CFSTKE* Queues with few entries executing for long durations  (10 hrs)

In APO 7.0 the CFSTKE* Queues with few entries executing for long durations  (10 hrs)
Below are the FM from the queue 
/SAPAPO/CIF_IRQ_REDUCT_INBOUND
/SAPAPO/CIF_STOCK_INBOUND
/SAPAPO/CIF_SL_DOC_INBOUND
/SAPAPO/CIF_SL_DOC_INBOUND
Do any one have the same problem and any fixes ?
Thank You

Hi Aravind,
What is the status of your queue:
Is it in status running, ready or sysfail?
If it is in "Running" status since last 10 hours then check the following things:
Check SM51 and see if you find a long running process, see if it is trying to do a sequential read on some table.
If yes then ask your Basis team to run ST04 and see what index it is using,
If that is also fine then ask them to check stat on that table.
Builiding stat may help if a read on table is taking long time and index which is being picked up is correct.
Your basis team should be able to help you.
I hope it helps.
Thanks,
Anupam
Edited by: Anupam Sengar on Aug 11, 2011 12:06 AM

Similar Messages

  • Workflow trf executing for longer time

    Hi All,
    Workflow trfc executing for longer time in transaction SM58. Why will this happen ? Is there any resolution available ? Please advise on this issue. Below are the details :
    Caller: WF-BATCH
    Function Module: SWW_WI_EXECUTE_INTERNAL_RFC
    Status Text: Transaction Executing
    Program: SAPMSSY1
    Kind Regards
    Shiva

    Hi,
    Check if WF-BATCH user is not locked or the pwd changed. The same as the process started, see the event trace if you are triggering any wflow from this. And CLick on the event and see the "REceiver Data" and "Trace Data" if any errors are there.
    Sometimes, if this user got locked for some reason, it results in issues like you mentioned.
    Hope this helps
    venu

  • Does Reports 9i comes with a runtime executable for Solaris?

    Does anyone know if Oracle Reports 9i comes with a runtime executable for Solaris that I can just install and call to generate my reports without having to install Oracle 9iAS?

    I dont think you will be able to run reports in Reports 9i without IAS R2. I was told by an Oracle employee that Reports 9i has been ready for some time but that it has not yet been released because it can not function without IAS R2.

  • User Event Case getting tied up for long duration in LV 2009 (with SP1)?

    Quick question here...is there any decent reason the user event case is getting tied up for long durations in LV 2009.SP1?  In 8.5 I never had an issue with my code doing this, though when converting to 2009.SP1 I am running into huge lock-up issues with the user event case.

    I have not seen aby issues...
    You are saying that the code from LV8.5 (unmodified) behaves differently in LV2009 SP1?
    Can you post your code?

  • BPM Process Sleep / Wait for long duration - is it feasable in SAP PI?

    Hi
    We have a business requirement where based on a particular date in the future, we require a message we receive to "wait" until that date before it can bed processed (several weeks/months).
    I understand that there is a "wait" step in CCBPM - has anybody had any experience with using this step for "long running processes".
    When using this, is SAP PI intelligent enough to "sleep" and free resources for this process until the date arrives in the wait step?
    What happens with other messages hitting the BPM and there is a process on a wait step? Can queing be setup that subsequent messages that are not on a wait step be processed ahead of the BPM sitting on a wait step?
    Are there any other better solutions in SAP PI instead of using BPM wait for a long running transaction (several weeks)?
    Thanks in advance.

    Hi,
    AFAIK it's an anti pattern to run a process over such a long time.
    Here it's said that at should not longer run than a few days:
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/d92e428819da2ce10000000a1550b0/frameset.htm
    But even a day is quite a long time.
    All informations of the process must get stored and it's very memory consuming specially if you expext a lot process instances.
    It would try to avoid this situation.
    Regards
    Patrick

  • Whenever I browse the apple website for long duration on my it ouch 4g the safari web page suddenly gets stuck

    Whenever I browse the apple website for long duration on my it ouch 4g the safari web page suddenly gets stuck&Goes off &am left on the homescreen I have an ipodtouch 4g 32giggs with ios 5.0.1&is non jailbroken so if any suggestions please reply!

    Boo. I can't edit. Sorry...
    I also want to note that my iPad is -not- rooted and is quite new. And also that it's a third generation iPad.

  • Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

    Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

    Hi,
    Did the issue happen only for you or for multiple users?
    Make sure phone update to the latest firmware.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • DISASSEMBLE is being executed for long time in SPAM

    Hi ,
    I am trying to applying SAP_BASIS patch in new XI 3.0 server .But it got hanged in <b>DISASSEMBLE is being executed</b> for long time in SPAM.
    Can any one will me to solve in this issue.
    Thank You !
    Gopnath.G

    Hi
    The following Patch manager may be useful
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCUPGOCSSPAM/BCUPGOCSSPAM.pdf
    Regards,
    Sai

  • SP Executes For Long Time

    Hi There,
    I'm having 150 lines of SQL statements (SQL Server 2000),
    with 5 parameters, executes in 12 seconds. But when I make a Stored
    Procedure out of it (with exactly the same 150 lines of code) with
    5 input paramentes, the execution take from 5 to 10 minutes.
    There is a huge difference in execution time 12 sec vs 10
    minutes for exectuing the same code. Has anyone experianced this
    before?
    Many thanks

    You can tell Apple directly at the link below.
    http://www.apple.com/feedback/appletv.html

  • Flat file data sources info pack executing for long time with yellow

    I can see flat file all records 140 in above screen but i could not see data in PSA . when i am trying to see the PSA it show not data .
    I have tries to make status to green but still request not process to Data target .

    HI,
    When you see message like there is no psa mean data source was not in active.
    so activate your data source Thru by using SE38 - RSDS_DATASOURCE_ACTIVATE_ALL(bw 7.x).
    After the activation you can try to load data.before that make your yellow request to red status and delete it.
    later reload the same flat file.
    Thanks

  • Memory Leak with Oracle ODBC Driver for Long Raw columns

    Oracle version : 8.1.7
    Platform : Win2K
    Oracle ODBC Driver version : 8.0.1.7.5.0.0
    Hi,
    I've got an Oracle database upgraded from
    V8.0.5 to V8.1.7 which has a table having one long raw +
    normal columns. I was able to observe distinct memory
    leaks (approx 80K) when using ODBC interface calls (thro C++ code) that referenced a combination of normal & long raw columns in a select statement. However, this leak was not observed when only normal columns were present in the
    select statement. Is there any known restriction for using
    long raw columns with other columns? Or do long raw columns have a known memory leak problem thro ODBC?
    Thanks!
    Regards
    Sanchayan

    Did you ever get an answer on this issue?
    Thanks in advance

  • Problem with quick entry autofill for Things application

    I use Firefox as my standard browser and the application Things for my task management. Until recently I could easily use the quick entry autofill function (ctrl alt space) to copy a link to a task in Things. This suddenly stopped working. I contacted Things support, thinking it was a problem with their application, but it appears Firefox is the culprit (that was found in the output from my Mac's console and I also found that in Safari the shortkey still works). I am updated to the latest version and would really like to keep using Firefox.
    This was the output from my Mac's console:
    27-10-14 18:10:00,766 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorMessage = Firefox got an error: Can’t get «class curl» of window 1.
    27-10-14 18:10:00,766 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorRange = NSRange: {118, 12}
    27-10-14 18:10:00,766 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorBriefMessage = Can’t get «class curl» of window 1.
    27-10-14 18:10:00,767 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorNumber = -1728
    27-10-14 18:10:00,767 Things Helper[268]: AppleScript execution error: NSAppleScriptErrorAppName = Firefox
    I hope you can help me fix this problem.
    Kind regards

    The bug I found about Apple Script changing the read/write permissions of api was a dead end and looks like it is till waiting to be worked on [https://bugzilla.mozilla.org/show_bug.cgi?id=608049]
    I am sorry I do not have any updates on this issue at this time.

  • Problem with RBDMIDOC in executing for diff logical systems

    Hi ALL,
    We are using message type HRMD_A and we have configured two logical systems using that message.So when we execute RBDMIDOC to generate idoc for change pointers  it triggers idocs to both the logical system which we dont want.Is there any other program apart PFAL which does the same job of RBDMIDOC and we can give logical system as input parameter
    Thanks
    Bala Duvvuri

    Vijay,
    we cannot have the scenario which I mentioned unless we develop a custom program from scratch that accepts logical system as input parameter
    Thanks
    Bala Duvvuri

  • Error 1502: A script has executed for longer than the default timeout period of X seconds.

    Hi,
    I have a swf that i can´t change (i don´t own the code and it´s copyrighted). In some cases, I´m getting error 1502, after 30 seconds executing the file.
    Is there a way to change or disable the default timeout period? Remember that i can´t edit the .fla...
    Thanks in advance!

    you can load that swf into another swf and adjust the timeout duration in the main swf.

  • Service of machine along with few material purchase for machine

    Dear All,
    I am giving one machine for servicing, the service provider will do the service & will replace certain materails. For this whether i need to raise 2 seperate po's ?
    If one po is enough, then where i need to mention 2 different taxes. ie, service tax & mat tax
    pls advice
    regds,
    CB

    Hi,
    Yes.You have to maintain it as two different items in PO.
    If you know the materials which he is going to replace,you can plan it in a PO.
    Regards,
    Deepak.

Maybe you are looking for

  • T61 - Half theCore speed at maximum performanc​e mode.

    Hello, My T61 was bought during March 2008. I recently installed CPU-Z and was bit worried since under maximum performance mode, the CPU was not throttling to full speed (with AC power). The core speed is showing approximately 1200MHz. FSB is showing

  • AS 101 question on loops

    I'm stuck on something that's really fundamental and it's driving me nuts. I've got five buttons labeled "btn_1", "btn_2", etc. When a button is pressed, I'd like to trace it's corresponding number. When I try this: for(var i:Number=1;i<6;i++){ this[

  • Tabs in the Printout

    Hi i m using .. \t to seperate different colums. I dont want to use a table or a list as the program is very simple, all i want is that output shud look well formatted & aligned, with a tab separation. On screen it looks OK , but when i print it , "/

  • My ID files will no longer open?: I need to update our catalog. Please help

    My archived ID Files will no longer open in ID 2014. Please help, I need to update our catalog.

  • HT202213 can't find home sharing icon on my imac

    I dont have the home sharing icon to connect up apple tv