CFolders System for Business Package Buyers

I am very new in KM and cFolders area.
Currently we have already installed EP+EPC on Netweaver04s and trying to apply
business package Buyers.
The installation guide of Business package said that we need to have SM59 RFC
connection to cFolder system.
Anyway, as I have little knowledge about cFolder system. I don't know how
I can navigate to that and do the initial testing.
Kindly advise.

Dear G,
As I see your back-end system has 2 app servers... to cofigure the portal iViews to use both app servers you need to define that in the portal system object that is defined to connect to the backend system... You should look if the system object you use for connecting to srm is of the type: "SAP_R3_LoadBalancing"
See also: http://help.sap.com/saphelp_nw70/helpdata/EN/1f/bddf3d48b05d5ae10000000a11405a/frameset.htm
In addition because you are talking about ITS you could configure a WebDispatcher in front of your Backend SRM system...
Good Luck,
Benjamin Houttuin

Similar Messages

Multiple backend systems for business package ESS/MSS

Hi,
I would like to know whether there is a smart solution for connecting the business package ESS/MSS with multiple backend systems (up to 10 systems).
I am aware of the possibility using parameter "sap-wd-arfc-useSys", but this implies, that content needs to be duplicated n-times in order to be able to maintain the Jco destination suffix.
Any hint, also for custom built solutions are very welcome!
Best regards,
Johannes

Johannes
There is some problem with the link
See this.
Connecting multiple SAP Systems
Thread name is 'Connecting multiple SAP Systems'
Krishna Murthy

Implementation/config guide for "Business package for Product"

Hi,
I need implementation/config guide for "Business package for Product".
If anybody has it please send it to [email protected]
Thanks
Vinit

Did u get the same ?
If u have it can u send it to [email protected]
thanks

New portal forum for business packages?

I think it might be useful to have a separate forum under the portals area for business packages. There is often confusion if a question is related to portal content or portal implementation and a separate forum would help this.
Cheers

Hi Marilyn and Uri
Potential forum name: Pre-packaged portal business content
Forum description: This forum is for discussing the installation and configuration of business packages mentioned in the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio">Portal Content Portfolio</a>. Topics might include licensing, portal version compatability, and back-end configuration.
Reason for separate forum: A lot of the business packages have a backend component or extra development requirements which goes beyond straight portal details. For example, the XSS (old ESS and MSS) make use of Web Dynpro for Java and some backend ERP or R/3 configuration.
The portal content development forum would still be aimed at those using the PDK and the portal implementation forum would be more about user management and PCD.
Cheers

Source Code for Business Package for Products

Hi,
I need to the source code and customization steps for Business Package for Products.
Please let me know how and where can i get this.
Thanks in Advance
Prashil

Augustine Vinish wrote:
Hi Team ,
I have find out the source code of the Package from dba_source at text column .
How can I find out
*1 .where the Database is mounted ie Server information and*
*2 .Name of the Sql file contains the package body*
*3 .location of the file in the Server*
Regards ,
AugustineHi - the source code isn't read in from a file by the database, it's actually stored in the database itself (have a look at the user_source view). Now you may have text files backups of your source code, that have been used previously to create the packages, but the database won't store any info about the file used to do this.

Load balancing for Business Package iviews

Hello Gurus,
we have installed SRM Business packages on our Portal system and accessing the SRM which has 2 application servers.How can we make the iviews to access any one of the application server as the link to ITS in iviews is static.What is the easiest and best approach to get them load balanced using Business Package iviews.
Regards!

Dear G,
As I see your back-end system has 2 app servers... to cofigure the portal iViews to use both app servers you need to define that in the portal system object that is defined to connect to the backend system... You should look if the system object you use for connecting to srm is of the type: "SAP_R3_LoadBalancing"
See also: http://help.sap.com/saphelp_nw70/helpdata/EN/1f/bddf3d48b05d5ae10000000a11405a/frameset.htm
In addition because you are talking about ITS you could configure a WebDispatcher in front of your Backend SRM system...
Good Luck,
Benjamin Houttuin

ALE logical systems for business service or process

Hi,
I am trying to send an IDOC into my R/3 system. It is the same IDOC type that I have sucessfully sent out to parties. All the config is in place for communicating with the system, because I have sent others IDOCs in the past. However, they always were sent from another R/3 business system. They processed sucessfully.
I am now trying to sending IDOC's from a BPM,as well as, from a business service. They are under the "With Party" section of the directory. These obviously do not have logical systems, so when I try to send the IDOC I get
"Unable to convert the sender service Purchase_Orders to an ALE logical system", where purchase_Orders being the name of the business serice.
How can I handle this problem?
Should I hard code values somewhere?
Which ones?
I have read the other posts for the error above, but my situation seems to be different.
Help!
Chris

Hi,
To solve your problem, here my solution:
1/ In your Business Process of your ID (configurator), go to menu "Service > Adapter-specific identifier" and in the part "IDoc Adapter", write your Logical System.
2/ Create this Logical System on your target system (R/3).
WARNING: XI allows you to used a Logical System for only one service (Business Process). Thus, if you are several interfaces, you must used different Logical Systems.
Mickael.

Source Code for Business Package Assets

If anyone customized I would like to know how to get to the Java source code for Asset Business Package
Regards
Mike

Augustine Vinish wrote:
Hi Team ,
I have find out the source code of the Package from dba_source at text column .
How can I find out
*1 .where the Database is mounted ie Server information and*
*2 .Name of the Sql file contains the package body*
*3 .location of the file in the Server*
Regards ,
AugustineHi - the source code isn't read in from a file by the database, it's actually stored in the database itself (have a look at the user_source view). Now you may have text files backups of your source code, that have been used previously to create the packages, but the database won't store any info about the file used to do this.

Licence required for Business Package download ?

Hi,
I like to download the "Business Package for Employee Self-Service (mySAP ERP 2004)" for the integration to the SAP Enterprise Portal.
I found it here: https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio
But instead of a download link I can only see that a licence is required for the download.
I think that my company already has (or will buy) the licence.
But what steps are now needed to activate the licence for my SDN account?
Or whatelse must be done by my company to download the business package?
Thanks for your help.
Regards,
Thomas

Hi Thomas,
in case you are sure that you hold the required license, please check the following:
- you need to be signed with your S-User ID (the ID to Service Marketplace) at SDN
- additionally, you need to maintain User Mapping for this ID for the data source 'Service Marketplace' in 'My Profile'
If you still do not see a download icon, please check with your SAP account manager if you hold the required license.
If there are other technical problems, you may also contact [email protected]
Kind Regards, Anke

Cook book for business package:compensation specialist and HR connectivity

Hi all,
Have any of you configured Business packages compensation specialist and Hr connectivity, do you any cook books or Documents about how to configure it.
If so please send it to my ID:[email protected]
Helpful docs will be much appreciated.
thanks in advance.
Regards,
Vivek

>
Siddharth Rajora wrote:
> Yes these are the only versions available, no changes have been done
> so you can use it for ehp4
>
> 'BP Compensation Specialist 60.2'
>
>
> there was no plans to release a new version of Business
> Package for Compensation Specialist for ERP 6.0 (ECC 600)
>
> PA-EC is the successor product in ECC 600 and as you have
> seen this BSP works from PA-EC menu (or as a standalone URL)
>
> MSS ECM is the corresponding delivered
> functionality from the Portal side but provides
> specifically manager/employee ECM related actvities and as you have seen
> may not include exactly the same functionality as BP Comp Specialist
> - this is because product area PA-EC has
> original ownership of this BSP, we at EP-PCT-MGR-HR support
> provide support primarily for problems encountered using
> Business Package (BP) for Manager Self Services (MSS) and the
> ECM workset delivered with this BP
>
> you can refer for more information here
>
> http://wiki.sdn.sap.com/wiki/display/ERPHCM/Initialstepsin+MSS
HIi Siddharth, thx for confirming, this was my guess.
It also appears that much of the new ECM analytics integrated with BW in EP5 is being moved under the TMS 1.51 (Talent Management Specialist) Application.
If they are moving ECM reports there, I don't understand why you would not just incorporate all the BSP links / folder structures so that 'BP Compensation Specialist 60.2' could be officially retired.

Info. required for Business Package for GL accounts.

Hi,
Please let me know business package for
1.General ledger creation
2.General ledger changing
I need this package for Adobe interactive forms for web dynpro Java for Portal.Kindly let me know also scenario names as well.
Thank you,
Laxmikant

Laxmikant,
check this link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/b4/af2ece0cf94427956546a15da8f303/frameset.htm
Thanks
Bala Duvvuri

Supported Operating Systems for Business Objects Enterprise

I am unable to locate information on the supported operating systems platforms for Business Objects Enterprise version (11.0.0.1775) build (1775) within the BO support documentation.
I want to know if this version of BO is supported on AIX (xlC.aix50.rte version 8)?

Not sure which exact version is 11.0.0.1775, but it's definitively BO XI release 1, so I guess this document is your best guide:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a03454bd-a03e-2b10-98b7-fc11486d87bf
And it mentions AIX 5.1 as a minimum so you may be out of luck...

Portal version required for Business packages deployment

Hello All
I have to deploy the following business packages in Portal
Business Package for Recruiting Administrator 1.41
Business Package for Recruiter 1.41
Business Package for Employee Self-Service (SAP ERP) 1.41
Business Package for Manager Self-Service (BP ERP05 MSS 1.41)
Business Package for Talent Development Specialist 1.01
Business Package for Talent Management Specialist 1.40
Can you please help me find out the portal verison required for them
We are on currently EP 7.0 SP12
Rohit

Hi,
Check SAP Hinweis 1129139 - SAP ERP Enhan. Pk.1 SPS 05(03/2008) Release Information Note
Please check below extract from this note:
Software Components SP Level
SAP ECC Server VPack
ECC-VPACK 601 SP05
ERP VALUE PACK HR 601 SP05
SAP FinServ Claims Mgmt VPack
IS-FS-CM 601 SP05
Portal Content
BP ERP05 CLAIM CENTER AGT 1.01 SP05
BP ERP05 CLAIM HANDLER 1.01 SP05
BP ERP05 EXPENDITURE CERT 1.01 SP05
BP ERP05 TALENT DEV 1.01 SP05
BP ERP05 HR ADMINISTRATOR 1.11 SP05
BP ERP05 COMMON PARTS 1.11 SP05
XI Content
XI CONTENT STORE CONNECT.1.0 SP01
XI CONTENT ECC-VPACK 601 SP05
XI CONTENT GS1 1.0 SP01
XI CONTENT UN/CEFACT 1.0 SP01
XI CONTENT PROMERLAYINTEG 6.7 SP01
XI CONTENT DEMAND MGMT 1.0 SP01
Thanks
Sunny

Logical system for business service!!!!!!!!!

Hi all,
I send a file from filesystem to XI which inturn converted to IDOC and posted to SAP system. Filesystem i've added as a business system(which has a logical system in R/3).
now i've added the filesystem as a business service(assinged to a party). So if send the file i'm getting the error as "Unable to convert sender service to an ALE logical system".
How can i resolve this problem?
can we assign the business service a logical system name ?(as business system)
What could be the procedure for processing this kind of b2b scenario where we dont have information about systems or sevices in SLD?
Thanks in advance for your replies........
Santhosh.

Hi just check this Bolg for Help
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Ques.3
Or refer to this link
<b>/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
if u want to learn more bout
How to configure Idoc adapters
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
reward if helpful
Regards
Sachin Dhingra
Message was edited by: Sachin Dhingra

Supported operating systems for Business One

Hello,
I was under the impression that Business One was a solution for smaller organizations and only was officially supported for the msft operating system.
Can someone clarify/confirm if this is correct?
There is a pdf on this SDN site that seems to indicate that Business One also is supported for 64bit Linux: SAP Business One Application General [original link is broken]
Thanks.
Mike

If you read the article carefully, it clearly mentioned It is not official SAP document. Secondly, it is only talking about B1 2004 version. That is very old version as now 2005 would be soon out of mainstream support.
You first assumption is correct. Only MS Windows is supported OS and B1 is designed for SME.
Thanks,
Gordon

CFolders System for Business Package Buyers

Similar Messages

Maybe you are looking for