CFMAIL sending duplicate messages

I am using ColdFusion 11 on a Windows Virtual Server 2008. The CFMAIL tag is producing duplicate messages (3 each time with IE11 and 2 each time with FireFox. Numerous tests have produced the same results. I tested with and without the mail spooler enabled - no change. The code is simple. no loops, no query, no double-click of the 'send' button. I have seen other complaints about this in other forums with the only solution being "to disable CF scripts that start/stop the mail spooler". 1) Does anyone have a suggestion? 2) How would I disable the CF Script to start/stop the spooler? Robert

RM, not your answer, but note that you’ve asked this on the CFBuilder forums. That’s the CF IDE (integrated development environment, or editor).
You will want to ask this on the CF Forum or one of its subforums instead (perhaps the ColdFusion Server Administration one). It and they are listed at https://forums.adobe.com/community/coldfusion.
/charlie

Similar Messages

Receiving and sending duplicate messages since update

I updated my phone on Saturday, 8/9/14, and since then many of my messages are sensing twice and I am receiving messages twice. It doesn't happen every time but almost every time! It is extremely annoying. I have not downloaded any new apps and use the messaging app that came on my phone. Please figure out what is wrong and fix it.

I have been experiencing this issue as well. I received duplicate messages. My phone also sends duplicate messages, sometimes hours later. Please assist with this issue. Information:…
I have been experiencing this issue as well.
I received duplicate messages. My phone also sends duplicate messages, sometimes hours later.
Please assist with this issue.
Information:
Phone: Samsung S4
Android Version: 4.4.2
Software update check: No update needed
Messaging Application used: Message+
Preinstalled Messaging Application: Turned off
Have tried multiple forums for assistance, considering changing carrier if not corrected.

ICal/Mail Issue - To Do's Causing Mail to Send Duplicate Messages

When I set a To Do (either in iCal or by selecting text within a mail message) that is associated with one of my IMAP mail accounts, Mail generates hundreds of duplicate messages that end up in my "Apple Mail To Dos" folder on my IMAP server. I only see one copy of the To Do in my reminders (in Mail) and only one shows up in my To Dos in iCal, but literally hundreds of the same message are sent to my IMAP server.
Any thoughts on why this is happening?

After completely wiping my system clean, and (FINALLY) completely sync'd to .Mac, everything seems to work fine.

I am having problems with my messaging send duplicates messages

is there a solution?

Are you seeing this problem when sending SMS, MMS or iMessages?
For the first two, you might be seeing a carrier side problem.
Try the basics, restart and then restore the iPhone. You can also contact your carrier.

AS2 receiver adapter seems to be transmitting duplicate message to Partner

Hello guys,
we have serious issue in prod. we have a partner with whom we share EDI data using As2 adapter.
let me take eg here
our AS2 id- AAA
partner AS2 id - DDD
first we had problem with them
"could not send asynchron mdn to partner url" but before we rectified this issue ,DDD has upgraded the As2 sofware which solved current issue but created different issue which is described below :
as per partner ,messages are sent twice from AAA to DDD . but AAA is claiming that they dont send duplicate messages
as per DDD sometime they receive whole set of message twice. which AAA cant see at all at their side. but AAA do receive MDN back but with error "MIC not verified # duplicate-document"
so now AAA also have doubt that why the messages are rejected from the DDD when AAA is not sending the duplicate.
but anyone has encountered this problem before ???

Hi Rai,
I have a similar problem.
AAA is send AS2 to DDD and from time to time (not always) I get back an AS2 notification saying
MIC not verified # duplicate-document
Did you find the solution on this?
Regards,
Luis.

Duplicate message checking for inbound idocs sent via http protocol

When our warehouse system sends inbound WMMBXY idocs to us it appears to be checking an internal table in SAP to make sure that the message has not already been processed. This check appears to be related to a unique message ID that is originated by the DC system. This message ID does not appear in the actual idoc it appears to have been removed prior to the idoc being created.
When we restore production data into a test environment we occasionally have problems where the warehouse system fails to post WMMBXY messages with a "Idoc already posted" type message. Can someone tell me where the file is on SAP that holds a log of already processed messages - so that in such cases I can make sure that the warehouse do not send duplicate messages.
Many thanks, John.

hey
if you wanna see your messages you may look in table SXMSPMAST
also have a look at the following thread
In Which Database Table the Messages are Stored in XI
Thanx
Ahmad

Duplicate messages in sender mail adapter

Hi,
We are using the sender mail adapter to retrieve messages from an IMAP mail server. Messages are being picked up correctly, but when we have large messages (with e.g. PDF attachments) things go wrong.
The time it takes to retrieve the mail message is longer than the poll time. In this case the adapter logs in again in the mail server to retrieve the first new message from the inbox. However the first adapter threat is already retrieving that message. This results in a duplicate message in XI. (messages are set to be deleted when read).
We have tried all kind of settings in the adapter but without any results. The adapter works fine with very small messages.
Does anyone recognize this problem?
PS. please do not post links to sap help or the mail adapter FAQ. Useful answers will be rewarded.
Thanks,
Christiaan Schaake

Hi Christiaan !
I understand your problem. Could you set your IMAP account to avoid multiple simultaneous sessions?? maybe if there is only one session allowed per user or per time, then parallel XI threads will not be able to start downloading the messages.
If you cannot use a longer poll interval, then you could develop an adapter module for the Mail sender adapter that could be used to verify if the current mail is just being downloaded by other thread. This adapter module could check the unique mail data (date/time + subject + etc.) against a local table.
Regards,
Matias.
PD: please award points if helpful.
Message was edited by:
Matias Denker

Duplicate Message exception in sender JMS comm channel

Hi,
Can any one please tell me what is stored in MSG_ID1 and MSG_ID2 in table XI_AF_SVC_ID_MAP
I could only find the schema of XI_AF_SVC_ID_MAP table in SDN which is as follows,
MSG_ID1 (varchar),
MSG_ID2 (varchar),
PERSIST_UNTIL (timestamp).
We have an interface in where MQ daily sends 2 files to PI but sometimes one msg is getting discarded by sender JMS adapter giving warning -
A duplicate message was received, it was received earlier and processed with XI Message ID - "xyz". It will be ignored and discarded from the JMS queue.
Also I found that setting option Time Period for Duplicate Check for EO(IO) (secs) to 0 does not always work.
We are getting this problem after upgrading PI from 3.0 to 7.1.
So if any one has solution to this problem please help me.
Thanks & Regards,
Shweta

Hi Shweta
Usually this kind of issue happens when the msg ID in the MQ message header is not unique.
Ask the MQ team to ensure that MQ msg ID is always unique.
Regards,
Giuseppe

Sending duplicate text messages

My phone is sending duplicate text messages whenever I send to my contacts. How do I stop this?
I've noticed this on my RAZR Maxx and now my HTC One M8.

Mclindy,
Lets stop the maddness so your friends only get signal messages when you send them. I know you moved from the Maxx to the M8. Did this start right away with the M8 or did it take a little bit of time? Do you use the native Messaging app that came with the phone or one that was downloaded from the Play Store?
SarahO_VZW
Follow us on Twitter @VZWSupport

Help...is there a way to send an entire text mesage thread to my email? My phone is sending duplicate texts and everything I am reading says to delete message threads. I have an IPhone 4. thanks

Help...is there a way to send an entire text mesage thread to my email? My phone is sending duplicate texts and everything I am reading says to delete message threads. I have an IPhone 4. thanks

You can try an app like PhoneView (Mac) or TouchCopy (Mac or PC). Both will allow you to archive text messages to your computer.

TS3276 Mail has started sending duplicates of a message, especially group messages. It also opens 2 windows for writing a new email. Help.

Mail has started sending duplicates of a message, especially group messages. It also opens 2 windows for writing a new email. Help. How do I fix this?

Unfortunately there isn't official commercial support for Mozilla Thunderbird from Mozilla Corp.. I believe some contributors here ([http://mozilla.magicfab.ca myself included]) do offer such support, though.
''Before doing anything else, please do exit Thunderbird completely and [https://support.mozilla.org/en-US/kb/profiles-tb#w_backing-up-a-profile backup the profile folder] - it contains all your email, settings, filters, etc.''
Regarding your issue, it looks like the mail folder information may be corrupt. In the left pane, in the folder list, right-click on the Sent folder and select '''Properties'''. Choose "'''Rebuild Index'''" or "'''Repair Folder'''" - do you even have that option? Once done, exit TB completely and restart it.
Updating to a newer version will help anyone help you, if only because some of the documentation for older Thunderbird versions is a bit harder to find and testing to try & reproduce your problem will be harder. Don't do this just yet, though :)
After this issue has been addressed I would suggest considering using IMAP if your provider allows you to, and of course archiving your email to Local Folders and doing regular backups of your profile.
If you want to arrange commercial support, contact me via the link I provided above and we can discuss rapidly. Otherwise I am fine continuing here, however I can only reply as time permits. I am in Montreal (so, EST time zone).

How can I prevent Mail from applying actions (moving/copying/flagging/marking read) to duplicate messages?

I use Mail to check multiple accounts. When I receive the same e-mail in multiple accounts, actions applied to an e-mail in one account often (though not always) affect duplicate messages in other accounts.
Example 1
Someone sends an e-mail to both me and my wife. Mail is set up to check both accounts. If I open the message in my Inbox, it marks it as read in my Inbox as well as in my wife's Inbox.
Example 2
For historical reasons, I have chosen to have all my e-mail forwarded (by the server) to a second account, to be used essentially as an un-touched archive of all incoming mail. If I manually move a message from my main account Inbox to another mailbox, the destination mailbox will end up with 2 copies, one from my main account Inbox and the other from the "un-touched archive" Inbox (which has obviously now been altered unintentionally).
Does anyone know of a way to prevent this behavior. I can manage my own duplicates. I don't want Mail to do it for me.
(Btw, I already have the "AlwaysShowDuplicates" option set using "defaults delete com.apple.mail AlwaysShowDuplicates")

There are certainly many ways of organizing things so that Mail never has to deal with multiple accounts and duplicate messages (separate user accounts, separate computers, separate mail clients, etc., etc). That's just not what I was asking. I'd like to know how to fix Mail's behavior when it does have to deal with multiple accounts and duplicate messages.
I was hoping there might be another hidden preference or something (and by the way my original post should have said "defaults write com.apple.mail AlwaysShowDuplicates -bool true", instead of the "defaults delete ...")

Duplicate Message ID issue in case of Multi mapping (without BPM)

Hi Experts,
I am doing one sample Example for my requirement of converting the single source message data into the multiple Target messages.
for example, when sender system is sending the 5 sale order details into a single message in PI then my Inbound proxy class of ECC R/3 receiver system must get this sale orders separately, that means inbound proxy class method must be triggered separately for 5 sale orders from sender system. for achieving this, I have used the Multi mapping concept in ESR (without BPM).
This scenario is in Asynchronous mode.
The below screen shots give the details on what I have configures so far.
IN ESR
IN ID
IN SXMB_MONI of PI
IN SXMB_MONI of ECC R/3 Receiver system (Error in Processing)
due to this error, inbound Proxy class method is not being triggered for the single Sale order details as well,
please let me know how to tackle this duplicate message ID issue when we have multiple payloads to process in a single message.
please also let me know if is there any other workaround to fulfil this requirement.
Thank you,
Regards,
Jagesh

Hi Nunu,
Check the below blog for restrictions.
Multi-Mapping without BPM - Yes, it’s possible!
Restrictions
Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not part of the AE.
Regards,
Praveen.

Standalone (J2SE) adapter - axis SOAP adapter - issue duplicate messages

All,
Perhaps you can help me. I've setup a scenario where an standalone (J2SE) adapter sends a file to SAP XI channel, configured on the central adapter engine, of type SOAP configured to use Axis servlet.
The connection is setup and the standalone adapter channel logs thre response from the SOAP channel which reads HTTP error 500, indicating a duplicate message.
SAP has identified this problem and proposes in the FAQ for Axis (note 1039369) to set on the SOAP channel module CallSapAdapter property ignoreDuplicate to true in the module processor.
I've implemented this as suggested however found the problem persists. I'm still receiving an HTTP 500 error.
Your help is much appreciated solving this problem.
Thanks
Harald

As there was a bugfix recently, make sure that you have installed the latest patch.
If this does not work, open an OSS ticket for this issue.
Stefan

Duplicate message and Duplicate key error in Moni and RWB

Hi,
I am getting very frequent issues of Duplicate messages in production system moni and RWB.
Moni error: (IDOC to JMS) Errors are coming in call adapter step:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not insert message 005056aa-730e-1ed4-a6c9-a01ee2b86cb3(INBOUND) into duplicate check table. Reason: com.sap.sql.exception.OpenSQLException: Connection reset by peer: socket write error OpenSQLExceptionCategories: [RECOVERABLE]
RWB error: (File toIdoc) Errors are coming in sender channel.
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.DuplicateMessageException: Message Id a6d559cf-b00c-11e4-b786-00000daf354a(OUTBOUND) already exists in duplicate check table: com.sap.sql.exception.OpenSQLIntegrityConstraintViolationException: Violation of PRIMARY KEY constraint 'PK__BC_MSG_D__99C1915D3DE9247A'. Cannot insert duplicate key in object 'SAPPGXDB.BC_MSG_DUP_CHECK'. The duplicate key value is (a6d559cf-b00c-11e4-b786-00000daf354a, OUTBOUND). OpenSQLExceptionCategories: [NON_TRANSIENT, INTEGRITY_CONSTRAINT_VIOLATION
Moni errors are manually reprocessed and RWB are automatic.
Can you please let me know if there is any solution available for these issues?
Thanks
Navneet.

I'm getting the same issue at my current client:-
Putting message into send queue failed, due to: com.sap.engine.interfaces.messaging.api.exception.DuplicateMessageException: Message Id e1d4a31b-f0cc-11e4-c7fb-0000029706f7(OUTBOUND) already exists in duplicate check table: com.sap.sql.exception.OpenSQLIntegrityConstraintViolationException: ORA-00001: unique constraint (SAPSR3DB.SYS_C00188646) violated OpenSQLExceptionCategories: [NON_TRANSIENT, INTEGRITY_CONSTRAINT_VIOLATION]
I've tried restarting the SOAP channel but this has not resolved the problem.
Just read on another thread that this may be a misleading error message (see last post on the link). It may be an idea to increase the trace level temporarily and look for any other issues that may be the cause.
So far I've not seen any post that describes the error on the SOAP channel - only seeing it for JDBC & File. However it seems to be a common problem across a number of sender channels.

CFMAIL sending duplicate messages

Similar Messages

Maybe you are looking for