CFGFWK-64069: Tha following prerequisites were found to be missing

Hi All, please Help
when i am config domain in my weblogic i am getting following error
CFGFWK-64069: Tha following prerequisites were found to be missing
Oracle BI Composer runtime-11.1.1.0 Oracle BI-ADF Runtime-11.1.1.0
please help what is this error and how to solve it ... its urgert plz,..
thanks in advance

Hi PongoDog,
Thank you for your question.
By your description, we could refer to the following steps to check if issue persist:
Remove all  hub servers certificate
Create a new hub server certificate with command "New-ExchangeCertificate"
Remove the edge subscription on hub & edge server
Recreate sync subscription and import it on hub server.
If the issue persist, we could Check network connectivity between the Hub Transport server and Active Directory. Use Ping to isolate network hardware problems and incompatible configurations. Use PathPing to detect packet loss over multiple-hop trips. then
run dcdiag /s:<Domain Controller Name> at a command prompt on the Exchange Server. Use the output of Dcdiag to discover the root cause of any failures or warnings that it reports. Finally Rreview the Application log for MSExchangeADAccess and MSExchange
Topology events that could provide more information about the root cause of this event and post Event ID to
[email protected] for our troubleshooting.
If there are any questions regarding this issue, please be free to let me know. 
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Similar Messages

  • "Developer Error. The following errors were found in your file:

    I reinstalled my OS and I am trying to install ?LabVIEW properly for the past two days and whenever I run the setup I am getting this error
    ""Developer Error. The following errors were found in your file:
    1. Specified file not found: [Utilities] UpgradeManagerPostProcessor = Bin\niPie.exe
    Correct the ini file and try again.""
    Mathan Suggested me this thread .
    In that thread Brain.T had given a zip file i put it in my bin folder and I am now able to install LabVIEW.But I am not able to install device drivers,vision,vision assistant.Help Please

    So you are intentionally creating duplicate posts. You know as well as I do the difficulty in following threads when people post in several different places the same question, and not knowing which one to follow and respond to. In your case you posted the same question in 3 places.

  • Sap Interface Issues - SM58- the following errors were found

    Hi Experts,
    Could you please tell me...why are the following errors coming in SAP EDI .
    Caller Function Module Target System Date Time Status Text Transaction ID
    C10IBBITSN IDOC_INBOUND_ASYNCHRONOUS SAPBC4X-LOG_L 16.09.2011 08:14:28 com.wm.lang.flow.FlowException: SQL0803 - Duplicat 0ADE2828A6C64E73055FAD
    C10IBBITSN IDOC_INBOUND_ASYNCHRONOUS SAPBC4X-LOG_L 16.09.2011 08:14:29 com.wm.lang.flow.FlowException: SQL0803 - Duplicat 0ADE2828A6C64E73055FAD
    C10IBBITSN IDOC_INBOUND_ASYNCHRONOUS SAPBC4X-LOG_L 16.09.2011 08:14:29 com.wm.lang.flow.FlowException: SQL0803 - Duplicat 0ADE2828A6C64E73055FAD
    C10IBBITSN IDOC_INBOUND_ASYNCHRONOUS SAPBC4X-LOG_L 16.09.2011 08:14:30 com.wm.lang.flow.FlowException: SQL0803 - Duplicat 0ADE2828A6C64E73055FAD

    So you are intentionally creating duplicate posts. You know as well as I do the difficulty in following threads when people post in several different places the same question, and not knowing which one to follow and respond to. In your case you posted the same question in 3 places.

  • BW: The following objects were not found when accessing server

    Hi All,
    Problem:
    - on the infoprovider, no authorization object is flagged as authorization relevant
    When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
    I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
    Why does the system checks this? Because I don't want to give full authorization.
    Is there a way to unable this check, as I want the attributes to be visible (also without the *)
    +
    When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
    What can I do to get them visibIe in the output?
    I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
    Anyone who faced the same problem?
    (>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
    The attributes are navigational attributes.
    Thanks for your reply

    Hi Shivraj,
    BW 3.5 version
    Thanks

  • ERROR: DW050: The following payload errors were found during install:  ERROR: DW050:  - Adobe Muse:

    Having no luck installing anything. Even reinstalled Windows 7 Ultimate.
    Starting out with Muse since it seems to be a small file size. No luck...anyone have any ideas?
    This is what I get:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s), 0 warning(s)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Muse: Install failed
    -Jason

    Sounds like it's a fairly common error across the suite - try this:
    http://helpx.adobe.com/creative-suite/kb/installation-error-dw050-dw020-cs5.html

  • The following objects were not found when accessing server

    Hi All,
    Problem:
    - on the infoprovider, no authorization object is flagged as authorization relevant
    When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
    I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
    Why does the system checks this? Because I don't want to give full authorization.
    Is there a way to unable this check, as I want the attributes to be visible (also without the *)
    Can anyone help me with this? Thanks in advance for your reply

    When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
    What can I do to get them visibIe in the output?
    I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
    Anyone who faced the same problem?
    (>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
    The attributes are navigational attributes.

  • Hello  J have problem in the demarage d iphoto the dialogue displays and asks me for the following text?  138 photos not having been imported were found in the iPhoto library(bookcase).  Would you care for import them? Yes or no you already have meet this

    onjour
    j ai des probleme au demarage d iphoto le dialogue s affiche et  me demande le  texte suivant ?
    138 photos n’ayant pas été importées ont été trouvées dans la bibliothèque iPhoto.
    Souhaitez-vous les importer ? oui  ou non avez vous deja rencontrer ce proble  si oui pouvez vous m aider
    Merci
    Hello
    J have problem in the demarage d iphoto the dialogue displays and asks me for the following text?
    138 photos not having been imported were found in the iPhoto library(bookcase).
    Would you care for import them? Yes or no you already have meet this prowheat if yes can you m help
    Thank you

    Open your iPhoto Library package with the Finder as shown in this screenshot
    and look in the folder named Auto Import.  Move any files in that folder to a folder on the Desktop and close the package. Do not make any other changes.  Launch iPhoto (the message should be gone) and drag the folder on the Dersktop into the open iPhoto window to import them.
    OT

  • What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project:  - There appears to be a broken asset in your project. Correct this problem before burning this project."

    What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project:  - There appears to be a broken asset in your project. Correct this problem before burning this project."

    It means that iDVD has found a problem with one of the movies added to the project.  Did you edit the movie after it had been added to the project.
    Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

    While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

    While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

  • Weblogic Portal: Error While Deploying: VALIDATION PROBLEMS WERE FOUND

    Hello friends
    I am getting following error while deploying EAR on server.
    “Module named 'MyEAR' failed to deploy. See Error Log view for more detail.”
    Steps I followed:
    1: Created one portal domain successfully and was able to start the serve after thatr.
    2: Created one Portal EAR Project and added it on server.
    Now when I am restarting the server, getting following error/log
    **“weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND**
    **problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>”**
    Exception stack Trace:
    java.lang.Exception: Exception received from deployment driver. See Error Log view for more detail.
    at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper$DeploymentProgressListener.watch(WlsJ2EEDeploymentHelper.java:1566)
    at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper.deploy(WlsJ2EEDeploymentHelper.java:470)
    at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishWeblogicModules(WeblogicServerBehaviour.java:1346)
    at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishToServer(WeblogicServerBehaviour.java:803)
    at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishOnce(WeblogicServerBehaviour.java:623)
    at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publish(WeblogicServerBehaviour.java:516)
    at org.eclipse.wst.server.core.model.ServerBehaviourDelegate.publish(ServerBehaviourDelegate.java:708)
    at org.eclipse.wst.server.core.internal.Server.publishImpl(Server.java:2690)
    at org.eclipse.wst.server.core.internal.Server$PublishJob.run(Server.java:272)
    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
    Caused by: weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
    at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:193)
    at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
    at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
    at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
    at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:88)
    at weblogic.management.deploy.internal.MBeanConverter.createApplicationForAppDeployment(MBeanConverter.java:66)
    at weblogic.management.deploy.internal.MBeanConverter.setupNew81MBean(MBeanConverter.java:314)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.compatibilityProcessor(ActivateOperation.java:81)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.setupPrepare(AbstractOperation.java:295)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:97)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
    at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
    at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
    at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:245)
    at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:231)
    at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:155)
    at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:323)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
    at weblogic.application.ApplicationDescriptor.getApplicationDescriptor(ApplicationDescriptor.java:301)
    at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:178)
    as it is ‘brand new ‘ – IDE generated application, weblogic-application.xml is untouched.
    Thanks & Regards

    I have seen this problem also. To be clear, this occurs straight out of the box. In other words - launch eclipse, create a new workspace, create a new portal EAR project with the wizard, and then try to deploy it without touching anything. In fact, try changing the portal's facets to anything, plain EAR, 11g default, Portal EAR - it doesn't matter. It will not deploy. Either you get this error or you get deployment errors complaining about missing library references in the weblogic-application.xml. Then - you have to do surgery just to get an 'out of the box' portal to run. Very frustrating.

  • Errors were found when compiling the workflow. The workflow files were saved but cannot be run.

    Greetings All,
    I am having issues with a SharePoint Designer workflow.  This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow.  I'm developing this as a SharePoint 2010 workflow because I need to do
    impersonation.
    The environment and workflow have been running, in the past week, without issue.  I went to add a couple steps and now I cannot publish the workflow.  While in SharePoint Designer, I receive the error:
    "Errors were found when compiling the workflow.  The workflow files were saved but cannot be run."  When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow." 
    That is all the error information I have available; nothing is in the log files.
    I have investigated this error and tried the following:
    Cleared the SharePoint Designer cache.
    The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000.  Restarted the servers (which may not have been necessary) and tried again receiving the same error.  I then increased it to 30000 with the same error result.
    Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
    I reboot the servers and try again and now I can publish the small test workflow but not the original.  However, neither will run.  When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
    An unexpected error occurs.  I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
    Also, now no workflows can be published in this web app.  Not just the one I was working on but none of them!
    Does anyone have a clue what has happened to the SharePoint 2010 workflow service?  Or some suggestions for me to try?
    Thank you in advance for your help!
    Bob Mixon

    try these links:
    http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
    http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
    http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
    http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
    Hi Sagar,
    I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
    Your first link is specific to SharePoint 2013 workflows.
    Your second link refers to the UserDefinedWorkflowMaximumComplexity.  If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
    Your third link also refers to large workflows with many approval activities.  My workflow doesn't contain any approval activities.
    And you fourth link refers to 2013 workflows not 2010.
    My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
    Thank you...

  • Seagate external drive: Partition map check failed because no slices were found

    I have a 3TB Seagate Expansion external backup drive connected to my Retina Macbook Pro via USB. The disk will not eject from a regular Finder window - it will only eject from Disk Utility. Backups seem to otherwise be running fine. I tried to verify/repair the disk in Disk Utility, and I got the following error: "Partition map check failed because no slices were found." I am able to verify/repair the partition without any problem, and no errors are found.
    I'm concerned about relying on a backup drive that may be heading south. Here is the output from diskutil info:
    diskutil info disk3
       Device Identifier:        disk3
       Device Node:              /dev/disk3
       Part of Whole:            disk3
       Device / Media Name:      Seagate Expansion Desk Media
       Volume Name:              Not applicable (no file system)
       Mounted:                  Not applicable (no file system)
       File System:              None
       Content (IOContent):      GUID_partition_scheme
       OS Can Be Installed:      No
       Media Type:               Generic
       Protocol:                 USB
       SMART Status:             Not Supported
       Total Size:               3.0 TB (3000592977920 Bytes) (exactly 5860533160 512-Byte-Units)
       Volume Free Space:        Not applicable (no file system)
       Device Block Size:        4096 Bytes
       Read-Only Media:          No
       Read-Only Volume:         Not applicable (no file system)
       Ejectable:                Yes
       Whole:                    Yes
       Internal:                 No
       OS 9 Drivers:             No
       Low Level Format:         Not supported

    @ Allan Eckert: Unfortunately, reformatting is out of the question, I have 5 years of work on this!
    @ Loner T: Yes, the firmware did successfully upgrade after router reboot and a bit of troubleshoot.
    Thanks for the quick replies. Keep 'em coming!

  • Partition map check failed because no slices were found for WD My Book 1140 media

    Have been using a WD My Book 3TB HD which was partitioned into three 1TB partitions for almost a year.  Now when I try to access it via my MacBook Pro I am getting the following error message "Problems were found with the partition map which might prevent booting; Error: Partition map check failed because no slices were found".  Does anybody have any suggestions on how to repair this problem and salvage information stored on it?

    I am also experiencing this problem.
    4TB Hitachi Deskstar. Internal. Disk not readable error on boot.
    "Partition map check failed becuase no slices were found" error when I attempt to verify or repair with Disk Utility.

  • BAM-06008: The XML payload is invalid; extra contents were found.

    Hi All,
    Version:11.1.1.6
    We are getting the BAM Error: "BAM-06008: The XML payload is invalid; extra contents were found" after I added a another field to a BAM Object.I have added that extra field to corresponding data objects .wsdl file as well as in the .xsd. I can see the new field in the BAM DO. However, when I used to send a payload with the newly added field it fails with the above error. However, if I add a new data object in BAM with the field it works fine.
    Why  am  I getting this error?
    Thanks,
    Rahul

    I have followed the following steps:-
    1.Make entry of new field in ".wsdl" file which is in the BAM folder.
    2.Make entry of new filed in ".xsd" file.
    3.Make appropriate mappings in ".xsl" file corresponding to the sensor's action.
    Initially i was only restarting BAM and was facing above mentioned error. After restarting SOA as well as BAM server, it started working.

  • "No airport networks were found" - setup problem

    I'm trying to setup a new airport network with an AEBS. I plugged it in to the outlet and then plugged the cable modem ethernet cable into the AEBS. The light turns green. Then I open Airport Setup Utility and get the following message:
    "No airport networks were found"
    I then opened the Airport Admin Utility, and it is also unable to see the AEBS.
    Any suggestions?

    Okay, I updated the firmware to 6.3 and am now able to see the AEBS network. However, I can't connect to the Internet using the network I created in the Admin Utility.
    The Network control pane says Aiport is active and connected to the Internet, but I can't get online. I have a Comcast cable high-speed Internet. I'm not exactly sure what my settings should be in Network?

Maybe you are looking for