CFL Not working for one of my UDF

Hi,
I have created one UDT.
I have created UDO for it. I also designed the screen in screen painter. In particular form i have created 3 CFL's. i have assigned to three of my UDF's. But only two or working. and another one is not working. I followed the same procedure for assigning the cfl to each field.
Kindly help me in this situation.
Thanks In Advance.

sishir,
Can u tell me the code then only i can able to give u the solution. How u define the CFL ???
Regards,
Anitha

Similar Messages

Incoming Email not working for one web app, but IS working for others in same farm.

I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?

Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

Imessage is not working for one person

My imessage is not working for one person.
Its been like this for about 2 days
I have an iphone 5
imessage is on
both phones reset network settings,deleted and remade contact, etc.

Does the other person have iMessage on, too? Is the specific phone number/address you are trying to reach them at show up for them in Settings > Messages > Send & Receive?

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

What's This Help not working for one entry in each header file

I have a large RoboHelp project that I have imported into Version 8 from a previous version. Prior to the import into Version 8, all of the What's This Help in the project was working perfectly; now, post-import, I have a problem.
Firstly, some background information.
My project contains a large number of individual header (.H) files, one for each dialog within the software. These header files, which have been generated and provided by our developers, contain one entry for each field on the dialog to which the header file relates. The header files are all contained within a \HTML Topics\Fields\ folder (going from the root of my Help project).
Each header file has a corresponding text (.TXT) file. These text files contain entries that correspond to the entries in the relevant header file. The text files are also contained within the \HTML Topics\Fields\ folder.
Below is an example of the contents of a header file:
#define IDH_HIERARCHY_APPEARANCE_HIEARCHY_LIST          16811
#define IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE         16812
#define IDH_HIERARCHY_APPEARANCE_REMOVE_APPEARANCE      16813
Below is the contents of the corresponding text file:
.topic IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE
Click this button to add a new row of hierarchical appearance settings to the grid.
.topic IDH_HIERARCHY_APPEARANCE_HIEARCHY_LIST
Use this grid to define hierarchy appearance settings. Each row in the grid represents a level of the hierarchy. For example, the appearance settings you define for the first row apply to the top level of hierarchy, the settings you define for the second row apply to the second level, and so on.
.topic IDH_HIERARCHY_APPEARANCE_REMOVE_APPEARANCE
Click this button to delete the selected row of hierarchical appearance settings from the grid.
The What's This Help that was part of the original project still works perfectly. However, after upgrading the project to RoboHelp Version 8, I have had to update the project to reflect changes to the software. As part of this work, I have imported some new header files and updated some existing ones - and edited the corresponding text files accordingly.
The What's This Help that is covered by the header files that I have imported since the upgrade to RoboHelp Version 8 does not work correctly; in each case, the What's This Help does not work for whichever field appears at the top of the appropriate text file. The position of the entry in the corresponding header file does not make a difference.
If I manually edit a text file to move a different entry to the top then recompile the Help project, the What's This Help does not work for the field that now appears at the top of the text file - and the What's This Help for the field that used to appear at the top of the text file now works.
I've tried everything I can think of to fix this, but nothing has worked. It seems as if there is a problem in the way RoboHelp is compiling the header and text files.
If I use Microsoft HTML Help Workshop to decompile the CHM file, then view the contents of the resulting, decompiled text files, the affected files appear as follows:
.topic IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE
Click this button to add a new row of hierarchical appearance settings to the grid.
.topic 16811
Use this grid to define hierarchy appearance settings. Each row in the grid represents a level of the hierarchy. For example, the appearance settings you define for the first row apply to the top level of hierarchy, the settings you define for the second row apply
to the second level, and so on.
.topic 16813
Click this button to delete the selected row of hierarchical appearance settings from the grid.
Note how the entry at the top - which relates to the What's This Help that doesn't work - appears differently to the other entries which do work. The name of the ID appears after ".topic" rather than the appropriate ID number.
Any help that anyone can provide me with would be very much appreciated.
Thank you,
Mark

Its working now. We just kept trying to reinstall the tools and restarting indesign. On the 4th time the buttons started working. I can't explain why it finally worked, just that it is working now.

MRP is not working for one material

Hello,
I've run MRP without problems, but now I have a problem with one material. It is strange because if I copy that material with MM01, create the BOM and the run the MRP, everything works fine with the new material, but not with the old one.
Any idea why it could be not working, while the copy works perfectly?

hi
First of all check have u maintained MRP parameters correctly
( MRP type etc.)
Though u have created BOM but if parent material has no requirement then it will not create any requirement for ur created material so check whether parent material is applicable for MRP or Not
Vishal...

In app navigation not working for one office member

We are in the process of laucnhing 4 new magazine apps for January. One of the members of our team is having issues with one specific action. At the bottom of each content folio, we place a button that says go to top. This button links you to the first page of the folio. We used to accomplich this by using the navto:// command in the button panel. For instance, navto://articletitle_v. Then we started using the go to first page command so that everyone could continuatlly reuse the same button among brands and not have to put in navto commands for each folio anymore.
This process works for every single person on the team (5), except one. We are all using the same setup, and the same version of the toolset. Everything else this member of the team does works fine when tested, including navigation buttons from article to article. However, we just cannot get the go to top feature to work. We have tried both methods, the navto:// and the go to first page method and neither will work when we test her issues. I have also made random rectangles on this person's machine and set them up to take you to the top, just to see if there was something wrong with the graphic. Even these new graphics wont take you to the top. As a work around someone else on the team has to open the files and put the go to top buttons in and everything works fine.
Has anyone run into this and if so how did you resolve it? This is one of those things that is going to keep me awake at night i can tell.

Its working now. We just kept trying to reinstall the tools and restarting indesign. On the 4th time the buttons started working. I can't explain why it finally worked, just that it is working now.

Submenu button like GoTo.. on CRM PCUI screen is not working for one user

We have CRM Service scenario implemented with PCUI screens. For one particular user, GoTo button does not work on her PC. When I login as her on my PC then it works. So something wrong with her PC or Internet Explorer. What should I look for?
Thanks,
Manish

Hi Manish,
It means you are getting a JavaScript error. It will be seen on the left corner of your browser. Please compare your IE setting with your colleagues IE settings. This should solve the problem. Incase you still get the problem then try to refresh the screen. The problem should not be there.
Regards,
Hemanth

Account search functinality is not working for one user in portal

Hi friends,
We have configured E.P 7.0 with CRM 5.0 and configured CRM PCUI business package.
We have a role called <b>accounts and products</b> in portal. So accounts can be searched in this role.
Now our severity issue is for one of the super user,for ex su1, accounts search is not working in portal but the same is working in CRM GUI.
for example if we search for an account 233445(or any other account) in portal its showing no data found but if we search with the same criteria data is displaying CRM GUI.
We have checked with other 2 super ids. Both ends portal and gui search is working fine.
Am unable to figure out whats the cause of the issue as search is not working only for one user su1 .
we have checked by restarting the server also to clear the memory cache.But still search is not working in portal.
Could anyone of u please advice ASAP as this is severity issue.
Thanks & Regards
Sireesha.

Hi srinivas,
I have checked both the users credentials,permissions,groups in the GUI and also in the portal.
Both of the users profiles are assigned as same.
Could you please advice is there any other way to check it out?
Regards
Sireesha.

Sales BOM is not working for one Distribution Channel

HI Gurus
In VA01, Line item, for material A Sales BOM is working ( Bom exploded ) for one distribution channel but not for other distribution channel.
Material A is defined already for other distribution channel ( for which sales bom).
Sales BOM ( CS01) is also define.
Regards\Adnan

this is solved by myself. Component ( child ) material was not defined for that Distribution channel.

Save button is not working for ONE CLICK ACTION

Hi All,
We have embeded a custom table view in a standard component.While we are editing the first row of the table view by ONE CLICK ACTION & pressing the SAVE button of overview page,then the record is saved in the database. But if we edit any row other than the 1st one,the save button is not working.
We have used transaction context here for simple object.
lv_tx_ctxt = lr_ent_bt->get_transaction( ).
my_tx_context->add_tx_context( lv_tx_ctxt ).
Please suggest how we can focus on the current line which we are editing & can save the record in database?
Thanks.

Hi Hakan,
Probabaly this is not my problem. I know that how bt one click we can get the desired row.
Let me briefly explain you my requirement and currently where I am stuck.
I have a assignment block ( custom) in the main overview page with a custom table view ( ie in the view we are displayng entries in the table view ) and the user can press edit button on any row and that will open the particular row in edit mode . User will change the value in any of the columns and press save button on the main component and the custom changes will be saved in the database.
Now the problem that we are facing is when we are chnaging the first row it si working but when we are doing chnages in the 2nd row or 3rd row changes are not saved ( not even in the table view that is getting displayed) .
*Let me briefly tell you the approach that we took . Since our table view uses a simple object ( which is not a related object with BTORDER so we need to explicitly save the simple object entities to transaction context and for doing that we have redefined the eh_onsave method in the overview page) .
*Now the save button is in overview page so to pass the entry from our custom table view to overview we are using custom controller . The custom controller 's collection wrapper only has the first entry of the table view custom_controller->collection_wrapper->get_next is failing which is the reason why the 2nd entry is not getting saved.
Can you tell me how i can get all the table entries in my custom controller's collection wrapper?
Let me know if you have any other questions.

Link is not working for one role. how to check please guide.

Hi Expert,
I have a simple question but as don;t aware of some of the techincal area not able to understand where to check.
I have a link under document flow in offer( opportunity) where for one role sales support user the link is not happening. I have checked for other role its working fine.I understand that for this role the link will not work as per the role maintianed.
But where this link got maintained and how i will be able to check which link is tagged to which profile.
rolewise mappeing with link.
Please guide.
Prem.

Hello Prem,
Please check the navigation bar profile from your business role.
Then go to the navigation bar profile settings, you can find the details settings there.
If it is a link under some work center, you need to start from the work center.
If it is a direct link, then start from the derect link group.
Hope this could be helpful.
Best regards,
'Maggie

Report Export - Spreadsheet not working for one User: ECC6, SAPGUI710

Hi,
Our setup: SAP ECC6, Solaris10, Oracle 10g, SAPGUI Patch 9
Normal download like List ->export ->Local file is working
But when user click excel icon (list ->export->spreadsheet) it is not working and even it is not giving any error message.
Only one user ID we are getting problem, all other user ids are ok.
There is no issue with his work station or SAP GUI patch level as for other user id on his workstation export function is working fine. One more info with this problematic user id export function is not working in any workstation.
Any thing we need to do with user parameters/user settings or authorization????
Anyone faced this problem eralier . . .
Advance thanks

It is not hte problem with workstation, as for other user ids on his workstation working fine. Also with his user id on other machines also not working.
Regarding trace in ST01, how to switch the trace for other users as there is no user selection option???
Is it ok if I procedd as below:
1. ST01 -> Edit menu ->Write to database
2. Selected all trace components
2. General Filters ->under "Trace for User Only" I give this problematic user id.
3. From menu "Goto" ->"Save Trace file in" I give this user id, client and time
But I am getting following message when I click "Analysis"
No records that correspond to these search criteria found
regards

Firefox 4: have 4 users and its not working for one. The actual Firefox search bit doesn't load properly: very bare and search doesn't work . However, bookmarks etc seem OK

Have just upgraded to Firefox 4 today, and seems OK for 3 out of 4 users, but not for one of us. It's just that bit in the middle with the red fox logo and the search box that don't load properly - looks very bare - and can type into box but nothing happens when press 'search'

Don't know - the bit in the middle of the web page which sounds like the search container!
However, have found a work around - opening up Google and saving that as the home page.
Thanks for your reply.

Value help does not work for ONE person only !

Hi,
we have a strange problem. In the Web IC, we are using a standard value help for the country field for a Business Partner. This works fine for everyone (ie, it picks up the country and slots it into the field) except one person. For her, it never returns any value into the country field. We are guessing that it's not Web IC related but is something in her browser settings etc...but haven't been able to pin it down. Can anyone offer any advice on this ?
thanks for looking.
Malcolm.

Hello Malcolm,
If this error occurs for one user only it's definitely related to the clients PC.
Did you already delete all temporary files and the cookies on that PC? Usually this does the trick!
If this does not solve the problem, try to let that particular user login on another PC where the problem does not occur. (If the error does occur on another PC too it's probably profile/authorization related)
Hope this helps!
Regards,
Joost

CFL Not working for one of my UDF

Similar Messages

Maybe you are looking for