CFChart fails on fresh install
We recently started the move from our old CF servers to the
new CF8, and have been having some problems getting cfchart to
display. No charts will display, unless I save them down to a file
(manually) and link to that. After wrestling around with it and not
getting anywhere, I tried installing a developer edition on my
workstation to see if I could replicate the issue.
With a basic single server developer installation under IIS,
my cfcharting problems remained. With a fresh install, every flash
graph I try displays a white rectangle, but the image graphs show
up, I can still save down the generated graph to a file and display
that ok. The files do appear in the c:\Coldfusion8\charting\cache
directory when the chart page is hit.
Is there some path that's munged on the install or that needs
to be tweaked for charting to work? Is there an incompatibility
with IIS6's default settings?
Attached is my cfchart test script.
Thanks!
-Drew
Windows 7 x64 all updates
Just doublechecking. Does that include the recent chkdsk hotfixes?
[The Chkdsk.exe program does not start correctly on a Windows 7-based computer|http://support.microsoft.com/kb/975778]
Similar Messages
-
[SOLVED] GRUB Failing on Fresh Install
I'm trying to do a fresh install on a computer with an existing 20GB windows installation. I have done this for years with no problem, but now grub-mkconfig is returning errors (here's a photo - http://imgur.com/8Az66wx), and if I go ahead with grub-install afterwards, I find that there's no Windows boot option and trying to boot Linux also yields errors (see this photo - http://imgur.com/umfMznr). I've tried twice now with the same results. Any ideas what's going on? Thanks.
Last edited by tony5429 (2013-12-14 00:41:59)Actually I did search a bit and found a lot of discussion about the error in cases where people were trying to use an LVM, and situations which returned errors but still allowed them to boot. My case is a bit different as I'm just using standard hard drive partitions, and Linux is not booting.
-
CHKDSK fails on fresh install of Windows 7 x64 on mid-2009 MBP with SSD
There was an earlier post about this that has been archived prematurely that I will reproduce below. The main issue is a flaw in the Windows 7 x64 CHKDSK of the SSD drive in the mid-2009 MBP= 5,2. With fresh OSX installs, bootcamp 3.1, Windows 7 x64 all updates, the CHKDSK operation checks files at about 1 per second in stage 4 of 5, verifying file data.
Moderators: please leave this open until it is actually resolved.
Earlier posts:
Panajev
Posts: 4
From: ITALY
Registered: Oct 14, 2009
Windows 7 x64, MacBook Pro, frequent CHKDSK after HDD firmware update
Posted: Nov 2, 2009 6:45 AM
Hello, I have been having filesystem problems on my Windows 7 partition since the HDD related firmware update (the latest Performance update) was released and installed onto this mid 2009 MacBook Pro.
The HDD is a 500 GB 7200 RPM model, but it never gave me any troubles under OS X before the "fix" and I know other users had intermittent problems with the HDD on their MacBook Pro's related to the HDD making noises and pausing.
The fix was released, I installed it and I started seeing my first problem in Windows 7 x64 a few days after... I cleanly shut the OS down, but when I booted it back it asked me to perform a coherency check to the Filesystem... I thought that the problem was related to the fact that I was using the RC1 build of Windows 7... although that problem never manifested itself in the weeks before the Performance Update (HDD firmware fix) was installed and Windows 7 x64 RC1 had been on there and used frequently.
I recently purchased Windows 7 retail a few days ago and after a bit of trouble-free operation I started having problems again... always shutting the PC down carefully and I was asked to run the CHKDSK utility at boot twice already.
What to do?
Message was edited by: Panajev
MacBook Pro (2009) Mac OS X (10.6.1) Windows 7 x64, Bootcamp 3.0, recent HDD update
nicegom
Posts: 6
Registered: Nov 12, 2009
Re: Windows 7 x64, MacBook Pro, frequent CHKDSK after HDD firmware update
Posted: Nov 12, 2009 1:40 AM in response to: Panajev
Hi there,
I have a different experience. I installed Windows 7 before the "performance update 1.0" came out. I actually experienced the chkdsk launch problem with Windows 7. I had done repartitioning and clean-install several times but cannot solve the problem. So I tried to install XP and Vista on my MBA (Mid 2009 with SSD) and found that these two OS doesn't introduce such problem.
To be honest, I'm not sure which caused such problem, Windows 7, a bootcamp driver, or EFI. But I'm sure that CHKDSK in Windows 7 has an obvious bug that needs to be patched (memory leak and maybe this problem as well). So now I'm using Windows Vista SP2. And I'm happy with Vista SP2 (seems to become faster and stable now).
Cheer,
Message was edited by: nicegom
Macbook Air Windows Vista MBA of Mid 2009 with SSDWindows 7 x64 all updates
Just doublechecking. Does that include the recent chkdsk hotfixes?
[The Chkdsk.exe program does not start correctly on a Windows 7-based computer|http://support.microsoft.com/kb/975778] -
Windows Update Fails After fresh install
All,
Complete new installation of Windows 7 Pro on a X200 Tablet version. All ok, able to run all MS updates without any problems. After installing Lenovo System update and running the actual updates, I suddenly can't run Microsoft Update any longer, showing following error msg: "Windows Update cannot currently check for updates because the service is not running. You possibly have to restart the pc"
Offcourse I have tried rebooting, no success.
Intel drivers are installed, as suggested on another page. Currently running a systems restore to moment prior of System Update installation.
Any ideas?
Thanks
Pascal
Solved!
Go to Solution.System is now working properly, even with Lenovo System Update. Refusing to install the Intel drivers is indeed the solution. And the system runs smooth.
So thanks for the info!
Pascal -
Login to apex_admin failed after fresh install of Apex 3.1
I have installed Apex 3.1.
Now i am trying to login to the admin page:
http://host:7777/pls/apex/apex_admin
When i submit username and password and press a login button i return to exactly the same login page.
Apache log show the following:
<<
10.63.31.65 - APEX_PUBLIC_USER [14/Apr/2008:17:34:44 +0300] "POST /pls/apex/wwv_flow.accept HTTP/1.1" 302 174
10.63.31.65 - APEX_PUBLIC_USER [14/Apr/2008:17:34:44 +0300] "GET /pls/apex/f?p=4050:3:3489699423845827 HTTP/1.1" 302 5
10.63.31.65 - APEX_PUBLIC_USER [14/Apr/2008:17:34:44 +0300] "GET /pls/apex/f?p=4050:3:1586171788692736 HTTP/1.1" 302 5
10.63.31.65 - APEX_PUBLIC_USER [14/Apr/2008:17:34:44 +0300] "GET /pls/apex/f?p=4550:10:1586171788692736::::FSP_AFTER_LOGIN_URL:\\f?p=4050|3|1586171788692736\\ HTTP/1.1" 302 5
10.63.31.65 - APEX_PUBLIC_USER [14/Apr/2008:17:34:44 +0300] "GET /pls/apex/f?p=4550:10:882783301072528::::FSP_AFTER_LOGIN_URL:\\f?p=4050|3|1586171788692736\\ HTTP/1.1" 200 4709
>>
Any suggestions ?
Thank you
MichaelI have checked the same with Mozilla browser and no problem appeared.
The problem still exist with IE version 6
Any ideas what can be the problem ?
Thank you
Michael -
Early 2011 model fresh install of 10.6.7 upgrade to 10.6.8 fails
Hi,
I'm new to the mac world and so far I'm having some learning pains.
I just bought a macbook pro (early 2011) with i5 processor.
I do a fresh install of OSX 10.6.7 with the disc that comes with it and everything works great. BUT.. the automatic software updater tells me there is an update to OSX 10.6.8.
I allow this update to install and then it asks me to reboot (which I do).
Again, at this point everything is working fine. The system comes back up and I can do whatever I want.
The problem happens on the NEXT reboot. On the next reboot the system won't get past the apple logo.. it just hangs there forever (and the system gets very warm).
I can boot into safe mode, but I cannot seem to actually fix the problem. I've used "option v" but it seems to freeze at different points and I don't see any obvious error messages.
I've tried the default software update, and the combo update.
I've read that this might be due to the sandy bridge drivers. I do notice there is a special "10.6.7 update for early 2011 macbook pros" update out there... but I don't see anything for "10.6.8"
I don't know what to do next. I don't really want to stick with 10.6.7 forever...
Any help would be appreciated.First try the 10.6.8 combo updater. Sometimes the automatic software updaters miss something.
http://support.apple.com/kb/DL1399
and the supplemental update:
http://support.apple.com/kb/DL1429 -
Migration failed 10.8.1 fresh install
what goes on with this .... ?!
downloaded 10.8.1 from appstore, did a fresh install and after reboot and different windows the migration-window came, now i choosed "another volume" (same mac) the volume is shown, next window counts the gb's and after counting programms the window dissapears and all beginns from start.
i have done the fresh install twice, same "result"
this beta mount. lion is a real sadness.
iMac 27" i7 16gb ramthank you.
but why does'nt it work as it should/must ?
i had never problems with migration after new install with any other osx ... -
How to run downloaded drivers on Fresh Install of Labview 6.1 on a Mac G4 OS 9
I have just completed a fresh install of Labview 6.1 on an Macintosh G4 running OS9. I can run it and it seems to work just fine. I downloaded some drivers for an oscilloscope (HP 546XX) to run with an HP 54603b. When I installed, I went to open the 'Get Started.VI' I get a freeze and have to force quit out of labview. I am not sure how to resolve this. I am pretty sure that it is independent of the device, since I can open the vi's at least on another computer with no hardware attached. So I guess to boil my situation down. I have 2 questions:
-How do I get a fresh install on a mac G4 OS 9 to run downloaded drivers from the internet
-How do I ensure that I have the hardware configured on
a macintosh to run properly.
I really have little experience with macs so I am not really sure what my options are or what could be the problem so any assistance would be much appreciated.Hmmm. I wonder if NI-VISA isn't installed correctly on this machine.
When LabVIEW loads a VI that uses a VISA name control on the front panel, it queries VISA for the installed devices. Sometimes this takes a few seconds, but maybe in your case, something has been corrupted and it's hanging.
To try to narrow this down, first run the separate program "VISAConfig". This should list your devices. If this works, this means it's pretty likely that VISA is installed correctly.
Next, run LabVIEW. On an empty front panel, select the "Controls->I/O->VISA Resource Name" and place it on the front panel. When you click on the arrow on this control, you should see a list of your devices. If this works, then that indicates that LabVIEW is successfully talking
to the VISA software.
If both of those succeeded, then we have to take a closer look at this particular instrument driver. Can you drop other VIs (say, Initialize or Close) without hanging?
If either of the first two steps fail, I'd suggest that you reinstall the VISA software. You may want to try the latest version of NI-VISA (from ni.com), but first confirm that it supports LabVIEW 6.1.
I hope this helps.
Brian -
Very slow Mac, compared to when running a fresh install
I was wondering if anyone could help me diagnose the reason for my mac being so slow. (Eg 1.5-3 minute boot up as opposed to 15-20 seconds) And why it takes a long time to load a lot of things. I have restored this from a time machine partition, so I believe something has transferred over incorrectly resulting in this general sluggishness of the system.
I have tried disabling all Startup items, disconnecting all external devices, but to no real success.
Here's the boot log of the system below, where I've noticed it hangs after posting FIPS success.
I was wondering if anyone could point me to any of the things that look suspicious? I've tried, but I haven't been able to find out what is causing it, as I believe the process that is causing this sluggishnesh begins at startup.
30/05/13 4:24:10.000 PM bootlog[0]: BOOT_TIME 1369895050 0
30/05/13 4:24:25.000 PM kernel[0]: PMAP: PCID enabled
30/05/13 4:24:25.000 PM kernel[0]: Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
30/05/13 4:24:25.000 PM kernel[0]: vm_page_bootstrap: 1993882 free pages and 86886 wired pages
30/05/13 4:24:25.000 PM kernel[0]: kext submap [0xffffff7f80735000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000735000]
30/05/13 4:24:25.000 PM kernel[0]: zone leak detection enabled
30/05/13 4:24:25.000 PM kernel[0]: standard timeslicing quantum is 10000 us
30/05/13 4:24:25.000 PM kernel[0]: standard background quantum is 2500 us
30/05/13 4:24:25.000 PM kernel[0]: mig_table_max_displ = 74
30/05/13 4:24:11.661 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
30/05/13 4:24:25.000 PM kernel[0]: TSC Deadline Timer supported and enabled
30/05/13 4:24:25.000 PM kernel[0]: corecrypto kext started!
30/05/13 4:24:25.000 PM kernel[0]: Running kernel space in FIPS MODE
30/05/13 4:24:25.000 PM kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
30/05/13 4:24:25.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
30/05/13 4:24:11.664 PM com.apple.launchd[1]: *** Verbose boot, will log to /dev/console. ***
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
30/05/13 4:24:11.667 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
30/05/13 4:24:24.316 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for Sandbox
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for Quarantine
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
30/05/13 4:24:25.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
30/05/13 4:24:25.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
30/05/13 4:24:25.000 PM kernel[0]: MAC Framework successfully initialized
30/05/13 4:24:25.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
30/05/13 4:24:25.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
30/05/13 4:24:25.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5]
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1223PFM64 (36 cpu) 0xf80000000, 0x80000000
30/05/13 4:24:25.000 PM kernel[0]: [ PCI configuration begin ]
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
30/05/13 4:24:25.000 PM kernel[0]: console relocated to 0xfc0010000
30/05/13 4:24:25.000 PM kernel[0]: PCI configuration changed (bridge=16 device=3 cardbus=0)
30/05/13 4:24:25.000 PM kernel[0]: [ PCI configuration end, bridges 12 devices 17 ]
30/05/13 4:24:25.000 PM kernel[0]: Thunderbolt runtime power conservation disabled.
30/05/13 4:24:25.000 PM kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
30/05/13 4:24:25.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
30/05/13 4:24:25.000 PM kernel[0]: rooting via boot-uuid from /chosen: 9DADC387-C048-3E67-AFB3-3344605810FC
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
30/05/13 4:24:25.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
30/05/13 4:24:25.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe912174; max speed s800.
30/05/13 4:24:25.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST31000528AS Media/IOGUIDPartitionScheme/Macintosh HD@2
30/05/13 4:24:25.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 1
30/05/13 4:24:25.000 PM kernel[0]: Kernel is LP64
30/05/13 4:24:25.000 PM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
30/05/13 4:24:25.000 PM kernel[0]: USBMSC Identifier (non-unique): MY69FD72DY04KS 0x3f0 0x5a11 0x100
30/05/13 4:24:25.000 PM kernel[0]: ath_get_caps[4038] rx chainmask mismatch actual 7 sc_chainmak 0
30/05/13 4:24:25.000 PM kernel[0]: 1.297317: ath_get_caps[4013] tx chainmask mismatch actual 7 sc_chainmak 0
30/05/13 4:24:25.000 PM kernel[0]: 1.303430: Atheros: mac 448.3 phy 342.14 radio 0.0
30/05/13 4:24:25.000 PM kernel[0]: 1.304325: Use hw queue 0 for WME_AC_BE traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.305204: Use hw queue 1 for WME_AC_BK traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.306047: Use hw queue 2 for WME_AC_VI traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.306882: Use hw queue 3 for WME_AC_VO traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.307725: Use hw queue 8 for CAB traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.308463: Use hw queue 9 for beacons
30/05/13 4:24:25.000 PM kernel[0]: 1.309205: wlan_vap_create : enter. devhandle=0xd9f3e658, opmode=IEEE80211_M_STA, flags=0x1
30/05/13 4:24:25.000 PM kernel[0]: 1.310853: wlan_vap_create : exit. devhandle=0xd9f3e658, opmode=IEEE80211_M_STA, flags=0x1.
30/05/13 4:24:27.000 PM kernel[0]: BCM5701Enet: Ethernet address c8:2a:14:21:ba:13
30/05/13 4:24:27.000 PM kernel[0]: AirPort_AtherosNewma40: Ethernet address e4:ce:8f:5f:b3:53
30/05/13 4:24:27.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
30/05/13 4:24:27.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished():
30/05/13 4:24:33.000 PM kernel[0]: IOBluetoothUSBDFU::probe
30/05/13 4:24:33.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0201
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
30/05/13 4:24:33.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
30/05/13 4:24:33.000 PM kernel[0]: Previous Shutdown Cause: 5
30/05/13 4:24:33.000 PM kernel[0]: AMDBartsGraphicsAccelerator: ** Device in slot: SLOT--1 **
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
30/05/13 4:24:33.317 PM hidd[48]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
30/05/13 4:24:33.863 PM cfprefsd[21]: CFPreferences failed to read preferences data. Errno was 21
30/05/13 4:24:33.864 PM cfprefsd[21]: CFPreferences failed to read preferences data. Errno was 21
30/05/13 4:24:33.971 PM mDNSResponder[39]: mDNSResponder mDNSResponder-379.37 (Dec 16 2012 19:43:09) starting OSXVers 12
30/05/13 4:24:34.000 PM kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6720
30/05/13 4:24:34.000 PM kernel[0]: DSMOS has arrived
30/05/13 4:24:40.810 PM coreservicesd[62]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
30/05/13 4:24:40.836 PM blued[57]: Read the UHE Info
30/05/13 4:24:40.836 PM blued[57]: Read version 2 info. Number of devices:2
30/05/13 4:24:40.836 PM blued[57]: Class of device: 0x2580
30/05/13 4:24:40.836 PM blued[57]: Device name: 'My Mosse-Robinson’s Mouse' length:30
30/05/13 4:24:40.836 PM blued[57]: Finished reading the HID data
30/05/13 4:24:40.836 PM blued[57]: Found a device with PID:0x030d VID:0x05ac
30/05/13 4:24:40.837 PM blued[57]: Class of device: 0x2540
30/05/13 4:24:40.837 PM blued[57]: Device name: 'My Mosse-Robinson’s Keyboard' length:33
30/05/13 4:24:40.837 PM blued[57]: Finished reading the HID data
30/05/13 4:24:40.837 PM blued[57]: Found a device with PID:0x0239 VID:0x05ac
30/05/13 4:24:41.000 PM kernel[0]: macx_swapon SUCCESS
30/05/13 4:24:41.529 PM WindowServer[88]: Server is starting up
30/05/13 4:24:41.531 PM WindowServer[88]: Session 256 retained (2 references)
30/05/13 4:24:41.531 PM WindowServer[88]: Session 256 released (1 references)
30/05/13 4:24:41.538 PM WindowServer[88]: Session 256 retained (2 references)
30/05/13 4:24:41.538 PM WindowServer[88]: init_page_flip: page flip mode is on
30/05/13 4:24:41.538 PM WindowServer[88]: init_resolution: resolution is enabled
30/05/13 4:24:41.694 PM WindowServer[88]: mux_initialize: Couldn't find any matches
30/05/13 4:24:41.706 PM WindowServer[88]: GLCompositor enabled for tile size [256 x 256]
30/05/13 4:24:41.706 PM WindowServer[88]: CGXGLInitMipMap: mip map mode is on
30/05/13 4:24:41.733 PM WindowServer[88]: WSMachineUsesNewStyleMirroring: false
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x042801c0: GL mask 0x1; bounds (0, 0)[2560 x 1440], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a007, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00700000000042801c0
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f0040: GL mask 0x10; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffff003f0040
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
30/05/13 4:24:41.734 PM WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
30/05/13 4:24:41.739 PM WindowServer[88]: Created shield window 0x5 for display 0x042801c0
30/05/13 4:24:41.739 PM WindowServer[88]: Created shield window 0x6 for display 0x003f0040
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x7 for display 0x003f003f
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x8 for display 0x003f003e
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x9 for display 0x003f003d
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x042801c0: GL mask 0x1; bounds (0, 0)[2560 x 1440], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a007, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00700000000042801c0
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f0040: GL mask 0x10; bounds (3584, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffff003f0040
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003f: GL mask 0x8; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (3586, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (3587, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
30/05/13 4:24:41.741 PM WindowServer[88]: CGXPerformInitialDisplayConfiguration
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; Vendor 0x610 Model 0xa007 S/N 0 Dimensions 23.50 x 13.23; online enabled built-in, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f0040: MappedDisplay Unit 4; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3586,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.742 PM WindowServer[88]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3587,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.896 PM WindowServer[88]: GLCompositor: GL renderer id 0x01021b05, GL mask 0x0000001f, accelerator 0x0000481b, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
30/05/13 4:24:41.896 PM WindowServer[88]: GLCompositor: GL renderer id 0x01021b05, GL mask 0x0000001f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
30/05/13 4:24:41.911 PM hidd[48]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
30/05/13 4:24:41.911 PM WindowServer[88]: Unable to open IOHIDSystem (e00002bd)
30/05/13 4:24:41.000 PM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
30/05/13 4:24:42.000 PM kernel[0]: [BNBMouseDevice::init][75.19] init is complete
30/05/13 4:24:43.000 PM kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1
30/05/13 4:24:43.000 PM kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
30/05/13 4:24:43.000 PM kernel[0]: [AppleMultitouchDevice::start] entered
30/05/13 4:24:43.372 PM com.apple.SecurityServer[15]: Session 100000 created
30/05/13 4:24:43.740 PM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:44.615 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.yVQnGnD to blued.plist, errno was 21.
30/05/13 4:24:44.902 PM WindowServer[88]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042801c0 device: 0x101ed8a10 isBackBuffered: 1 numComp: 3 numDisp: 3
30/05/13 4:24:46.000 PM kernel[0]: NTFS driver 3.10 [Flags: R/W].
30/05/13 4:24:46.000 PM kernel[0]: NTFS volume name BOOTCAMP, version 3.1.
30/05/13 4:24:48.639 PM airportd[95]: _processDLILEvent: en1 attached (down)
30/05/13 4:24:48.000 PM kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff801c6a2000
30/05/13 4:24:48.000 PM kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
30/05/13 4:24:48.765 PM com.apple.SecurityServer[15]: Entering service
30/05/13 4:24:48.821 PM awacsd[58]: Starting awacsd connectivity-78.2 (Dec 16 2012 19:43:29)
30/05/13 4:24:48.822 PM loginwindow[42]: Login Window Application Started
30/05/13 4:24:48.824 PM awacsd[58]: InnerStore CopyAllZones: no info in Dynamic Store
30/05/13 4:24:48.878 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
30/05/13 4:24:48.881 PM loginwindow[42]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:48.886 PM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
30/05/13 4:24:48.906 PM mDNSResponder[39]: D2D_IPC: Loaded
30/05/13 4:24:48.906 PM mDNSResponder[39]: D2DInitialize succeeded
30/05/13 4:24:48.909 PM mDNSResponder[39]: Adding registration domain 167899042.members.btmm.icloud.com.
30/05/13 4:24:48.938 PM awacsd[58]: Configuring lazy AWACS client: 167899042.p04.members.btmm.icloud.com.
30/05/13 4:24:48.974 PM digest-service[114]: label: default
30/05/13 4:24:48.975 PM digest-service[114]: dbname: od:/Local/Default
30/05/13 4:24:48.975 PM digest-service[114]: mkey_file: /var/db/krb5kdc/m-key
30/05/13 4:24:48.975 PM digest-service[114]: acl_file: /var/db/krb5kdc/kadmind.acl
30/05/13 4:24:48.976 PM digest-service[114]: digest-request: uid=0
30/05/13 4:24:48.993 PM rpcsvchost[118]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
30/05/13 4:24:48.995 PM digest-service[114]: digest-request: init request
30/05/13 4:24:48.998 PM digest-service[114]: digest-request: init return domain: BUILTIN server: LOCALHOST
30/05/13 4:24:49.008 PM aosnotifyd[119]: bootstrap_look_up failed (44e)
30/05/13 4:24:49.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
30/05/13 4:24:49.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:49.000 PM kernel[0]: 39.409929: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
30/05/13 4:24:49.000 PM kernel[0]: 39.409936: switchVap from 1 to 1
30/05/13 4:24:49.176 PM kdc[45]: label: default
30/05/13 4:24:49.176 PM kdc[45]: dbname: od:/Local/Default
30/05/13 4:24:49.177 PM kdc[45]: mkey_file: /var/db/krb5kdc/m-key
30/05/13 4:24:49.177 PM kdc[45]: acl_file: /var/db/krb5kdc/kadmind.acl
30/05/13 4:24:49.190 PM kdc[45]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
30/05/13 4:24:49.227 PM kdc[45]: KDC started
30/05/13 4:24:49.389 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
30/05/13 4:24:49.389 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:49.409 PM configd[17]: network changed: DNS*
30/05/13 4:24:49.410 PM configd[17]: setting hostname to "My-iMac.local"
30/05/13 4:24:49.000 PM kernel[0]: 40.066078: performCountryCodeOperation: Not connected, scan in progress[0]
30/05/13 4:24:49.000 PM kernel[0]: 40.068173: setWOW_PARAMETERS:wowevents = 2(1)
30/05/13 4:24:49.809 PM InternetSharing[46]: objc[46]: Object 0x7fcb18d007f0 of class __NSDictionaryM autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug
30/05/13 4:24:49.829 PM com.apple.InternetSharing[46]: *** no interface for service
30/05/13 4:24:50.202 PM mds[38]: (Normal) FMW: FMW 0 0
30/05/13 4:24:50.369 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.tGGJbEu to blued.plist, errno was 21.
30/05/13 4:24:50.370 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.fqIWXwi to blued.plist, errno was 21.
30/05/13 4:24:50.652 PM appleeventsd[54]: main: Starting up
30/05/13 4:24:50.660 PM awacsd[58]: KV HTTP 0
30/05/13 4:24:51.219 PM locationd[43]: NOTICE,Location icon should now be in state 0
30/05/13 4:24:51.236 PM sudo[135]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 777 /dev/disk0s4
30/05/13 4:24:51.000 PM kernel[0]: en1: BSSID changed to 94:44:52:e5:e8:6e
30/05/13 4:24:51.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:51.000 PM kernel[0]: AirPort: Link Up on en1
30/05/13 4:24:51.000 PM kernel[0]: en1: BSSID changed to 94:44:52:e5:e8:6e
30/05/13 4:24:51.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:51.000 PM kernel[0]: 42.397428: setWOW_PARAMETERS:wowevents = 2(1)
30/05/13 4:24:51.000 PM kernel[0]: AirPort: RSN handshake complete on en1
30/05/13 4:24:52.001 PM com.apple.usbmuxd[27]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
30/05/13 4:24:52.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,45e1,0000]
30/05/13 4:24:53.916 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:53.932 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:54.533 PM WindowServer[88]: Created shield window 0xa for display 0x042801c0
30/05/13 4:24:54.533 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.534 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.553 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.550 PM launchctl[142]: com.apple.findmymacmessenger: Already loaded
30/05/13 4:24:54.560 PM com.apple.SecurityServer[15]: Session 100003 created
30/05/13 4:24:54.795 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:54.796 PM hidd[48]: CGSShutdownServerConnections: Detaching application from window server
30/05/13 4:24:54.796 PM hidd[48]: CGSDisplayServerShutdown: Detaching display subsystem from window server
30/05/13 4:24:54.808 PM loginwindow[42]: Login Window Started Security Agent
30/05/13 4:24:54.863 PM fseventsd[49]: Logging disabled completely for device:1: /Volumes/Recovery HD
30/05/13 4:24:55.143 PM configd[17]: network changed: v4(en0+:192.168.2.180) DNS+ Proxy+ SMB
30/05/13 4:24:55.280 PM mds[38]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
30/05/13 4:24:55.000 PM kernel[0]: Sandbox: sandboxd(157) deny mach-lookup com.apple.coresymbolicationd
30/05/13 4:24:53.798 PM ntpd[112]: proto: precision = 1.000 usec
30/05/13 4:24:53.985 PM com.apple.InternetSharing[46]: InternetSharing: com.apple.InternetSharing.broadcast-0 has been started
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: BCAST is ready [en0, mtu=1500, 2 DNS server(s), 0 DNSv6 server(s)]
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: removed addr=fe80::e6ce:8fff:fe5f:b353 on en1
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: added addr=192.168.3.1 mask=255.255.255.0 on bridge0
30/05/13 4:24:53.000 PM kernel[0]: 45.946953: Invoking setHOST_AP_MODE
30/05/13 4:24:53.000 PM kernel[0]: 45.946957: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
30/05/13 4:24:53.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
30/05/13 4:24:53.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:53.000 PM kernel[0]: 45.960195: setDISASSOCIATE ****STA SYNC DISASSOC SUCCESS
30/05/13 4:24:53.000 PM kernel[0]: 45.960200: switchVap from 1 to 6
30/05/13 4:24:53.000 PM kernel[0]: 45.979212: osif_com_vap_event_handler vap delete event
30/05/13 4:24:53.000 PM kernel[0]: 45.979219: deleteVap ****SYNC VAP DELETE SUCCESS
30/05/13 4:24:53.000 PM kernel[0]: 45.982272: Invoking setRSN_CONF
30/05/13 4:24:53.000 PM kernel[0]: AirPort: Link Up on en1
30/05/13 4:24:53.000 PM kernel[0]: en1: BSSID changed to e4:ce:8f:5f:b3:53
30/05/13 4:24:53.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:53.000 PM kernel[0]: 46.007045: Invoking getKEY_RSC
30/05/13 4:24:53.000 PM kernel[0]: en1: promiscuous mode enable succeeded
30/05/13 4:24:53.000 PM kernel[0]: bridge_attach_protocol: en1
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: com.apple.InternetSharing.broadcast-0 started: [DNS subnet=192.168.3/24 on bridge0]
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: dns[0]: 192.168.2.1
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: dns[1]: 192.168.2.1
30/05/13 4:24:54.095 PM SecurityAgent[153]: This is the first run
30/05/13 4:24:54.095 PM SecurityAgent[153]: MacBuddy was run = 0
30/05/13 4:24:54.122 PM SecurityAgent[153]: User info context values set for My
30/05/13 4:24:54.178 PM com.apple.InternetSharing[46]: com.apple.InternetSharing.broadcast-0 started: [DHCP subnet=192.168.3/24 on bridge0 mtu=1500 <---> en0 mtu=1500] max-mss=1460
30/05/13 4:24:54.178 PM com.apple.InternetSharing[46]: dns[0]: 192.168.3.1
30/05/13 4:24:54.309 PM com.apple.InternetSharing[46]: started "natpmpd"
30/05/13 4:24:54.457 PM loginwindow[42]: Login Window - Returned from Security Agent
30/05/13 4:24:54.459 PM loginwindow[42]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
30/05/13 4:24:54.484 PM loginwindow[42]: USER_PROCESS: 42 console
30/05/13 4:24:55.020 PM named[160]: starting BIND 9.8.3-P1 -c /etc/com.apple.named.proxy.conf -f
30/05/13 4:24:55.020 PM named[160]: built with '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' '--prefix=/usr' '--sysconfdir=/private/etc' '--localstatedir=/private/var' '--enable-atomic=no' '--with-openssl=yes' '--with-gssapi=yes' '--enable-symtable=none' 'CC=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/u sr/bin/cc' 'CFLAGS=-arch i386 -arch x86_64 -g -Os -pipe -gdwarf-2 ' 'LDFLAGS=-arch i386 -arch x86_64 -framework IOKit -framework CoreFoundation' 'CXX=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/ usr/bin/c++' 'CXXFLAGS=-arch i386 -arch x86_64 -g -Os -pipe '
30/05/13 4:24:55.020 PM named[160]: ----------------------------------------------------
30/05/13 4:24:55.020 PM named[160]: BIND 9 is maintained by Internet Systems Consortium,
30/05/13 4:24:55.020 PM named[160]: Inc. (ISC), a non-profit 501(c)(3) public-benefit
30/05/13 4:24:55.020 PM named[160]: corporation. Support and training for BIND 9 are
30/05/13 4:24:55.020 PM named[160]: available at https://www.isc.org/support
30/05/13 4:24:55.020 PM named[160]: ----------------------------------------------------
30/05/13 4:24:55.587 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:24:55.587 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:55.897 PM com.apple.launchd[1]: (com.apple.xprotectupdater[25]) Exited with code: 252
30/05/13 4:24:55.989 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:56.000 PM kernel[0]: utun_ctl_connect: creating interface utun0
30/05/13 4:24:56.169 PM named[160]: running
30/05/13 4:24:56.170 PM UserEventAgent[143]: cannot find useragent 1102
30/05/13 4:24:56.171 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:56.237 PM com.apple.launchd.peruser.501[164]: (com.apple.gamed) Ignored this key: UserName
30/05/13 4:24:56.237 PM com.apple.launchd.peruser.501[164]: (com.apple.gamed) Ignored this key: GroupName
30/05/13 4:24:56.238 PM com.apple.launchd.peruser.501[164]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
30/05/13 4:24:56.241 PM loginwindow[42]: Connection with distnoted server was invalidated
30/05/13 4:24:56.249 PM distnoted[168]: # distnote server agent absolute time: 48.352954504 civil time: Thu May 30 16:24:56 2013 pid: 168 uid: 501 root: no
30/05/13 4:24:56.526 PM blued[57]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
30/05/13 4:24:56.664 PM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:57.425 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:58.103 PM BezelServices 236.3[42]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
30/05/13 4:24:58.105 PM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=116
30/05/13 4:24:58.122 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:58.278 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:24:58.278 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:58.751 PM com.apple.launchd.peruser.501[164]: (com.apple.afpstat-qfa[211]) Exited with code: 2
30/05/13 4:24:58.835 PM NetworkBrowserAgent[217]: Starting NetworkBrowserAgent
30/05/13 4:24:59.684 PM bootpd[161]: server name My-iMac.local
30/05/13 4:24:59.684 PM bootpd[161]: interface en0: ip 192.168.2.180 mask 255.255.255.0
30/05/13 4:24:59.684 PM bootpd[161]: interface bridge0: ip 192.168.3.1 mask 255.255.255.0
30/05/13 4:25:00.083 PM bootpd[161]: service time 0.000010 seconds
30/05/13 4:25:00.395 PM com.apple.launchd.peruser.501[164]: (com.apple.mrt.uiagent[201]) Exited with code: 255
30/05/13 4:25:00.894 PM fseventsd[49]: check_vol_last_mod_time:XXX failed to get mount time (25; &mount_time == 0x10d075518)
30/05/13 4:25:00.894 PM fseventsd[49]: log dir: /Volumes/External/.fseventsd getting new uuid: 1977A513-201A-4A9B-8A40-AB9A585F82AB
30/05/13 4:25:01.093 PM mDNSResponderHelper[74]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
30/05/13 4:25:02.998 PM apsd[60]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
30/05/13 4:25:03.069 PM configd[17]: inet_set_autoaddr(en1, 1) failed, Resource busy (16)
30/05/13 4:25:03.069 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:03.069 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:04.125 PM WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
30/05/13 4:25:04.171 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:04.171 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:04.584 PM GrowlLauncher[195]: Launching Growl at URL: file://localhost/Applications/Growl.app/Contents/MacOS/Growl
30/05/13 4:25:06.238 PM com.apple.SecurityServer[15]: Session 100005 created
30/05/13 4:25:06.302 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:06.302 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:10.699 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:10.699 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:10.886 PM bootpd[161]: DHCP REQUEST [bridge0]: 1,d8:a2:5e:53:4d:68 <My-iPad>
30/05/13 4:25:11.000 PM kernel[0]: 62.766797: osif_connect_event: sta: d8:a2:5e:53:4d:68 arrive message posted
30/05/13 4:25:11.000 PM kernel[0]: 62.783435: Invoking setSTA_AUTHORIZE
30/05/13 4:25:12.321 PM bootpd[161]: ACK sent My-iPad 192.168.3.6 pktsize 300
30/05/13 4:25:12.321 PM bootpd[161]: service time 1.602424 seconds
30/05/13 4:25:12.321 PM bootpd[161]: DHCP REQUEST [bridge0]: 1,d8:a2:5e:53:4d:68 <My-iPad>
30/05/13 4:25:13.253 PM bootpd[161]: ACK sent My-iPad 192.168.3.6 pktsize 300
30/05/13 4:25:13.253 PM bootpd[161]: service time 0.932620 seconds
30/05/13 4:25:14.366 PM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationBirth to notificationID=115
30/05/13 4:25:14.818 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 5
30/05/13 4:25:14.818 PM com.apple.usbmuxd[27]: _BrowseReplyReceivedCallback (thread 0x7fff778fd180): Error doing DNSServiceResolve(): -65540
30/05/13 4:25:15.492 PM Growl[250]: Setup timer, this should only happen once
30/05/13 4:25:15.493 PM Growl[250]: Next image check no earlier than 24 hours from 2013-05-29 13:59:00 +0000
30/05/13 4:25:15.584 PM Image Capture Extension[253]: Another instance of 'Image Capture Extension' is already running! This instance is exiting.
30/05/13 4:25:15.585 PM com.apple.launchd.peruser.501[164]: ([0x0-0x17017].com.apple.ImageCaptureExtension2[253]) Exited with code: 1
30/05/13 4:25:15.585 PM HPScanner[230]: ERROR: Image Capture Extension went away!
30/05/13 4:25:16.174 PM com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[147]) Exit timeout elapsed (20 seconds). Killing
30/05/13 4:25:18.125 PM WindowServer[88]: disable_update_likely_unbalanced: UI updates still disabled by application "SystemUIServer" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
30/05/13 4:25:19.620 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:19.620 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:20.909 PM WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 17.78 seconds (server forcibly re-enabled them after 1.00 seconds)
30/05/13 4:25:21.195 PM BetterSnapTool[237]: kCGErrorIllegalArgument: CGSUnregisterWindowWithSystemStatusBar: Invalid window
30/05/13 4:25:21.225 PM configd[17]: set_arp_linklocal(en1) SIOCARPIPLL 1 failed, Resource busy
30/05/13 4:25:21.228 PM configd[17]: network changed: v4(en0:192.168.2.180, en1+:169.254.217.249) DNS Proxy SMB
30/05/13 4:25:21.664 PM UserEventAgent[11]: Captive: Online (HostAP mode)
30/05/13 4:25:21.667 PM configd[17]: network changed: v4(en0:192.168.2.180, en1) DNS Proxy SMB
30/05/13 4:25:21.859 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:25:22.003 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:25:25.674 PM mDNSResponderHelper[259]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
30/05/13 4:25:26.937 PM named[160]: client 192.168.3.6#63922: error sending response: host unreachable
30/05/13 4:25:29.935 PM named[160]: client 192.168.3.6#63922: error sending response: host unreachable
30/05/13 4:25:31.946 PM com.apple.SecurityServer[15]: Session 100009 created
30/05/13 4:25:32.086 PM WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
30/05/13 4:25:32.268 PM WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.18 seconds (server forcibly re-enabled them after 1.00 seconds)1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists. -
Why is Mavericks running so slowly after a fresh install on my Macbook Pro?
I have a 13-inch, Early 2011 Macbook Pro.
Towards the end of 2013 Mountain Lion had been running very sluggishly, and I was getting the spinning beachball of death all the time, so I decided to do a fresh install of Mavericks. I wiped my whole HD using disk utility and installed Mavericks from a flash drive.
I then installed Microsoft Office 2011 from the original DVD and set up Mac Mail to work with my Gmail account etc. All very standard. I also installed X-Code and various other things related to my work, but nothing crazy. My HD is only half-full (I have 141 GB of free space).
Despite this, everything is running really sluggishly (especially when MS Office programs are open) and I have to watch the beachball of death spin for about 10 seconds every minute.
Any help is greatly appreciated!
Here is the Etrecheck output:
Hardware Information:
MacBook Pro (13-inch, Early 2011)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 2 days 3:4:35
Disk Information:
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 319.21 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898 disk2 : (8.09 GB)
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.robohippo.HippoConnectDaemon.plist 3rd-Party support link
[System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
[System] cx.pow.firewall.plist 3rd-Party support link
Launch Agents:
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.robohippo.HippoConnectAgent.plist 3rd-Party support link
[System] com.trusteer.rapport.rapportd.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
[not loaded] cx.pow.powd.plist 3rd-Party support link
User Login Items:
iTunesHelper
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Trusteer Endpoint Protection 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Epson Printer Utility 4: Version: 9.17 - SDK 10.5 3rd-Party support link
/Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Smultron: Version: 3.8.4 - SDK 10.0 3rd-Party support link
Time Machine:
Auto backup: YES
Volumes being backed up:
Destinations:
Time Machine Backups [Local] (Last used)
Total size: 412.18 GB
Total number of backups: 4
Oldest backup: 2014-01-07 12:40:04 +0000
Last backup: 2014-01-20 17:50:35 +0000
Size of backup disk: Excellent
Backup size 412.18 GB > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
17% Mail
8% mtmd
5% mds_stores
3% mds
2% iTunes
Top Processes by Memory:
217 MB Mail
184 MB com.apple.WebKit.WebContent
139 MB softwareupdated
115 MB mds_stores
106 MB Google Chrome
Virtual Memory Information:
186 MB Free RAM
1.21 GB Active RAM
983 MB Inactive RAM
1.07 GB Wired RAM
7.85 GB Page-ins
326 MB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -q XML\|exec && echo $f; done; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`SP USB | awk '/V.*[(]/{if ($3 !~ /0(5a|a5)c/) print}' | wc -l`; Ps "3rd-party USB devices"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print}' | tail`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec sh
and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Can't login after fresh installing gnome using gdm 3.2 [SOLVED]
I don't know if this topic was already solved, I hope someone can help me about this. I have a fresh install of arch linux (just yesterday) and installed gnome and gnome-extra packages. As usual, I go with the procedure of editing my .xinitrc (exec ck-launch-session dbus-launch gnome-session), rc.conf (...dbus networkmanager...), inittab (runlvl 5, x:5......gdm). After a reboot, gdm screen appeared, I can't find my account, then there were two choices, "Sign in" and "Not listed..."). I clicked Not listed, then entered my user and password, after that, it responded: Authentication failure/failed... or something like that. I tried it again and it's the same. Temporarily, I'm using startx or slim (depends on my mood). Can anyone help me?
here's my gdm's 0.log and 0-greeter.log respectively:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at [url]http://bugs.freedesktop.org[/url]/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See [url]http://wiki.x.org/wiki/GitPage[/url] for git access instructions.
X.Org X Server 1.11.1.901 (1.11.2 RC 1)
Release Date: 2011-10-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0-ARCH i686
Current Operating System: Linux espionage 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 12:14:48 UTC 2011 i686
Kernel command line: root=/dev/disk/by-uuid/9645b27b-41ee-461a-b4f0-f5ba1794542c ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Build Date: 24 October 2011 12:26:09PM
Current version of pixman: 0.22.2
Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 19:43:23 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/OTF/" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(--) PCI:*(0:0:2:0) 8086:27a2:1025:012f rev 3, Mem @ 0xdc100000/524288, 0xc0000000/268435456, 0xdc200000/262144, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:27a6:1025:012f rev 3, Mem @ 0xdc180000/524288
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.11.1.901, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.11.1.901, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.11.1.901, module version = 1.0.0
(==) AIGLX enabled
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.11.1.901, module version = 1.13.0
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.11.1.901, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.11.1.901, module version = 1.2.0
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.10.99.902, module version = 2.16.0
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.11.1, module version = 2.3.0
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.10.99.902, module version = 0.4.2
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(++) using VT number 7
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading /usr/lib/xorg/modules/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.11.1.901, module version = 0.0.2
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(**) intel(0): Relaxed fencing disabled
(**) intel(0): Wait on SwapBuffers? enabled
(**) intel(0): Triple buffering? enabled
(**) intel(0): Framebuffer tiled
(**) intel(0): Pixmaps tiled
(**) intel(0): 3D buffers tiled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: SEC Model: 4442 Serial#: 0
(II) intel(0): Year: 2006 Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 68.9 MHz Image Size: 303 x 190 mm
(II) intel(0): h_active: 1280 h_sync: 1292 h_sync_end 1356 h_blank_end 1408 h_border: 0
(II) intel(0): v_active: 800 v_sync: 803 v_sync_end 806 v_blanking: 816 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): SAMSUNG
(II) intel(0): LTN141W3-L01
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004ca3424400000000
(II) intel(0): 00100103801e13780a87f594574f8c27
(II) intel(0): 27505400000001010101010101010101
(II) intel(0): 010101010101ee1a0080502010300c40
(II) intel(0): 33002fbe100000190000000f00000000
(II) intel(0): 00000000002387026400000000fe0053
(II) intel(0): 414d53554e470a2020202020000000fe
(II) intel(0): 004c544e31343157332d4c30310a0064
(II) intel(0): EDID vendor "SEC", prod id 17474
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output TV1
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(**) intel(0): Display dimensions: (300, 190) mm
(**) intel(0): DPI set to (108, 106)
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.11.1.901, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.11.1.901, module version = 1.2.0
(II) Unloading vesa
(II) Unloading fbdev
(II) Unloading fbdevhw
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(II) intel(0): [DRI2] DRI driver: i915
(II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(==) intel(0): hotplug detection: "enabled"
(--) RandR disabled
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_INTEL_swap_event
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized i915
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.10.99.902, module version = 2.6.0
(II) Using input driver 'evdev' for 'Power Button'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(--) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(II) config/udev: Adding input device Video Bus (/dev/input/event5)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Video Bus'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(--) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
(II) config/udev: Adding input device Lid Switch (/dev/input/event1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event2)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Sleep Button'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(--) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device A4TECH USB Device (/dev/input/event9)
(**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'A4TECH USB Device'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) A4TECH USB Device: always reports core events
(**) A4TECH USB Device: Device: "/dev/input/event9"
(--) A4TECH USB Device: Found 1 mouse buttons
(--) A4TECH USB Device: Found scroll wheel(s)
(--) A4TECH USB Device: Found relative axes
(--) A4TECH USB Device: Found absolute axes
(--) A4TECH USB Device: Found x and y absolute axes
(--) A4TECH USB Device: Found keys
(II) A4TECH USB Device: Configuring as mouse
(II) A4TECH USB Device: Configuring as keyboard
(II) A4TECH USB Device: Adding scrollwheel support
(**) A4TECH USB Device: YAxisMapping: buttons 4 and 5
(**) A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 9)
(EE) A4TECH USB Device: failed to initialize for relative axes.
(WW) A4TECH USB Device: found 37 axes, limiting to 36.
(II) A4TECH USB Device: initialized for absolute axes.
(**) A4TECH USB Device: (accel) keeping acceleration scheme 1
(**) A4TECH USB Device: (accel) acceleration profile 0
(**) A4TECH USB Device: (accel) acceleration factor: 2.000
(**) A4TECH USB Device: (accel) acceleration threshold: 4
(II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device A4TECH USB Device (/dev/input/event10)
(**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'A4TECH USB Device'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) A4TECH USB Device: always reports core events
(**) A4TECH USB Device: Device: "/dev/input/event10"
(--) A4TECH USB Device: Found 20 mouse buttons
(--) A4TECH USB Device: Found scroll wheel(s)
(--) A4TECH USB Device: Found relative axes
(--) A4TECH USB Device: Found x and y relative axes
(II) A4TECH USB Device: Configuring as mouse
(II) A4TECH USB Device: Adding scrollwheel support
(**) A4TECH USB Device: YAxisMapping: buttons 4 and 5
(**) A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 10)
(II) A4TECH USB Device: initialized for relative axes.
(**) A4TECH USB Device: (accel) keeping acceleration scheme 1
(**) A4TECH USB Device: (accel) acceleration profile 0
(**) A4TECH USB Device: (accel) acceleration factor: 2.000
(**) A4TECH USB Device: (accel) acceleration threshold: 4
(II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Acer CrystalEye webcam (/dev/input/event11)
(**) Acer CrystalEye webcam: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Acer CrystalEye webcam'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) Acer CrystalEye webcam: always reports core events
(**) Acer CrystalEye webcam: Device: "/dev/input/event11"
(--) Acer CrystalEye webcam: Found keys
(II) Acer CrystalEye webcam: Configuring as keyboard
(II) XINPUT: Adding extended input device "Acer CrystalEye webcam" (type: KEYBOARD, id 11)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(--) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.11.0, module version = 1.5.0
(II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(**) SynPS/2 Synaptics TouchPad: always reports core events
(--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right scroll-buttons
(--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
(--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
(**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
(**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
(**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
(--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver/identifier specified (ignoring)
(II) intel(0): EDID vendor "SEC", prod id 17474
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 17474
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 17474
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 17474
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 17474
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 17474
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Unloading synaptics
(II) AT Translated Set 2 keyboard: Close
(II) Unloading evdev
(II) Acer CrystalEye webcam: Close
(II) Unloading evdev
(II) A4TECH USB Device: Close
(II) Unloading evdev
(II) A4TECH USB Device: Close
(II) Unloading evdev
(II) Sleep Button: Close
(II) Unloading evdev
(II) Video Bus: Close
(II) Unloading evdev
(II) Power Button: Close
(II) Unloading evdev
Server terminated successfully (0). Closing log file.
gnome-session[1036]: DEBUG(+): Enabling debugging
gnome-session[1036]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/espionage:@/tmp/.ICE-unix/1036,unix/espionage:/tmp/.ICE-unix/1036
gnome-session[1036]: DEBUG(+): GsmShell: Not connected to the shell
gnome-session[1036]: DEBUG(+): GsmManager: setting client store 0x9fe2638
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x8062560
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x8062560
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x8062560
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x8062560
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x8062560
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
gnome-session[1036]: DEBUG(+): fill: *** Getting session 'gdm-shell'
gnome-session[1036]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1036]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1036]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1036]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1036]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1036]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1036]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1036]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
gnome-session[1036]: DEBUG(+): fill: *** Checking required components and providers
gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
gnome-session[1036]: DEBUG(+): fill: *** Done checking required components and providers
gnome-session[1036]: DEBUG(+): fill: *** Adding required components
gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
gnome-session[1036]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
gnome-session[1036]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
gnome-session[1036]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
gnome-session[1036]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
gnome-session[1036]: DEBUG(+): fill: *** Done adding required components
gnome-session[1036]: DEBUG(+): fill: *** Adding default providers
gnome-session[1036]: DEBUG(+): fill: *** Done adding default providers
gnome-session[1036]: DEBUG(+): GsmManager: GSM starting to manage
gnome-session[1036]: DEBUG(+): GsmManager: App startup summary
gnome-session[1036]: DEBUG(+): GsmManager: Phase INITIALIZATION
gnome-session[1036]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
gnome-session[1036]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
gnome-session[1036]: DEBUG(+): GsmManager: Phase PANEL
gnome-session[1036]: DEBUG(+): GsmManager: Phase DESKTOP
gnome-session[1036]: DEBUG(+): GsmManager: Phase APPLICATION
gnome-session[1036]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
gnome-session[1036]: DEBUG(+): GsmManager: starting phase INITIALIZATION
gnome-session[1036]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
gnome-session[1036]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
gnome-session[1036]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10acccb988624d95d5131971581226648300000010360001
gnome-session[1036]: DEBUG(+): GsmAutostartApp: started pid:1046
gnome-session[1036]: DEBUG(+): GsmManager: RegisterClient
gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581614780600000010360002 to session
gnome-session[1036]: DEBUG(+): uid = 120
gnome-session[1036]: DEBUG(+): pid = 1118
gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
gnome-session[1036]: DEBUG(+): GsmManager: RegisterClient 10acccb988624d95d5131971581226648300000010360001
gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581226648300000010360001 to session
gnome-session[1036]: DEBUG(+): uid = 120
gnome-session[1036]: DEBUG(+): pid = 1046
gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
gnome-session[1036]: DEBUG(+): App gnome-settings-daemon.desktop registered
gnome-session[1036]: DEBUG(+): GsmManager: ending phase INITIALIZATION
gnome-session[1036]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
gnome-session[1036]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
gnome-session[1036]: DEBUG(+): GsmManager: starting phase PANEL
gnome-session[1036]: DEBUG(+): GsmManager: ending phase PANEL
gnome-session[1036]: DEBUG(+): GsmManager: starting phase DESKTOP
gnome-session[1036]: DEBUG(+): GsmManager: ending phase DESKTOP
gnome-session[1036]: DEBUG(+): GsmManager: starting phase APPLICATION
gnome-session[1036]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
gnome-session[1036]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
gnome-session[1036]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10acccb988624d95d5131971581226572800000010360000
gnome-session[1036]: DEBUG(+): GsmAutostartApp: started pid:1133
gnome-session[1036]: DEBUG(+): GsmManager: ending phase APPLICATION
gnome-session[1036]: DEBUG(+): GsmManager: starting phase RUNNING
gnome-session[1036]: DEBUG(+): GsmPresence: adding idle watch
gnome-session[1036]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
gnome-session[1036]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=IsInhibited
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=IsInhibited
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
gnome-session[1036]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
gnome-session[1036]: DEBUG(+): GsmXSMPClient: Setting up new connection
gnome-session[1036]: DEBUG(+): GsmXSMPClient: New client '0xa00d0c0 []'
gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
gnome-session[1036]: DEBUG(+): GsmXSMPClient: Initializing client 0xa00d0c0 []
gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 []' received RegisterClient(10acccb988624d95d5131971581226572800000010360000)
gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581226572800000010360000 to session
gnome-session[1036]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xa00d0c0 [10acccb988624d95d5131971581226572800000010360000]'
gnome-session[1036]: DEBUG(+): GsmXSMPClient: Set properties from client '0xa00d0c0 [10acccb988624d95d5131971581226572800000010360000]'
gnome-session[1036]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
gnome-session[1036]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
gnome-session[1036]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
gnome-session[1036]: DEBUG(+): GsmXSMPClient: ProcessID = '1133'
gnome-session[1036]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
gnome-session[1036]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=Get
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=Get
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: connecting to address: unix:abstract=/tmp/gdm-greeter-bvcleLaw,guid=ee40278e3f4d9eb0fe19bee0000000f2
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling GetDisplayId
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Creating proxy for /org/gnome/DisplayManager/Display1
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling StartConversation
JS LOG: GNOME Shell started at Thu Oct 27 2011 19:43:43 GMT+0800 (PHT)
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Ready
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Ready (gdm-password)
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling BeginVerification
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultLanguageNameChanged
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultSessionNameChanged
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received DefaultSessionNameChanged (gnome)
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=InfoQuery
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received InfoQuery (gdm-password, Username:)
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling AnswerQuery
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=SelectedUserChanged
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received SelectedUserChanged (vic)
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultLanguageNameChanged
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultSessionNameChanged
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received DefaultSessionNameChanged (gnome)
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=SecretInfoQuery
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received SecretInfoQuery (gdm-password, Password: )
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling AnswerQuery
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Problem
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Problem (gdm-password, Authentication failure)
JS LOG: error: Authentication failure
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=ConversationStopped
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received ConversationStopped (gdm-password)
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling Cancel
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Reset
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Reset
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling StartConversation
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Ready
(gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Ready (gdm-password)
gnome-session[1036]: DEBUG(+): GdmSignalHandler: handling signal 15
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
gnome-session[1036]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x8062560
gnome-session[1036]: DEBUG(+): Got callback for signal 15
gnome-session[1036]: DEBUG(+): GsmManager: Logout called
gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1036]: DEBUG(+): GsmManager: requesting logout
gnome-session[1036]: DEBUG(+): GsmManager: ending phase RUNNING
gnome-session[1036]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
gnome-session[1036]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
gnome-session[1036]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.7
gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
gnome-session[1036]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
gnome-session[1036]: DEBUG(+): Caught signal 15, shutting down normally.
gnome-session[1036]: DEBUG(+): GdmSignalHandler: Done handling signals
gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received SaveYourselfDone(success = True)
gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1036]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xb5c11fc8, FALSE, 3, 9, 32771, 0)
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1036]: DEBUG(+): GsmManager: query end session complete
gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1036]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
gnome-session[1036]: DEBUG(+): GsmManager: starting phase END_SESSION
gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received SaveYourselfDone(success = True)
gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1036]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xb5c11fc8, FALSE, 3, c, 32771, 0)
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1036]: DEBUG(+): GsmManager: ending phase END_SESSION
gnome-session[1036]: DEBUG(+): GsmManager: starting phase EXIT
gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
gnome-session[1036]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]')
gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
gnome-session[1036]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
gnome-session[1036]: DEBUG(+): GsmManager: unable to find application for client - not restarting
gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa011e48
gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received CloseConnection
gnome-session[1036]: DEBUG(+): GsmManager: disconnect client
gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
gnome-session[1036]: DEBUG(+): GsmManager: in shutdown, not restarting application
gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa00d0c0
gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
gnome-session[1036]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000])
gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
gnome-session[1036]: DEBUG(+): GsmManager: in shutdown, not restarting application
gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa011cc8
gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
gnome-session[1036]: DEBUG(+): GsmManager: last client disconnected - exiting
gnome-session[1036]: DEBUG(+): GsmManager: ending phase EXIT
gnome-session[1036]: DEBUG(+): Unreffing manager
gnome-session[1036]: DEBUG(+): GsmManager: disposing manager
gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa045408
gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa045480
gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
(gnome-settings-daemon:1046): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
Window manager warning: Log level 16: gnome-shell: Fatal IO error 104 (Connection reset by peer) on X server :0.
Last edited by vic (2011-10-27 13:51:21)wonder wrote:
vic wrote:
wonder wrote:what's your user id?
when asked for uuid/uid?... I put 100. I thought any random number would do...
look in /etc/pam.d/gdm-password
in arch and in general >= 1000 are normal users, < 1000 system users
is that how it works? can i change it from 100 to 1000 or just make a new one?
anyways i'll look to it. -
CS5.5 upgrade or fresh install?
Does anyone know if CS5.5 will be a upgrade version we can install over 5, or will it need to be a fresh install?
thanksHello
Can't instal my CS5.5 without errors???
Have now tried to install on my CS5.5 Production Premium twice, and get the same error every time. Had previously installed 5.0.3 without any problems.
I have run the Clean Tool, so there was nothing left of 5.0.3, however, I get errors during installation (installation 2).
I've now reinstalled my OS Windows 7 64 Ultimate but with the same result (installation 3)?
Can't activate my Cuda with 5.5, worked fine in 5.03 thought?
Cant't log in with my Adobe ID under installation but it works fin in my browser thought?
Not fun at all :-(
/Mikael Bergstrom
Sweden
Log file
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 91 error(s), 2 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.5E5AC7P-1020rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Production Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\user\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\user\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
----------- Payload: {F194231A-13B9-45B9-9699-1B9AC6500263} Adobe Encore CS5.1 Library 5.1.0.0 -----------
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2710)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2726)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2728)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2732)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2736)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2738)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2740)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2742)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2746)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2748)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2752)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2754)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2756)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2770)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2772)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2774)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2776)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2778)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2784)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2794)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2796)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2798)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2800)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2802)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2804)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2814)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2816)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2818)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2820)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2822)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2826)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2836)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2838)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2842)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2844)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2848)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2854)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2858)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2860)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2864)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2866)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2870)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2898)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2900)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2902)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2904)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2906)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2908)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2910)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2912)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2914)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2916)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2918)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2920)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2922)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2924)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2926)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2928)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2938)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2958)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2970)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2972)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2980)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2982)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2992)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2994)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2998)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3054)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3066)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3084)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3094)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3118)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3156)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3158)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3160)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3162)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3164)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3166)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3168)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3172)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3174)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3176)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3184)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3186)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3196)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3198)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 3214)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash Player 10 ActiveX: Install failed
Log file 2
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 91 error(s), 2 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.5E5AC7P-1020rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Production Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\user\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\user\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
----------- Payload: {F194231A-13B9-45B9-9699-1B9AC6500263} Adobe Encore CS5.1 Library 5.1.0.0 -----------
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2710)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2726)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2728)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2732)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2736)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2738)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2740)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2742)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2746)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2748)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2752)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2754)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2756)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2770)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2772)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2774)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2776)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2778)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2784)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2794)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2796)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2798)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2800)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2802)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2804)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2814)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2816)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2818)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2820)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2822)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2826)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2836)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2838)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2842)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2844)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2848)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2854)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2858)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2860)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2864)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2866)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2870)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2898)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2900)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2902)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2904)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2906)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2908)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2910)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2912)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2914)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2916)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2918)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2920)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2922)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2924)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2926)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2928)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2938)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 2958) -
HP ENVY 17 Notebook PC Cannot Install Cyberlink PowerDirector on Fresh Install Windows 8.1
HP ENVY 17 Notebook PC
Product number: F5D54EA#ABU
Windows 8.1 Pro 64-bit
I replaced the original system drive with a SSD, fresh install of wndows 8.1 (not recovery disk), now I canot install Cyberlink PowerDirector downloaded from HP sp69386. During installation it fails with "This is not a valid HP drive, Setup will now abort" It obviously requires something to be available on the drive but I don't know what.
PowerDVD will install just fine.
Please don't mention a Recovery Install it's taken too long to arrive at this stage.
The question is what is the software looking for during installation to satisfy itself that this is a genuine HP laptop and can I replicate that on the SSD.Hi @Darren104
Welcome to the HP Support Community. I saw your post regarding the problem installing the Cyberlink PowerDirector software. As the PowerDirector software is DVD software I can't see how a new SSD would cause the “not a valid HP driver” if you had changed out your optical drive then maybe. I would recommend that you give us a call at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
[SOLVED] Choppy/Noisey audio on fresh install w/ PulseAudio
As the title states, I've got a fresh install, with audio being weird in certain applications. Most notably anything in wine (currently running Wine-multimedia from the aur) and VirtualBox VM's.
More interestingly, journalctl is being spammed with this message approximately 6 times per second, as I understand this process is somehow associate to Pulse:
Sep 01 21:26:03 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Things I've done so far:
-Kernel parameter change (posted as a suggested workaround):
processor.max_cstate=2
-ArchWiki steps for determining proper fragment size and count
-Disabled time-based scheduler for PulseAudio (tsched=0)
-Multiple different resampling methods
Any other ideas/suggestions to try? I'm thinking the Burst Limit and respawning is my big indicator here, but I don't know what to do to track this down.
The relevant information:
lspci:
00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13)
00:14.0 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers (rev 13)
00:14.1 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13)
00:14.3 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers (rev 13)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
01:00.0 IDE interface: Marvell Technology Group Ltd. Device 91a3 (rev 11)
02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
03:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 670] (rev a1)
03:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation GF106 [GeForce GTS 450] (rev a1)
04:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1)
06:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
07:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
ff:00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 0 (rev 02)
ff:02.3 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port Link 1 (rev 02)
ff:02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02)
ff:02.5 Host bridge: Intel Corporation Xeon 5600 Series QPI Physical 1 (rev 02)
ff:03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02)
ff:03.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder (rev 02)
ff:03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02)
ff:03.4 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers (rev 02)
ff:04.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control (rev 02)
ff:04.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address (rev 02)
ff:04.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank (rev 02)
ff:04.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control (rev 02)
ff:05.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control (rev 02)
ff:05.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address (rev 02)
ff:05.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank (rev 02)
ff:05.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control (rev 02)
ff:06.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control (rev 02)
ff:06.1 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address (rev 02)
ff:06.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank (rev 02)
ff:06.3 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control (rev 02)
lsusb:
Bus 004 Device 006: ID 0853:0111 Topre Corporation
Bus 004 Device 005: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 002: ID 1e7d:2dbe ROCCAT
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 005: ID 0bda:0184 Realtek Semiconductor Corp. RTS5182 Card Reader
Bus 003 Device 004: ID 17a0:0002 Samson Technologies Corp. Q1U dynamic microphone
Bus 003 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 003 Device 002: ID 2109:3431
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 2109:0810
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/etc/pulse/default.pa
# This file is part of PulseAudio.
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
nice-level = -15
; realtime-scheduling = yes
; realtime-priority = 5
exit-idle-time=0
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
resample-method = speex-float-10
; enable-remixing = yes
; enable-lfe-remixing = yes
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 1000000
; default-sample-format = s16le
; default-sample-rate = 44100
alternate-sample-rate = 96000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
default-fragments = 2
default-fragment-size-msec = 176
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
/etc/pulse/daemon.conf
# This file is part of PulseAudio.
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
nice-level = -15
; realtime-scheduling = yes
; realtime-priority = 5
exit-idle-time=0
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
resample-method = speex-float-10
; enable-remixing = yes
; enable-lfe-remixing = yes
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 1000000
; default-sample-format = s16le
; default-sample-rate = 44100
alternate-sample-rate = 96000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
default-fragments = 2
default-fragment-size-msec = 176
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
dmesg | grep hda
dmesg | grep hda
[ 4.860150] snd_hda_intel 0000:00:1b.0: irq 78 for MSI/MSI-X
[ 4.860188] snd_hda_intel 0000:03:00.1: Handle VGA-switcheroo audio client
[ 4.860217] snd_hda_intel 0000:03:00.1: irq 79 for MSI/MSI-X
[ 4.860246] snd_hda_intel 0000:04:00.1: Handle VGA-switcheroo audio client
[ 4.860274] snd_hda_intel 0000:04:00.1: irq 80 for MSI/MSI-X
[ 5.031793] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 5.031796] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.031797] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 5.031798] sound hdaudioC0D0: mono: mono_out=0x0
[ 5.031799] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 5.031800] sound hdaudioC0D0: inputs:
[ 5.031802] sound hdaudioC0D0: Front Mic=0x19
[ 5.031803] sound hdaudioC0D0: Rear Mic=0x18
[ 5.031804] sound hdaudioC0D0: Line=0x1a
[ 13.995429] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 14.078727] snd_hda_intel 0000:03:00.1: Too big adjustment 384
[ 14.156078] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 14.244513] snd_hda_intel 0000:03:00.1: Too big adjustment 384
[ 14.323028] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 14.410302] snd_hda_intel 0000:03:00.1: Too big adjustment 384
[ 14.488688] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 14.554972] snd_hda_intel 0000:03:00.1: Too big adjustment 384
[ 14.634007] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 14.702878] snd_hda_intel 0000:03:00.1: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 14.711805] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 14.779658] snd_hda_intel 0000:04:00.1: Too big adjustment 384
[ 14.857007] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 14.925334] snd_hda_intel 0000:04:00.1: Too big adjustment 384
[ 15.002750] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 15.072117] snd_hda_intel 0000:04:00.1: Too big adjustment 384
[ 15.149328] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 15.217777] snd_hda_intel 0000:04:00.1: Too big adjustment 384
[ 15.295568] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 15.366729] snd_hda_intel 0000:04:00.1: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
[ 15.558246] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 590.856485] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 590.944567] snd_hda_intel 0000:03:00.1: Too big adjustment 384
[ 591.022457] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 591.100307] snd_hda_intel 0000:03:00.1: Too big adjustment 384
[ 591.178181] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 591.255921] snd_hda_intel 0000:03:00.1: Too big adjustment 384
[ 591.333978] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 591.411790] snd_hda_intel 0000:03:00.1: Too big adjustment 384
[ 592.480173] sound hdaudioC1D0: hda-codec: out of range cmd 0:7:707:ffffffbf
[ 592.488048] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 592.565816] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 592.653695] snd_hda_intel 0000:04:00.1: Too big adjustment 384
[ 592.730549] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 592.810420] snd_hda_intel 0000:04:00.1: Too big adjustment 384
[ 592.887341] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 592.967190] snd_hda_intel 0000:04:00.1: Too big adjustment 384
[ 593.044065] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 593.123912] snd_hda_intel 0000:04:00.1: Too big adjustment 384
[ 593.201935] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 606.308377] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 606.396792] snd_hda_intel 0000:03:00.1: Too big adjustment 384
[ 606.474724] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 607.492101] sound hdaudioC1D0: hda-codec: out of range cmd 0:5:707:ffffffff
[ 607.549843] snd_hda_intel 0000:03:00.1: Too big adjustment 384
[ 607.627692] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 607.705604] snd_hda_intel 0000:03:00.1: Too big adjustment 384
[ 607.783452] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 607.861281] snd_hda_intel 0000:03:00.1: Too big adjustment 384
[ 607.940211] snd_hda_intel 0000:03:00.1: Too big adjustment 128
[ 608.016813] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 608.103904] snd_hda_intel 0000:04:00.1: Too big adjustment 384
[ 608.180714] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 608.260564] snd_hda_intel 0000:04:00.1: Too big adjustment 384
[ 608.337481] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 608.417331] snd_hda_intel 0000:04:00.1: Too big adjustment 384
[ 608.494165] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 608.574057] snd_hda_intel 0000:04:00.1: Too big adjustment 384
[ 608.651660] snd_hda_intel 0000:04:00.1: Too big adjustment 128
[ 769.987913] sound hdaudioC1D0: hda-codec: out of range cmd 0:4:707:ffffffbf
Interesting journalctl tidbits
Sep 01 21:07:13 xaeropc kernel: snd_hda_intel 0000:03:00.1: Too big adjustment 384
Sep 01 21:07:13 xaeropc kernel: snd_hda_intel 0000:03:00.1: Too big adjustment 128
Sep 01 21:07:13 xaeropc kernel: snd_hda_intel 0000:03:00.1: Too big adjustment 384
Sep 01 21:07:13 xaeropc kernel: snd_hda_intel 0000:03:00.1: Too big adjustment 128
Sep 01 21:07:13 xaeropc kernel: snd_hda_intel 0000:03:00.1: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
Sep 01 21:07:13 xaeropc kernel: snd_hda_intel 0000:04:00.1: Too big adjustment 128
Sep 01 21:07:13 xaeropc kernel: snd_hda_intel 0000:04:00.1: Too big adjustment 384
Sep 01 21:07:13 xaeropc kernel: snd_hda_intel 0000:04:00.1: Too big adjustment 128
Sep 01 21:07:13 xaeropc kernel: snd_hda_intel 0000:04:00.1: Too big adjustment 384
Sep 01 21:07:13 xaeropc kernel: snd_hda_intel 0000:04:00.1: Too big adjustment 128
Sep 01 21:07:14 xaeropc kernel: snd_hda_intel 0000:04:00.1: Too big adjustment 384
Sep 01 21:07:14 xaeropc kernel: snd_hda_intel 0000:04:00.1: Too big adjustment 128
Sep 01 21:07:14 xaeropc kernel: snd_hda_intel 0000:04:00.1: Too big adjustment 384
Sep 01 21:07:14 xaeropc kernel: snd_hda_intel 0000:04:00.1: Too big adjustment 128
Sep 01 21:07:14 xaeropc kernel: snd_hda_intel 0000:04:00.1: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
Sep 01 21:07:14 xaeropc pulseaudio[1317]: ALSA woke us up to read new data from the device, but there was actually nothing to read!
Sep 01 21:07:14 xaeropc pulseaudio[1317]: Most likely this is a bug in the ALSA driver 'snd_usb_audio'. Please report this issue to the ALSA developers.
Sep 01 21:07:14 xaeropc pulseaudio[1317]: We were woken up with POLLIN set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail.
Sep 01 21:07:14 xaeropc pulseaudio[1317]: ALSA woke us up to write new data to the device, but there was actually nothing to write!
Sep 01 21:07:14 xaeropc pulseaudio[1317]: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers.
Sep 01 21:07:14 xaeropc pulseaudio[1317]: We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail.
Sep 01 21:07:14 xaeropc kernel: snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Sep 01 21:17:09 xaeropc rtkit-daemon[1328]: Successfully made thread 3191 of process 3191 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -15.
Sep 01 21:17:09 xaeropc rtkit-daemon[1328]: Supervising 2 threads of 2 processes of 1 users.
Sep 01 21:17:09 xaeropc pulseaudio[3191]: [pulseaudio] pid.c: Daemon already running.
Sep 01 21:19:11 xaeropc sudo[3202]: xaero : TTY=pts/0 ; PWD=/home/xaero ; USER=root ; COMMAND=/usr/bin/nano /etc/pulse/daemon.conf
Sep 01 21:19:11 xaeropc sudo[3202]: pam_unix(sudo:session): session opened for user root by xaero(uid=0)
Sep 01 21:19:30 xaeropc sudo[3202]: pam_unix(sudo:session): session closed for user root
Sep 01 21:19:49 xaeropc rtkit-daemon[1328]: Successfully made thread 3210 of process 3210 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -15.
Sep 01 21:19:49 xaeropc rtkit-daemon[1328]: Supervising 1 threads of 1 processes of 1 users.
Sep 01 21:19:50 xaeropc kernel: sound hdaudioC1D0: hda-codec: out of range cmd 0:4:707:ffffffbf
Sep 01 21:19:53 xaeropc rtkit-daemon[1328]: Successfully made thread 3221 of process 3221 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -15.
Sep 01 21:19:53 xaeropc rtkit-daemon[1328]: Supervising 2 threads of 2 processes of 1 users.
Sep 01 21:19:53 xaeropc pulseaudio[3221]: [pulseaudio] pid.c: Daemon already running.
Sep 01 21:19:53 xaeropc rtkit-daemon[1328]: Successfully made thread 3223 of process 3223 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -15.
Sep 01 21:19:53 xaeropc rtkit-daemon[1328]: Supervising 2 threads of 2 processes of 1 users.
Sep 01 21:19:53 xaeropc pulseaudio[3223]: [pulseaudio] pid.c: Daemon already running.
Sep 01 21:23:10 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:10 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:12 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:13 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:13 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:13 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:13 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:13 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
Sep 01 21:23:13 xaeropc rtkit-daemon[1328]: Warning: Reached burst limit for user '1000', denying request.
... for about 2 minutes, then everything recycles.
Last edited by Xaero252 (2014-09-03 10:04:54)Filter the comments out of your PA configuration with 'grep -v \# configuration_file'. Instead of simply lspci run
lspci -vnn | grep -A1 -i audio;
#and
aplay -lL;
Please correct/update your post.
Also provide the output of speaker-test with PA killed, so that you hear sound. It should show the current buffer and period ranges. Should you have multiple sound cards, state which one you are using as default.
Edit: Added example to filter comments out.
Last edited by emeres (2014-09-02 10:01:10) -
[Solved] X11 won't start after fresh install
Hihi!
I've been using Debian for quite some time now but I want to switch to Arch. My notebook is fairly modern and this doesn't mix well with Debian and as such my dGPU is basically unusable. My preferred method of installing Debian is to start headless so I felt quite at home with Arch and got through the install just fine, but I'm having problems launching Openbox among other hardware related issues. I spent yesterday googling and attempting fixes but came up with nothing, so I had to reinstall Debian as I was counting on having a usable computer at the end of the day. I did write down the messages I was getting though, hopefully they are enough to diagnose the issue. My hardware:
AMD A10-5750M (8650G graphics)
AMD Radeon 8970M 2GB
The kernel was the one in the very latest install snapshot (3.12-9 or something)
The first thing I noticed after booting into the fresh install was a warning along these lines
[drm:r600_dma_ring_test] radeon: ring 3 test failed
I ignored it, and preceeded to install the following packages
xorg-server
xorg-utils
xorg-xinit
mesa
xf86-video-ati
openbox
openbox-themes
other things related to the UI I wanted
The ring 3 test warning still occured on reboot after installing X and the radeon drivers. Again I ignored it. My .xinitrc was simply exec openbox-session
I ran startx and it failed, and got a bunch of errors that began right after a reference to "radeon" and the kernel. My xorg log did not get far at all. In fact the last lines were
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) config/udev: Adding drm device (/dev/dri/card1)
And that was literally the end of the log. This is clearly a GPU/driver issue, probably with the 8970M as card1 seems to be the last line? Any help is appreciated
edit: This is the same process I use to install Debian, and using this exact same kernel (plus the Debian patches) I can start X just fine. my dGPU is unusable with the FOSS drivers through as there is no glamor support in Debian. I get segfaults whenever I launch something with DRI_PRIME=1 after setting the 8970M as the offload provider
Last edited by remyze (2014-02-09 04:02:04)Ok I installed fresh and had the same issues as last time. With KMS early start I still have the same problems launching X and I still have the ring 3 test error (it just appears earlier).
There is nothing pure text in /var/log, I don't know if theres a way to use systemd with wgetpaste, so I took a picture that is hopefully not to difficult to read. I tried to sharpen it up a bit in GIMP.
*see pastebin below*
I also noticed that I get that ring 3 error even when I boot up the Arch installer via USB. I wonder if I should try an older image with an older kernel?
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by remyze (2014-02-09 03:30:24)
Maybe you are looking for
-
How can i delete pictures from iCloud?
i need to delete some pictures from my icloud back up, but i can find a way to do it , can someone show me how to, with out erasing the whole back up?
-
Calling an infoset from an ABAP program
Hi, How can I call an infoset with ABAP code in order t build a report based on a program? Thanks, Tal
-
ActiveX Viewer on IE displaying grey screen
We are running crystal enterprise XI rel2 with FP4.7. When running reports via infoview or the crystal management console, reports display. but when running the reports via a java app through the webcompadapter, the reports only return a grey screen.
-
Cannot connect to Graphite ABS with 10.4.7
I recently was given an Graphite Airport Base Station and wireless card. I inserted the card into my iBook G3 800mgz. I reset the ABS using my crossover cable anduploaded the proper software. I then configured the ABS to my ISP's require settings. Ho
-
Stateful Serializing/Deserializing Problem in clusters
I'm using a stateful session bean that hold some values. When i try to test replication in clusters, the bean is serialized and deserialized from one node to other. That is ok. The problem is when the state is too big (actuallly when the state is big