Cfimage hotfix for 64 bit

We are running CF 8 on 64 bit Windows. Version 8,0,1,195765
We are running into the error where we think cfimage is
leaving a file locked and causing the
coldfusion.image.ImageWriter$ImageWritingException error.
My question is, is this the right hotfix for 64 bit as well?
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403411&sliceId=1

Generally hotfixes can be applied to 32 and 64 bit versions.
You'll want to look in this path (or search) for your file:
..jrun4\servers\(instance_name)\cfusion-ear\cfusion-war\web-inf\cfusion\lib

Similar Messages

  • Issue w/ Partition Structure Hotfix for Yoga

    I tried running Lenovo's Partition Structure Hotfix for Windows 8 on Yoga (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS033035) and it ran into an issue. After the command script runs for a little bit, I get the following problem:
    "New File  131072    001.dat
    ERROR 32 (0x00000020) Copying File d:\System Volume Information\001.dat
    The process cannot access the file because it is being used by another process.
    Waiting 30 seconds... Retrying..."
    It continues to do this over and over until I close it. I have no idea what that file is nor which process is using it, and I was hoping someone could help me understand if there's a way to shut that process down and successfully do the hotfix.
    Thanks!

    there may be virus/anti-virus process/windows update or windows service so i'm not sure. can you try to re-install the windows by pressing one key recover button then run the hotfix? it will take just a few minutes to re-install the system if you can.

  • Presenter for 64 Bit

    Does anyone know when Adobe will release a version of Presenter for 64 bit systems? I have been using it for a couple of years on an older 32 bit laptop and would really like to get this installed with PowerPoint 2010 on my newer 64 bit PC. I got the impression from customer support that a release is in the works.

    There are no plans at this time for 64-bit Presenter. Microsoft recommends that their customers use Office 32 bit for everyday use. They only recommend Office 64 bit as an exception. Consequently, Presenter is targeted to the majority of customer using Office 32 bit.
    This from Microsoft on this topic:
    "Yes, Office 2010 products are available in 64-bit versions; however, for the best productivity and user experience, Microsoft recommends 32-bit Office 2010 for both 32-bit and 64-bit operating systems. Office 64-bit is optimized for advanced data analysis scenarios that most users don’t require, and existing 32-bit add-ins are not supported on Office 64-bit."
    See:
    http://office.microsoft.com/en-us/products/office-2010-frequently-asked-questions-HA101674 631.aspx
    and
    http://office.microsoft.com/en-us/word-help/choose-the-32-bit-or-64-bit-version-of-microso ft-office-HA010369476.aspx?CTT=5&origin=HA101674631
    By default, Microsoft Office 2010 installs the 32-bit version of Office 2010 even if your computer is running 64-bit editions of Windows.
    Important    The 32-bit version of Office 2010 is the recommended option for most people, because it prevents potential compatibility issues with other 32-bit applications, specifically third-party add-ins that are available only for 32-bit operating systems.
    Office 2010 provides support for the 32-bit version of Office 2010 programs running on 64-bit operating systems by using WOW64, a compatibility environment provided by the operating system that allows a 32-bit application to run on a Windows 64-bit operating system. Using the 32-bit version of Office 2010 allows people to continue to use existing third-party add-ins for Office that are 32-bit.
    Note    If you already have a 64-bit version of Office installed on your computer running a 64-bit operating system, the default installation is the 64-bit version of Office.
    Learn more about the 64-bit version of Office 
    What is in the 32-bit version of Office but is not included in the 64-bit version of Office?
    Compatibility with existing Office files and solutions
    Operating systems required to run 64-bit version of Office
    Install the 64-bit version of Office
    What is in the 32-bit version of Office but is not included in the 64-bit version of Office?
    ActiveX controls library, ComCtl    This library contains ActiveX controls that are used to build solutions. It is most commonly used in the following Microsoft Office programs: Access, Excel, and Word.
    SharePoint List control    The list view in SharePoint Technology is not available to people using the 64-bit version of Office.
    Top of Page
    Compatibility with existing Office files and solutions
    Note    The 64-bit version of Office 2010 is not compatible with any other 32-bit version of Office programs. As a result, you must first uninstall all 32-bit versions of Office programs before you install the 64-bit version of Office 2010. The Office 2010 disc includes both 32- and 64-bit versions of Office 2010. To install 64-bit Office 2010, you must run Setup.exe from the x64 folder. For more information, see Install the 64-bit version of Office.
    ActiveX controls library, ComCtl    Any solutions that use these controls do not work. No good alternatives are available for some of these controls.
    Third-party ActiveX controls and add-ins    None of these work with the 64-bit version of Office.
    Note   There is no 64-bit version of Visual Basic 6. As a result, many of these objects need to be ported and rewritten.
    Visual Basic for Applications    The only way that Microsoft Visual Basic for Applications (VBA) that contains the Declare statement work in the 64-bit version of Office is if you update the code manually.
    Compiled Access databases    The .MDE and .ACCDE files, a common way for Access application developers to distribute solutions and protect their intellectually property, do not work in the 64-bit version of Office. You must contact the application vendor to have the vendor recompile, retest, and redistribute the solution in the 64-bit version.
    Communicator integration    If you install the 64-bit version of Office, certain Microsoft Office Communicator 2007 features that involve integration with Outlook are lost. For example, you cannot right-click a Communicator contact to schedule a meeting, send an e-mail message, or find previous conversations. This is because Office Communicator R2 is 32-bit, and Messaging Application Programming Interface (MAPI) calls do not cross the 32-/64-bit boundary.
    Additionally, certain Microsoft Outlook 2010 features are unavailable with Communicator R2. For more information about these Outlook features and the hotfix that addresses them, see the following Knowledge Base article: You cannot see features in Office 2010 builds if you are running Communicator 2007 R2 RTM or earlier versions
    For optimal Communicator R2 performance, make sure that you have the latest version by visiting the Communicator download page at Microsoft Office Communicator 2007 R2 Trial Download.
    Top of Page

  • Creation of Add-on package for 64 bit and 32 bit SAP Business One Client

    Please help me creating package for 64 bit and 32 bit SAP Business One. If Add-on executable is compiled with x86 option then there is no issue of connecting Add-on with 32 bit SAP Business one and if Add-on executable is compiled with Any CPU option then there is no issue of connecting Add-on with 64 bit SAP Business one. Problems are mentioned as below
    1. My Add-on uses MS ACCESS connection and the connection is read using Jet OLEDB 4.0 provider. It works fine for x86 compile mode but not when compile mode is Any CPU. I searched for the issue on Google and found a solution to change MS ACCESS connection provider to ACE.OLEDB.12.0 but again ACE provider is installed according to the Office version i.e. 32 bit or 64 bit office suite. If I install 32 bit ACE provider then Add-on executable compiled with x86 version is working fine but with Any CPU option throws error as provider is not registered on current machine.
    2. Secodly, our license validation activex dll is build using vb 6.0 and therefore when Add-on executable is compiled using Any CPU option, Add-on EXE cannot read from license dll. Any suggestion, how the activeX dll can be compiled whose component can be created from for X86 compiled exe and any cpu compiled exe.
    Please help because we are stuck in this issue and cannot move forward.
    Thanks.

    Hi Alejandro,
    That is one solution but did your add on used ms access connection? if you used Jet oledb to connection string or ace oledb connection string? what if 32 bit office is installed and what if 64 office is installed? how did you found the office version in install script? after determining the office version how did you installed Microsoft redistributable for ace oledb (32 bit or 64 bi )?
    I am sorry that I asked many questions but these are the problems where I am stuck with the addon installer?
    Thanks

  • Memory Problems with Adobe PDF iFilter for 64-bit

    In preparation to rebuild my Windows Search Index, I installed the Adobe PDF iFilter for 64-bit on my system (Vista Business 64).  When I finally rebuilt the index, I wasn't too surprised by what I saw happen, namely, the SearchFilter.exe process would kick in whenever I wasn't using the system and just eat RAM.  One time I turned it on and it had allocated over 4,000 MB (and my system only has 4,030 MB available) so of course it was forcing all the other processes to hard fault (ie. everything was moving like molasses--for example, it took 20 minutes to put the thing to sleep).  But I just let it do it's work, figuring that perhaps this was to be expected relative to the small library of PDF's that I've accumulated on my computer, ranging from LaTeX generated text files, to containers for hi-res scans.  So, after a day and a half of basically not using my laptop, everything finally calmed down and I enjoyed the benefits of searching the content of my library from the Windows Start menu--for a short while.
    However, to my dismay I've encountered the problem that this freezing of my computer would now occur after everytime I download a new PDF (in this particular case they were Google Books scans) and then left the computer to idle.  Again, the SearchFilter.exe would allocate all of my RAM for itself and just push everything else onto the Virtual RAM, which means the SLOWEST possibly fetching you can get.  I had to uninstall as this was making my computer unusable for 15-30 minutes after each idle. Everything is back in working order without the iFilter, but I would like to know if anyone has reported such problems on x64 systems.  Obviously, I will also report the problem to Microsoft, since the search engine should certainly have the precaution to handle such memory problems.   However, it is a problem that is created by the Adobe PDF iFilter interacting with the Windows Search engine.

    Hello,
    We believe we have figured this out.  It looks like it has to do with the length of the default folder location for the Adobe iFilter.
    I was able to reproduce the issue and the following resolved it for me.  See if this resolves it for you all as well.
    Here is how to get Adobe Version 11 PDF filter to work.
     1 . If you haven’t already, run the following in SQL Server:
    Sp_fulltext_service ‘Load_os_resources’, 1
    Go
    --you might also need to run: 
    sp_fulltext_service ‘Verify_signature’,0  --This is used to validate trusted iFilters. 0 disables it. So use with caution.
    --go
    2. Stop SQL Server.  (Make sure FDHost.exe stops)
    3.  
    Uninstall the Adobe ifilter (because it defaulted to having spaces or the folder name is too long).
    4.  
    Reinstall the Adobe iFilter and when it prompts for where to install it, change it to: C:\Program Files\Adobe\PDFiFilter
    5.  Once the installation finishes, go the computer’s Environment variables. Add the following to the PATH.
    C:\Program Files\Adobe\PDFiFilter\BIN
    NOTE: it must include the BIN folder
    NOTE: If you had the OLD location that included spaces, remove it from the path environment variable.
    6. Start SQL Server
    7.  IF you had an existing Full-text index on PDFs, drop the full-text index and recreate it.
    8. You should now get results when you run sys.dm_fts_index_keywords('db','tblname')  --Note: Change db to be the actual database name and tblname to be the actual table name.
     Give this a try and see if this fixes yours. 
    Sincerely,
    Rob Beene, MSFT

  • When I go to FaceTime I put in my Apple ID and then sign in, it signs in so I then tap next but it says its Verifying for a bit then takes me back to the sign in, what do I do?

    When I go to FaceTime I put in my Apple ID and then sign in, it signs in so I then tap next but it says its Verifying for a bit then takes me back to the sign in, what do I do?

    I did what they said but it still had me sign in and took me to the Virfying. Still does not work

  • Flash Professional CC no longer available for 32 Bit?

    Hi to all...
    I purchased a membership for the creative cloud and downloaded some of the applications of the suite (Photoshop CC, Illustrator CC, InDesign CC, Dreamweaver CC and Muse CC) but the only Flash Professional available for download is the CS6 version, not the CC. I assume that Flash Pro in CC is only available for 64 bit processors. Any chance to get a 32 bit version?
    Thanks for your comments...

    Flash Pro CC requires a 64bit OS. Here's the system requirements:
    http://www.adobe.com/products/flash/tech-specs.html
    If you're 32bit you will need to use Flash CS6.

  • How to find out the max mem can be allocatedTT for 32 bit Win ?

    How to find out the maximum Permanent Data Size and Temporary Data Size that can be allocated for the Oracle Times Ten for 32 bit Windows OS.

    Hi Chris,
    Am I write in saying that this also depends on shared memory setting as well?
    If that is the case, on a platform like window 2003 32-bit, one cannot have more than 4GB of shared memory. Windows Server 2003 includes support for a startup switch (entered in the boot.ini file) that allows the allocation of memory and memory address space. Regardless of the amount of physical memory that is installed on the system, the operating system uses a virtual address space of 4 GB. Out of that amount, by default, 2 GB is allocated to user-mode processes (for example, Oracle or TimesTen) and 2 GB is allocated to kernel-mode processes (for example the operating system and others). In a nutshell on systems that have more than 1 GB of RAM, this startup switch can be used to allocate more memory to applications (3 GB) and less memory to the operating system (1 GB). However, adding adding the /3GB switch to the boot.ini file will not increase the amount of physical RAM memory, the 3GB switch just tells the computer to allocate the existing memory space differently.
    For a 32-bit TimesTen the limit on memory cannot be more than 2GB (PermSize+TempSize). For example on Linux 32-bit I have 1024MB and 512MB for these two parameters.
    Thanks,
    Mich

  • Companion CDs for 64-bit Oracle HTTP Server for AIX5L(64 bit) required.

    I need Companion CDs for 64 bit Oracle HTTP Server for AIX5L(64 bit).
    I tried to install using
    as_ibm_aix_companion_101300_disk1.cpio & as_ibm_aix_companion_101300_disk2.cpio
    but when i checked the files present in <Oracle_Home>/ohs/lib , they are of 32-bit.
    Also i tried with Oracle 10.1.2.0.2 but still the server is installed as 32-bit.
    Is 64-bit Oracle HTTP Server supported on AIX5L(64 bit) ?
    If yes, then from where can i download the CDs?
    Any suggestions will be appreciated.

    Greetings,
    Try this link:
    http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201aixsoft.html
    Regards,
    Bill Chadbourne

  • HP PSC 1315xi All in One from 32-bit XP to FULL FEATURE for 64-bit Windows 7

    Switched from 32-bit XP to 64-bit Windows 7,  which did not install all  printing features or my scanner.     Know a  lot  of  people  have  this  problem, can't  find the forum  which is exactly  for  this  particular  problem,  and can't find  an  HP download.  There are so many other companies on the HP Support  pages.  Might you  include on your title page how to re-read  this subject?   
    I'm afraid I'll lose my print and copy functions forever if I  first Uninstall.  Would checking "Add Printer"  preserve  my present  version  until after I  get a  successful  download  or  maybe even  a  new Disk  for  64-bit Windows 7?   I  haven't even  found that  yet.  Thanks. [edited by Moderator]

    Good day AmerEagle,
    I understand you have upgraded from Windows XP to Windows 7 64bit and are looking to install the driver and software for your PSC 1315xi. I will certainly help you!
    Here is the direct link to the download for the Windows 7 full driver for your printer:
    HP Deskjet and Officejet Full Feature Software and Drivers
    Enjoy your Wednesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Errors running SQL Agent Jobs for 64 bit SSIS packages on a 64 bit server, but Source server 32 bit

    Hi,
    I can able ran the SSIS package in BIDS, since set to false in Run64BitRuntime property.
    Then I created SQL server Agent job I tried the following ways
    Step 1:
    Type is set as SQL Server Integration Services Packages,
    Run as - SQL Server Agent Service Account
    Package source - FileSystem
    then Execution option tab I selected 32 bit runtime
    and then run the job I am getting the below error
    Message
    Executed as user: CIT\svc_CS_SS2008Agent. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 32-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  7:29:17 AM  Error: 2013-11-28
    07:29:18.57     Code: 0xC0014020     Source: Example Connection manager "DataSource.DataExtract"     Description: An ODBC error -1 has occurred.  End Error  Error: 2013-11-28 07:29:18.57    
    Code: 0xC0014009     Source: Imports20_OAC_Gifts Connection manager "DataSource.DataExtract"     Description: There was an error trying to establish an Open Database Connectivity (ODBC) connection with the
    database server.  End Error  Error: 2013-11-28 07:29:18.59     Code: 0x0000020F     Source: DFT_Example ODBC_SRC Example [11]     Description: The AcquireConnection method call to the connection
    manager DataSource.DataExtract failed with error code 0xC0014009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.  End Error  Error: 2013-11-28 07:29:18.59    
    Code: 0xC0047017     Source: DFT_Example SSIS.Pipeline     Description: ODBC_SRC Example failed validation and returned error code 0x80004005.  End Error  Error: 2013-11-2
    Step 2:
    Type - Operating sytem (CmdExec)
    Run as - Sql Server agent service account
    Command - C:\Program Files\Microsoft SQL Server\110\DTS\Binn\dtexec.exe /FILE "D:\Example\Example.dtsx" /x86  /CHECKPOINTING OFF /REPORTING E
    then run the job I am getting the below error
    Message
    Executed as user: MIS\svc_CS_SS2008Agent. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 64-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  6:37:58 AM  Error: 2013-11-28
    06:37:58.94     Code: 0xC0014020     Source: Example Connection manager "DataSource.DataExtract"     Description: An ODBC error -1 has occurred.  End Error  Error: 2013-11-28 06:37:58.96    
    Code: 0xC0014009     Source: Example Connection manager "DataSource.DataExtract"     Description: There was an error trying to establish an Open Database Connectivity (ODBC) connection with the database server. 
    End Error  Error: 2013-11-28 06:37:59.01     Code: 0x0000020F     Source: DFT_Example ODBC_SRC Example [11]     Description: The AcquireConnection method call to the connection manager DataSource.DataExtract
    failed with error code 0xC0014009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.  End Error  Error: 2013-11-28 06:37:59.07     Code: 0xC0047017    
    Source: DFT_Example SSIS.Pipeline     Description: ODBC_SRC Example failed validation and returned error code 0x80004005.  End Error  Error: 2013-11-28 06:37:59.12     Code: 0xC004700C    
    Source: DFT_Example SSIS.Pipeline     Description: One or more component failed validation.  End Error  Error: 2013-11-28 06:37:59.16     Code: 0xC0024107     Source: DFT_Example     
    Description: There were errors during task validation.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).Started:  6:37:58 AM  Finished: 6:37:59 AM  Elapsed:  1.373 seconds.  Process Exit Code 1. 
    The step failed.
    Note:
    My source server is 32 bit and development environment in 64 bit
    if anybody have idea please share your knowledge

    Hi BIRam,
    Based on the current information, the issue may be caused by the factor that the SQL Server Agent Service Account doesn’t have access to the MySQL server. Try to create a SQL Server Agent Proxy account that has sufficient permission on the MySQL server.
    In addition, also pay attention to the package protection level setting.
    For more information, please see:
    http://social.technet.microsoft.com/Forums/sqlserver/en-US/e13c137c-1535-4475-8c2f-c7e6e7d125fc/how-do-i-troubleshoot-ssis-packages-failed-execution-in-a-sql-agent-job?forum=sqlintegrationservices.   
    Regards,
    Mike Yin
    TechNet Community Support

  • IFilter 9 for 64-bit on Server 2008 R2 creating thousands of folders

    I have installed iFilter 9 for 64-bit on a 64-bit Windows Server 2008 R2. As soon as it was installed I started seeing thousands of folders in the root of c: with the names like A9R1aa0-e3efao.  I uninstalled iFiler 9 and the folder creation stopped.  I deleted all of the folders and reinstalled iFilter 9 and the folder creation started again. Each folder has one E-mail converted to a PDF file.  We have an Exchange server on a different box and it appears that the iFilter is accessing this server and recreating all E-mail on the server that the iFilter is installed on. How can I stop this from occuring?

    Did you ever find out what the deal was? I am having a similar issue. Thousands of directories are being created and what's even more scary is that I cannot find the original files anywhere else. There is now nearly 80k files inside random directories on the root of my server.

  • How to use Windows SIM to create answer files for 32-bit (x86) Windows 7 from a 64-bit (x86_64) Windows 7 PC?

    So I'm having the old 32-bit/64-bit compatibility issues with Windows SIM. I have a Windows 7 64-bit PC (actually a virtual machine) that I intend to use to run Windows SIM and make answer files for 32-bit Windows 7 unattended installations.
    I've installed the latest Windows ADK (the Win 8.1 one). When doing this there was no choice of download or prompt during installation regarding 32-bit or 64-bit architectures. Once installed the Windows Kits folder is under Program Files (x86), but imgmgr.exe
    is a 64-bit executable. When I try and generate the catalog for a 32 bit install.wim, I get an error that 64-bit SIM cannot catalog 32-bit images.
    Is there any way to install a version of Windows SIM on a 64-bit Windows 7 PC that can catalog 32-bit Windows 7 images?

    Hi,
    I think the biggest problem is the architecture specific in answer file:
    <settings pass="specialize">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <OEMInformation>
    <Manufacturer>[ REPLACE WITH COMPANY NAME ]</Manufacturer>
    <SupportURL>[ REPLACE WITH SUPPORT WEBSITE ]</SupportURL>
    </OEMInformation>
            </component>
        </settings>
    The answer file must include processor-specific components. The answer-file settings in the windowsPE configuration pass must match the architecture type of the preinstallation environment. The settings that apply to the Windows image must match the architecture
    type of the image. For example, if you create an answer file that deploys 64-bit images from a 32-bit preinstallation environment, all components in the answer file for the windowsPE configuration pass must include the processor attribute type of x86. Settings
    to be applied in the specialize, oobeSystem, or other configuration passes must include the processor attribute type of amd64.
    If you have any feedback on our support, please click
    here
    Alex Zhao
    TechNet Community Support

  • BUG! Not system locale Filenames support for 32-bit applications error in Windows 8.1 x64 and other microssoft x64 OS-s.

    BUG! Not system locale Filenames support for 32-bit applications error in Windows 8.1 x64.        
    All Windows x64 (XP,2003,2007,Vista,7,8) have no support for not system locale filenames|foldernames for all 32-bit applications. I think it is BUG!
    For example,  it is possible to read files|folders with French or Chinese in English locale windows installed, rename it, but it is not possible open it, edit or delete. (ERRORS: File not found OR Unknown format)
    With using 64-bit programs no such problems. How does it works and how can I fix this? Is it problem with encoding in translating kernel instructions for 32-bit apps in x64 Windows OS's? Whether there are
    solutions to this problem OR some hacks|fixes? 

    Hi,
    Have you installed the language package for French or Chinese?
    If no, please download the language package and install them.
    To download language package, please click the link below,
    http://windows.microsoft.com/en-US/windows/language-packs#lptabs=win7
    Best Regards.
    Steven Lee
    TechNet Community Support

  • I used this iphone wire for a bit, it worked perfectly but then suddenly i couldnt charge my phone and it stopped working completely. ive tried many other wires but they dont seem to work as well. im starting to get really frustrated

    i used this iphone wire for a bit, it worked perfectly but then suddenly i couldnt charge my iphone 5  and it stopped working completely. ive tried many other wires but they dont seem to work as well. im starting to get really frustrated and im really unsure of whats the case. i really really need help with this. please help asap!!

    Presuming you are using a wall charger - it would seem that your battery needs to be looked at in an Apple store

Maybe you are looking for