Cfquery timeout not work

Hello,
I used the queries timeout attribute to catch exception when
the timeout is fired. I used Oracle driver on coldfusion 7.0.1.
I have long quires and they caused the coldfuion hanged
becuase the timeout not work. please help me in this issue
ASAP.

I used the queries timeout attribute to catch exception when the
timeout
is fired. I used Oracle driver on coldfusion 7.0.1.
I have long quires and they caused the coldfuion hanged
becuase the
timeout not work. please help me in this issue ASAP.
I would not use the timeout attribute. I would check for
mistakes in the Coldfusion code and in the query.

Similar Messages

  • Crystal Enterprise Web Timeout not working

    Post Author: bigjohns97
    CA Forum: Crystal Reports
    I am having trouble administering a crystal reports 10 enterprise server with 5 concurrent licences. I don't know if the users are forgetting to logout and just closing the browser or if we really have an issue with reports not closing their concurrent session once the report is finished. So, in review. 1 How can I make sure the timeouts are working? 2 How can i change the timeout value to a lower number? I tried setting the -defaultsessiontimeout to 5 in hopes is would resolve the issue but it still exists.

    Post Author: bigjohns97
    CA Forum: Crystal Reports
    Bump..
    Nobody has any ideas of why users logging in to the CMC web interface and then accidently closing out of IE without clicking logoff, would cause a concurrent license to be used up until the services were restarted. Surely there is a timeout value or setting i am missing somewhere that would log them out after a certain period of inactivity.
    Please help !!!

  • My Timeout not working , relative time is 3 Minutes, ??

    hi,
    I have an approval request Notification in my workflow. its return type is either Approve/Reject. I have another Timeout transition from that notification ,
    I set the Timeout's Relative time to 3 Minutes, 0 hours and 0 days. Because i want to test it, thats why i make it to 3 minutes. But its not working. Notification status is still OPEN. since i didnot approve or reject inorder to test it .
    And in the Loop Counter standard activity , i make the Loop Limit to 2. and From the Loop Limit activity transition goes to reminder notification, which have the same performer as Approval request notification.
    here is the transition flow.
    Notification ---> Loop Counter ---> Reminder Notification ---> back to the first Notification.
    appreciate your help
    thanks
    Is

    i have run two background process
    one with timeout parameter to Yes and Deffered to No
    second one with Timeout parameter to No and Deffered to Yes.
    I run this process from "Submit Request For" link in "Workflow Manager" page under "Oracle Application Manager" menu under "Workflow Administratr New" responsibility. I also got email notification from workflow saying that process completed with "normal" status.
    still my time out is not working.
    below is my timeout process details:-
    NotificationA ----> LoopCounter ----> ReminderNotification------>backto NotificationA
    NotificationA detail:-
    TimeOut = Relative time ,
    value = Day=0, Hours=0, Minutes=3.
    3 transition from this Notification
    a). Approve
    b). Reject
    c). Timeout
    LoopCounter details :-
    TimeOut =NoTimeOut
    LoopLimit(nod attribute) 2
    2 transition from here
    a) Loop to reminder notification
    b) Exit
    thanks

  • Autoreply Timeout not working properly

    Sun Java(tm) System Messaging Server 6.1 HotFix 0.11 (built Jan 28 2005)
    libimta.so 6.1 HotFix 0.11 (built 16:16:35, Jan 28 2005)
    I saw this happen about a month ago, but wrote it off as a "weirdness", however here's the second report of it. User sets their autoreply (vacation) timeout to say 120 (5 days), however, every message sent in same day from the same sender, gets a reply. That's not how it's supposed to work. I've changed the timeout to 3 days, same thing.
    It doesn't appear to be a system wide thing (I was on vacation last week and mine was set to 3 days and there was no problem). Only certain users are affected. Where else can I investigate this problem? All info in LDIF looks correct. I've found the user.vac file for this person and it has recorded every message (even from the same sender) -so there's dups. If I look at mine from last week where it worked properly - there's only one entry per sender. Any ideas?

    Patch 116568-99 is available:Hmm, I thought that's the last patch I put on - I'm pretty sure that's what I ran....
    There are some autoreply fixes in there.
    Also, "autoreply" is different from "vacation reply".
    Autoreply will reply each time a message comes in.
    . "vacation reply" will pay attention to the timeout
    you set. Perhaps the user is simply setting the
    wrong option?So, are you saying that when someone checks the "enable automatic vacation reply" in the webclient (messenger express not UWC), that does not write the maildeliveryoption=autoreply? I thought that attribute had to be there for the vacation message to work?

  • Timeout not working when calling stored procedure

    Hi,
    We have a Win32 application connected to ORACLE using ODBC API.
    A stored procedure (doing INSERT into 3 tables) is called via
    SQLPrepare and SQLExecute("{CALL SP(IN param...) ...}"), but
    Oracle never time out the statement.
    There are 2 types of modified timeouts:
    SQL_ATTR_QUERY_TIMEOUT = 20
    SQL_ATTR_CONNECTION_TIMEOUT = 60
    Even if I set LockTimeOut parameter in ORAODBC.ini file, it
    still doesn't work.
    I tried with SQLExecDirect("INSERT...") and it works fine.
    - Does time out works with oracle Stored Procedure ?
    - If not, how can I avoid application hangs when calling
    SQLExecute ?
    - I use "lock table MY_TABLE in exclusive mode" to simulate
    query timing out. Is the better way to do this ?
    Please, any help would be GREATLY appreciated :-)
    Thanks.
    -Dario Efine
    [email protected]
    Infos:
    - Application running on WinNT4 SP6a,
    - Oracle ODBC for Oracle 8.01.76.00,
    - Stored procedure has 10 IN parameters, it also uses 2 inner
    small functions.

    HiTopp wrote:
    I get a "Login Failed for user _____" error if I attempt to use incorrect credentials.
    That message is very likely coming from the database. To be sure, turn debugging on in the ColdFusion Administrator. Also check out the logs. We have to narrow this down, otherwise we could end up running circles.
    If the attribute pairs [username="valid_name", password="valid_password"] and [username="", password=""] work, but [username="valid_name", password="invalid_password"] fails, then the cause of the problem is most probably your code, and how it connects to the database(s). Could you show us all (or at least more) of the code?
    My first suggestion to you was to omit the line variables.storedProcService.clear();. Invoking clear() only makes sense when it occurs after addProcResults() or addParam(). Did you omit the line? What was the effect, with and without credentials?
    Could you please describe your infrastructure a bit more. From what I understand, there are at least 2 servers, S1 and S2. Let's say, ColdFusion is installed on S1. I am assuming from what has gone before that SQL Server, which runs the stored procedure, is on the second server S2.
    Go to the 'Client Variables' page in the ColdFusion Administrator. Verify that ColdFusion is indeed configured to use a database for client storage. What is the name of the datasource used as client store? Now, proceed to the datasource page and check out the settings for the client datasource. To which machine/database server does this datasource point?
    Jot down the server settings and credentials of the other datasources configured in the Administrator. To which machine/database server do these datasources point?

  • DB Adapter - JCA Timeout not working?

    Hi ,
    Tried to set jca property for querytimeout as below,(in db adapter jca file)
    <property name="QueryTimeout" value="5"/>
    Call is to a DB stored procedure,when procedure execution takes more than 5 secs,jca timeout excpetion is not getting thrown?
    Can anyone assist on this?Kindly suggest any alternative way too if any?
    Thanks,
    Anitha

    What is the interface of the Stored procedure, if it has any output paramaters, the interface would be synchronous....
    I think in your case, as the stored procedure is not timing out, it is using the value for syncMaxWaitTime property....this is the maximum time a BPEL can wait for a synchronous response...
    See if this helps you...
    BPEL, timeout for DB adapter
    Thanks,
    N

  • Select * for multiple tables in cfquery does not work anymore as it used to with CF5

    I am migrating from CF5. the following code used to work:
    SELECT *
    FROM tablea a, tableb b
    where a.id =b.id
    now I get an error when getting the value of ID (error:
    queryname.ID undefined). I suspect the * is the problem and is not
    permitted in that format with CF 7.
    Any help will be appreciated
    Thanks

    cfdump is, for the most part, a debugging tool which allows
    you to look at varialbes and their values at various points of the
    template. Rarely would you want to let real users see that sort of
    output.
    I'd be suspicious if adding cfdump, and nothing else solved
    the problem. I also wouldn't rely on it as a permanent solution.
    Using select * for a query against more than one table is still
    "sloppy" code and cold fusion tends be less forgiving of sloppy
    code with each upgrade.
    In case you were wondering, it's "sloppy" because it brings
    back more data than you need. You will never need the joining
    fields twice.

  • Windows 7 / 2008 R2 GPO for Screen timeout not working.

    What a joke. Why can't I get a simple screen saver to work VIA gpo with Windows 7 / 2008 R2? What is the fix?
    User Config\admin templates\control panel\Personalization---Enable Screen Saver - Enabled, Prevent Changing Screen Saver -Enabled, Password protect the the screen saver - Enabled, Screen Saver Timeout - Enabled.
    Number of seconds to wait to enabled scrren saver = 600 seconds.
    I have verified these settings via RSOP.msc and group policy modeling. What do I need to get this working!
    HELP WITH THIS SIMPLE TASK PLEASE!!!!!!!!!!!!!!!!!!!!

    Hi Dave Santel,
    Please run the following command on the problematic workstation.
    Gpresult /h > %temp%\gpresult.html  (“%temp%”
    is the path of the gpresult.html, you can set it yourself) 
    Please check this file gpresult.html which is used for checking the resultant of Group Policy information to see if the GPO has applied.
    Regards,
    Lany Zhang

  • Lock Screen Timeout not working since upgrade to 10.2?

    I have always had by Lock Screen Timeout set to 3 mins but since 10.2 upgrade it now appears to be hardcoded to what seems to be about 15 to 30 minutes. Anyone else having this problem?
    This is a bit of security problem if you rely upon screen lock to secure your personal data from unauthorised access. If I put the phone down I want to be assured that it will lock out quite quickly.
    I suspect that the problem is caused by Lock Screen Notifications so I have switched that off for now to see if it helps. I allow Gestures when locked to unlock the screen. Tend to use the power button to lock. Use gesture to unlock.

     Try a reset: when powered on hold down the power button for 10 seconds.
    You can restore your phone to factory settings if you wish to see if it corrects your issue. Resetting to factory settings will wipe out all your data so you should save it first. To save all your stuff download and install BlackBerry Link on your computer from the link below. Resetting will not back-up the OS on your phone. Once you have downloaded and installed BlackBerry Link connect your phone to your computer and save your stuff. Once saved disconnect your phone from the computer.
    To reset your phone: tap the Settings App, scroll down and tap Security and Privacy, tap Security Wipe, tap the blank box and enter blackberry.
    Once Wiped reconnect your phone to your computer and install your stuff.
    http://us.blackberry.com/software/desktop/blackber​ry-link.html
    http://ca.blackberry.com/software/desktop/blackber​ry-link.html

  • Read Timeout is not working with business service in OSB 11.6

    HI All,
    We have set below configuration in "Http Transport Configuration" of a business service.
    Read Timeout- 8
    Connection Timeout  - 8
    Authentication  - None
    Proxy Serve
    Follow HTTP redirects - Disable
    Use Chunked Streaming Mode - Enable
    Even though backend is taking more than the configured value in Read Timeout but timeout is not happening in OSB, Connection time out also not worked, when we tested with wrong backend URL.
    Any help for this configuration would appreciated.
    Thanks,.

    Hi,
         Have you invoked any Services before calling the Business Service.
    If Yes, then the problem with the Invoked service.In this scenario even if you set the time out period it will not work..
    If No, your request payload is high
    Regards,
    Kiran

  • Filter not working for session timeout

    Hi all,
    I am working on a struts application in portal. I want to logout of the application when a user does not perform any action, for say 30 mins. For this, i am using a filter and defined the filter as follows in web.xml.
    <filter>
    <filter-name>PageFilter</filter-name>
    <filter-class>SessionFilter</filter-class>
    </filter>
    <filter-mapping>
    <filter-name>PageFilter</filter-name>
    <url-pattern>/*</url-pattern>
    </filter-mapping>
    Also i gave the timeout in web.xml as follows.
    <session-config>
    <session-timeout>30</session-timeout>
    </session-config>
    And i had the filter servlet as follows.
    public class SessionTimeoutFilter implements Filter
    public SessionFilter()
    public void init(FilterConfig conf) throws ServletException {
    public void destroy()
    // Create a new instance of SessionFilter
    private static int firstRequest = 0;
    public void doFilter(ServletRequest request,ServletResponse response,FilterChain chain)
    throws IOException,ServletException
    HttpServletRequest hreq = (HttpServletRequest)request;
    HttpServletResponse hres = (HttpServletResponse)response;
    HttpSession session = hreq.getSession();
    try{
    if (session.isNew()) {
    if(firstRequest == 0){
    firstRequest++;
    else {
    hres.sendRedirect("http://www.google.com");
    firstRequest = 0;
    return;
    }catch(Exception e){
    e.printStackTrace();
    chain.doFilter(request,response);
    When trying to execute this one i am getting a portlet 500 internal error. I am not sure where i went wrong. Can anyone give me a suggestion for this to work in a portal.?
    Thx in advance....

    Hi,
    Thx for ur reply, Here i am using firstRequest as a counter variable. when the session is new and firstRequest is 1, it means that the session has expired and new session started and this is where i am redirecting to another page. The problem is, i think is mainly because of the sendRedirect i am using there in the code. I think sendRedirect will not work in portal, because when i test this application locally , it is working fine. But when i deploy it in portal, i am getting the error. Can you suggest me an alternative for sendredirect in portal.Even i tried with forward but no use.
    Thx....

  • read-timeout-seconds not working

    (WL 5.1, SP 11)
    Hi all,
    I'm playing around with Read-Only entity beans, and I get a problem
    with the read-timeout-seconds property. I've set my
    weblogic-ejb-jar.xml like this:
    <ejb-name>product.entity</ejb-name>
    <caching-descriptor>
    <max-beans-in-cache>1000</max-beans-in-cache>
    <cache-strategy>Read-Only</cache-strategy>
    <read-timeout-seconds>60</read-timeout-seconds>
    </caching-descriptor>
    The first call to the EJB caches the database record, and subsequent
    calls use the cache. My problem: Even if I delete the database record
    directly (I know, I shouldn't do that... but like I said, I'm playing
    around here... ;)) and wait for more than 60 seconds, the next call to
    the bean still returns the same cached entry.
    I tried with <idle-timeout-seconds> set to 60, and it doesn't work
    neither.
    I've seen in previous messages that this problem (or similar) was
    fixed in SP4, but I use SP11, so it shouldn't be the problem.
    Thanks for your help!
    Phil

    Hi,
         Have you invoked any Services before calling the Business Service.
    If Yes, then the problem with the Invoked service.In this scenario even if you set the time out period it will not work..
    If No, your request payload is high
    Regards,
    Kiran

  • Php include not working

    Good Afternoon.
    I am having a hard time trying to find what needs to be set to allow url
    include statments in php on Netware 6.5 sp3, php5.
    I know my code is correct after trying it on an external server, and it
    seems all other php coding works. Just not the http includes as shown
    below:
    <?php
    include ('http://your.website.here/filenamehere.php');
    ?>
    php.ini is posted below:
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; Under Windows, the compile-time path is the Windows directory. The
    ; path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably
    guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or
    M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an
    expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and
    parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the
    equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend
    extension),
    ; you may only use these constants *after* the line that loads the
    extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file.
    It
    ; sets some non standard settings, that make PHP more efficient, more
    secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes
    from
    ; the standard settings are thoroughly documented, you can go over each
    one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the
    php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it
    features
    ; different values for several directives, in order to improve
    performance, while
    ; possibly breaking compatibility with the standard out-of-the-box
    behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_globals = Off [Security, Performance]
    ; Global variables are no longer registered for input data (POST, GET,
    cookies,
    ; environment and other server variables). Instead of using $foo, you
    must use
    ; you can use $_REQUEST["foo"] (includes any variable that arrives
    through the
    ; request, namely, POST, GET and cookie variables), or use one of the
    specific
    ; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"],
    depending
    ; on where the input originates. Also, you can look at the
    ; import_request_variables() function.
    ; Note that register_globals is going to be depracated (i.e., turned
    off by
    ; default) in the next version of PHP, because it often leads to
    security bugs.
    ; Read http://php.net/manual/en/security.registerglobals.php for
    further
    ; information.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined
    array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the
    execution of
    ; scripts will no longer be displayed as a part of the script output,
    and thus,
    ; will no longer be exposed to remote users. With some errors, the
    error message
    ; content may expose information about your script, web server, or
    database
    ; server that may be exploitable for hacking. Production sites should
    have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur
    during the
    ; execution of your script will be logged (typically, to your server's
    error log,
    ; but can be configured in several ways). Along with setting
    display_errors to off,
    ; this setup gives you the ability to fully understand what may have
    gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically
    results in less
    ; writes, and sometimes less packets sent on the wire, which can often
    lead to
    ; better performance. The gain this directive actually yields greatly
    depends
    ; on which Web server you're working with, and what kind of scripts
    you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc
    global
    ; variables.
    ; - magic_quotes_gpc = off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent
    into
    ; SQL databases without further manipulation. Instead, you should use
    the
    ; function addslashes() on each input element you wish to send to a
    database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP surpresses errors of type E_NOTICE. These error
    messages
    ; are emitted for non-critical errors, but that could be a symptom of
    a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by
    reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are
    recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = On
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant
    browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the
    output
    ; buffering functions. You can also enable output buffering for all files
    by
    ; setting this directive to On. If you wish to limit the size of the
    buffer
    ; to a certain size - you can use a maximum number of bytes instead of
    'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using
    ob_start().
    ; Using this ini directive may cause problems unless you know what
    script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and
    "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling
    the
    ; PHP function flush() after each and every call to print() or echo() and
    each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = off
    ; The unserialize callback function will be called (with the undefined
    class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instanciated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision
    significant
    ; digits after the floating point. The default value ensures that when
    floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by
    reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the
    function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each
    time
    ; you use this feature, and the argument will be passed by value instead
    of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir = "sys:/tmp"
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe
    Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables
    that
    ; the end user won't be able to change using putenv(). These variables
    will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change
    them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; By default this is also set to "sys:/tmp". This is actually the value
    that is
    ; set for the below mentioned "upload_tmp_dir" directive. If
    "upload_tmp_dir" is
    ; changed, change the same for "open_basedir" also. This is done to allow
    ; phpMyAdmin application users to execute SQL commands through an SQL file.
    open_basedir = ".;sys:/tmp"
    ; This directive allows you to disable certain functions for security
    reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security
    reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <font color="??????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the
    server
    ; (e.g. by adding its signature to the Web server header). It is no
    security
    ; threat in any way, but it makes it possible to determine whether you use
    PHP
    ; on your server or not.
    expose_php = On
    ; Resource Limits ;
    max_execution_time = 30 ; Maximum execution time of each script, in
    seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing
    request data
    memory_limit = 64M ; Maximum amount of memory a script may consume
    (8MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often
    result
    ; from a bug in your code, but it's possible that it
    was
    ; intentional (e.g., using an uninitialized variable
    and
    ; relying on the fact it's automatically initialized
    to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best
    interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error
    logging
    ; instead (see below). Keeping display_errors enabled on a production web
    site
    ; may reveal security information to end users, such as file paths on your
    Web
    ; server, your database schema or other information.
    display_errors = Off
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log
    (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the
    source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length
    at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on
    same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this
    setting
    ; is On you will not log errors with repeated messages from different
    files or
    ; sourcelines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = On
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that
    direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from
    http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used
    including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    error_log = "sys:/php5/error.log"
    ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
    ;error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&amp;"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST,
    Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right,
    newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You
    may
    ; want to turn this off if you don't want to clutter your scripts' global
    scope
    ; with user data. This makes most sense when coupled with track_vars - in
    which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily
    lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them
    off,
    ; for performance reasons.
    register_long_arrays = On
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables,
    you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from
    exec(), etc.
    magic_quotes_runtime = off
    ; Use Sybase-style magic quotes (escape ' with '' instead of ').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    ;include_path = ".:/php/includes"
    ; Windows: "path1;path2"
    ;include_path = ".;c:phpincludes"
    ; NetWare
    include_path = ".;sys:/php5/includes"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below.
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = sys:/php5/ext
    ; Whether or not to enable the dl() function. The dl() function does NOT
    work
    ; properly in multithreaded servers, such as IIS or Zeus, and is
    automatically
    ; disabled on them.
    enable_dl = On
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI
    under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache
    or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name
    that PHP
    ; will look for to know it is OK to continue execution. Setting this
    variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers
    to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status:
    header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if
    not
    ; specified).
    upload_tmp_dir = sys:/tmp
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 100M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = On
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ;user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; auto_detect_line_endings = Off
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, on Windows:
    ; extension=msql.dll
    ; ... or under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory
    information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ;Windows Extensions
    ;Note that ODBC support is built in, so no dll is needed for it.
    ;extension=php_bz2.dll
    ;extension=php_cpdf.dll
    ;extension=php_curl.dll
    ;extension=php_dba.dll
    ;extension=php_dbase.dll
    ;extension=php_dbx.dll
    ;extension=php_exif.dll
    ;extension=php_fdf.dll
    ;extension=php_filepro.dll
    ;extension=php_gd2.dll
    ;extension=php_gettext.dll
    ;extension=php_ifx.dll
    ;extension=php_iisfunc.dll
    ;extension=php_imap.dll
    ;extension=php_interbase.dll
    ;extension=php_java.dll
    ;extension=php_ldap.dll
    ;extension=php_mbstring.dll
    ;extension=php_mcrypt.dll
    ;extension=php_mhash.dll
    ;extension=php_mime_magic.dll
    ;extension=php_ming.dll
    ;extension=php_mssql.dll
    ;extension=php_msql.dll
    ;extension=php_mysql.dll
    ;extension=php_oci8.dll
    ;extension=php_openssl.dll
    ;extension=php_oracle.dll
    ;extension=php_pdf.dll
    ;extension=php_pgsql.dll
    ;extension=php_shmop.dll
    ;extension=php_snmp.dll
    ;extension=php_sockets.dll
    ;extension=php_sybase_ct.dll
    ;extension=php_tidy.dll
    ;extension=php_w32api.dll
    ;extension=php_xmlrpc.dll
    ;extension=php_xsl.dll
    ;extension=php_yaz.dll
    ;extension=php_zip.dll
    ;NetWare Extensions
    extension=php_ldap.nlm
    extension=phpmysql.nlm
    extension=php2ucs.nlm
    extension=php_xml.nlm
    extension=php_ossl.nlm
    ; Module Settings ;
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling
    define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Win32 only.
    ;SMTP =
    ;smtp_port = 25
    ; For Win32 only.
    ; sendmail_from =
    ; For Unix only. You may supply arguments as well (default: "sendmail -t
    -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra
    parameters
    ; to the sendmail binary. These parameters will always replace the value
    of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to
    char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an
    explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will
    use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only
    look
    ; at MYSQL_PORT.
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the
    built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo
    get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to
    this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in secondes) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index
    scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLI]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect()
    will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only
    look
    ; at MYSQL_PORT.
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the
    built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo
    get_cfg_var("mysqli.default_password")
    ; and reveal this password! And of course, any users with read access to
    this
    ; file will be able to reveal the password as well.
    mysqli.default_password =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatability mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results
    according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatability mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [dbx]
    ; returned column names can be converted for compatibility reasons
    ; possible values for dbx.colnames_case are
    ; "unchanged" (default, if not set)
    ; "lowercase"
    ; "uppercase"
    ; the recommended default is either upper- or lowercase, but
    ; unchanged is currently set for backwards compatibility
    dbx.colnames_case = "lowercase"
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no
    limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of
    its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of
    its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help
    the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead
    of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that
    case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored. Note: Windows users have to change this
    ; variable in order to use PHP's session functions.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    ;session.save_path = "/tmp"
    session.save_path = sys:/php5/sessiondata
    ; Whether to use cookies.
    session.use_cookies = 1
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = PHPSESSID
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other
    method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit
    register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 0
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeent ry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatability mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one
    batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. Default = 25
    ;mssql.max_procs = 25
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you
    want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [Ingres II]
    ; Allow or prevent persistent links.
    ingres.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ingres.max_persistent = -1
    ; Maximum number of links, including persistents. -1 means no limit.
    ingres.max_links = -1
    ; Default database (format: [node_id::]dbname[/srv_class]).
    ingres.default_database =
    ; Default user.
    ingres.default_user =
    ; Default password.
    ingres.default_password =
    [Verisign Payflow Pro]
    ; Default Payflow Pro server.
    pfpro.defaulthost = "test-payflow.verisign.com"
    ; Default port to connect to.
    pfpro.defaultport = 443
    ; Default timeout in seconds.
    pfpro.defaulttimeout = 30
    ; Default proxy IP address (if required).
    ;pfpro.proxyaddress =
    ; Default proxy port.
    ;pfpro.proxyport =
    ; Default proxy logon.
    ;pfpro.proxylogon =
    ; Default proxy password.
    ;pfpro.proxypassword =
    [Sockets]
    ; Use the system read() function instead of the php_read() wrapper.
    sockets.use_system_read = On
    [com]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constat registrations
    ;com.autoregister_verbose = true
    [LDAP]
    ; Path to a directory which contains SSL certificates to be used for LDAP
    over SSL
    ; Terminate the path with /
    ldap.ssl_cert_dir = "sys:/php5/cert/"
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation accoding to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    ;fbsql.batchSize = 1000
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as
    JIS.
    ; With mbstring support this will automatically be converted into the
    encoding
    ; given by corresponding encode setting. When empty
    mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola
    and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; Local Variables:
    ; tab-width: 4
    ; End:
    [Imagemagick Extension - Added By GKO - 08.01.05]
    extension=php_imagick.nlm
    Thank you for any insight you can give ... I am not a php person.
    Tony

    Tony,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • IPhone 4 ear speaker not working after 2 restores and cleaning the headphone socket.

    Hi,
    I know this problem is not uncommon, but here goes...
    I have an iPhone 4 which was running iOS 5.1.1 a few days ago when the ear speaker stopped working.  I cant hear the other person when I make or recieve a call, but nothing else is wrong with the phone.  It is 18 months old.
    I've searched the discussions and seen some of the suggestions.  I tried cleaning out the headphone socket, with no luck.  I then tried a full restore and update to iOS 6.  This appeared to have worked.  I tried 2 calls and I could hear the other person.  I then left the phone alone for a couple of hours and when I tried it again, it had stopped working again.
    I have since done another full restore but the speaker is still not working at all.  The fact that it worked after the first restore suggests it's something simple or software related but I have no idea what else to try other than getting it repaired in a shop.  The problem is I am in Japan where my network (Softbank) and an independent repair shop have both quoted me the equivalent of $176 / £110 to fix it.
    Does anyone know anything else I can try before I give in and end up shelling out this ridiculous cost for something that is probably a 20 minute fix?
    Any help would be appreciated.
    Thanks

    I have the exact same problem with my ear speaker after my IOS 6 upgrade. My speakers work, bluetooth works, the earphones work, but the ear speaker doesn’t work. I noticed this IMMEDIATELY after the upgrade was completed. I also have the following problems:
    -Very slow call connect time. 30 - 45 seconds just to connect is typical. Signal strength is 5 bars (ATT)
    -Problems attaching to known networks
    -Very slow internet browsing with many timeouts on both the ATT 3G service and known Wi-Fi networks.
    - My camera was missing after the IOS 6 upgrade. I restored that from Restrictions inside of the Settings App
    - Music was so screwed up it was easier to just restore it
    I went to the Apple store hoping to get some support. Between my wife, my son, and myself we have purchased 4 iPhones and an iPad over the last few years with plans to purchase another iPad in a month or so. So it’s not like I' not familiar with Apple Technology and their typical level of support.
    The individual who waited on me was rude and condescending. He insisted that all of the problems were hardware related or ATT’s fault, or my fault. He further asserted that IOS 6 had NOTHING to do with any of the problems. I pointed out that it would be quite a coincidence for my hardware to break, for ATT to have network problems, and for me to suddenly forget how to use an iPhone at the same exact moment that IOS 6 had been installed. He maintained his position and offered to sell me another phone.
    I don’t expect the folks in the store to reprogram the OS. Mistakes happen. I’m going to guess that Apple’s OS programmers are already working on a fix for many of the IOS 6 complaints that are easy to find on Google. Assigning blame to the customer and denying any responsibility is not a model for success or customer service. I’m sure Apple wouldn’t accept that kind of excuse from their component manufacturers and don’t think it is how they should deal with their customers. Further, Apple wants to own the device. They want to control the apps, the OS, battery, the delivery channel. I’m good with that so long as when there is a problem, they own that as well.
    And BTW… I’m not including the maps in my list of issues with IOS 6 because I kind of like the new maps and am willing to give Apple the benefit of the doubt. I believe that their map service will get a lot better in a hurry.

  • [SOLVED] SQLite not working with PHP

    For reasons unknown, I cannot get PHP to work properly with SQLite. I have uncommented the "extension=sqlite.so" in /etc/php/php.ini, ensured that PHP's configuration was being loaded from said file, and made sure PHP was working fine with my server of choice (lighttpd). Unfortunately, it doesn't seem to work, as evidenced by
    Fatal error: Call to undefined function sqlite_open() in test.php on line x
    Which is what PHP spits at me. I've checked lighty's logs and nothing's wrong. PHP's set to send to syslog, so I'm not sure where I could check on that. Here is a quick look at PHP's setup.
    My /etc/php/php.ini:
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; The path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file. It
    ; sets some non standard settings, that make PHP more efficient, more secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes from
    ; the standard settings are thoroughly documented, you can go over each one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it features
    ; different values for several directives, in order to improve performance, while
    ; possibly breaking compatibility with the standard out-of-the-box behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the execution of
    ; scripts will no longer be displayed as a part of the script output, and thus,
    ; will no longer be exposed to remote users. With some errors, the error message
    ; content may expose information about your script, web server, or database
    ; server that may be exploitable for hacking. Production sites should have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur during the
    ; execution of your script will be logged (typically, to your server's error log,
    ; but can be configured in several ways). Along with setting display_errors to off,
    ; this setup gives you the ability to fully understand what may have gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically results in less
    ; writes, and sometimes less packets sent on the wire, which can often lead to
    ; better performance. The gain this directive actually yields greatly depends
    ; on which Web server you're working with, and what kind of scripts you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc global
    ; variables.
    ; - magic_quotes_gpc = Off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent into
    ; SQL databases without further manipulation. Instead, you should use the
    ; database vendor specific escape string function on each input element you
    ; wish to send to a database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP suppresses errors of type E_NOTICE. These error messages
    ; are emitted for non-critical errors, but that could be a symptom of a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; - short_open_tag = Off [Portability]
    ; Using short tags is discouraged when developing code meant for redistribution
    ; since short tags may not be supported on the target server.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = Off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long request, which may end up
    ; being interrupted by the user or a browser timing out.
    ; ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; realpath_cache_size=16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; realpath_cache_ttl=120
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = Off
    ; Resource Limits ;
    max_execution_time = 30 ; Maximum execution time of each script, in seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
    ;max_input_nesting_level = 64 ; Maximum input variable nesting level
    memory_limit = 32M ; Maximum amount of memory a script may consume (32MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors, except coding standards warnings
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    ; possible values for display_errors:
    ; Off - Do not display any errors
    ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout - Display errors to STDOUT (default)
    ; To output errors to STDERR with CGI/CLI:
    ;display_errors = "stderr"
    ; Default
    display_errors = On
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line unless ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = Off
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Turn off normal error reporting and emit XML-RPC error XML
    ;xmlrpc_errors = 0
    ; An XML-RPC faultCode
    ;xmlrpc_error_number = 0
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=#ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    ;error_log = filename
    ; Log errors to syslog.
    error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = Off
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; When enabled, the SERVER and ENV variables are created when they're first
    ; used (Just In Time) instead of when the script starts. If these variables
    ; are not used within a script, having this directive on will result in a
    ; performance gain. The PHP directives register_globals, register_long_arrays,
    ; and register_argc_argv must be disabled for this directive to have any affect.
    auto_globals_jit = On
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = Off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off
    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    default_charset = "utf-8"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = "/usr/lib/php/20060613/"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; Disable logging through FastCGI connection
    ; fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 2M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = Off
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ; user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    ;date.timezone =
    ;date.default_latitude = 31.7667
    ;date.default_longitude = 35.2333
    ;date.sunrise_zenith = 90.583333
    ;date.sunset_zenith = 90.583333
    [filter]
    ;filter.default = unsafe_raw
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [sqlite]
    sqlite.assoc_case = 1
    [Pcre]
    ;PCRE library backtracking limit.
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ;pcre.recursion_limit=100000
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [OCI8]
    ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ;oci8.ping_interval = 60
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ;oci8.default_prefetch = 10
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ;oci8.old_oci_close_semantics = Off
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Notice message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatibility mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    session.save_path = "/tmp"
    ; Whether to use cookies.
    session.use_cookies = 1
    ;session.cookie_secure =
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = PHPSESSID
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    session.cookie_httponly =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 1
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.comf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ;com.autoregister_verbose = true
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_encoding = Off
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.show_timestamp_decimals = Off
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    [gd]
    ; Tell the jpeg decode to libjpeg warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; available extensions
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    ;extension=curl.so
    ;extension=dba.so
    ;extension=dbase.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=gmp.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=json.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mhash.so
    ;extension=mime_magic.so
    ;extension=mysql.so
    ;extension=mysqli.so
    ;extension=ncurses.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=posix.so
    ;extension=pspell.so
    extension=session.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    extension=sockets.so
    extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    extension=zlib.so
    ; Local Variables:
    ; tab-width: 4
    ; End:
    I've attempted enabling pdo.so and pdo_sqlite.so as well, with no results, making sure to stop lighty and flush all of its processes before checking again.
    `php-cgi -m | grep sqlite` does not return anything, either.
    The extensions directory (/usr/lib/php/20060613) exists on my system and contains sqlite.so, as expected.
    I have no clue what's going on here and would greatly appreciate any help offered.
    Last edited by xelados (2009-09-23 04:02:22)

    After the last update which installed PHP 5.3.0, I'm having a similar problem. PHP fails to recognize any extensions which I've defined in php.ini. PHP itself works just fine, so I'm sure this problem is related to the update of PHP.
    Here's my php.ini:
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; The path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file. It
    ; sets some non standard settings, that make PHP more efficient, more secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes from
    ; the standard settings are thoroughly documented, you can go over each one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it features
    ; different values for several directives, in order to improve performance, while
    ; possibly breaking compatibility with the standard out-of-the-box behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the execution of
    ; scripts will no longer be displayed as a part of the script output, and thus,
    ; will no longer be exposed to remote users. With some errors, the error message
    ; content may expose information about your script, web server, or database
    ; server that may be exploitable for hacking. Production sites should have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur during the
    ; execution of your script will be logged (typically, to your server's error log,
    ; but can be configured in several ways). Along with setting display_errors to off,
    ; this setup gives you the ability to fully understand what may have gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically results in less
    ; writes, and sometimes less packets sent on the wire, which can often lead to
    ; better performance. The gain this directive actually yields greatly depends
    ; on which Web server you're working with, and what kind of scripts you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc global
    ; variables.
    ; - magic_quotes_gpc = Off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent into
    ; SQL databases without further manipulation. Instead, you should use the
    ; function addslashes() on each input element you wish to send to a database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP suppresses errors of type E_NOTICE. These error messages
    ; are emitted for non-critical errors, but that could be a symptom of a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; - short_open_tag = Off [Portability]
    ; Using short tags is discouraged when developing code meant for redistribution
    ; since short tags may not be supported on the target server.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = Off
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = Off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long request, which may end up
    ; being interrupted by the user or a browser timing out.
    ; ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; realpath_cache_size=16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; realpath_cache_ttl=120
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = Off
    ; Resource Limits ;
    max_execution_time = 120 ; Maximum execution time of each script, in seconds
    max_input_time = 120 ; Maximum amount of time each script may spend parsing request data
    ;max_input_nesting_level = 64 ; Maximum input variable nesting level
    memory_limit = 128M ; Maximum amount of memory a script may consume (32MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors, except coding standards warnings
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    ; possible values for display_errors:
    ; Off - Do not display any errors
    ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout - Display errors to STDOUT (default)
    ; To output errors to STDERR with CGI/CLI:
    ;display_errors = "stderr"
    ; Default
    display_errors = On
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = Off
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = Off
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    ;error_log = filename
    ; Log errors to syslog.
    error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = Off
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; When enabled, the SERVER and ENV variables are created when they're first
    ; used (Just In Time) instead of when the script starts. If these variables
    ; are not used within a script, having this directive on will result in a
    ; performance gain. The PHP directives register_globals, register_long_arrays,
    ; and register_argc_argv must be disabled for this directive to have any affect.
    auto_globals_jit = On
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 128M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = Off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off
    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    ;include_path = ".:/usr/share/pear"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = "/usr/lib/php/modules/"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    ; cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; Disable logging through FastCGI connection
    ; fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 128M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = On
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ; user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 10
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    ;date.timezone =
    ;date.default_latitude = 31.7667
    ;date.default_longitude = 35.2333
    ;date.sunrise_zenith = 90.583333
    ;date.sunset_zenith = 90.583333
    [filter]
    ;filter.default = unsafe_raw
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [sqlite]
    ;sqlite.assoc_case = 0
    [xmlrpc]
    ;xmlrpc_error_number = 0
    ;xmlrpc_errors = 0
    [Pcre]
    ;PCRE library backtracking limit.
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ;pcre.recursion_limit=100000
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [OCI8]
    ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ;oci8.ping_interval = 60
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ;oci8.default_prefetch = 10
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ;oci8.old_oci_close_semantics = Off
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatibility mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    session.save_path = "/www/sessions"
    ; Whether to use cookies.
    session.use_cookies = 1
    ;session.cookie_secure =
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = ServerSessionIdentifier
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    session.cookie_httponly = 1
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 30
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 3600
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 1
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = none
    ; Document expires after n minutes.
    session.cache_expire = 0
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 1
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 6
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    ;url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.comf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ;com.autoregister_verbose = true
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_encoding = Off
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.show_timestamp_decimals = Off
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    [gd]
    ; Tell the jpeg decode to libjpeg warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; available extensions
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    ;extension=curl.so
    ;extension=dba.so
    ;extension=dbase.so
    ;extension=exif.so
    ;extension=ftp.so
    extension=gd.so
    extension=gettext.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=json.so
    ;extension=ldap.so
    extension=mcrypt.so
    ;extension=mime_magic.so
    extension=mysql.so
    ;extension=mysqli.so
    ;extension=ncurses.so
    ;extension=odbc.so
    extension=openssl.so
    extension=pdo.so
    extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=posix.so
    ;extension=pspell.so
    extension=session.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    extension=sockets.so
    ;extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    extension=zlib.so
    ; Local Variables:
    ; tab-width: 4
    ; End:
    Some more info:
    [root@Taurine etc]# php-cgi -m
    [PHP Modules]
    cgi-fcgi
    Core
    ctype
    date
    dom
    ereg
    fileinfo
    filter
    gettext
    hash
    libxml
    mbstring
    mysql
    mysqlnd
    openssl
    pcre
    PDO
    pdo_mysql
    Reflection
    session
    SimpleXML
    sockets
    SPL
    standard
    tokenizer
    xml
    xmlreader
    xmlwriter
    zlib
    [Zend Modules]
    [root@Taurine etc]# php-cgi -v
    PHP 5.3.0 with Suhosin-Patch (cgi-fcgi) (built: Sep 16 2009 13:55:34)
    Copyright (c) 1997-2009 The PHP Group
    Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies
    [root@Taurine etc]# cd /usr/lib/php/modules/
    [root@Taurine modules]# ls -alh
    totalt 3,2M
    drwxr-xr-x 2 root root 4,0K 16 sep 13.57 .
    drwxr-xr-x 4 root root 4,0K 16 sep 13.57 ..
    -rwxr-xr-x 1 root root 27K 16 sep 13.57 bcmath.so
    -rwxr-xr-x 1 root root 21K 16 sep 13.57 bz2.so
    -rwxr-xr-x 1 root root 25K 16 sep 13.57 calendar.so
    -rwxr-xr-x 1 root root 51K 16 sep 13.57 dba.so
    -rwxr-xr-x 1 root root 52K 16 sep 13.57 exif.so
    -rwxr-xr-x 1 root root 46K 16 sep 13.57 ftp.so
    -rwxr-xr-x 1 root root 11K 16 sep 13.57 gettext.so
    -rwxr-xr-x 1 root root 37K 16 sep 13.57 iconv.so
    -rwxr-xr-x 1 root root 1,2M 16 sep 13.57 imap.so
    -rwxr-xr-x 1 root root 35K 16 sep 13.57 json.so
    -rwxr-xr-x 1 root root 43K 16 sep 13.57 mysql.so
    -rwxr-xr-x 1 root root 109K 16 sep 13.57 mysqli.so
    -rwxr-xr-x 1 root root 110K 16 sep 13.57 openssl.so
    -rwxr-xr-x 1 root root 98K 16 sep 13.57 pdo.so
    -rwxr-xr-x 1 root root 24K 16 sep 13.57 pdo_mysql.so
    -rwxr-xr-x 1 root root 286K 16 sep 13.57 phar.so
    -rwxr-xr-x 1 root root 26K 16 sep 13.57 posix.so
    -rwxr-xr-x 1 root root 9,8K 16 sep 13.57 shmop.so
    -rwxr-xr-x 1 root root 356K 16 sep 13.57 soap.so
    -rwxr-xr-x 1 root root 46K 16 sep 13.57 sockets.so
    -rwxr-xr-x 1 root root 355K 16 sep 13.57 sqlite.so
    -rwxr-xr-x 1 root root 15K 16 sep 13.57 sysvmsg.so
    -rwxr-xr-x 1 root root 8,3K 16 sep 13.57 sysvsem.so
    -rwxr-xr-x 1 root root 11K 16 sep 13.57 sysvshm.so
    -rwxr-xr-x 1 root root 79K 16 sep 13.57 xmlrpc.so
    -rwxr-xr-x 1 root root 79K 16 sep 13.57 zip.so
    Last edited by nullvoid (2009-09-22 17:39:47)

Maybe you are looking for

  • Toshiba laptop will not boot up

    Hello. A couple days ago my younger brother (in a fit of rage on a video game he was playing on the laptop) slammed the laptop shut and tossed it on his bed. I took the laptop and tried turning it on and got nothing. I have reached a screen where it

  • Auto-refresh search result (for activities)

    Hi all, we've got a customer requirement to implement a auto-refresh function for the search result for activities, means, the search result table should automatically be updated every x minutes. In component BT126S_APPT, view layout ApptSQ.htm, I've

  • How long is the power cable?

    I'd like to know how far away from a power socket can I place this camera? 

  • Local client copy of 000 after installation fails

    I'm trying to install XI. I installed Web AS 6.40 (from the SR1 installation) ABAP stack. Before installing the Java Add-In I need to make a copy of client 000. I login using client 000 and SAP*, goto SCCL and without even getting to the transaction

  • Include Develop settings in metadata inside JPEG, TIFF, and PSD files ignored when unchecked

    In the Catalog Settings under the Metadata tab, I have unchecked the option 'Include Develop settings in metadata inside JPEG, TIFF and PSD files'. I then selected a JPEG photograph in the Library module and chose Metadata/Save Metatdata to File.  I