CFQuery - Excel file

Hello, everyone.
I'm trying to take a query object and insert the data into an Excel file.  I've tried the CFCONTENT/CFHEADER route, and I get the error message about the file not being the same type as the extension.
Is there a better way to get data into an Excel file?
Thank you,
^_^

Allow me to edit this so that it actually makes sense.
What I just described was with the CFOUTPUT, not CFTEXTAREA CFSPREADSHEET.
Now that I've switched to CFTEXTAREA CFSPREADSHEET with the new type, it does not matter if I open or save the file, it is blank, 0 bytes.  If I save it to desktop and open it, I still get the error message that the file is not the same as the extension claims.  The data is there, CFTEXTAREA CFSPREADSHEET just isn't putting any into the file.
It's been a long day. 
^_^

Similar Messages

  • Importing excel file to SQL Server

    I have an application that needs to import an excel file with
    10 columns of data into an SQL Server database table with 13
    columns of data. Two of the 3 extra database columns are manditory,
    and I need to manipulate the values going in.
    I've determined the best method to do this using coldfusion
    is to import the excel file into a cvs file then use SQL to import
    the cvs file into SQL server. Does anyone know how to import an
    excel document into a cvs file using ColdFusion?
    Thanks!

    A couple of things come to mind. You might consider using DTS
    to import your data directly into SQL Server from Excel, rather
    than putting ColdFusion in the middle. Or, you might consider
    creating a ColdFusion ODBC datasource out of your Excel file, use a
    cfquery to select the applicable data, then insert the data into
    SQL Server in a loop. Not very efficient, but it can be done.
    Phil

  • My page generates an Excel file but sometimes fails if the page loads to slowly...

    I'm having a problem generating an Excel file using CF and
    looping over a bunch of queries to get a table of data to display
    to the user. This is slow but works fine except for an instance
    recently where the page seems to be loading but after a few minutes
    it stops and says "the page cannot be displayed". The error leads
    me to believe it is a server error and not a CF error but I'm not
    sure. I don't have timeout checked in my CF Admin so that should
    mean that I can request pages for as long as I need to right?
    I'm using the cfheader and cfcontent to dynamically generate
    an Excel spreadsheet from my HTML. I tried using the cfflush tag
    and that seemed to help since it pushes content to the browser
    during the page load but it doesn't work with the cfheader and
    cfcontent tags.
    So then I tried using the cfsavecontent tag and then save the
    HTML to a file but again I couldn't use the cfflush tag inside the
    cfsavecontent tag so now I'm stuck.
    The page DOES load when I run in on my local machine with MX
    6.1 Developer Edition and SQL Server Personal Edition. It DOES NOT
    work when I run it on my production server that then calls my
    separate database server. I'm wondering if there is a timeout (non
    CF) set somewhere on the productions server or the database server
    or if there is some sort of limit to the amount of data you can
    transfer between servers?
    I'm totally stumped now so any advice is greatly
    appreciated!

    That didn't work for me and the page times out right about 5
    minutes (300 seconds). I don't have timeout checked in the CF
    Administrator so I don't think it is CF that is causing the
    timeout. I checked IIS also and the timeout is set to 900 seconds.
    Is there a possibility that SQL Server has some sort of
    connection limit and I'm using too many cfquery tags? If anyone has
    experienced a similar problem I would really appreciate the help,
    thanks.

  • Numbers 2.1 when exported as an excel file and my application tries opening it, it says file contains corrupt data.

    I recently updated my iPad to the latest iOS 7 and updated my numbers app to 2.1. When i export it to a excel file and then when my C# application(using gembox library) tries reading it, i would get an error "file contains corrupt data". before making the update to iOS 7 and before updating my numbers the process worked fine!

    That didn't work for me and the page times out right about 5
    minutes (300 seconds). I don't have timeout checked in the CF
    Administrator so I don't think it is CF that is causing the
    timeout. I checked IIS also and the timeout is set to 900 seconds.
    Is there a possibility that SQL Server has some sort of
    connection limit and I'm using too many cfquery tags? If anyone has
    experienced a similar problem I would really appreciate the help,
    thanks.

  • Report Generation tool kit for MS office (Opening an existing excel file and appending to the bottom)

    I don't have any problems creating and filling an excel sheet with data. I use the New Report.vi, Easy Title.vi, and Easy Text.vi to create the file. I then save and dispose properly.
    What I don't seem to be able to do is open the exsting file and append data to the end of the sheet.
    Thanks in advance for your help.
    todd

    Hi Todd,
    You can do this by creating a new Excel report with the existing excel file path wired to the "template" input. Then use "Excel Get Last Row.vi" (located under Report Generation\Excel Specific\Excel General) to obtain the location of the last row. Then use that location to input new data into the file.
    Hope this helps,
    Dan

  • .excel file takes lot of time to open after running Custom Program

    DB:11.2.0.2.0
    Oracle Apps:12.1.3
    O/S:AIX 6.1
    Hi All,
    Issue Description:
    When the report is submitted, the data gets populated into the table in less than 30secs and xml gets generated within a minute.
    But the program takes some time in displaying the output around 5 mins but when we tried with html, it opens up quickly.
    The template has a complex matrix, layout wherein, we are using nested FOR loops to display the data in the required format.
    Yesterday, we ran the report “Custom GL STAT Trial Balance Report” in DEV Instance and for around 500+ records, it took around 5 mins.
    The excel file is only 1 MB and xml generated is 245 KB
    Moreover, recently we had increased the OPP jvm to 3GB to avoid java.lang.memory error what was occurring earlier.
    select DEVELOPER_PARAMETERS
    from FND_CP_SERVICES
    where SERVICE_ID = (select MANAGER_TYPE from FND_CONCURRENT_QUEUES where
    CONCURRENT_QUEUE_NAME = 'FNDCPOPP');
    2 3 4
    DEVELOPER_PARAMETERS
    J:oracle.apps.fnd.cp.gsf.GSMServiceController:-mx3072m
    Could this issue be due to JVM increase issue or something else?
    How, could we monitor the jvm while the report is running to troubleshoot the issue?
    Thanks for your time and help on this if anyone is willing to share such an experience faced before?
    Regards,

    DB:11.2.0.2.0
    Oracle Apps:12.1.3
    O/S:AIX 6.1
    Hi All,
    Issue Description:
    When the report is submitted, the data gets populated into the table in less than 30secs and xml gets generated within a minute.
    But the program takes some time in displaying the output around 5 mins but when we tried with html, it opens up quickly.
    The template has a complex matrix, layout wherein, we are using nested FOR loops to display the data in the required format.
    Yesterday, we ran the report “Custom GL STAT Trial Balance Report” in DEV Instance and for around 500+ records, it took around 5 mins.
    The excel file is only 1 MB and xml generated is 245 KB
    Moreover, recently we had increased the OPP jvm to 3GB to avoid java.lang.memory error what was occurring earlier.
    select DEVELOPER_PARAMETERS
    from FND_CP_SERVICES
    where SERVICE_ID = (select MANAGER_TYPE from FND_CONCURRENT_QUEUES where
    CONCURRENT_QUEUE_NAME = 'FNDCPOPP');
    2 3 4
    DEVELOPER_PARAMETERS
    J:oracle.apps.fnd.cp.gsf.GSMServiceController:-mx3072m
    Could this issue be due to JVM increase issue or something else?
    How, could we monitor the jvm while the report is running to troubleshoot the issue?
    Thanks for your time and help on this if anyone is willing to share such an experience faced before?
    Regards,

  • How can i print an Excel file when in the full screen mode (no print options on toolbar or right clk

    using Vista, sometimes after creating and saving an excel file, the document is not visible when the file is reopened.
    selecting full screen mode makes the document visible, but the toolbars disappear and the print option does not show up on a right click.  How can i print the document and see the document in some other mode than full screen?

    In order to print, you can click the CTRL+P keys to launch the print dialog,
    Regarding the missing toolbar, try clicking the ALT key to shouw the software menu, then look around under the view option for any available toolbar settings,
    If you cannot find it, i would recommend you to try the Microsoft support forums, as they have some more knowledge with their software features
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Is there a way to open Excell file from the server and display in the UI and save it back on to the

    Hello there,
    Is there a way to open Excell file from the server and display in the UI and save it back on to the server? (like showing xell file as a datagrid - add rows, columns etc.)

    Hi Mike,
    Welcome you to the forum.
    You may try:
    SELECT * FROM MyDBNameHere.dbo.OUSR T0
    Thanks,
    Gordon

  • Error While uploading a EXCEL file in Web dynpro - HR_KR_XSTRING_TO_STRING

    Hi,
       I am getting an error while trying to upload a excel file.  I am using the function HR_KR_XSTRING_TO_STRING for conversion. The error message is  "Unable to interpret    as a number"

    First of all, are you sure you know what you are working with here.  If this is standard Excel file in the Microsoft binary/propriatery format there is not function module or class in ABAP that can magically just transform this to a character string.  You should search the forums as this has been discussed extensively.  On that topic, please also do not post duplicate threads.  I have already locked your other thread with the same basic question.
    Instead of the binary/propriatery format of Excel, the file should be saved on the client as a text based format - like XML or Text Tab Delimited. You can then use several different options on the server to convert the XSTRING to STRING and process the content (becuase it was text based to begin with).  You could use CL_BCS_CONVERT, the function modules in the function group SCMS_CONV, or the class CL_ABAP_CONV_IN_CE.

  • Error While uplaoding a EXCEL file in Web dynpro - HR_KR_XSTRING_TO_STRING

    Hi,
        I am getting an error while uploading an excel file in web Dynpro application. i am using the HR_KR_XSTRING_TO_STRING this function. I am getting the following error message 'Unable to interpret    as a number'.

    First of all, are you sure you know what you are working with here.  If this is standard Excel file in the Microsoft binary/propriatery format there is not function module or class in ABAP that can magically just transform this to a character string.  You should search the forums as this has been discussed extensively.  On that topic, please also do not post duplicate threads.  I have already locked your other thread with the same basic question.
    Instead of the binary/propriatery format of Excel, the file should be saved on the client as a text based format - like XML or Text Tab Delimited. You can then use several different options on the server to convert the XSTRING to STRING and process the content (becuase it was text based to begin with).  You could use CL_BCS_CONVERT, the function modules in the function group SCMS_CONV, or the class CL_ABAP_CONV_IN_CE.

  • Need suggestion in uploading dynamic excel file to corresponding columns of internal table

    Hi Friends,
    I have an excel file which doesn't have standard template. Just the users will key in their header (in row1 ) and followed by item details in excel and upload to internal table. Now by doing some internal developments in program I need to place the values in corresponding fields.
    Let me explain with some examples.
    1. I have an internal table
    data : begin of itab occurs 0,
                       f1,
                       f2,
                       f3,
                       f4,
                       f5,
              end of itab.
    2. I have excel file as below
    3 . Now i need to fill my internal table itab as below
    Need to be placed in corresponding fields.
    4. When I used GUI_UPLOAD FM it updates internal table as
    Please give me suggestion on how to achieve it.
    Thanks in advance.

    Hi Kumar,
    use a temporary table to get excel values and then parse them to a second table with the format you want.
    This is pretty basic.
    regards,
    Edgar

  • Steps to prepare and upload  excel  files data to r/3?

    Hi abap experts,
    We have brand new installed ECC system somehow configured but with no master or transaction data loaded .It is new  empty system....We also have some legacy data in excel files...We want to start loading some data into the SAP sandbox step by step and to see how they work...test some transactions see if the loaded data are good etc initial tests.
    Few questions here are raised:
    -Can someone tell me what is the process of loading this data into SAP system?
    -Should this excel file must me reworked prepared somehow(fields, columns etc) in order to be ready for upload to SAP??
    -Users asked me how to prepared their legacy excel files so they can be ready in SAP format for upload.?Is this an abaper  job or it is a functional guy job?
    -Or should the excel files be converted to .txt files and then imported to SAP?Does it really make some difference if files are in excel or .txt format?
    -Should the Abaper determine the structure of those excel file(to be ready for upload ) and if yes,  what are the technical rules here ?
    -What tools should be used for this initial data loads? CATT , Lsmw , batch input or something else?
    -At which point we should test the data?I guess after the initial load?
    -What tools are used in all steps before...
    -If someone can provide me with step by step scenario or guide of loading some kind of initial  master data - from .xls file alignment  to the real upload  - this will be great..
    You can email me  some upload guide or some excel/txt file examples and screenshots documents to excersize....Email: [email protected]
    Your help is appreciated it.!
    Jon

    Depends on data we upload the data from file to R/3 .
    If it is regular updation then we used to get the data from application server files to R/3 since local file updation we can not set up background processing..
    If it is master data upload and that to one time upload then we use presenation server files to SAP R/3..
    See the simple example to upload the data to on master custom table from XLS File
    Program    : ZLWMI151_UPLOAD(Data load to ZBATCH_CROSS_REF Table)
    Type       : Upload program
    Author     : Seshu Maramreddy
    Date       : 05/16/2005
    Transport  : DV3K919574
    Transaction: None
    Description: This program will get the data from XLS File
                 and it upload to ZBATCH_CROSS_REF Table
    REPORT ZLWMI151_UPLOAD no standard page heading
                           line-size 100 line-count 60.
    *tables : zbatch_cross_ref.
    data : begin of t_text occurs 0,
           werks(4) type c,
           cmatnr(15) type c,
           srlno(12) type n,
           matnr(7) type n,
           charg(10) type n,
           end of t_text.
    data: begin of t_zbatch occurs 0,
          werks like zbatch_cross_ref-werks,
          cmatnr like zbatch_cross_ref-cmatnr,
          srlno like zbatch_cross_ref-srlno,
          matnr like zbatch_cross_ref-matnr,
          charg like zbatch_cross_ref-charg,
          end of t_zbatch.
    data : g_repid like sy-repid,
           g_line like sy-index,
           g_line1 like sy-index,
           $v_start_col         type i value '1',
           $v_start_row         type i value '2',
           $v_end_col           type i value '256',
           $v_end_row           type i value '65536',
           gd_currentrow type i.
    data: itab like alsmex_tabline occurs 0 with header line.
    data : t_final like zbatch_cross_ref occurs 0 with header line.
    selection-screen : begin of block blk with frame title text.
    parameters : p_file like rlgrap-filename obligatory.
    selection-screen : end of block blk.
    initialization.
      g_repid = sy-repid.
    at selection-screen on value-request for p_file.
      CALL FUNCTION 'F4_FILENAME'
           EXPORTING
                PROGRAM_NAME = g_repid
           IMPORTING
                FILE_NAME    = p_file.
    start-of-selection.
    Uploading the data into Internal Table
      perform upload_data.
      perform modify_table.
    top-of-page.
      CALL FUNCTION 'Z_HEADER'
      EXPORTING
        FLEX_TEXT1       =
        FLEX_TEXT2       =
        FLEX_TEXT3       =
    *&      Form  upload_data
          text
    FORM upload_data.
      CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
           EXPORTING
                FILENAME                = p_file
                I_BEGIN_COL             = $v_start_col
                I_BEGIN_ROW             = $v_start_row
                I_END_COL               = $v_end_col
                I_END_ROW               = $v_end_row
           TABLES
                INTERN                  = itab
           EXCEPTIONS
                INCONSISTENT_PARAMETERS = 1
                UPLOAD_OLE              = 2
                OTHERS                  = 3.
      IF SY-SUBRC <> 0.
        write:/10 'File '.
      ENDIF.
      if sy-subrc eq 0.
        read table itab index 1.
        gd_currentrow = itab-row.
        loop at itab.
          if itab-row ne gd_currentrow.
            append t_text.
            clear t_text.
            gd_currentrow = itab-row.
          endif.
          case itab-col.
            when '0001'.
              t_text-werks = itab-value.
            when '0002'.
              t_text-cmatnr = itab-value.
            when '0003'.
              t_text-srlno = itab-value.
            when '0004'.
              t_text-matnr = itab-value.
            when '0005'.
              t_text-charg = itab-value.
          endcase.
        endloop.
      endif.
      append t_text.
    ENDFORM.                    " upload_data
    *&      Form  modify_table
          Modify the table ZBATCH_CROSS_REF
    FORM modify_table.
      loop at t_text.
        t_final-werks = t_text-werks.
        t_final-cmatnr = t_text-cmatnr.
        t_final-srlno = t_text-srlno.
        t_final-matnr = t_text-matnr.
        t_final-charg = t_text-charg.
        t_final-erdat = sy-datum.
        t_final-erzet = sy-uzeit.
        t_final-ernam = sy-uname.
        t_final-rstat = 'U'.
        append t_final.
        clear t_final.
      endloop.
      delete t_final where werks = ''.
      describe table t_final lines g_line.
      sort t_final by werks cmatnr srlno.
    Deleting the Duplicate Records
      perform select_data.
      describe table t_final lines g_line1.
      modify zbatch_cross_ref from table t_final.
      if sy-subrc ne 0.
        write:/ 'Updation failed'.
      else.
        Skip 1.
        Write:/12 'Updation has been Completed Sucessfully'.
        skip 1.
        Write:/12 'Records in file ',42 g_line .
        write:/12 'Updated records in Table',42 g_line1.
      endif.
      delete from zbatch_cross_ref where werks = ''.
    ENDFORM.                    " modify_table
    *&      Form  select_data
          Deleting the duplicate records
    FORM select_data.
      select werks
             cmatnr
             srlno from zbatch_cross_ref
             into table t_zbatch for all entries in t_final
             where werks = t_final-werks
             and  cmatnr = t_final-cmatnr
             and srlno = t_final-srlno.
      sort t_zbatch by werks cmatnr srlno.
      loop at t_zbatch.
        read table t_final with key werks = t_zbatch-werks
                                    cmatnr = t_zbatch-cmatnr
                                    srlno = t_zbatch-srlno.
        if sy-subrc eq 0.
          delete table t_final .
        endif.
        clear: t_zbatch,
               t_final.
      endloop.
    ENDFORM.                    " select_data
    and also you can use .txt file upload using Function module - GUI_UPLOAD
    if it is application server then use open datset command.
    Thanks
    Seshu

  • Steps to prepare and upload legacy master data excel files into SAP?

    Hi abap experts,
    We have brand new installed ECC system somehow configured but with no master or transaction data loaded .It is new empty system....We also have some legacy data in excel files...We want to start loading some data into the SAP sandbox step by step and to see how they work...test some transactions see if the loaded data are good etc initial tests.
    Few questions here are raised:
    -Can someone tell me what is the process of loading this data into SAP system?
    -Should this excel file must me reworked prepared somehow(fields, columns etc) in order to be ready for upload to SAP??
    -Users asked me how to prepared their legacy excel files so they can be ready in SAP format for upload.?Is this an abaper job or it is a functional guy job?
    -Or should the excel files be converted to .txt files and then imported to SAP?Does it really make some difference if files are in excel or .txt format?
    -Should the Abaper determine the structure of those excel file(to be ready for upload ) and if yes, what are the technical rules here ?
    -What tools should be used for this initial data loads? CATT , Lsmw , batch input or something else?
    -At which point we should test the data?I guess after the initial load?
    -What tools are used in all steps before...
    -If someone can provide me with step by step scenario or guide of loading some kind of initial master data - from .xls file alignment to the real upload - this will be great..
    You can email me some upload guide or some excel/txt file examples and screenshots documents to excersize....
    Your help is appreciated it.!
    Jon

    hi,
    excel sheet uploading:
    http://www.sap-img.com/abap/upload-direct-excel.htm
    http://www.sap-img.com/abap/excel_upload_alternative-kcd-excel-ole-to-int-convert.htm
    http://www.sapdevelopment.co.uk/file/file_upexcel.htm
    http://www.sapdevelopment.co.uk/ms/mshome.htm

  • Save as dialog window for excel file save ....

    hi!
    i have a jsp that displays all the report names to the clients and when clicked on the report downloads an excel file and saves to the client machine.this is accomplished by calling a servlet that sets the content type as "application/octet-stream" and setting the header as "setHeader("Content-Disposition", "attachment; filename=myExcel.xls")
    and writing the bytes to the excel file.works just perfect.
    now if you open the excel file and make changes to it and try to save it with a different name by clicking 'save as' option from file menu, the 'save as file type' by default shows "text" instead of excel worksheet.
    have you guys come across this problem anytime....
    kindly let me know you have any suggestions ..
    thanks in advance,
    /rahul

    one more point:
    the save as list box displays "myExcel.xls"(with quotes) where it should have displayed simply myExcel.

  • How can I create an csv/excel file using pl/sql and then sending that file

    How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
    I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.

    968776 wrote:
    How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
    I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.You are trying to do it at a wrong place..
    Whay do you want database (pl/sql) code to do these things?
    Anyhow, you may be interested in :
    {message:id=9360007}
    {message:id=9984244}

Maybe you are looking for