CFM2 Activate the Integration Model

Hi Gurus,
I have created the integration model using CFM1 and when I try to activate the Integration Model in CFM2 I get an error "OUTBOUND QUEUE BLOCKED".
SYSTEM: PAPCLNT400
FUNCTION: /SAPAPO/CIF_PROD_INBOUND
TEXT: THE ABAP/4 OPEN SQL ARRAY INSERT RESULTS IN DUPLICATE
I am getting this error in Production, but when I try it in QA System it works fine.
I am unable to figure out the issue.Please help me with the solution.
Thanks,
Deepthi

Hi Deepthi,
Try these steps for analysing the error.
Run transaction CFM2 and you will come across the same error (THE ABAP/4 OPEN SQL ARRAY INSERT RESULTS IN DUPLICATE).
2) Go to APO and run transaction /SAPAPO/C3.
3) In TIME RESTRICTION Section on the screen enter tentative time the error must have occured (This step is more from getting nearest log that has been written)
4) In the LOG CLASS select "Only Important Logs" and then execute (F8).
The log will get generated and will provide you some input for your analysis.
Hope this helps you.
ASHUTOSH

Similar Messages

  • Transaction for activate the integration model

    hi,
       i created integration model using cfm1 transaction , how to activate the model ? in which transaction.
    regards
    muthuraman.d

    Hi Mathuraman,
    you can use the transaction CFM2 to activate your generated Integration Model. This transaction is used both for activation and deactivation of the Integration model.
    For Initial transfers you can  use the program RIMODINI also.
    Let me know if it helps.
    Regards
    Gaurav

  • Dump is program RIMODAC2 - Activate/Deactivate integration model

    Hi APO guyz...
    Background job of program RIMODAC2 - Activate/Deactivate integration model fails with following error "TSV_TNEW_PAGE_ALLOC_FAILED"..
    Can somebody tell me what is the reason behind that and how can we resolve it...
    Thanks a lot !!
    - D

    job in  failed with a memory space problem or too many orders are read.Generally when reading large datasets of the table  a short dump occurs with message TSV_TNEW_PAGE_ALLOC_FAILED.
    Please rerun the IM model , it will resolve the issue or split IM data into 2/3 IM so that volume is distribute which may resolve your problem.
    Also if IM is set up for all the object together , please split IM for individual object.
    If problem still persist than check for OSS message.
    Note 903715 - Initial data transfer: TSV_TNEW_PAGE_ALLOC_FAILED
    Note 137932 - Short dump TSV_TNEW_PAGE_ALLOC_FAILED in LCOIAU05
    Manish`

  • Cannot Activate the Integration Process

    Hi Friend,
    File Merging:
    ==========
    I wonder why the receiver step not taking the " Use Correlation" or "Activate Correlation" value even after creating the correlation list and check(F7) the same.
    At receivers step in Graphical Definition(BPM) I can see the red question mark against Activate correlation value, I can see the value to choose. But when I choose the value and save the value does not stay there it disappears.
    I feel that the correlation list value is not been activated and hence unable to use it for the receivers steps.
    When I activate the Integration Process, below is the error message appears.
    Activation of the change list canceled
    Check result for *Integration Process kanchuBPM_IS | http://kanchuBPM_merge.com:  *
    Step does not use any correlations 
    Step does not use any correlations
    One more information:
    Used steps in BPM....
    Fork :  Fork1
    Receive: Receive1
    Receive: Receive2
    Transformation: Transformation1
    Send: Send1
    Here the problem is at Receive1 and Receive2 steps. - Unable to choose the correlation value created.
    Regards,
    Venkat Ramana K.
    Edited by: Venkat on Dec 9, 2008 3:09 PM

    Hey Carlos,
    Did the SXMB_MONI and IP.
    Got th ebelow error message:
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Unable to figure out what could be the problem..
    Please help me and guide me in detail to clear th error .
    Regards,
    Thank you.

  • How do I install and/or activate the "Channels Model.InDesignPlugin" for InDesign CC 2014?

    I need to package my files today for an online class using InDesign CC 2014 and I keep getting this error message:
    Where and how do I either install or activate this plugin?
    Thank you for any help provided on this matter.

    Hi, Larry
    Thanks for responding. Yes: I have tried  both ways: First to Save file, then Export to .idml, then reopen to package while inside InDesign  -and- as Save file, Export to .idml, Save, Close file, then Reopen as .idml, to package. I also tried a straight out export to PDF and all I get is a blank page with registration, bleed, and crop marks.
    Very weird and frustrating. I checked my Extensions Manager just to make sure I didn't miss anything or if I could activate it from there. Channels Model.InDesignPlugin or anything resembling that does not exist. I have been searching on Google to see what I can find. My instructors are aware of the issue so far but this is greatly impacting two of my classes.
    Last things I have tried were a full uninstall and re-install  since my last post just to see if that would work. Nothing. Same issue still. The .indd verison opens per usual with missing three types of plugins that are YTDChannel related. Even though if I don't need this plugin as mentioned previous by /u/jmlevy, then why is everything coming up blank?
    Thanks to everyone trying their best to help me.

  • CIF user exit works for Integration Model only when we De-Activate

    Hi Friends,
    I have enhanced the CIF User Exit [EXIT_SAPLMEAP_001] and populated the code in Include ZXCIFU14 for calculating the value of Open Order Quantities[OOQ] with respect to Material, Plant and Contracts, PO's then It transfer the OOQ from R/3 to APO.
    Here it is Triggering the User Exit and working fine only when we De-Actrivate and Activate the Integration Model thru CFM3.
    But In case of PO changes it is automatically calling the User Exit and Trasfer the OOQ from R/3 to APO.
    When we change the Master Data it is not triggering the User Exit Automatically.
    Could you someone suggest why we required to De-Activate the User Exit when we run the Integration Model every time.
    Please suggest if we need to follow any pre required steps and why this behaviour for User Exit [EXIT_SAPLMEAP_001].
    Waiting for your answer......Thanks in advance.......
    Regards,
    M N Kumar

    Hello,
    Could you please provide details about the master data you mentioned in your query. This exit is called for PO, PR ,confirmation, shipping notificatoin objects.
    Rgs- Vikas

  • Integration model activation

    Hi All
    Goal : To activate the Integration model
    Right now, we are working on quality systems (both ECC and APO). There is a Int.Model for masterdata from ECC to APO. The Integration model is not getting activated.
    Reason: In APO under /sapapo/cq we have these line items "Base unit of measure for product X cannot be changed' (several hundreds of materials).
    Looks like there is a mismatch of Units of measurement for the same product in ECC and APO. For now I am matching the Units of Measurements in both the systems, but its kind of cumbersome because there are several hundreds of materials in the queues.
    Also, suprisingly there are some products whose Units of measurements *match* and are still in the line items (queues)
    Is there any better way to address this and activate the Integration model?
    Thanks
    Pooja
    Edited by: Pooja Challa on Sep 29, 2009 9:03 PM

    Hi Pooja,
    It is not advisable to change the base unit of measure in R/3 for the materials which have been transferred to APO. But it may be necessary to change it in R/3. During that time SAP is kind enough to give the warning.
    I am not sure how many materials are there in R/3 whose unit of measure has changed. If it is possible to find out using some kind of change document report then it will be good input to next step.
    Next step would be to maintain new base unit of measure of the material in the R/3 system is created as an alternative unit of measure of the product in APO (transaction /SAPAPO/MAT1, 'Units of Measure' tab) so that the units can be converted in APO if necessary.
    Since you only change the base unit of measure in an R/3 system in exceptional cases, it is assumed that you will subsequently change the change material manually in APO.
    Thanks and Best Regards, Manoj
    PS: I would encourage you to have look at following notes:
    Note 832595 - Product: Base unit of measure cannot be changed using CIF
    Note 809596 - Product: Base unit of measure must not be changed

  • Issue with CIF Integration model for Transaction data

    Hi Gurus,
    I have activated the Integration model for PO & PReqs by location wise and i assumed that transaction data is online and we need not to re activate for any new Product / location combination got created in system.
    But the issue is that every time a new material got created, we need to deactivate and activate the integration model for Transaction data to get the transaction data into APO.
    Is there any way to avoid the following exercise as it is taking very long time for activation.
    Please guide me as it is very urgent.
    Thanks for help in advance...
    Thanks & Regards,
    Jagadeesh

    I assume 1,60,000 location products are spread around different locations.
    Rather than one Integration Model it is better to have multiple Integration Models.
    For example: one for each region like North America, one for Europe, one for Asia (assuming you have countries spread across the world). Or create Intgeration Model by Country.
    This way you reduce the number of Products in an Integration Model.
    It is very important to have manageable set of Integration Models. Let me give an example - you have some problem hence the single Material Master Integration Model is down (inactive). At that time any PP or PDS transfer will not have the Header or COmponent products transferred to APO (in effect PDS/PPM cannot be transferred). If you are creating or converting Planned Orders they will not transfer to R/3 (as Header product is not part of active intgeration model).
    But if you have country spefic or region specific Integration Model - only that country is affected not all.
    In fact you should have other integration model (like PDS/PPM, Procurement Relationships, Planned / Production Orders, Sales Orders, Stocks) in same manner i.e. either Country(s) specific or group of countries by region. The risk of models getting inactive or taking too much time to activate after regeneration easily outweighs management of more number of Integration Models (compared to one Global integration model per object).
    Hope this gives you some direction.
    Somnath

  • Problem with activating integration model

    When I am trying to activate an integration model, that includes a scheduling agreement (type LF), the activation isn't successfull. It isn't blocked, but it never stops.
    In the screen I have a message called "determining delta model" but it never continous with executing the activation.
    Does anybody know what could cause this problem?
    thanks in advance
    Mark Smeets

    Hi,
    I am facing the same problem as mentioned in the original post.
    Whenever I activate the integration model for vendors, a "CIF_LOAD" window appears with message "Should interval be created" with YES and NO option. Why does this window appears. After clicking on NO option the message "Determining delta model" appears in the status bar and after some time the program gets terminated due to time out.
    I have tried following solutions mentioned in this thread.
    Refreshed the indexes of the two tables BDCPS and BDCP using DB20.
    Executed the transaction BD22 in test run mode, but I am not sure which change pointers option(obsolete or processed) to select for deletion and also which message type. I selected the obsolete option but here too the program got terminated after time out. Besides I am doing this on prduction environment and other integration models like plant etc got activated.
    Please help us with this.
    Regards,
    Gaurav Patil

  • Problem with activation of integration model

    Hi,
    I am facing a problem. Whenever I activate the integration model for vendors, a "CIF_LOAD" window appears with message "Should interval be created" with YES and NO option. Why does this window appears? After clicking on NO option the message "Determining delta model" appears in the status bar and after some time the program gets terminated due to time out.
    I have tried following solutions.
    Refreshed the indexes of the two tables BDCPS and BDCP using DB20.
    Executed the transaction BD22 in test run mode, but I am not sure which change pointers option(obsolete or processed) to select for deletion and also which message type. I selected the obsolete option but here too the program got terminated after time out.
    After this I selected  the message type "CREFET" (Get Vendor Data), "CRECOR" (Core vendor master data distribution), "CREMAS" (vendor master data distribution) but there were no change pointers for this message type.
    Besides I am doing this on prduction environment and other integration models like plant etc got activated.
    Please help us with this.
    Regards,
    Gaurav Patil
    Edited by: Gaurav Patil on Sep 29, 2008 12:35 PM
    Edited by: Gaurav Patil on Sep 29, 2008 12:36 PM

    Hi Gaurav,
    Please split the volume in multiple jobs and see wheather it is running fine or not ?
    Also please check CFG1 log on R/3 side .
    Also check SLG1 log on APO side .
    Manish

  • Integration Models

    Hi Everyone,
    I am trying to activate the Integration Models in ECC.
    I get message the following message:
    "should the interval be created"  options - YES, NO.
    I would greatly appreciate, if you could help me understand, what this means.
    Thanks & Regards,
    Akshay

    Hi Akshay,
                 This is the CIF customizing error.
    This might because of material no. ranges or respective master data and transactional data no ranges are not created in both sides: ECC and APO.
    Please check both Customizing places ECC in APO.
    Also make the settings for Transactional data no ranges : e.g. Production Order, Sales order etc.
    Hope this answer will give you some idea.
    Please also check the Link:
    http://help.sap.com/saphelp_scm50/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
    Regards,
    Vishal

  • Creating integration model

    I have created an integration model using CFM1 & activated in CFM2.
    now  dont know how to proceed.
    is there any document or link to transfer data from R/3 to APO system.
    i m new to this field & trying by own.
    Thanks in advance.

    Best way of creating CIF integration Model
    Hai,
    Please go through the above thread which can help you for understanding more about the integration models creation.
    You have mentioned that you have done CFM1 and CFM2. Can you please inform for which object you have done and what you would like to see in APO?
    Giving more details would enable helping you better.
    Regards,
    Murali.J

  • Deleting an Integration Model.

    hi Guys
                   if any kind of changes happens in master data in ECC then we transfer that data in SCM,then what happens with that planning data with which we work earlier.
    And Deleting an integration model does not mean that the previously selected data in APO is also deleted.what happens of that data.
    thank u
    karan
    Edited by: karan.sap on Feb 27, 2010 6:36 PM

    Hi Karan,
    1) if any kind of changes happens in master data in ECC then we transfer that data in SCM,then what happens with that planning data with which we work earlier.
    As and when you activate an integration model, a new integration model gets
    generated and the earlier one will get deactivated.  (provided the model name,
    model selection criteria are same).  That means the newly changed master data
    will get activated to SCM system in which the old change is obsolete.
    2) And Deleting an integration model does not mean that the previously selected data in APO is also deleted.what happens of that data
    Whenever a new model gets generated, the old model will be there in the system
    only and that inactive models needs to be deleted at frequent intervals orelse
    it will add inconsistency to the system.  This will be done using CFM7 transaction
    by selecting inactive models indicator.  Whether the old model is deleted or not, but
    system always will read and plan as per the newly activated model.
    Regards
    R. Senthil Mareeswaran.

  • More than one CIF integration model possible for material?

    Hi Gurus,
    we want to have two different integration models (with non-overlapping selections) for materials to be able to have separate selections, but we cannot make it work.
    When we create them the first time and then activate them, everything works fine: both models send their products to APO in the initial load. However, if there are changes in products in both models, when we generate and then activate one of the models, the changes in the other one are lost: the generation-activation of the second model does not send any product to APO even if there were any changes in the master data (and we see the ALE pointers as processed in the table)
    Is there any workaround to solve this issue in a system without CIF pointers in BDCP2?? The ECC system is below the relevant releases and will not be upgraded in the near future.
    We could not find any mention to an existing limitation on the number of models being one neither in OSS notes nor the help pages.
    thanks a lot,
    Pablo

    Pablo,
    It is common to have multiple Integration Models for Materials.
    I have never heard of transaction BDCP2.  I also have never seen the problem you describe.
    I usually prefer not to use change pointers at all for Master data, such as Materials.  You can alter this behavior in CFC9, and instead use Business Transfer Events.  This means that all fields that are relevant for 'change transfer' to SCM will move across almost immediately after saving the changed material master.
    http://help.sap.com/saphelp_scm70/helpdata/EN/c8/cece3be9cd4432e10000000a11402f/frameset.htm
    Also read the links contained in this page.
    If you wish to actually perform a new 'initial load', then run the Integration model through program RIMODINI.  It may be a lengthy run.
    As always, check first in your Qual system before committing to production.
    Best Regards,
    DB49

  • Reactivating integration models

    Hello All,
    I deactivated a big sales order integration model in my production system. While trying to reactivate the RIMODAC2 program is taking huge time(30 mins) to complete for 5 part-plant combination. I have around 100K part-plant combinations.
    Is there a short cut to reactivate? If there is some alternate program to somehow reactivate the models.Any help will be greatly appreciated.
    Anyone ever had such a situation? Any ideas.
    Thanks and regards
    Sanjeev

    Hi Sanjeev,
    There is no short cut but I can explain you a way.
    First please confirm that only one transaction data integration model was inadvertantly deactivated.
    Second - the steps I mention below should be carried out with "care" and after notifying business users suitably as you have to do this when there is mimimal activity in the system.
    Broad steps:
    1. Stop the CIF Queue by going into /SAPAPO/OM17
    2. Activate the sales order integration model
    3. There should be queues created inbound to your SCM/APO system (check in SMQ2)
    4. Wait till all queues are created for the Sales Order Integration Model and make sure you see the CIF_GEN_EVENT queue (last queue which after going to SCM system returns to R/3 ERP system and marks the Integration Model as active)
    5. Delete all the CIF queues for the Sales Order Integration Model except the CIF_GEN_EVENT queue.
    6. Start the CIF Queue - the CIF-GEN_EVENT queue should process
    7. Confirm that the Integration Model is activated in R/3
    8. Run Delta Report (/SAPAPO/CCR) and resolve any differences
    Disclaimer: This is not a SAP documented solution.
    Hope this helps and works out for you.
    Thanks,
    Somnath

Maybe you are looking for