Cferror not finding all errors

I put this in Application.cfm
<cferror type="request" template="testerr.cfm"> and
made a error reporting page hoping to catch and and handle any
error. It is CFMX6.1 by the way.
***If I try
<cfset testval_1=1> and then try to cfoutput testval_2
which is not assigned, the error is caught by cferror and the error
page displays just fine.
***But if I try
<cfset testval_1=>, I get the default error message
Invalid CFML construct found on line 18 at column 11.
What am I doing wrong?

you are doing nothing wrong. your second example is a
compiler error
(invalid cfml), not request error.
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com/

Similar Messages

Link Checker not finding all errors

Hi. I am running the link checker, but its not
finding all my errors - does anyone know why? -- for example -
links like "/products/index.html should be "../products/index.html
-- but link checker is not flagging this as wrong.
Also the opposite - if I have this "../../products/index.html
- and it should be : "../products/index.html - it doesnt know its
wrong.
Help - I really wanted to implement my new site tomorrow -
but I cant trust the results I am seeing right now.
Shriley

>
Hi. I am running the link checker, but its not
finding all my
> errors -
> does anyone know why? -- for example - links like
"/products/index.html
> should
> be "../products/index.html -- but link checker is not
flagging this as
> wrong.
Either link will work fine. Both point to EXACTLY THE SAME
PLACE, assuming
your file doing the linking is one folder level below the
root. The former
link is called a root relative link since it describes the
path to the
linked file from the root of the site no matter where the
linking page is.
The latter is called a document relative link because it
describes the path
to the linked file from the location of the current page.
Neither will be
flagged by the link checker, since both could be right.
> Also the opposite - if I have this
"../../products/index.html - and it
> should be : "../products/index.html - it doesnt know its
wrong.
Is this a real or a made up example? If you have the former,
and it should
be the latter, then your site is not properly defined.
> Help - I really wanted to implement my new site tomorrow
- but I cant
> trust
> the results I am seeing right now.
It's a cockpit error, I believe. To read more about
root/document relative
links, go here -
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_13129&sliceId=2
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15546&sliceId=2
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"sdunham" <[email protected]> wrote in
message
news:[email protected]...
>
Hi. I am running the link checker, but its not
finding all my
> errors -
> does anyone know why? -- for example - links like
"/products/index.html
> should
> be "../products/index.html -- but link checker is not
flagging this as
> wrong.
>
> Also the opposite - if I have this
"../../products/index.html - and it
> should be : "../products/index.html - it doesnt know its
wrong.
>
> Help - I really wanted to implement my new site tomorrow
- but I cant
> trust
> the results I am seeing right now.
>
> Shriley
>

Mail subject search is not finding All copies why?

mail 6.3 using a subject search (in the small spotlght) - is not finding All copies in my folders and subfolders why? I have done indexing for all mail folders and that did not correct it.

Are you really still running OS X version 10.7.4 as your post indicates above? I don't believe Mail 6.3 would run correctly on Lion.
If not, and you're really running Mountain Lion, then I suggest Mailbox > Rebuild on the box(es) / folder(s) not working correctly.

Using iPad air, iPod, iCLoud and WinPro 7 - I am not finding all my tunes and movies among all these devices.

When I orignally installed iTunes current update, and tried to move about the devices iTunes would crash. I uninstalled it, then reinstalled it. It seems to be stable, however as before I am not finding all of my TUnes and Movies on all my devices.
Any one?
Thanks-

Hey thomnj,
From what I understand, it sounds like after uninstalling and reinstalling your iTunes as a troubleshooting step, you're now missing some of your media? I would troubleshoot the issue with the steps in here:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Welcome to Apple Support Communities!
Best,
Delgadoh

Ipad2 shut off after down the battery but when connect the charger my ipad2 is not storing the power in the battery and i also not finding the error code ???

ipad2 shut off after down the battery but when i connect the charger with my ipad2, its not storing the power in the battery and i also not finding the error code ???

If you drained the battery, it may take a bit for it to come back. I'd plug it in and leave it for a few hours and see if it's charging.
If not, you can try to do a reset. Hold down the sleep and home keys for about 20 seconds. When you see the white apple, let go and let it reset and see if it charges.
It's also possible that your battery has reached the end of its life. THey can only handle a finite amount of recharge cycles. If you can't get it to hold a charge, then make an appointment at your local apple store and explore your other options.

Hi there, I have much files saved on pages ( ios ipad) , I just open it today and did not find .all the files !!!! Just 4!!! Taken in consider that I did not delete or making any wrong action. How I can return the lost files!!!! Help please

Hi there, I have much files saved on pages ( ios ipad) , I just open it today and did not find .all the files !!!! Just 4!!! Taken in consider that I did not delete or making any wrong action. How I can return the lost files!!!! Help please
its very important files!

tis true
I know, I always do that but I was in a rush to get somewhere and I was relying on my thousand dollar Mac to do some kind of recovery or something. I know Microsoft always keeps temporary files (I think Mac does too, part of me asking here in this forum was for someone to tell me where I can find those files) and when you go to open Office Works then it gives you the option of opening the last recent documents, saved or not saved.
I usually copy paste into my emial just in case something goes wrong with the created document but I just didn't have the time to login and do all that My loss, you live and you learn, BUT still if ANYONE got any info on this, PLEASE DO CHIME IN *keeping the hope alive*

I have saved a large number of cd on an extermal drive via my laptop. I have now moved my external drive to my desk to but I tunes does not find all the CD i have saved on the external drive

I have saved a large number of cd on an external drive via my laptop. I have now moved my external drive to my desk to but I tunes does not find all the CD i have saved on the external drive

Depending on which email client software you use
the files should be in 'your home folder' library, esp.
if you use Mail application.... ~/Library/Mail
Since you don't specify what mail application,
that would most be associated with the file.
I notice there are some items to the right of your post
where it says "more like this' so that may be worth a
look to see if similar issues were answered. Also, the
Help viewer in your system is a searchable database.
Seems that google also brings up fair information, too.
Do you have a complete bootable clone of your entire
Mac system on an externally enclosed hard disk drive?
Good luck & happy computing!

Edit find/change (not finding all instances)

I am using Edit>Find/Change to change a brand name in a document — however, this feature is not finding ALL instances of the brand name. I am having to manually/visually edit through the entire doc. Suggestions?

Hi,
You could check whether "Case sensitive" is switched on in your find/change dialog. Also check that your find format options are cleared. Click the "More Options" button if the find format options are not showing in the dialog.
Regards,
Malcolm

"Could not find RAID" error in Disk Utility

Hello,
I could really use some help as this problem is causing me lots of headaches. I have two 500GB MyBook hard-drives connected to my MacBook Pro via two USB's. I had them setup as a mirrored RAID, and they were working properly for quite sometime. However over the past few weeks I noticed they were always in a degraded state, and Disk Utility would always rebuild them. However after the rebuild they would still have the status of "Degraded" and the next time Disk Utility opened it would start the rebuilding process yet again.
So I moved all the data on the drives to a backup, and I stopped the mirrored RAID. After erasing the data on the drives individually I attempted to setup the mirror again. However after the mirror had just about finished, and it was to the point of "bringing the RAID online" I always get an error that states "Creating RAID set failed", "Creating RAID set failed with the error: Could not find RAID.".
I'm hoping someone smarter than myself in this area can lend me some time and assistance to solving this issue.
Thanks,
Paul

Well. No one really came to my rescue with this question. Turned out to be a Finder issue. After reinstalling the operating system everything started working again with Disk Utility.
Later,
Paul

Windows can not find ' FILE ': error.

I have downloaded and installed the production version of SQL Developer. (1.0.0.14.67)
Windows XP SP 2.
When I started it for the first time I checked all the file association check boxes.
If I double click on a .sql file the following windows error occurs:
Windows can not find '<file>'. Make sure you typed the name correctly, and then try again. To Search for a file, click the Start button, and then click search.
SQL Developer does startup. The error message is closed when the OK button is selected.
Any Ideas?
Regards;
Robert

Hi Robert,
Just to confirm, SQL Developer does actually open the file. The only issue is the error message displayed. I have logged a bug for that.
There is a work around until that is sorted. If you use explorer to associate the file types with SQL Developer, they open without this error.
Regards
Sue

Can not find library error

Hi,
Forms 9.0.4.0.19
I put FORMS_PATH in default.env file to point to all the plls.
When opening a pll I am getting
PDE-PLI018 Could not find library FNDSQF
Just in case I also created env var FORMS_PATH to point to the same place. Doesn't work either.What am I missing?
Thank you
Anatoliy

Thanks so much, Andreas, this was it.
I thought may be you help me with the next error tjhat I am getting now - PDE-PEP006 Encoded Program Unit has an unknown format.
The thing is that the custom.pll that I need to make a change to was last developed with Developer 10G Forms Builder 10.1.2 (as I was told).
I downloaded Developer 10G from OTN last week, installed, but the forms builder version there is 9.0.4.
So I guess that may be a problem, I wonder I can get the right one on if there is any workaround.
Regards,
Anatoliy

ITunes backup is not finding all the song files

I lost my external hard drive that held my iTunes folder. I had a backup on my drobo from 30 days ago so I copied this to a new external drive in a new "Music" folder.
This iTunes backup had not yet been consolidated and organized into a "iTunes Media' folder yet - that was what I had just lost with all of my updates and cleanup (which worked well - then). I figured I would have to do it all again.
When I opened up iTunes with the Option key and pointed it to the new Music/iTunes folder, it came up with all the movies, tv shows, podcasts, books, apps, songlists and songs listed but everyone of them had next to the file the "!" (Can not find file, do you want to locate?). I tried locating a dozen or so but iTunes would never relocate larger numbers on its own.
I tried consoldiating and re-organizing these files but I am always left with thousands and thousands of unreferenced files - even though this was the same folder structure and iTune Library and Music Library.xmls that were working a month ago on the old drive.
Any suggestions as to how to get this recent iTunes folder to "see" all the same files in this new location?
Thanks for any help,
Pheel
OSX 10.6.8
iTune 10.4

try this script:
iTunes Track CPR v1.3
This script attempts to locate the files of so-called "dead tracks"--iTunes tracks designated with (!)--that you assume are not actually missing but are still located in the iTunes Music folder in their "iTunes File Order" (Music -> Artist -> Album -> file.xxx)."

Could not find file ERROR while connecting to access (mdb) file

I am getting the following error while connecting to the database:
javax.servlet.ServletException: [Microsoft][ODBC Microsoft Access Driver] Could not find file 'C:\WINNT\system32\Database1.mdb'.
Following is my code:
<%
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     String database="jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=";
     String filename="D://BeaTemp//Database1";
     database+= filename.trim() + ";DriverID=22;READONLY=true}";
     Connection con=DriverManager.getConnection(database, "", "");
     Statement st=con.createStatement();
     ResultSet rs=st.executeQuery("select * from Database1.Employee");
     ResultSetMetaData rsmd=rs.getMetaData();
     while(rs.next()){
          for(int i=1;i<=rsmd.getColumnCount();i++) {
               out.println(rs.getString(i));
%>
What could be the problem..??
Thankx in advance..
Satish.

Got the solution.
The statement:
ResultSet rs=st.executeQuery("select * from Database1.Employee");
should be changed as:
ResultSet rs=st.executeQuery("select * from Employee");
Now, it is working fine.
Regards,
Satish.

Icloud not finding all my devices

My iCloud account is not registering all of our devices. We are trying to give someone else an iPad mini, but we can't set it up because it wants us to remove it from our find my device feature. We went to remove it, but it isn't listed.

Do you still have the iPad with you? Does it prompt you to enter the Apple ID and password directly on the iPad?

OseException (-12021) Could not find snapshot error during synchronization

I have successfully deployed mobile adf client to blackberry simulator.
When I started the application first time, it synchronized the data without any errors.
But, in subsequent synchronizations, it shows the following error
oseException (-12021) Could not find snapshot with id 133.
Any help would be highly appreciated.

I have successfully deployed mobile adf client to blackberry simulator.
When I started the application first time, it synchronized the data without any errors.
But, in subsequent synchronizations, it shows the following error
oseException (-12021) Could not find snapshot with id 133.
Any help would be highly appreciated.

Cferror not finding all errors

Similar Messages

Maybe you are looking for