CFM2 Outbound Queue Error
Dear Experts,
We are getting following error when we start activation from transaction /CFM2
Outbound Queue Blocked
System: CAQCLNT001 User: SAP_ADMIN 05.02.2010 10:33:1
Function/Q/SAPAPO/CIF_PROD_INBOUND
Text: Logical system CCQCLNT224 has not been assigned
How can we fix it,
Best Regards
Edited by: Wilian Segatto on Feb 5, 2010 8:04 AM
This error is because logical system is not assigned to Business system group.
First ensure that you are using correct logical system name while creation and activation of integration model.
If it is correct go to path SPRO-integration with sap components- Integration via core interface-Assign logical system and queue type assign this logical system to proper buisness system group.
Hope this helps.
Santosh
Similar Messages
-
Hi All,
I have some "qRFC Outbound queue errors" in the production system of R/3 and the target system is CRM.
The status is "SYSFAIL " .
Can anybody tell me how to solve them.
Regards,
AnindyaHI Anindya,
It's a very simple error. You have to check with your Security System Administrator if the user has included in your profile the authorization object S_RFCACL. Before this you have to define RFC Trusted / Trusting Systems in your Landscape.
Reward Points if helpful
Cheers
Manohar -
Hi,
My scenarion is File-> XI -> iDoc. After the logical routing is complete I am getting the following message
"Leave pipeline processing after LR because of receiver-wise queueing"
And the XML message is put in status 12 = "scheduled for output processing"
Any clues why ?
Regards
SatinderHi,
Thanks for your responses. I have a problem in XI inbound queues. File adapter is picking up the file of size 373 KB. The message was scheduled for processing. When I check in trace I am getting the above error. After some time message fails. When I chunk the file into two, Interface is running successfully. I am facing this error only for this interface. For another interface which is similar scenario I am able to send 48 MB file successfully.
Any thoughts where could have been the problem.
Thanks,
Yoganand
Edited by: Yoganand Agnihotram on Dec 11, 2009 10:17 PM -
Outbound queue blocked in CFM2
Hello folks,
I am trying to activate the integration model in CFM2 and I am getting message
"Outbound queue blocked"
Function/Q/SAPAPO/CIF_PROD_INBOUND
Text: NOSENDS
When I try to manually send the data in the queue in SMQ1 in the r/3, system asks me login to the SCM system and even though I give proper login, queue fails with the error message "Password logon no longer possible - too many failed attempts".But there is no issue with the login credentials.
Can you please helpme out here.
Thanks,
VikramHi
Although you may be entering the correct user and password, the user may now be locked. You need to check if the RFC user is locked and if so unlock then try again.
Regards
Ian -
Hi Guys
When I create or modify a customer in CRM to ERP is not replicated, in the outbound queue indicates CRM SYSFAIL error that says:" Gruping is not assigned and account group in IS-M".
Please help my!
Thank you
winstonHello Winson,
Please check wether you have note 1294123 appied.
If the problem happens although the note is applied in your system, please creat SAP customer message to report this error.
Thanks and regards,
Maggie -
Error in Outbound Queue while Releasing order from CRM to ECC
Hi,
When I release my sales order from CRM to ECC, I got an error in Outbound Queue saying "Screen output without Connection to User".
This is occuring in FM : BAPI_SALESDOCU_PROXY_UPLOAD
Can you please tell me why this error is coming?
Thanks,
SandeepHello Sandeep,
During the RFC call from CRM to ECC, this is a background processing, the screen call is not allowed.
If a call screen is executed, there is the mentioned error.
Please check in your ECC system, whether you have any user exits that have the coding 'call screen'.
Best regards,
Maggie -
Error in outbound queue. Packed field contains incorrect BCD format
Hi,
Can anyone please help me with this.
In the outbound queue of CRM, the queues are stuck up in SYSFAIL state.
The error is ' Packed field contains incorrect BCD format.'
Can anyone suggest what this could mean?
Regards,
PratimaHi Pratima,
In the CRM Server, the structure has more fields than in the R/3 System. Fields BAPISDIT-TAX_AMOUNT, BAPISDIT-CR_EXCHRAT_V and BAPISDIT-EXCHRATEST_V have data type 'DEC' and do not exist in the R/3 System. During the initial download, the fields receive the value '020202...' and cause the termination "The packed field does not contain a correct BCD format" in function module CRM_SALESDOC_MAP_BAPI2MBDOC.
Use Transaction SE11 to add the following fields at the end of structure BAPISDIT in the R/3 System:
PLANDLVSCH PLAVO CHAR 4
SEQUENCENO CHAR35 CHAR 35
CREDPRIC UMREFF FLTP 16
PAY_GUARAN CHAR2 CHAR 2
GURANTEED UMREFF FLTP 16
CFOP_CODE CHAR5 CHAR 5
TAXLAWICMS CHAR3 CHAR 3
TAXLAWIPI CHAR3 CHAR 3
SD_TAXCODE CHAR2 CHAR 2
VALCONTRNR CHAR10 CHAR 10
VALCONTRIT POSNV NUMC 6 *
ASSORT_MOD W_SORTK CHAR 18 *
VALSPECSTO KZBWS CHAR 1
MATGRHIE1 CHAR18 CHAR 18
MATGRHIE2 CHAR18 CHAR 18
PROMOTION KNUMA_PI CHAR 10 *
SALES_DEAL KNUMA_AG CHAR 10 *
FLGLEADUNI CHAR1 CHAR 1
FREE_GOODS CHAR1 CHAR 1
VALID_OBJ TECHS CHAR 12
TAX_AMOUNT BAPICUREXT DEC 28
MRP_AREA BERID CHAR 10
CUST_MAT35 CHAR35 CHAR 35
CR_EXCHRTV STCUR_AP DEC 9
EXCHRATSTV STCUR_AP DEC 9
or Implement SAP Note: 498317.
Thanks -
Middleware problem -Outbound queue is stuck in SAP R/3 system with message
Hi Middleware gurus ,
We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message STOP .
There are two queues generated in SAP R/3 system with names MASS_CRM_CUSTOME and R3AD_CUSTOME . The status for both the queues is STOP and when go for details it mentions sapsuck ..SAPMSSY1 -Message no. SR 053.
Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
We really dont as to why the Initial load worked fine with 2 BPs and later when want to do more BP Initial Load the Outbound queue is getting stuck
Also , by unlocking the 2nd queue R3AD_CUSTOME we are able to release it , but the first queue MASS_CRM_CUSTOME* is stuck
Please help us urgently
Regards
Dinesh and Ritvij
Email : [email protected]
Mobile -+91=9704933315Hi Praveen and other Middleware gurus,
We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
An RFC link is not maintained in the Middleware
Message no. CRM_BUPA_MAPPING051
We have set the RFC link , but still the problem continues!!!
Please help further..
Regards
Dinesh and Ritvij -
Outbound Queue stacking up for old destination
Hi Gurus,
I am implementing APO in a client and since the native integration (CIF) uses the same RFC structure as BW I need to keep an eye on BW processes as well.
The problem here is that they´ve migrated to BW7, killing the old 3.5 but leaving the logical system registered.
Now what is happening is that I found >4million queues in SMQ1 to this nowhere destination, which kills my CIF performance.
We´ve started to clean this garbage but the stack keeps adding up from regular goods movement transactions. The BASIS and BW team is not helping much so:
I need to find where I set the relationship between theses transactions and the destination so it does not go to the outbound queue.
thanks for the help!Hi Anand,
Please go to SMQ1 and in qname enter cf* and then execute.
In the error screen press F8 and then select all PPM related queues and delete.
After that run IM after correction and do run CCR report for the reconcilation by tcode :/SAPAPO/CCR .
Manish -
Recreate the BDOC for the BP, by running the transaction CRMM_BUPA_SEND
1. Display the BDOC in SMW01
2. Enter /h in the transaction code field
3. Press the 'retry to process message' button.
4. In the debugger - select the Settings button and 'In background task
do not process'
5. Enter F8
6. Create a new session for the outbound queue (/osmq1) there will be
an entry R3AUBUPA*** or CSA_BUPA**
7. Double-Click on this queue entry twice and choose Debug for the
CRM_UPLOAD_TRIGGER
8. In the debugger, set a breakpoint at statement 'CALL TRANSACTION' and then press F8.
9. At this statement double-click on the statement CALL_TRANSACTION and
change the variable CALL_TRANSACTION_MODE from N to A, press the
'change field content' button and then press F8
10. Now you will be in the R/3 System and you can see the batch input
screen for this customer and you will then be prompted for the
missing field in the BDOC.
When the field has been identified, please maintain this field in CRM
and then reprocess the error BDOC.Hi Stephen,
The user is a dialog user. Moreover, I have manually put an external breakpoint where it calls the function module CRM_UPLOAD_TRIGGER and debug the application when I go click on save in transaction BP. Even when I change the value of lv_synchron in the program LSMOUTILU44 to X so that the function module does not process in the background, I still cannot enter the function module.
The error I am getting is of type E02. Some of the mandatory fields are missing. Despite removing all mandatory fields, I am getting this error.
Can anyone throw some light on this issue please.
Regards,
Abdullah Ismail. -
Detected Blocked Outbound Queues
Hi All,
We have found detected Blocked Outbound Queues in SMq1 CRM PROD System and we have checked log , its shows below log.
400 R3AUBUPA0008063715 RP1CLNT400 4 CPICERR A3A4176F143C4F3031E8C711 06.02.2012 20:02:48
400 R3AUBUPA0008063722 RP1CLNT400 4 CPICERR A3A4177004E04F3031E9148F 06.02.2012 20:02:49
400 R3AUBUPA0008063751 RP1CLNT400 4 CPICERR A3A4176F174C4F3031E9C4BB 06.02.2012 20:02:49
400 R3AUBUPA0008063753 RP1CLNT400 2 CPICERR A3A4177002984F3031EA5DFE 06.02.2012 20:02:50
Status shows CPICERR ,Error when opening an RFC connection .
But i have checked RP1CLNT400 test connection is successful .
Kindly suggest .Hello,
Check the following notes:
[378903 Queue status in SMQ1, SMQ2 and table ARFCRSTATE|http://service.sap.com/sap/support/notes/378903]
[430980 CRM Server: Analysis in delta data exchange R/3->CRM|http://service.sap.com/sap/support/notes/430980]
Regards,
Eduardo Rezende -
Struck up with R3AD_* Queues in SMQ1(Outbound Queue in ECC Side)
Hi ,
I am using CRM Middleware for replicating business partner(BP) from CRM to ECC
and material from ECC to CRM.
BP and Materials are replicating well.
My Issue is,
while checking queues in SMQ1 (Outbound Queue in ECC Side), i am getting many queues are pending also
status as "SYSFAIL".
QUEUE Names are R3AD_000000123,R3AD_000000139,R3AD_000000141... R3AD_*,etc..
I tried to unlock the queues and activated, afterthat also queue status is "SYSFAIL". Then i checked in CRM side
Transaction Code SMW01,
BDOC Details:
BDOC State Description: Information no processing.
BDOC Type :BUS_TRANS_MSG.
ERROR Message:
a.Processing of document with GUID 4E57E4A5108162A7E10000000A0BE02A is canceled.
b.Business transaction type ZEQQ does not exist.
c.Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
Thanks and Regards,
Ravi AMaintain a filter in ECC go to Tcode SM30 , then go to table/view and enter CRMRFCPAR click maintain and enter
User CRM
Object Name SALESDOCUMENT
Destination xxxxxxxxxxxx
Load Type delta download
Queue Name
Queue Name
BAPINAME
INFO
InQueue Flag X
Send XML
CRM Release 700
Logical system xxxxxxxxxxx
this will stop the flow of ecc sales documents to crm
this will also stop Bdcos in SMW01
Please let me know if this helped -
Outbound queue locked due to incorrect password
Hi Gurus,
I'm having a problem to activate an Integration Model as I'm getting an error stating that the outbound queue is blocked due to incorrect password.
I have set up the RFC destination of the SCM ECC logical systems wit a valid user (I tested it). I've changed between using a Dialog user and a Communications Data user. Between every change I made I've cleaned the queue using transaction CFQ1.
Do you have an I idea of what I might be missing?
Many thanks,
DiegoDiego,
It is unclear to me which system you are experiencing the problem on. Either way, the reasons are usually the same. I will address establishing the ECC>SCM link. Works the same way in the other direction.
Every time I have had the problem you are experiencing, I usually find that the fault lies with me, not the system - I have made assumptions that were not correct.
BD54 ensure that your logical system name is what you think it is. Unless you are rigorous in your naming conventions, it is easy to become confused between logical names/hostnames/system names for SCM and ECC, ,
NDV2 ensure that the SCM system is properly identified
SM59 Make sure your IP address, or hostname is right. Make sure the system you are logging onto interactively is the one being accessed in SM59. Make sure you have the right userid. Password is casesensitive on some versions of R/3 and APO, but not casesensitive on others. I always use UPPERCASE text only for PWs, at least until everything is totally debugged.
From a technical standpoint, your RFC userid can be interactive or system, I always start with interactive until the intefaces are totally debugged. You auditors may have an opinion the final settings in the production system in this area..
Rgds,
DB49
I hear and I forget. I see and I remember. I do and I understand.
Confucius -
JMS Outbound Configuration Errors
I'm conducting some tests on JMS Outbound queues with a CEP server. After following the Developer's Guide manual for setting up a JMS Outbound Queue on a CEP server, I'm receiving the following errors on startup:
*<Oct 6, 2010 4:20:12 PM EDT> <Error> <Deployment> <BEA-2045010> <The application context "XMPPMessageEPN" could not be started: org.springframework.beans.FatalBeanException: Error in context lifecycle initialization; nested exception is java.lang.Exception: Error initializing JMS connection: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://localhost:7001: Destination unreachable; nested exception is: java.net.ConnectException: Connection refused; No available router to destination] javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://localhost:7001: Destination unreachable; nested exception is: java.net.ConnectException: Connection refused; No available router to destination]*
I assumed this was all I needed to do. Are there some settings missing for configuring a JMS Outbound Queue that are not in the documentation?
Thanks -- Jim L.
Spring File:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd">
<wlevs:event-type-repository>
<wlevs:event-type type-name="XMPPMessageEvent">
<wlevs:class>com.enernoc.cep.message.event.XMPPMessageEvent</wlevs:class>
</wlevs:event-type>
</wlevs:event-type-repository>
<!-- Password for XMPP Server is encrypted using Enigma -->
<wlevs:adapter id="XMPPMessageAdapter" class="com.enernoc.cep.message.adapter.XMPPMessageAdapter" >
<wlevs:instance-property name="hostName" value="talk.enernoc.net"/>
<wlevs:instance-property name="userName" value="oracep"/>
<wlevs:instance-property name="userPwd" value="HKVJqLcX9D4="/>
<wlevs:instance-property name="waitTime" value="15"/>
<wlevs:instance-property name="diagnostics" value="false"/>
</wlevs:adapter>
<wlevs:channel id="XMPPMessageChannel"
event-type="XMPPMessageEvent"
max-threads="3"
max-size="2048">
<wlevs:listener ref="JMSOutboundXMPP"/>
<wlevs:source ref="XMPPMessageAdapter"/>
</wlevs:channel>
<wlevs:adapter id="JMSOutboundXMPP" provider="jms-outbound"/>
</beans>
Config File:
<?xml version="1.0" encoding="UTF-8"?>
<n1:config xmlns:n1="http://www.bea.com/ns/wlevs/config/application">
<jms-adapter>
<name>JMSOutboundXMPP</name>
<event-type>XMPPMessageEvent</event-type>
<jndi-provider-url>t3://localhost:7001</jndi-provider-url>
<destination-jndi-name>XMPPMessageQueue</destination-jndi-name>
<user>xmppuser</user>
<password>password1</password>
<delivery-mode>nonpersistent</delivery-mode>
</jms-adapter>
</n1:config>Hi Seth,
I'm trying to create a local JMS queue on the CEP server that others can subscribe to. Why would I need WLS to do this?
--Jim L. -
Dear experts,
We have the following queues in our outbound SMQ1 in the ISU-CCS system.
Queue Name
MASS_CRM_CONNOBJ*
R3AD_CONNOBJ*
Destination
NONE
CMQ60TRUST
The queues are stucked when we try to perform initial download from CRM, to extract data from ISU. The further error message that we got in the outbound queue is:
Set by Host name: usahstxu; Transaction: ; Report: SAPMSSY1
Please help!! I'm desperate! This is really urgent Points will be rewarded!!
Edited by: homoSAPien on Jan 7, 2008 8:30 AMoh well
there is another note too!
SAP note: 574774
well why we need to apply that note to CRM server need to be find out.. me also.. has the same question but never care to figured out... but now i ll do that..
this is my mail address : [email protected] if you found it.. please let me know if i found it then i ll mail you..
Regards
Naeem
Maybe you are looking for
-
I have an iPod touch 1st Generation. So, it doesn't come with apps or anything and I want to put apps onto it. I have already bought the new software to put apps onto it and everytime I try to restore and update it says error. I have already got the
-
Transform the schema name with APPLY_DML_HANDELER
Hello: I have referred following notes, but I was trying to transform the schema name from schema_name_A to Schema_name_B in APPLY_DML_HANDELER, which does not seem like working. 264035.1 How To Transform Schema Name In Streams 309575.1 How To Transf
-
UI Script on a headless server
I wrote an AppleScript to that includes some UI scripting using System Events. Activating a menu item for example. I have it installed on a headless 10.6 server and scheduled to run daily. When I am connected to the server via Screen Sharing, it work
-
~~~~~~ Shhhhhh! Hide Them!!!!!!!
How can I hide 20+ pdf files on a cd when I burn it? Put them into a folder? I want one "master" pdf file to show when the cd is put in... Than this one "master" pdf file will have links to the hidden pdf files on the cd. Thanks in advance!
-
Sound issue for Realtek ALC650 chipset
I've read alot in the forums and tried I believe correctly to install this but I don't believe I'm getting the right module. Does anyone have an idea what module (if it's in the kernel) to use or do I have to go about finding the source? and compilin