CFP2100 not on newwork after reboot

Hello
I am working with a cFP2100. I have
connected to it via a VPN and everything was working fine. I
created a .rtexe file with the application builder and deployed it as
"Set as startup". I enabled the webserver and the web error log
and used MAX to reboot the unit. After the reboot its gone.
I get time out errors if I try to ping it. I cannot find it on
the network or ping it and it is in Detroit while I am in California so
I can't cycle the power. I have seen it do this before but can
only recall cycling the power to remedy it. Does anyone know if
there is a way I can get it to come back without cyclingthe power?
Thanks
Scott

It looks like I have everything working now except one aspect of the
remote panel. I can access a remote panel but I don't think it is
properly targeted for the vi that is part of the rtexe file. The
page comes up but it looks like the vi is not running. The page
never updates, there is an elapsed time counter that stays at 0 and the
controls at the top of the panel (arrows, stop sign) stay grayed
out. The html code of the page is shown below . I think the
issue lies in the "LVFPPVINAME"
variable. You can see what is written but the vi is built into
the rtexe file located in the startup folder. Is there some other
step I need to do to make sure the remote panel is targeted to the
rtexe file?
Thanks
Scott
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Draft//EN">
<HTML>
<HEAD>
<TITLE>Kool APU Monitor Page</TITLE>
</HEAD>
<BODY >
<H1>Kool APU Monitor Page</H1>
<P>
<TABLE BORDER = 1 BORDERCOLOR = #000000><TR><TD>
<OBJECT ID="LabVIEWControl" CLASSID="CLSID:A40B0AD4-B50E-4E58-8A1D-8544233807AE" WIDTH=1018 HEIGHT=735 CODEBASE="ftp://ftp.ni.com/support/labview/runtime/windows/8.2/LVRunTimeEng.exe">
<PARAM name="LVFPPVINAME" value="Kool_APU.lvproj/Kool/Kool_APU.vi">
<PARAM name="REQCTRL" value=true>
<EMBED SRC=".LV_FrontPanelProtocol.rpvi82" LVFPPVINAME="Kool_APU.lvproj/Kool/Kool_APU.vi" REQCTRL=true TYPE="application/x-labviewrpvi82" WIDTH=1018 HEIGHT=735 PLUGINSPAGE="http://digital.ni.com/express.nsf/express?openagent&code=exck2m&"></EMBED>
</OBJECT>
</TD></TR></TABLE>
<P>
</BODY>
</HTML>

Similar Messages

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

Listener service not start automatically after reboot in Win2K server Clust

Hi all,
I set up a two node Server Cluster with Microsoft Windows 2000 server cluster service. Hardware are two HP DL380 servers and HP MSA500 (the shared storage). The cluster's IP address is 10.1.241.65. When I shut down both servers and restart the primary server, the listener server service will not start automatically. The listener log is:
Started with pid=1108
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.241.65)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
The service is set up automatically start. I suspect the cluster virtual IP is not available immediately after reboot. So I tried setting the Recovery after first failure and second failure to 3 minitues each, and setting up Dependencies of the listener on the cluster service in the Win2K Service panel. Neither worked.
The service can be manually start.
Any suggestion?
Frank.

The command to start automatically the listener is :
lsnrctl start
check the parameters in : <ORACLE_HOME>/network/admin/listener.ora
check the IP address or host name
Joel Pérez

SF300-24 is not saving configuration after reboot

Dear All,
I have a couple of SF300-24 switches. When I made needed configurations using CLI or GUI and then saved all configurations. The problem is that switches do not save configurations after reboot. Please assist.
Thank you in advance

Hi Vsevolod,
I guess you have performed the function to copy the running configuration to the startup configuration as per the screen capture below.
The current released version of code does not have a supported CLI only a menu accessable via console, SSH or telnet. New code coming out this month supports a CLI, so I am surprised by your comments regarding CLI.
If you have a early beta release of software version 1.1 with CLI, I would suggest you call into the Small Business Support Center to get the problem looked at.
I am using the beta code on my ten port SG300 and 48 port SF300 , but had no difficulty saving configurations in old or beta versions of firmware.
If you are still having trouble after reading this post, please contact the SBSC at ;
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
regards Dave

CSS Service not coming up after reboot

I installed oracle 10.2.0.2 (X86_64) on SLES 9 (x86_64) NON_RAC (single instance with ASM) and the CSS service is not coming up after reboot. If i do localconif reset then it starts up but fail after every reboot. Here is the data to debug:
This is the tail of my $ORACLE_HOME/log/servername/alertservername.log
2008-03-06 22:16:32.587
[client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
2008-03-06 22:16:32.588
[client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
2008-03-06 22:16:33.217
[client(13472)]CRS-1001:The OCR was formatted using version 2.
2008-03-06 22:17:54.615
[cssd(13670)]CRS-1601:CSSD Reconfiguration complete. Active nodes are pune-srv-eps-02 .
u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is accessible through oracle user:
$ls -l /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
-rw-r--r-- 1 epsora epsdba 364544 2008-03-06 22:16 /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
This is the log file mentioned in above file:
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
e. All rights reserved.
2008-03-06 22:16:32.579: [ OCROSD][2546869600]utread:3: problem reading buffer
5db000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.580: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]proprinit:problem reading the boo
tblock or superbloc 22
2008-03-06 22:16:32.588: [ default][2546869600]a_init:7!: Backend init unsuccess
ful : [22]
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]proprinit:problem reading the boo
tblock or superbloc 22
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.676: [ OCRRAW][2546869600]propriowv: Vote information on di
sk 0 [u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr] is adjusted from
[0/0] to [2/2]
2008-03-06 22:16:33.217: [ OCRRAW][2546869600]propriniconfig:No 92 configuratio
n
2008-03-06 22:16:33.217: [ OCRAPI][2546869600]a_init:6a: Backend init successfu
l
This is tail of my ocssd.log
[    CSSD]2008-03-06 22:17:55.955 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a1b10) proc(0x7a4e70) pid(13754) proto(10:2:1:1)
[    CSSD]2008-03-06 22:17:56.455 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a3740) proc(0x7a4e70) pid(13773) proto(10:2:1:1)
[    CSSD]2008-03-06 22:17:56.460 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a5b10) proc(0x7a7f50) pid(13772) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:08.380 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:08.383 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:11.556 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7aa3c0) proc(0x7ac7d0) pid(13845) proto(10:2:1:1)
[    CSSD]2008-03-06 22:18:17.873 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7ad070) proc(0x7af480) pid(13828) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:22.700 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9850) proc(0x7a1e50) pid(14060) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:22.703 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a22b0) proc(0x7a9850) pid(14060) proto(10:2:1:1)
[    CSSD]2008-03-06 22:44:25.875 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a32b0) proc(0x7a1800) pid(14077) proto(10:2:1:1)
And this is my css.log
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
e. All rights reserved.
2008-03-06 22:17:47.404: [ CSSCLNT][2549892096]clsssInitNative: connect failed,
rc 9
I checked on metalink and found that this error can occur due to some old oracle references or changes in the uid of users but this is fresh install no oracle was there before and we didnt' change the OS user's uid also.
Please let me know what else to check or SR is the only option?
Thanks
Daljit Singh

Do you mean CRS rather than CSS?
I note that your database is patched to 10.2.0.2 but your CRS is still at 10.2.0.1. Bring both to 10.2.0.3 and if that doesn't resolve the issue open an SR at metalink.
Do not install the January CPU ... it appears to have issues with RAC that we are currently investigating.

My iPad is not charging even after rebooting and checking the charger on another device.

My iPad is not charging even after rebooting and checking the charger on another device.

So your charger works on another device just not on your ipad?
if so, make an appointment at your local apple store and have them check it out.

HT1414 my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped

SSRS 2008 R2 Services not restarting automatically after reboot

SSRS 2008 R2 Reporting instance not restarting automatically after patches install. Is there a way to resolve the issue
Windows 2008 R2 Server
16 GB RAM

Hi,
Follow this article to resolve the issue:
Reporting Services service doesn't start after the installation of MS12-070 security patch
http://blogs.msdn.com/b/mariae/archive/2012/11/12/reporting-services-service-doesn-t-start-after-the-installation-of-ms12-070-security-patch.aspx
Workaround 1:
Modify the registry to increase the default time-out value for the service control manager. To increase this value to 60 seconds, follow these steps:
1. Click Start, click Run, type regedit,and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control.
3. In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must créate it. To do this, follow these steps:
a.On the Edit menu, point to New, and then click DWORD Value.
b.Type ServicesPipeTimeout, and then press ENTER.
c.Right-click ServicesPipeTimeout, and then click Modify.
d.Click Decimal, type 60000, and then click OK.
This value represents the time in milliseconds before
Restart the computer for the changes to take effect. Check that SSRS services can be started now.
You cannot start SQL Server Reporting Services after you apply the update that is discussed in KB 2677070
http://support.microsoft.com/kb/2745448/en-us
Thanks.
Tracy Cai
TechNet Community Support

Oracle does not start automaticly after reboot

I've installed O 9i on win2ksrv after installing DB2.
Then I create a database and this db starts successfully.
After reboot the database is shutdown and can only starts manually by sysdba.

Hi,
Have you checked the space of ORAARCH or SAPARCH folder/directory ? The problem may be "Archive destination full". If its full then try to move some old Offline redo log file to other safe location as a backup and then try to restart the Oracle Instance again.
Regards
Bhavik G. Shroff

AirPlay button not appearing even after reboot

I recently updated my iPhone 3Gs 32GB to iOS 4.2.1 and found no AirPlay button. I read a thread about rebooting your iPhone once, but that didn't fix the problem either. Even after rebooting the device, I still can't see any AirPlay button. Any help?

I have the same probelm and even thought the botton on
any suggestions ?

G4 +23" CD Not keeping resolution after reboot

Heya folks I have a powerbook g4 and a cinema display 23".
I have been using the 2 of them together without problems, but I recently installed some of the apple service updates and after doing so I am having problems with with the external monitor.
In the past I was able to use a mirriored display and had full range of motion on the external monitor.
Now every time I boot up my external monitor screen gets compressed, and though both are set at 1280x800, the mouse goes side to side on the laptop display, but only about 3/4ths of the way on the external.
So now my mouse on the external display is out of snyc and when I click it, I have to click where it is on the laptop display, not the external.
I can fix this by going to the display setting control pannel and changing the resolution to any other size, then changing it back to 1280x800. Once I do this, everything works fine and the mouse can go from side to side in snyc with the laptop.
Unfortunately this only works until I reboot or shut down, every time I start over I have to do the same thing.
I have tried other resoultions on both the powerbook and the exernal monitor and have restarted with different settings on both both higher and lower resolutions, but I run into the same problem no matter what I do.
Any ideas on this? Very odd since it worked fine for months before these patches.
Chris

While I think the idea of following your steps to determine if the Sonnet is
overheating is a good one, your solution of leaving thee case open and running
a fan on the processor certainly is not. It is not only dangerous, but cooling systems in computers are designed to be closed systems, and leaving open the side will disrupt the cooling for every other part of the computer.
Also, notice in the original post that the system "is crashing more frequently" -
sounds like there was a problem before the Sonnet install. A fresh install sounds like it's needed in any case, and the investment in a new dvd drive for only $40 will be a worthwhile one even if the problem is the Sonnet card in the end. Drives that are 6 or 7 years old, even if they are working, are bound to be producing discs with more errors, and the firmware on a drive that old would recognize little of the current crop of blank discs. Even with an external burner, that machine needs a good internal burner because you can't boot externally. The original poster actually only needs to spend $20 on a cd only burner like this: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=20101000051036506652&name=CDBurner,
although a dvd burner would allow installation from a dvd.
Message was edited by: bicomputational
Message was edited by: bicomputational

ADFS 2.0 service does not automatically start after reboot

Hello,
We have two ADFS 2.0 servers in a farm. Any time these servers reboot, the ADFS service does not automatically start, even though the service is set to auto start. If I manually start the service it starts within 10 seconds.
The error in the logs show:
A timeout was reached (30000 milliseconds) while waiting for the AD FS 2.0 Windows Service service to connect.
The AD FS 2.0 Windows Service service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
But after the reboot is completed, I can manually start the service with no problems. Again, this ONLY happens on restart. I've searched the forums and found potential solutions for people who have consistent issues with starting ADFS every time.
Any ideas?

UPDATE - I built a 3rd ADFS server and was unable to reproduce the problem, until...
I went in to the service properties of ADFS and saw that even though I specified a Log On As account during the ADFS wizard, it changed itself back to "Network Service". I re-entered our ADFS service account username and password, it was
accepted, and I rebooted. On the next reboot, the service did not start automatically (with the same errors as the other ADFS servers), but I was able to manually start it.
I then went to the original ADFS server having the problem, switched it to use "Network Service", rebooted, and the service started up properly on reboot. I then changed it back to the named domain service account, and the issue came right
back. There are no other errors in the System Log indicating a problem with anything else.
So my guess is that something is happening to prevent the service from starting with the named Domain account on server reboot. But what?

Bookmarks get changed randomly / Bookmarks Bar does not stay showing after reboot

This is a brand new installation of FireFox 17.0.1 download directly from Mozilla. The previous installation was completely removed using Revo in an attempt to find the cause of this problem.
I have my bookmarks saved to a .json file so after full installation of FireFox, I rebooted the computer, came back into FireFox, enabled the Bookmarks Bar and imported my Bookmarks. Looks good so far. Then I shut it down and rebooted the computer. The bookmarks are gone, the FireFox size is back to default, and the Bookmarks bar is no longer showing.
In my previous installation, sometimes the bookmarks were there, sometimes they weren't. But even when they were, the actual URL that the bookmark was supposed to go to had been changed to some site that was opened at some point during the previous session (but not bookmarked).
The same types of problem do not occur in Opera, Safari, Chrome, or IE so I don't believe it is anything interfering with the saving of customizations.
Anyone have any ideas?

Bookmarks shouldn't have been changing by themselves. Your places database (which stores history and bookmarks together) might have been corrupted. Your new installation should not have that problem, at least not right out of the box.
Sometimes Windows permissions, files in use, or other factors can cause Firefox to lose changes or start up incorrectly. This article might help: [[How to fix preferences that won't save]].
Are you just running the standard release of Firefox directly on Windows? In other words, I assume:
* It's not the "Portable" edition of Firefox.
* You are not using sandboxing or virtualization software that isolates Firefox from the system.

Safari will not open, even after reboot

I have been having all sorts of problems with my iMac since installing Mavericks (Gmail integration was freezing everything, Maps just didn't work).
The latest is that Safari just will not open, period. I have rebooted several times and even reinstalled OS X via the Cmd+R on reboot, nothing. It hangs upon opening and needs a Force Quit. When restarting again, it asks if you want to reopen windows and it makes no difference if you say Yes or No.
Any ideas on what to do?

Try deleting the com.apple.Safari.plist
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/com.apple.Safari.plist. Move the .plist to your desktop.
Open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
Thanks to leonie for some information contained in this.
You might need to redo the View settings after an update.

Database not automatically starting after reboot of RedHat ES4 Linux

Hi,
I have Oracle database enterprise edition 9.2.0.4 running on RedHat Linux ES release 4. Although the installation went fine and after the installation I was able to see the common processes like ora_pmon started in system, but when I reboot system the database does not comeup.
I am using dbstart command via a /etc/init.d/oracle file. This is linked to /etc/rc5.d and /etc/rc3.d as well in the Linux server.
The amazing thing is that tnslistener is started automatically after system reboot but not database. That is, when I check the status of that via the command "lsnrctl status" it shows me the one database instance that I am hoping to see correctly. But no ora_pmon etc processes are there.
Even interesting thing is that when I manually run the command "/etc/init.d/oracle start" by hand, it does start the database perfectly fine. This is the same command that I am running via the startup scripts in /etc/rc5.d and othe runlevels.
Please help me finding out why is the database not starting up automatically? I have checked the /u02/app/oracle/product/9.2.0/startup.log which just says reports that Listener has started but after that it does not show anything about database starting up.
Below I am pasting the chunk of /etc/init.d/oracle script that is supposed to start the listener and database. Please have a look at it and tell me what can I be doing wrong in this case?
ORACLE=oracle1
export ORACLE_HOME PATH
LOG=$ORACLE_HOME/startup.log
touch $LOG
chmod a+r $LOG
case $1 in
'start')
echo "$0: starting up" >> $LOG
date >> $LOG
# Start Oracle Net
if [ -f $ORACLE_HOME/bin/tnslsnr ] ; then
echo "starting Oracle Net listener"
su - oracle1 -c "$ORACLE_HOME/bin/lsnrctl start" >> $LOG 2>&1 &
fi
echo "starting Oracle databases"
su - oracle1 -c "$ORACLE_HOME/bin/dbstart" >> $LOG 2>&1
Thanks in advance for your urgent help.
--Smb

Thanks for your reply, actually I have already set the value of $ORACLE_HOME to the correct value as per my installation, sorry that line was cut when I last time pasted the chunk of my /etc/init.d/oracle file because I only wanted to paste the relevant portion of that file.
But here is the complete /etc/init.d/oracle file that I have below, please suggest what might be wrong?
thanks.
#!/bin/sh
# chkconfig: 235 99 01
# description: controls Oracle database startup and shutdown
ORACLE_HOME=/u02/app/oracle/product/9.2.0
PATH=${PATH}:$ORACLE_HOME/bin
HOST=`hostname`
ORACLE=oracle1
export ORACLE_HOME PATH
LOG=$ORACLE_HOME/startup.log
touch $LOG
chmod a+r $LOG
case $1 in
'start')
echo "$0: starting up" >> $LOG
date >> $LOG
# Start Oracle Net
if [ -f $ORACLE_HOME/bin/tnslsnr ] ; then
echo "Shahid starting Oracle Net listener"
su - oracle1 -c "$ORACLE_HOME/bin/lsnrctl start" >> $LOG 2>&1 &
fi
echo "Shahid starting Oracle databases"
su - oracle1 -c "$ORACLE_HOME/bin/dbstart" >> $LOG 2>&1
'stop')
echo "$0: shutting down" >> $LOG
date >> $LOG
# Stop Oracle Net
if [ -f $ORACLE_HOME/bin/tnslsnr ] ; then
echo "stopping Oracle Net listener"
su - oracle1 -c "$ORACLE_HOME/bin/lsnrctl stop" >> $LOG 2>&1
fi
echo "stopping Oracle databases"
su - oracle1 -c "$ORACLE_HOME/bin/dbshut" >> $LOG 2>&1
echo "usage: $0 {start|stop}"
exit
esac
exit
########################################################

CFP2100 not on newwork after reboot

Similar Messages

Maybe you are looking for