do anything. It doesn't
even tell me it's refreshing anything.
Does this mean that it somehow can't find my jdo-files? I've passed exactly
the same fileset and classpath into jdoc and it CAN find my .jdo's and
classes.
Love to hear from ya,
Martin van Dijken

In article <[email protected]>, Martin van Dijken wrote:
The night must have done my computer some good or something.When all else fails, trying again in the morning is always a good
solutin :)
All of a sudden
the tables are being created. I did have my logging for schema creation a
little too quiet so it didn't output anything. Maybe in fidgeting with
log4j.properties I corrected something else as well.
Anyway problem solved,
Thanks
"Marc Prud'hommeaux" <[email protected]> wrote in message
news:[email protected]...
Martin-
Does this mean that it somehow can't find my jdo-files? I've passed
exactly
the same fileset and classpath into jdoc and it CAN find my .jdo's and
classes.Most probably that is what is happening.
I hate to second-guess, but are you sure the fileset for the jdoc and
schematool tasks are exactly the same?
Also, if you enable trace-level logging for all of Kodo's categories, do
you see any output at all from the target?
In article <[email protected]>, Martin van Dijken wrote:
In what situations does the ant schematool not output anything and
simply
let the ant script continue? I have the following piece of ant script:
<antcall target="compile"/>
<taskdef name="schematool"
classname="com.solarmetric.modules.integration.ant.SchemaToolTask"
classpathref="jarpath"/>
<schematool action="refresh" ignoreErrors="true">
<config ConnectionDriverName="${project.db.driver}"
ConnectionUserName="${project.db.uid}"
ConnectionPassword="${project.db.pwd}" ConnectionURL="${project.db.url}"
LicenseKey="LICENSE KEY CENSORED" SynchronizeSchema="false"/>
<fileset dir="${project.build.outputDir}">
<include name="**/*.jdo" />
</fileset>
<classpath>
<path refid="jarpath"/>
<pathelement location="${project.build.outputDir}"/>
</classpath>
</schematool>
When I change one of the ${project} settings to a non-existent propertythe
tool starts screaming hell and murder that it can't connect to thedatabase.
However in normal execution the schematool doesn't do anything. Itdoesn't
even tell me it's refreshing anything.
Does this mean that it somehow can't find my jdo-files? I've passedexactly
the same fileset and classpath into jdoc and it CAN find my .jdo's and
classes.
Love to hear from ya,
Martin van Dijken
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com

Build doesn't create WSP package.

Hi,
Any ideas what to check when VS2012 build doesn't create WSP package? No errors received while building. Publish works normally.
99% sure that at some point simply building a solution created WSP package to output folder.

Hi,
By design, if you build the SharePoint project, it just generate
.dll and .pdb file in the output folder.
In Visual Studio 2010 there is a special option "Package" in context menu of program project to generate
.wsp file.
Nowadays, there is no such in Visual Studio 2012, but we can use Publish
instead.
Here is another solution that we can create a Solution Package for a single SharePoint 2013 project.
http://visualstudiogallery.msdn.microsoft.com/b736142a-525d-44c1-b243-b45d9c0e42f3
More information:
http://networkedblogs.com/A85Gc
Best Regards
Dennis Guo
TechNet Community Support

Right-click add track to playlist doesn't do anything

About 90% of the time (iTunes 12) trying to add tracks to existing playlists via right-click doesn't do anything. No error message, but the track just doesn't get added. I think this mostly happens when adding multiple tracks at once, not sure. Clicking on the little circle and adding to playlist that way, on the other hand, seems to work for the one track but ignores all the other tracks you have selected and only adds that one track.
Is this a known bug? Does it only happen to me?
I have to resort to always selecting all the tracks I want to add, then choose 'create new playlist from selection'. This always works. Then I have to copy (drag-and-drop) the entries from that new playlist to the playlist I actually wanted the tracks in, and then delete the new unnecessary playlist. It's an unnecessary amount of work.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Adobe CFC Generator not showing up Coldfusion beta 2

Im running the new coldfusion beta 2 connecting to a remote server.
For some reason when i right click on the a table in the RDS Dataview Im not getting the "Adobe CFC Generator" option.
Any one else having the same problem?

It shows up on my localhost running mySQL and CF9 and OS X 10.5.8
however the generator FAILs.
The generator opens a window with...
a title of: "Adobe CFC Generator"
a header with: "Create ORM CFC"
a body of...
Enter location for CFC* [__________] (Browse)
Script CFC? [_]
a footer with.... (Cancel) ( ok )
After setting the directory it opens a new window with...
a title of: "Adobe CFC Generator"
a header with: "Create ORM CFC"
an empty body area -- all white --
a footer with... ( Close )
Cheers,
-Truce

Udev doesn't create sd* devices in /dev

Today I updated udev package and after it I can't start my system. The booting stops with the message about check filesystem manually. When I tried to do this I couldn't find any sd* devices in /dev. Kernel detects all drives and correspond files presents in /sys/block directory. I can make device files with mknod command using information from /sys.
How do I make udev to create device files in /dev?
Sorry for bad English.

I just found one more interesting thing. When I test udev rules by "udevadm test /block/sdb/sdb2" udev creates correct device files - /dev/disk/ dev/block and /dev/sd*. But at daemon mode - udevd --daemon it doesn't do anything!
Does anybody know how to fix this?

URGENT: when COMMIT doesn't save anything

Hello friends at www.oracle.com ,
I'm having a problem: a Forms program that has a COMMIT instruction before calling a report but, when we look at the report, it doesn't show any data that should be committed (INSERTed, in this case).
Looking at the table through Worksheet shows that COMMIT hasn't saved data, although Forms doesn't show any error that could be happening. Even pressing SHIFT+F1 keys to see any Oracle Error doesn't show anything.
If you have any suggestion about what could be wrong, please tell me. The fact is: although a COMMIT is used before calling the report, nothing happens and Forms doesn't give any feedback - error message, etc.
Thanks, and best regards,
Franklin Gongalves Jr.

Run with a database trace on
EG FORMS_DDL('ALTER SESSION SET SQL_TRACE = TRUE');
Look at the trace file (generated on the server side, so you may need to talk to your DBA) and see if the INSERTs and COMMIT ae being sent to the database, and if any errors are coming back.
I seem to recall, Forms has a problem dealing with the failure of deferred constraints. It thinks the INSERT (or UPDATE) has already been applied, when the server has rolled it back.

CFC generator not working - CFB beta 3

I can't get the CFC Generator to work in Beta 3. I didn't find a new extension so I imported the one from the previous beta. The options appear and produce the message box asking where to put the cfc's but nothing is generated.
Can someone help?
Thanks
Susan G.

Update - I uninstalled and re-installed again - then unistalled the generator that was there and re-installed the Adobe CFC Generator.zip that I had downloaded last Sept. (I couldn't find any newer extensions on the download site.) Now the vanilla CFC generator works but the ORM still doesn't work and I don't get the option for script version.
Susan

Hi I got an email from itunes saying that my pre order was ready and when I click on the link from my ipad it takes me to the itunes store app and then it doesn't do anything help with this please.

Hi I got an email from itunes saying that my pre order was ready and when I click on the link from my ipad it takes me to the itunes store app and then it doesn't do anything help with this please .
<Link Edited By Host>

Thanks for your advice, I went to the apple shop today for a face to face meeting with a tech and he checked everything and could not figure out why I was having this problem so we decided to give up on that account and create a whole new one for me using a different email address.
Now I can download apps on both my iPhone and ipad2.
If anyone is reading this in Brisbane Australia go to the Chermside apple shop and ask for Wade. He was fantastic!
Jan

Coldfusion builder ORM CFC Generator error

I have been trying to cretae cfc code for flash builder in coldfusion builder, i have install the adobe ORM CFC Generator in preferences and have it set up on local host, the local host is created on a user directory, cold fusion server and builder all work well and i can also read databse tables from an external mysql server.
However when i to use the RDS Dataview and when I right click and table to create an ORM CFC .. it asks me for the CFC location .. I choose a folder that's in my project and a new window comes up with an error the requested url/adobe CFC Generator/"/handlers/ormCFCGenerator.cfm was not found on this server.
Please could some one help
CJ

I have been trying to cretae cfc code for flash builder in coldfusion builder, i have install the adobe ORM CFC Generator in preferences and have it set up on local host, the local host is created on a user directory, cold fusion server and builder all work well and i can also read databse tables from an external mysql server.
However when i to use the RDS Dataview and when I right click and table to create an ORM CFC .. it asks me for the CFC location .. I choose a folder that's in my project and a new window comes up with an error the requested url/adobe CFC Generator/"/handlers/ormCFCGenerator.cfm was not found on this server.
Please could some one help
CJ

CFC Generator doesn't create anything?

Similar Messages

Maybe you are looking for