CFolders for Solution Documentation

Hello There,
I have a requirement which says workflow needs to be activated for the Functional Documentation that are uploaded in the Solution Manager SOLAR01 & SOLAR02. We have decided to use cFolders for enabling the Email Functions, Status Update and so on. Can any one help me to find the Configuration and Implementation guide on how it can be done in Solution Manager.
Thanks for your help in Advance...
Regards,
Vaidya.

When the user uploads the document in a Draft status then a WF needs to be triggered and should be passed on to the next level of approval thru its completion.
Thanks,
Vaidya

Similar Messages

Documentation for Solution Manager 4

Hi all!
Iam going crasy..
At the moment I am just customizing the solution manager 4. In the reference guide section create background jobs they refer to the configuration guide of the solution manager 4. 0 to get a complete list of background jobs for the solution manager 4.0.
Ive downloaded the configuration guide for solution manager 4.0 but there is no information about this. I know the place of documentation on the sap market \solutionmanager.
Did anybody know something more?
Thank you for help!
Best regards
Thomas

Hello Thomas,
Please in spro go to Basic Settings->SAP Solution Manager System->Schedule Background Jobs
The information of this point is more than enough to configure these jobs.
In a previous Configuration Guide you can see:
Periodic Jobs
Periodic Job scenario
REFRESH MESSAGE STATUS used to collect responses from SAP for messages
and Issues sent from the SAP Solution Manager
SOLMAN_ISSUE_STATUS_REFRESH Service Desk
SM:SCHEDULER Solution Monitoring
BTC_CMS_COLLECTOR Change Manager
LANDSCAPE_FETCH Implementation and distribution
CRM_ISSUE_REFRESH Implementation and distribution (testing)
Best regards,
Dolores

DMS and cFolders for requirements management

Hello SAP Gurus
Iam suggesting SAP DMS and cFolders for requirements management for an Automobile OEM client.
The requirements documents consist of software, hardware, mechanical etc...
Did any of you implement these modules for a similar scenario?
I want to know the expert feedback in this scenario.
Regards
Prasad K

Hi Prasad,
Given the way i understand 'Requirements Management', it's a holistic approach which includes identification, documentation, analysis, prioritization and agreement on requirements and then controlling the changes and communicating it to relevant internal and external stakeholders.
This is an ongoing process throughout a project.
In this perspective, DMS(for handling documentation),c-folders(collaboration,communication wrt ERP objects like docs,BoM et-al),c-projects(colloborative pjt mgmt) and ECM(managing changes) would be an ideal proposition to handle requirements management in Automitive sector effectively. You may explore other solutions for a finer degree of control.
Regards,
Pradeepkumar H.

Change Request Managment setup for Solution Manager 4.0

Hi guys! Can someone help me on how to setup the Change Request Management in Solution Manager 4.0? I have already have checked the SAP Marketplace for any documentation about this topic but found none. I am configuring the two test servers (1 prod and 1 dev) in tcode SMSY. I have also configured the system role for each server. When I try executing /TMWFLOW/CMSCONF in SE38, no clients appear in the CRITICAL OBJECTS pane. Did I miss a required step in the implementation? I hope you guys can help me. Thanks in advance...
Regards,
Ronald Navarro

Hello Ronald,
Following the spro configuration will setup the Change Request Management scenario, each spro point has associated the corresponding documentation.
Also in service.sap.com/rkt-solman>solman 4.0>CCC profile you will find valuable information about how to use this scenario.
Hope this helps,
Dolores

Wily Introscope Version for Solution Manager 7 SPS 17

Hi
We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
Looking in the SWDC there are downloads in SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
Thanks for any help.
Paul.

Hi Bhudev
Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
the first 2 (of 23) setups are failing :
SSO The value of profile parameter login/accept_sso2_ticket could not be checked
BI Cannot invoke CCMSBISETUP on host localhost
Warning :
User(BI) Role SAP_BI_E2E does not exist
Then it says :
To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
I cannot find this Diagnostics Setup Guide for SP17 ?
The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
Thanks,
Paul.

Excluding some objects Solution Documentation Assistant Analysis

Is there a way to exclude certain objects ( transaction codes/programs etc .. for example SE* ) while running an Analysis in SolDocA ? We have numerous Informatica generated objects that need to go into this exclusion list. The intention is that these objects wont appear in the Analysis report. The names of these objects are like ZDW####.
Any help is appreciated.

Hi Rony,
The Solution Documentation Assistant(SDA) Analysis is based on an Analysis Project which has been created e.g. from a Solution Manager project. Assuming that your transactions etc. for which you won't perform an Analysis for are assigned only to certain business processes or scenarios, you might exclude these structures and sub-structures during the creation of an Analysis Project. With regards to the report you can exclude such objects for the structure results as described above. As the report contains also objects from the Analysis Summary, you would need to remove the whole section or the few tables or the entries you don't want to have in manually from a copy of the report. In case you want to have a list without such objects from a summary table you might use filter functions before doing the export of the table.
Best regards,
Andreas

Solution Documentation Assistant: RBPD

RBPD (Reverse Business Process Documentation) - Is this possibly only with Solman 7.1 or can this be performed using Solman 7.0 as well?
Does anyone have a "How-to" on this function using Solution Documentation Assistant?
Any inputs, documentation, materials, etc. is highly appreciated.
Thank you

I have repeatedly been told that using Solman 7.0 a BPH (with tcodes and img objects mapped) can be created using workload data from EWA. Is this true?
Yes, plz see my response below
Now assume that there is no Template/Implementation project in the Solman 7.0 system that contains any business process structure. Is this possible?
Here is path for how to go about it:
Even if you do not have an implementation/template project you have some documentation that contains information about what was done to test the implementation? Something like a test script i.e. an Integration Test Script.
Just create some mock project and select the most revelant business scenario from the Business Process Repository (a.k.a BPR - The preconfigured out of the box scenario list that SAP delivers with SolMan) that you want to reverse engineer, for example Order to Cash process. Now you must have some scripts with you, that will act as the path to show u what transactions you run in your business process like VA01 , VA02 etc...
As a next step, Now use the BPR and the test script as a starting point to define your project. and then run the SoDoCa to do its analysis for the same project and there will be an option to update your SolMan project within the SoDoCa workcenter. The work is iterative and will require the O2C configurator's assistance at one point, even though you have a test script with you.
Since you use the BPR hte configuration comes out of the box, which explains how SAP attempts to let you reverse engineer.
There will be possible gaps and it will require continuous review eventually, which is part of keeping up the Business process documentation current.
If so, can you direct me to specific documentation? I couldn't find this in the solman-rkt link for 7.0.
I believe the RKT documentation does not have this information and in the ramp up process we were told about this being available in 7.1 with more added functionality.

Help! My iPad's screen is black and unresponsive, but when I plug it in I can hear it make the noise it normally would. I'm unsure what to do and I've been looking all over the internet for solutions and so far none are working.

As I mentioned, the screen is black and unresponsive. However when ever I plug it into either my charger or my lap top it will make the expected sounds, it also [when plugged into my computer] opens up iTunes how ever the device can't be seen on the side bar. So far to resolve the issue I've tried.
- Attempting to turn it on
- A reset using the home/sleep button and the power button
- Plugging it into my computer to see if I can get it working through iTunes [Which so far is fruitless]
- Holding 3 fingers down in the screen in case my screen curtain was enabled [Nothing happened with that either]
- Putting it face down over my knee and slapping the back in case a cable was lose [Done this repeatedly and nothing happened]
I don't know what's wrong with it and I've been searching for solutions for about 2-3 hour's now. I'm hoping someone here might be able to help me as I would like to go through as many options as possible before trying to take it into the apple store.
[Side note I had also just updated my iPad two nights before the problems began to occur to the iOS 8 technology.My version of iPad is the iPad 2 with 16GB of memory. I'm not sure how much information will be relevant but I'll give as much as possible is someone is able to help me.]

Apple does not replace screens and your iPad is clearly out of warranty, not that accidental damage would be covered anyway. If you want to try to have your iPad fixed, there are 3rd party repair centers you can try. In your google search bar type the following:
"ipad repair "xxxxx"
Put your city in the "xxxx" for example, "tampa, fl"
There will likely be some options you could investigate.
Or, you could sell your iPad, even damaged to Gazelle.com and get yourself a shiny new iPad. And if you do, make sure you add AppleCare+ for $99. This not only increases your Apple technical support for two full years, but would get you up to two iPad replacements at $49 each.

What are installations material for Solution Manager 7.0 EHP 1

hi friends,
we plan to do installing Solution Manager 7.0 ehp1,
can any help me to get the path for installation media for Solution Manager 7.0 EHP 1 in service market place.
thanks..

https://service.sap.com/swdc
-> SAP Installations and Upgrades
-> Installations and Upgrades - Entry by Application Group
-> SAP Technology Components
-> SAP SOLUTION MANAGER
-> SAP SOLUTION MANAGER 7.0 EHP 1
-> Installation and Upgrade
Also check https://service.sap.com/instguides for the install guide and SAP Note 1276022 - SAP Solution Manager 7.0 EHP1
Installation.
Nelis

ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS

Dear all,
Hi,
I am configuring solution manager 7.0.
In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
program WEBADMIN not registerred.
can any one tell me how to register this program in sap gateway.
best regards
azeem

Hi Azeem,
Just before creating the rfc connection do this step.
Set-Up Solution Manager Connection to Solution Manager Diagn
Use
Check the connection to function Solution Manager Diagnostics.
Default Settings
The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
Activities
If the default values are correct, save the settings.
To run the Solution Manager Diagnostics in another system, enter the required data and save.
Also check that your java is active.
Regards
Ashok

I have iphone 3gs, while connecting, it shows sync in progress, then in my pc shows backing up step 1,2,..5, then message comes itunes stopped working-windows checking for solution. Then another message comes that "A problem caused the program to stop wor

When i connect my iphone 3GS to my PC, while syncing in progress, pc shows backing up, preparing to sync. Then message display "itunes stopped working",
windows checking for solution, Then message comes "A problem caused the program to stop working correct. Windows will close the program and notify you if solution is available" , Then Itunes go off. I have tried agains installing Itunes etc no use. I am not a computer literate, help me to resolve this, Thanks

I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Itunes stops working when i connect my ipad windows error message comes up looking for solution but then closes itunes.

Can anyone help my itunes stops working when i connect my ipad to my computer a windows error message comes up looking for solution but then closes itunes.

Hi tokley13,
To troubleshoot this issue where iTunes is quitting unexpectedly, please follow the steps in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash, if possible.
Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ 2>&- | wc -l | pbcopy
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
The Terminal window doesn't show the output. Please don't copy anything from there.

How to start with framemaker 11 for online documentation

How to start with Adobe Framemaker 11 for online documentation?

Hi,
Try googeling and search for adobe actionscript code and tutorial e.g.:
http://fmsguru.com/tutorials.cfm
http://www.flashcomguru.com/tutorials/
http://www.adobe.com/devnet/flashmediaserver/
Good luck,
Alon

When i got my new iphone 4, its in recovery mode. while restroing with itunes, im getting error at restoring firmware stage? what could be the reason? pls help me for solution.

when i got my new iphone 4, its in recovery mode. while restroing with itunes, im getting error at restoring firmware stage? what could be the reason? pls help me for solution.

You got a new iPhone 4, and out of the box the phone is in recovery mode? If that's the case, return it.
If you don't want to do that. what error code are you getting?

CFolders for Solution Documentation

Similar Messages

Maybe you are looking for