Cfdocoument with a header question

When using cfdocument and cfdocumentitem type header, there
is about and inch of white space between the header and the body.
If I make the topmargin smaller the header is scaled to fit and
still leaves the inch of white space. I've tried many different
padding and margin attributes for the body and tables but it
doesn't change the space between the header and the body.
Does anyone know how to remove the white space?
Thanks in advance for any help!

You Rock, That worked I have been working on this for almost 2 full weeks. Thank you soooooo much. Do you know if there is a script to make the windows open in a certain way, Example, always make the search window open on the left and arrange the windows. Just wondering, I am trying to make a cd for training and need it to be as simple as possible so I don't get a thousand calls. Either way if not you were a huge help. Thank you again.
Dusty

Similar Messages

AC Power cord with duck head question, difference?

Just never understood, you've got the white square with the cord that goes to the MBP (which has the light on it), then you get the extra "duck head" cord. Is there a reason to use it other than just extending the reach of your power cable? What is the purpose of three plug cord vs just the two prong attachment on the white block? Is it to ground? I only use the white brick with cord into a surge protector (that is grounded). Just curious as to the reasoning....

powerbook1701 wrote:
so what you are saying is that it is better to use the extra "duckhead" cord from the white power square thing regardless..
Based on experience, I use the 3-prong cord all the time. The reason is that I used to leave the 2-prong hinged duckhead attached, and what happened is that the prong hinge inside wore out and started arcing and failing, and eventually died in hazy smoke and brown scorched plastic. Another duckhead I had for an old iPod USB adapter was so intermittent you had to have it just so or the charge light would not come on, and it was out of warranty so Apple wouldn't replace it. I've concluded that the hinged duckhead is far less reliable simply because it has a moving part. And the way plugs get used, you're always straining that poor little prong hinge that your entire power supply is dependent on, by hanging that big power brick from it, and of course it gets tugged and torqued until one day...
The extension cord never gives me trouble; since I usually don't need the whole cord I tie up a portion of the length. I keep the 2-prong in my bag for the rare times I need to plug into an old ungrounded outlet.

When my desktop (Mac Power 5) starts a folder comes up with 2 heads which changes to a question mark. Does anyone know how to fix this.?

My Husband turned his desktop off without shutting down now When my desktop (Mac Power G5) starts up a folder comes up with 2 heads which changes to a question mark. Does anyone know how to fix this.?

Step 1- Try booting to Startup Manager by holding Option/Alt key.
Select the boot source and click the right arrow.
Once booted, open System Preferences and select the desired boot volume.
Replacing the PRAM battery is likely wise if the machine keeps forgetting it's boot source.
If that doesn't work,
Step 2- Boot holding a mouse click, insert the OS X install disc and hold C to boot to the install disc.
Once booted, open Disk Utility and "Repair Disk" on the boot drive.
Once done, reboot normally.
More:
http://support.apple.com/kb/TS1440

TS1440 iMac freezes, no choice but to hard shutdown, turn back on, white screen with folder and question mark appears

Hi,
so my iMac (it's not the most recent iMac if it makes any difference, and I'm running mountain lion 10.8.3) often freezes and I do a hard shutdown as I cannot force quit the applications or click on the apple in the top left to shut it down. When I come to turn it back on, I'm greeted with a white screen, in the middle of which is the dreaded folder with the flashing question mark in it. I've noticed that just before a freeze occurs, it starts running slowly and if I try going onto Facebook for example, it says that it cannot connect to facebook.com despite the internet connection being fine as I can browse things on Google. I have also noticed that before a freeze, in Finder, in All My Files, no files show. I went through this http://support.apple.com/kb/TS1440 and the problem still persists. Sometimes it does load fine if I shut it down again but when I eventually open up safari, if I had been on youtube for example, it will reload the page from a few videos before and not the one I was on when it actually froze.
Any help would be hugely appreciated,
Thanks
Side note: When it says I must choose a community in order to post this, it only gives me a choice of 3 which are Mac OS X v10.4 Tiger, v10.5 Leopard, v10.6 Snow leopard, so apologies if this is posted in the wrong place - is there any way to get it moved to the correct place?

Yes,easy fix but difficult to buy,think you can get them from the states (off the top of my head about £15).When you go to the apple store,tell yhem what you suspect and they will test if it is the cable or if its the hard drive,dosn't take that long and it's free.If you know what to do you can take the back off and with strong magnifying glass you might be able to see the fray look at the bend of the cable.

I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?

I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?

You need to use the computer's install disks to repair the hard drive or install a new OS.
(58033)

IPod Touch no longer working with car Head Unit since update

Hi there, I have a problem with using my iPod Touch with my car's head unit.
I've been using my iPod Touch with the Alpine IDA X001 Head unit fitted in my car for the last 3 months without any problems, however I installed the latest software update for the Touch (v4.0) and now the head unit connects and then says no USB device. At first I thought it was the cable as the cable supplied with the head unit is pretty fragile, so I've replaced it with a new one but it still doesn't work.
I've tested with my iPod Nano and it works perfectly so its not a problem with the head unit or lead (I plugged the Touch in and it didn't work, plugged the Nano in and worked perfectly and then plugged the Touch in and didn't work).
Can anyone help or is it gonna be a case of Restoring the iPod Touch back to factory settings ????

I was also having this problem with my Kenwood car stereo. I went into the store and they did a complete restore. I didn't think it worked but the next time I plugged it into my usb to connect with my car stereo it worked. So you might try doing a restore.

My MBP (mid 09)/ folder with a flashing question mark.

My MBP (mid 09) is showing a folder with a flashing question mark. I tried the usual things like PRAM Reset and booting with a external drive. I also changed the hard drive and could use it as a external drive on an other Mac - so this seems to work. Another drive could not be used too. The Apple Hardware Test does not work - my Superdrive is broken. Any ideas?

https://discussions.apple.com/docs/DOC-3046
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

How to download the output of a report along with column header

Hi,
Could someone please tell me on how to download the output of a report along with column header to .txt format. A download option needs to be given to the user using physical and logical file names .The report basically contains header details and item details and requirement is to download the same format into an .txt format.

Hello,
Try this FM:
Data: being of itab occurs 0,
matnr like mara-matnr,
maktx like makt-maktx,
end of itab.
data:begin of fld_tab occurs 0,
fld_name(20),
end of fld_tab.
fld_tab = 'Material'.
append fld_tab.
fld_tab = 'Material Desc'.
append fld_tab.
CALL FUNCTION 'WS_DOWNLOAD'
   EXPORTING
        BIN_FILESIZE            = ' '
        CODEPAGE                = ' '
         FILENAME                = 'C:\1.txt '
         FILETYPE                = 'DAT'
        MODE                    = ' '
        WK1_N_FORMAT            = ' '
        WK1_N_SIZE              = ' '
        WK1_T_FORMAT            = ' '
        WK1_T_SIZE              = ' '
        COL_SELECT              = ' '
        COL_SELECTMASK          = ' '
        NO_AUTH_CHECK           = ' '
   IMPORTING
        FILELENGTH              =
     TABLES
          DATA_TAB                = itab
          FIELDNAMES              = fld_tab
   EXCEPTIONS
        FILE_OPEN_ERROR         = 1
        FILE_WRITE_ERROR        = 2
        INVALID_FILESIZE        = 3
        INVALID_TYPE            = 4
        NO_BATCH                = 5
        UNKNOWN_ERROR           = 6
        INVALID_TABLE_WIDTH     = 7
        GUI_REFUSE_FILETRANSFER = 8
        CUSTOMER_ERROR          = 9
        OTHERS                  = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Naimesh

At startup I get grey screen and a folder with a flashing question mark. How do I reset my MacBook Pro to the manufacture defaults?

At startup I get grey screen and a folder with a flashing question mark. How do I reset my MacBook Pro to the manufacture defaults?

Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
(113954)

Upgraded to ios6 on my iphone 3gs and email is not displaying images. It has a blue box with a blue question mark inside

I just upgraded to ios 6 on my iphone 3gs and I noticed on a couple of incoming emails that the images and information are not being displayed. There is a blue square box with a blue question mark inside. I already tried to press the home key and power key to restart. The email still does not display correctly. I went on my laptop to retrieve that same email and I was able to see the graphics and information, so the problem is on the iphone. I received two emails like this, so I'm missing all the important information. I also tried to retrieve my email through the internet browser and I still have the same problem. Any suggestions? Thanks!

I forgot to mention that I have an Ipad 2 also and I can view the email information on there also. I received an email from Party city and it said to click here to print out the coupon. So I click the coupon and there is the little blue box with the question mark. This is the first time I've seen this happen, as I have printed out the coupons before. Maybe it has to do with the IOS6 update, because this just started to happen right after the update.

With header line & with out header line ?

what is difference between with header line & without header line ?

When you create an internal table object you can also declare a header line with the same name. You can use the header line as a work area when you process the internal table. The ABAP statements that you use with internal tables have short forms that you can use if your internal table has a header line. These statements automatically assume the header line as an implicit work area. The following table shows the statements that you must use for internal tables without a header line, and the equivalent statements that you can use for internal tables with a header line:
Operations without header line
Operations with header line
Operations for all Table Types
INSERT <wa> INTO TABLE <itab>.
INSERT TABLE ITAB.
COLLECT <wa> INTO <itab>.
COLLECT <itab>.
READ TABLE <itab> ... INTO <wa>.
READ TABLE <itab> ...
MODIFY TABLE <itab> FROM <wa> ...
MODIFY TABLE <itab> ...
MODIFY <itab> FROM <wa> ...WHERE ...
MODIFY <itab> ... WHERE ...
DELETE TABLE <itab> FROM <wa>.
DELETE TABLE <itab>.
LOOP AT ITAB INTO <wa> ...
LOOP AT ITAB ...
Operations for Index Tables
APPEND <wa> TO <itab>.
APPEND <itab>.
INSERT <wa> INTO <itab> ...
INSERT <itab> ...
MODIFY <itab> FROM <wa> ...
MODIFY <itab> ...
Using the header line as a work area means that you can use shorter statements; however, they are not necessarily easier to understand, since you cannot immediately recognize the origin and target of the assignment. Furthermore, the fact that the table and its header line have the same name can cause confusion in operations with entire internal tables. To avoid confusion, you should use internal tables with differently-named work areas.
The following example shows two programs with the same function. One uses a header line, the other does not.
With header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1
WITH HEADER LINE.
DO 4 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
INSERT TABLE ITAB.
ENDDO.
ITAB-COL1 = 2.
READ TABLE ITAB FROM ITAB.
ITAB-COL2 = 100.
MODIFY TABLE ITAB.
ITAB-COL1 = 4.
DELETE TABLE ITAB.
LOOP AT ITAB.
WRITE: / ITAB-COL1, ITAB-COL2.
ENDLOOP.
Without header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA: ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1,
WA LIKE LINE OF ITAB.
DO 4 TIMES.
WA-COL1 = SY-INDEX.
WA-COL2 = SY-INDEX ** 2.
INSERT WA INTO TABLE ITAB.
ENDDO.
WA-COL1 = 2.
READ TABLE ITAB FROM WA INTO WA.
WA-COL2 = 100.
MODIFY TABLE ITAB FROM WA.
WA-COL1 = 4.
DELETE TABLE ITAB FROM WA.
LOOP AT ITAB INTO WA.
WRITE: / WA-COL1, WA-COL2.
ENDLOOP.
The list, in both cases, appears as follows:
1 1
2 100
3 9
The statements in the program that does not use a header line are easier to understand. As a further measure, you could have a further work area just to specify the key of the internal table, but to which no other values from the table are assigned.
Internal table with header line
you can use anywhere except obkect oriented concept.
Internal table without header line :
You should use in Object oriented concept..
Always try to use without header line,performance point of view it is best..
Example :
Without header line.
Structure
types : begin of ty_itab ,
matnr type mara-matnr,
end of ty_itab.
Internal table
data i_itab type standard table of ty_itab .
Work area
data wa_itab like line of i_itab
With header line
data : begin of i_itab occurs 0,
matnr like mara-matnr,
end of i_itab
itab with header lines are obsolete, anyway it will work but not recommended. instead use work area or more effiecient is field symbols. so donot use itab with header line.
i will explain use of itab w/o header line.
Data: itab1 type standard table of mara with header line occurs 0,
itab2 type standard table of mara,
wa_itab2 type mara.
loop at itab1.
"This will work fine.
endloop.
loop at itab2.
"This will give erro that itabd does not hav workarea
endloop.
"so write
loop at itab2 into wa_itab2.
"This will work
endloop.
<b>The difference between
whih header line and with out heater line of internal table.
ex:-
a) Data : itab like mara occurs 0 with header line.
b) Data: itab like mara occurs 0.
-While adding or retrieving records to / from internal table we have to keep the record temporarily.
-The area where this record is kept is called as work area for the internal table.
-The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
-Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
a) Data : itab like mara occurs 0 with header line.
table is with header line
b) Data: itab like mara occurs 0.
table is without header line</b>
regards,
srinivas
<b>*reward for useful answers*</b>

Calling Web Service with SOAP header from BPEL

Hi,
I am calling a web service (with header information) from BPEL. In the Invoke activity, i created a header variable to pass the header information.
But, when i test the BPEL service, invoke activity fails because the header information is not being passed.
Below is the error message (copied from clipboard).
+<messages><input><Invoke_1_getsubinfo_InputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="parameters"><getsubinfoElement xmlns="http://ws/its/tabs/webservices/SingleRowWS/SingleRowWS.wsdl">+
+<pSubnoin>+
+<insubno>12345678</insubno>+
+</pSubnoin>+
+</getsubinfoElement>+
+</part></Invoke_1_getsubinfo_InputVariable></input><fault><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke:+
start fault message:+
Internal Server Error (Caught exception while handling request: javax.xml.rpc.JAXRPCException: Not authenticated user)+
*:end fault message*</summary>
+</part></bindingFault></fault></messages>+
As said, no header information is visible in the Invoke activity.
Please provide help for the above issue.
-MJ

Hello Patrick,
Thanks for the response. I am using normal assign activity to assign values to the header variable as shown below. HeadMT is the header variable which is passed in the invoke activity.
+<assign name="Assign_Header">+
+<copy>+
+<from expression="'tkl12'"/>+
+<to query="/ns1:LOGIN_INFO/ns1:USER_NAME" variable="*HeadMT*"+
part="payload"/>
+</copy>+
+<copy>+
+<from expression="'tkl123'"/>+
+<to query="/ns1:LOGIN_INFO/ns1:PASSWORD" variable="*HeadMT*"+
part="payload"/>
+</copy>+
+<copy>+
+<from expression="'TKL'"/>+
+<to query="/ns1:LOGIN_INFO/ns1:CHANNEL_ID" variable="*HeadMT*"+
part="payload"/>
+</copy>+
+</assign>+
The expected input by the web service is as below with the header information highlighted.
+<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://ws/webservices/RowWS/RowWS.wsdl">+
+*<soap:Header>*+
+*<ns1:LOGIN_INFO>*+
+*<ns1:USERNAME>tkl12</ns1:USERNAME>*+
+*<ns1:PASSWORD>tkl123</ns1:PASSWORD>*+
+*<ns1:CHANNEL_ID>TKL</ns1:CHANNEL_ID>*+
+*</ns1:LOGIN_INFO>*+
+*</soap:Header>*+
+<soap:Body>+
+<ns1:substatusElement>+
+<ns1:pInparam>+
+<ns1:insubno>7674988</ns1:insubno>+
+</ns1:pInparam>+
+</ns1:substatusElement>+
+</soap:Body>+
+</soap:Envelope>+

IPod Touch no longer compatible with Pioneer head unit?

Recently installed the newest iTouch software. Before the update I had no issues playing songs from my ipod through my car CD player via usb. Pioneer Premier DEH-P400UB is the model I am using.
Now that I have installed the update, when I plug the ipod in the CD player displays "NO MUSIC." The ipod reads "accessory attached," as it always has.
Anyone else have this issue with their head units? Any brand.

I am so frustrated. I have a Pioneer AVH-P3100DVD and my i-pod touch worked pretty much perfectly with it until I clicked to update the OS to 4.1. Now it is a disaster, slow screen changes, constantly cutting out music. What a joke. My stereo and i-pod are basically useless now thanks to that idiotic 4.1 "upgrade". What is Apple doing putting some buggy piece of crap update out there that basically ruins your i-pod touch? Geez.

I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

Which iBook do you have?
http://support.apple.com/kb/HT1772?viewlocale=en_US
Which version of the OS is installed, and which version are you trying to install?
You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it.

My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?

My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?

Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Repair Disk.
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH14222

Cfdocoument with a header question

Similar Messages

Maybe you are looking for