Cfchart time units in y-axis

Hi All. Does anyone know how can display time units is the
y-axis in the format of hh:mm:ss? Also I'd like to show pace units
-- for example 10m 30s/mile -- in the y-axis also. This is for a
fitness website and I've been using webcharts3d designer to try to
create my own custom style with little success. Any advice or help
would be appreciated.
Thanks in advance!

Are you sure you mean the y-axis and not the x-axis?

Similar Messages

Error " is not a time unit" while updating table that is Copy of CATSDB

Hi,
We have created a new table which is a copy of CATSDB and has some more Fields in it. While inserting records to the table, it is throwing the error saying " is not a time unit". Can you please provide some info on this ?
This is a complete custom Table that reuses all the Includes of CATSDB table and some more columns.
Regards,
Srikanth.

Thanks for the Inputs. The issue was I do not have access to update these tables. Now I got it. Thank you.
Regards,
Chiranjeevi.

Problem: XYGraph with units in one axis in LV7.0

When I bundle one array with units (length) and another without units
together into a cluster and wire it to an XY Graph, the unit label
shows up correctly at the lower-right corner of the X axis.
But when I rescale the unit by changing the unit label (from nm to
uin), the Y axis rescales as well! Furthermore, if I change the unit
label back to nm, the Y axis values to not revert back!
It seems that there is a problem when units are in only one axis of an
XY Graph. (I tried with units on both axis and that seems to work
fine).
Any solution/workaround?
Thanks,
germ Remove "nospam" to reply

In article <[email protected]>,
Philip C. wrote:
> Hi Germ,
>
> Please post the VI that shows this behaviour. Then it will be easier
> for me to troubleshoot.
>
> Thanks!
>
> Philip C.
Philip, I tried to post one, but there's something wrong with my ISP or
some other problem, so I cannot post.
But it's very easy to create: Make two array controls, one for the X
values and one for the Y values. Assign the unit nm to the X axis, and
leave the Y array without units. Make a new XY Graph control.
On the block diagram, bundle the two arrays and connect them to the XY
graph. Go back to the front panel and make "unit" visible in the
graph. A unit label will appear near the lower-right corner. Change m
to nm
Enter a couple of values in each to the two arrays.
Execute the VI. The points will plot on the graph. Now change the unit
lablel from nm to uin on the graph and then change it back. Watch the Y
axis go berserk.
germ Remove "nospam" to reply

Relative Time Scale for X-Axis when creating a Line Graph in CS3?

Is there a way to get the APPROPRIATE RELATIVE scale for the X-Axis (Category) when you're using dates?
Example:
If this is my data set:
                    Group A          Group B
01/03/99                1                5
01/04/99                11                3
01/05/99                6                12
11/27/07                63                54
If I plot this in Xcel, by default, each date (x-axis) will be spaced the same distance apart. However, there is a checkbox to "time-scale" the X-Axis which will place the dates relative to one another. In other words, if we're talking about a bar graph, the first three bars would be close together on the left side of the chart, and the 4th bar would be waaaaaay on the right side of the graph.
So, below, if 'x' is a bar, I keep getting this in CS3:
x     x     x     x
I want to get this:
x x x             x
Get it?

Is there a way to get the APPROPRIATE RELATIVE scale for the X-Axis (Category) when you're using dates?
Example:
If this is my data set:
                    Group A          Group B
01/03/99                1                5
01/04/99                11                3
01/05/99                6                12
11/27/07                63                54
If I plot this in Xcel, by default, each date (x-axis) will be spaced the same distance apart. However, there is a checkbox to "time-scale" the X-Axis which will place the dates relative to one another. In other words, if we're talking about a bar graph, the first three bars would be close together on the left side of the chart, and the 4th bar would be waaaaaay on the right side of the graph.
So, below, if 'x' is a bar, I keep getting this in CS3:
x     x     x     x
I want to get this:
x x x             x
Get it?

Can we configure the new time unit in invoicing plan in OM7R

SAP has provided the four time units in Define Rules for Date Determination (OM7R) which are 1- Day, 2-Week, 3-Month and 4-Year, I wanted to have the new time unit like "Quarterly" and "Half Yearly".
Would somebody guide me on this how to get these new value?

Hi ,
As per SAP standard there should be 4 units ,.....Time unit Day ,Week ,Month & Year..........................we cannot maintain other units..
Thanx.........

Time Unit of Measure for CATS

Hello guys
In the table CATSDB I find in the field MEINH, "CUR" value, instead of (as I have always found on other projects) u201CHu201D (hours); and I cannot change it.
So in the report CATS_DA, I see u201CCURu201D and not u201CHu201D.
Can you tell me how can I change it? What was the transaction that charged / changed it?
Thanks
Salvo50

Greetings Salvatore,
Have you gotten around that issue?
I've created a unit G which was identical to "Hour" except the commercial unit, technical unit, ISO code and description. Now this unit was somehow populated into the CAT2 records. I can't change this in CAT2 detail screen.
After I removed the unit G, I would not be able to save CATS, because of an error:
Error message BM302 - Unit *** is not created in language EN
or
Error message BM305 - Unit G is not created in language EN
After I re-created G as a no-dimension unit, I would get an error when trying to amend CATS
"Unit is not allowed" or "Units with different dimensions can't be converted".
I amended some of the entries in CAT2 manuallysetting G again as a time unit, but not all of them. Is there a report or transaction to change the unit on existing records en masse? How did you resolve this?
Is it a known issue for the fuction module CATS_GET_UNIT_HOUR to pick up the first unit with the dimension "TIME" from T006?

PK07 AC: Average consumption per time unit

Dear guru ,
in Kanban Calculation (PK07) with this below formula how the system determine the AC
Average consumption per time unit ?
6.quantity per kanban i*
Quantity per kanban = RT * AC
SF
AK - C
7.
NK: Number of kanbans
CONT: Quantity per kanban
RT: Replenishment lead time per kanban
AC: Average consumption per time unit (from dep.reqmts)
SF: Safety factor (proposed value 1)
C: Constant (proposed value 1)
Thanks.

Not answered.

Time display on x-axis for front panel instead of data points

What do I need to change or add in my block diagram so that on the waveform graph the time will be on the x-axis instead of the data points. I am running this VI on a pda for some testing and I would rather get the time on the horizontal axis. Im also using an NI USB-6008, windows xp and Labview 8.2
Thanks
Attachments:
blockdiagram.JPG ‏158 KB
frontpanel.JPG ‏94 KB

And since you are sending it an array of doubles rather than an array of waveforms, there is no timin information associated with it. It will assume 1 sample per second. If your acquisition is faster than that, you will need to set the dT of the graph or the scaling multiplier factor of the X scale of that graph.
(PS, it is always a good programming practice to show the labels for all the terminals on your block diagram and assign the terminal a name.)
Message Edited by Ravens Fan on 09-15-2009 09:28 PM

Current time in the x-Axis

Hi everyone,
I have some problems putting a waveform together that shows the current time in the x-Axis.
I tried to do it with “timestamp” and “build waveform” but it didn’t work out. All I need is some values over the current time x-Axis.
All it shows in my waveform is the time since 1904, like it always does!
Probably a silly question, but can anyone help me out, maybe with an example VI?
TNX

Did you also set dt?
If I set some y-values, dt = 1 and x0 to current time, I get different times on the x-axis.
I attach a screenshot, that shows this.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Time.png ‏36 KB

System time in the X-axis

how to set system time in the X-axis for waveform chart or XY graph?

Hi such,
See the attachment.
Also look at Function pallette>> programming>>Timing
Thanks as kudos only
Attachments:
systemtime.vi ‏13 KB

Define Time Units - cProjects 4.0

I have defined two time units in cProjects - Hours and Days. I have set the unit of measurement for time as 'Hours' in my project type.
When I set the unit of Task Work or Required Capacity as 'Days', I see the system converting a day for 24 hours under Evaluations.
Is there a way I can change this such that 1 day is equal to 8 hours, say??
Thanks and Regards...

Time recording in cProjects is a new feature effective version 4.0.
cProjects 4.0 is released only for ECC 6.0, CRM 5.0 and Netweaver 2004S. For customers having lower version, consultation is available from SAP. Please kindly refer to the note 900310. I hope this helps.

Short dump will happen because duration time unit is wrong.

Hello,
I maintained breakdown duration time unit as "TST" which is created in CUNI. System can not convert it to "S", so system will dump when I tried to access this maintenance order. So I want to change this time unit "TST" to "S" or "h". I tried to make this change in SE16 table VIQMEL, but failed. Could anybody tell me how to make this change?
Thank you.

Dear Stephen,
have you changed all unit measurement? VIQMEL is table for notification header and you said that you cannot access maintenance order. so, i think you should check table AUFK, AFKO and also AFIH. for unit measurement in order
Rgds
Edited by: Johan Lief on Apr 27, 2010 5:49 AM

Logistics InfoSys: Time unit field DFZEH

Hello,
In infostructures S021, S022, S023 and S024 the time unit field DFZEH is set to DAY as SAP standard.
In IMG tc MCRG it seems to be possible to change this time unit which should be useful for short lead times and execution times(field MCPPCUST-DFZEH). Coincidence that field names are the same?
After running statistical update of S023 the unit is still DAY.
I don't see anything in the front end standard analysis that it is possible to change time unit. (This is possible for currency.)
I have tried different options but nothing gives me a result that I expect.
Does somebody know the effects of this IMG setting??
Thank you!
Best regards,
Tor Holter
Oslo, Norway

In LIS there are fields available for the exact times but those fields are not present in the standard Inforstructure. The solution is to create new ones (it is not possible to copy certain infostructure).
These fields are part of BW/BI extract.

Anychart issue with a time value on y-axis

We are trying to plot a date on the x-axis and a time (HH:MI:SS) on the y-axis. Having difficulty on how to do the time on the y-axis. We are using anychart 5.1.2. Using SQL to pull data from an Oracle Database table and into a Series. The sql part errors out wanting the value in numeric not in datetime format.
Does anyone know of a way to accomplish this?
Thanks,
Lou D.

Hi,
Do you want to display values in Y-axis & Regions in X-axis right ?
Once check the properties of the chart, see primary value Axis Is value or some thing else ? once check that and also check series,legend ,labels are checked Visibilty option. One more thing you can select there X-axis & Y-axis as Promary or secondary things.Once go thourgh All these options by Chart Overview.
Regards
Pcrao.

How can I modify the High Speed Data Reader VI to show the time information in x-axis?

I am just a beginner learning the LabVIEW programming currently.
I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
However, when I read my data by using the High Speed Data Reader VI, it doesn't show its time information in the graph.
How can I modify the High Speed Data Reader VI to show the time information in x-axis?
I hope you can explain easily because I am a beginner.

Format the x axis to either absoulte or relative time.
You can do this by right clickingo n the graph and selecting x axis then formatting from the menu.
Thanks,
Naresh

Cfchart time units in y-axis

Similar Messages

Maybe you are looking for