Cfthread Error, Cannot Find File "taglib.cftId"

I am using several threads within a ColdFusion request to create PDF files. When I run the code on my ColdFusion developers edition environment, it works just fine. However, when I attempt to run it on another environment, I always get the same error:
An error occurred when performing a file operation read on file MYAPPDIRECTORY\WebRoot\WEB-INF\cftags\META-INF\taglib.cftld. The cause of this exception was: java.io.FileNotFoundException: MYAPPDIRECTORY\WebRoot\WEB-INF\cftags\META-INF\taglib.cftld (The system cannot find the path specified).
The issue is of course that ColdFusion is looking in the incorrect directory. I researched the issue and found the mention of a ColdFusion bug, but I am curious if anybody else has run into a similar issue and if they found a workaround/solution.

This bug does not seem to be fixed, but Zack1590's workaround will solve the problem.
The issue is that getSupportedTagAttributes cannot find the correct path for /WEB-INF as getRealPath does not work inside the cfthread. Luckily the results of getSupportedTagAttributes are cached in server memory. This means that if the tags are called from outside a cfthread first they will then work fine inside the cfthread. By making sure all the custom tags are called before entering the cfthread Zack1590 is able to avoid this error.
More info: http://www.danielgaspar.com/blog/2012/12/taglib-cftld-the-system-cannot-find-the-path-spec ified/

Similar Messages

Storage Spaces, Get-FileIntegrity error: cannot find file

Problem:
When I run Get-FileIntegrity in PS on a file that exists in a Storage Spaces ReFS Mirror, I get the following error message:
Get-FileIntegirty : The system cannot find the file specified. FullyQualifiedErrorId : HRESULT 0x80070002,Get-FileIntegrity (See screenshot for full error).
I tried on several different files. I opened the files on the Storage Spaces volume to make sure they existed and could be opened. I tried with several files. I also tried piping Get-Item into Get-FileIntegrity (sugested
here). I tried several variations in syntax. No luck.
I am following the
usage from technet.
I am new to powershell and Storage Spaces.
Any ideas on how to make the command work?
Background:
I installed the evaluation version of Windows 8.1 Enterprise on new hardware (ASUS Z97, Intel i5, 8GB memory). I have 3 drives attached: The system drive, and two 2GB drives (one is a 4Samsung, the other is a 2 year old WD Green). Both drives
work fine. They were in use before and I ran CrystalDiskMark on them.
Screenshot:
https://onedrive.live.com/redir?resid=D15A2F045B0DB05F!183&authkey=!AIj17nunArs0JMA&v=3&ithint=photo%2cpng

Hi kappa16,
The Get-FileIntegrity cmdlet gets integrity information for a file on a Resilient File System (ReFS) volume.
Make sure the volume is formatted as ReFS. Or you will fail to run this command.
For your question, here is the output of both situations:
Alex Zhao
TechNet Community Support

ERROR: Cannot find file ...

Can anyone help me with this? When I run my .java file, the java executable doesn't seem to be able to locate my .java file. I tried everything but still cannot solve it! Can anyone help me out here???

OK here's what I did. I opened the command prompt, and my file's path is C:\java\a.java+. I typed +cd C:\java+ into the command prompt and then I typed in javac a.java as I was told. The command prompt then gave an output shown below.
+'javac' is not recognized as an internal or external command,+
operable program or batch file.*
I then typed in a.java* and then a prompt window popped out saying, Could not find the main class. The program will now exit.* I then went on to type java class a.java* to the command prompt and then it gave an output shown below.
Exception in thread "main" java.lang.NoClassDefFoundError: class*
+Caused by: java.lang.ClassNotFoundException: class+*
at java.net.URLClassLoader$1.run(Unknown Source)++*
at java.security.AccessController.doPrivileged(Native Method)++*
at java.net.URLClassLoader.findClass(Unknown Source)++*
at java.lang.ClassLoader.loadClass(Unknown Source)++*
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)++*
at java.lang.ClassLoader.loadClass(Unkno*
I then typed in java a.java* and then the command prompt gave an output.
Exception in thread "main" java.lang.NoClassDefFounderror: a/java*
Caused by: java.lang.ClassNotFoundException: a.java*
+ at java.net.URLClassLoader$1.run(Unknown Source)+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at java.net.URLClassLoader.findClass(Unknown Source)+
+ at java.lang.ClassLoader.loadClass(Unknown Source)+
+ at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)+
+ at java.lang.ClassLoader.loadClass(Unknown Source)+
+ at java.lang.ClassLoader.loadClassInternal(Unknown Source)+
OK so my problem is that when I wanted to compile my .java file, java doesn't seem to be able to FIND my .java file and thus it keeps giving errors whereby it couldn't locate my file. I also tried reinstalling Java JDK and JRE but it doesn't seem to do the trick. I followed the instructions stated in he help section on the site [www.java.com|http://www.java.com/], whereby they told me to uninstall the JRE and then reinstalling the JRE portion of Java but the same problem still exists. Can anybody solve this problem whereby Java not being able to locate .java files???
Also here's my MSN & Email address, I want to make this easier for the people who want to help me with this problem.
*['[email protected]'|mailto:'[email protected]']*
*(P.S. Do not spam!!!)*
Edited by: StarJython on Jun 16, 2008 10:01 PM

Runtime Error "Cannot find system in table file"

I need assistance!
I have a Blackberry Curve 8310 and have recently installed Version 4.5
I am trying to setup my synchronization. I have followed the steps to setup my calendar to Outlook 2007. It tells me Congratulations! You have successfully configured the product. However, when I press Finish, I get a Runtime Error "Cannot find system in table file"
I have uninstalled the program and reinstalled it - the same error appears.
Any help would be appreciated!
Solved!
Go to Solution.

FIGURED IT OUT!!!
The following steps, which are posted on the RIM Support will work; however, I had to do it a different way. In Step 1, it states that the ilxolkCompanion.fil is located in C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector path...however, when I searched for this file, it was actually located in C:\Program Files\Blackberry\Connectors\MS Outlook Connector. (This could be because I upgraded from 4.2.2 to 4.5 w/o completing a clean uninstall...not too sure why)
Once I located the file through the command prompt, I unregistered as per the instructions in Step 1. I then followed step 2 exactly word for word...and VOILA!!! I now have Version 4.5 working with MS Outlook 2007
ResolutionIf the Connectors folder is still present in C\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector, follow these steps:
Unregister the old Microsoft Outlook connector ilxolkCompanion.fil.
Open the command prompt.
Navigate to C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector.
Type in the command regsvr32 -u ilxolkCompanion.fil.
In Desktop Manager, Microsoft Outlook will no longer be listed as an available desktop application.
Register the most current Microsoft Outlook connector.
Navigate to C:\Program Files\Research In Motion\BlackBerry\IS71 Connectors\MS Outlook Connector.
Type in the command regsvr32 msoutlookconnector.fil.
In Desktop Manager, Microsoft Outlook will now be registered as an available desktop application.
Once these steps have been completed, configure synchronization again.

None of the links in my TOC or INDEX work. Cannot find file is the error message.

The files are on a networked drive. Win7. FM 8. I've renamed files. Regenerated. Created a new book. Nothing works.
I do have hyphens and underscores in the file names but no other special characters.
Need help urgently.
The error message is:
Cannot find file named
\SOL\Data\TechDocs\DRAFT\Shiva\OperatorManual\096-0461-001C-1.
fm.
Make sure that the file exists.
Note that the TOC and INDEX are listed in the book w/o a path while the body chapter has the entire path (above) listed in the book view.
Thanks

IIRC, FM8 had an issue with a path having more than 5 (or 6?) sub-folders. Try bringing the files up a few levels or create a mapped network drive down to the lower levels.

RoboHelp 10 Compile Error: Cannot find xml definition file Template Error

Does anyone know how to resolve this error? I'm exhausted googling.
I generated Webhelp and got the error below. When I View the Help, nothing displays; IE browser does not open the Help.
Initializing compiler...
Generating WebHelp 5.50 (10.0.0.287)...
Error: Cannot find xml definition file C:\Program Files (x86)\Adobe\Adobe RoboHelp 10\RoboHTML\webhelp5Ext\template_skin\webhelp5skin.xml.
Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.navpane.dhtml
Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.navpane.list
Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.toolbar
Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.minibar
Template Error: can not resolve macro: WT_DS_TOC_ICON_PAGE_REMOTE
Template Error: can not resolve macro: WEBHELP_TEMPLATE.topic
Template Error: can not resolve macro: WEBHELP_TEMPLATE.frame
Processing TOC data...
Processing Glossary data...
Processing Context-sensitive-Help data...
Updating HTML topics...
Finished updating HTML topics in 5 sec(s) : total 431 topic(s).
Processing Full-text-search data...
Finished processing Full-Text-Search data in 41 sec(s)
Applying WebHelp 5.50 Template...
..........................Template Error: can not resolve macro: WT_DS_SEARCHFORM_GO in C:\FuelsManager Primus\Web Application\Projects\FMHelp\Cirrus\whfform.htm
Error: Fail to update Template file whskin_frmset010.htm
Error: Fail to update Template file whskin_frmset01.htm
Error: Fail to update Template file whskin_frmset0.htm
Finished applying Template in 10 sec(s)
Finished compiling WebHelp in 107 sec(s)
Compilation complete.

Why Robo 8 would remove RH10 files is beyond me.
A reinstall of RH is sure to fix it. But if you PM me your email
address, I can send you a copy of the file (might save you a reinstall).
Kind regards,
Willam

Upgrade Plug-ins error (Cannot Open File)

I was working on a document in CS3 as a final thesis for my masters work. I was using a Blurb template in order to export the file for printing. In between working on the file, one afternoon I could no longer open the file and was met with the follwing error:
Cannot Open File
IMAGE.RPLN
IMAGE FILTERS.RPLN
HYPERLINKS.RPLN
"Cannot open "Masters_book dec.indd".
Please upgrade your plug-ins to their latest
versions, or upgrade to the latest version of
Adobe InDesign."
I hadn't changed any other files on my computer or ran any updates. I was simply met with the error when I tried launching the application. After trying to run necessary updates I was still met with the same error message. I downloaded the trial version of CS5 on another machine and tried to open it and was once again met with the above error message. I have a back up of the file that I can use but it still represents a lot of lost work if I have to resort to an old file.

I probably shouldn't dwell, on this, but I can get really worked up over it.
I come from the Cosmos and I can assure you we have sent no "Rays" to your puny Earth Planet today!(*)
Since this concerns a CS3 file and I haven't seen posts of others having the same issue, either with CS3 or with any other version, I have to take it as a One-Time Fluke.
I'm pretty firmly convinced this never happens. There are real problems and even if we only see them once, they are happening hundreds and thousands of times and going unreported and undetected, but they are no less real. In fact, because of the reporting bias towards repeatable problems, they are probably causing added frustration and confusion without being detected or fixed properly. So, IMNSHO, we owe a larger duty to pay attention to so-called "unreproducible" bugs.
(You can imagine how well these conversations with Adobe Support go...)
Of course, in this case, it's probably really hard to find the problem. And since it's effectively an end-of-life'd product that is 3 versions behind the released product and at least 4 versions behind the development product, well, it's hard to lose too much sleep over it.
(*) Yes, I know, this incident would not have been "today." Consider it time dilation.

Spotlight and finder cannot find files as of a certain date. What can be the problem and how to solve?

Spotlight and search field in Outlook on MacBoon cannot find files as of a certain date. What can be the problem and how to solve?

Reinstall on both.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it isthree times faster than wireless.
Restore your iPhone to reinstall iOS. Be sure to do this while connected to your computer and iTunes.
     Tap Settings > General > Reset > Erase all content and settings.

Cannot sync photos-says cannot find file, will not sync

eveytime I try to sync, when it gets to photos, iTunes has an error window with no code that says "Cannot find file, cannot sync" Everthing else backs up and syncs except photos. My husband uses the same mac and he can sync just fine, no errors.

For iPhoto the link said:
If you're syncing from an iPhoto or Aperture album, use these steps to find the iPod Photo Cache folder in the default iPhoto Library or Aperture Library location:
From the Finder, choose Home from the Go menu.
Once there, open the Pictures folder and locate the iPhoto Library file. (For Aperture, this is called Aperture Library.) If you have moved your iPhoto Library or Aperture Library to a different location, go to that location in Finder first.
Control-click the iPhoto Library or Aperture Library file and choose Show Package Contents from the shortcut menu.
In the next window, locate the iPod Photo Cache folder and drag it to the Trash. Important: Do not remove or modify any other file within the library package. Removing or modifying other files may cause data loss.
Close the Finder window.
Are you doing step 3? You can also right click and select Show Package Contents. It works both ways for me. I just tried it.

Xmlreader schema validation error: Cannot find the declaration of element

I have multiple schemas with namespaces but I would like to validate an xml document without namespaces. The schemas all have elementFormDefault="unqualified" in the root element.
I am encountering error below in my validation using xmlreader:
ERROR:
Cannot find the declaration of element 'NewTradenetDeclaration'.
my code is:
xmlReader = XMLReaderFactory.createXMLReader("org.apache.xerces.parsers.SAXParser");
xmlReader.setFeature(VALIDATION_FEATURE_ID, true);
xmlReader.setFeature(SCHEMA_VALIDATION_FEATURE_ID, true);
xmlReader.setFeature(SCHEMA_FULL_CHECKING_FEATURE_ID, true);
xmlReader.setFeature(SCHEMA_NAMESPACE_FEATURE_ID, true);
xmlReader.setProperty(JAXP_SCHEMA_LANGUAGE, XMLConstants.W3C_XML_SCHEMA_NS_URI);
String schemaURI = "NewTradenetDeclaration.xsd";
// ive tried all of the ff but throws the same error
//xmlReader.setProperty(EXTERNAL_SCHEMA_LOCATION, "urn:crimsonlogic:tn:schema:xsd:NewTradenetDeclaration NewTradenetDeclaration.xsd");
//xmlReader.setProperty(EXTERNAL_SCHEMA_LOCATION, schemaURI);
xmlReader.setProperty(JAXP_SCHEMA_SOURCE, schemaURI);
// set entity resolver to resolve xsd locations
MyResolver resolver = new MyResolver();
xmlReader.setEntityResolver(resolver);the entity resolver has:
public InputSource resolveEntity (String publicId, String systemId) {
String filename = "c:/workspace/TXParser/schema/"+ systemId.substring(systemId.lastIndexOf("/")+1);
File f = new File(filename);
InputSource source = null;
try {
source = new InputSource(new FileReader(f));
} catch(Exception e) {
System.out.println("InputSource exception: " + e.getMessage());
return source;
}Help please. Thanks.

I fight with the same error, it is curious that the schema from schemaLocation can not be validated. If i set the schema manually through an attribute it works. What i try to do is overwriting the resolveEntity in the handler to get the schema from another location and validate the xml against the schema specified in the attribute schemaLocation rather than setting it manually :-(

Installation error: Cannot find a J2SE SDK installed at path C:\Program Fi

I am installing latest version of SQL Developer, Release 1.2. I have Sun Java 2 Standard Edition Version 1.5.0 (build 1.5.0_10-b03). When I browse and select the java.exe found it comes up with error: Cannot find a J2SE SDK installed at patch
C:\Program Files\Java\jre1.5.0_10
I am installing the version I downloaded for Windows systems with JDK1.5.
I have tried on two different machines.
Any ideas?

This is going to seem loooong, but comprehensive.
I'd initially always suggest using the bundled
package, since that's supposed to be a tested and
proven combination.You know what, I'm gonna be mighty surprised if you're implying that Oracle hasn't 'tested and proven' the releases at http://www.oracle.com./technology/software/products/sql/index.html other than the first 77 MB download labeled Oracle SQL Developer for Windows... :)
After having problems with a graphics card for
example, installing the latest JDK might be
indicated.Huh?!? Not a clue what you're talkin' 'bout! :S
It's also easy for users who don't know which Java
version to download, or even where to find it! You
guys have proven that: although it's stated you need
.First of all, it says right there on the download page (http://www.oracle.com./technology/software/products/sql/index.html) that:
"JDK 1.5 (JDK 5.0) is required. This is the minimum JDK version required"
And we've "proven that [..] although it's stated you need the JDK, [we]'ve tried running with the JRE" and have NOT been able to run the application. It just presents the user a dialog box to locate the 'SDK' manually and exits gracefully if you try to dismiss it. So, conclusively proven, the JDK (or as SQL Developer puts it, Java SDK) is required- QED.
And given users might have several versions running
on the same machine (I have half a dozen), sqldev
could easily pick up a wrong version.And every JRE installation (atleast all of Sun's) make sure they update the default (via PATH and other required system variables) JRE point to the latest one installed. So if you have anything 1.5+ you're good to go; if not, you've got an incompatile JRE. Doesn't sound that hard to me!
As for being bulky, even without the bundled JDK, it
still is.Ya missed the point. Developers are making Java applications bulkier by including the JRE/JDK with their distributions. A SQL Developer release sans JDK is about 46 MB; with JDK that climbs to 77 MB (sizes quoted from download page linked above).
Imagine what happens when you have, besides SQL Developer (JDK 1.5 included), some-cool-java-app that also includes the JRE/JDK it was built on; and then another-java-app that also includes a JRE/JDK... I bet JDeveloper also comes with a JDK bundled in. So, now you have FOUR copies of JRE/JDK (aside from the "have half a dozen" that probably installed themselves via Java Update Checker)!
Here's the big picture, the savings in disk space would only be the beginning of your benefits. Here's a few others:
- Class Data Sharing (http://java.sun.com/javase/6/docs/technotes/guides/vm/class-data-sharing.html) introduced in Java SE 5.0 provides for storing definitions of commonly used classes in a representation closer to machine code, even closer than bytecode, this reducing load and startup time. Plus all VM's launced using that particular distribution get to share the cache- Performace+ !!
Running each app offa' it's own VM just causes multiple caches to be loaded. You just multiplied your losses! :(
- Sun is currently working on a way to have applications simply inject into a running JVM. That way, there is no load and startup time for the JVM, just the time to load you app classes. Using different distros would completely defeat this!
(The reason why this feature isn't out yet is because they're still trying to make it possible to specify hitherto VM configurations like security and logging as application configurations. Then there's also the issue of setting up class loading boundaries between applications.
You say you don't have to bring over the VB runtime
for each app? I remember in the 90's doing it all the
time. Of course, being MS, now that's not necessary
anymore, since it's "magical" Windows. I don't have
any machine from Sun, but for sure they've got Java
bundled with it, right?I don't believe you had to do that since VB 5; and that's because MS realized that they messed up on this very point upto then! Sun worked the simple solution to that into their deployment strategy- install only ONE runtime and run all apps off that. As for you're half-a-dozen, I think you can safely uninstall the five older versions; because, even today, people are running apps developed using JDK1.1 on Java SE 6.0!
Again, I find the most logical difference between JRE
and JDK being the debugger. As you say it yourself:
JRE for end-users, who don't need to do any
debugging.
Now, sqldev is not just a table browser, but also for
debugging PL/SQL. 1 + 1 = 2.I think it's a little naive to differentiate between the JRE and JDK on just the debugger! Aside from the obvious inclusion of a compiler, the JDK has several other tools for monitoring/managing the heap, threads and logging on the fly. There's also the Doclet API and Sun's javadoc implementation, dev interfaces for instrumenting the VM, native interfaces, ...
And I reiterate, we're talkin' PL/SQL developers here. Why would I want to give a PL/SQL developer a Java Development Kit?!? ;|
Nevertheless, as said in the other thread, if the
team discloses how to circumvent the SDK check at
startup, you can go ahead and use the JRE. In any
case, you'd have to agree that won't work as
out-of-the-box solution...You're right, it won't work like a standard Windows OOTB app. But, it WILL work as a Java OOTB that only mandates that there be a JRE available; just like the scores of Java apps out there- from tiny little Pong clones to large IDE's like NetBeans.
BTW, don't even think about quoting Websphere/Rational/Eclipse as counter-arguments. They are the biggest offenders as far as this issue goes. And jikes is an abomination, a curse Sun must carry as a result to opening the VM Spec. But, I digress...

Configure: error: Cannot find php-config

After security update 2008-002 for Leopard, the PHP module builder stops, because the PHP version running on the machine doesn't match the header files from the PHP-developer part. More info see: http://www.naquah.net/blog/dennis/2008/03/20/how-to-get-eaccelerator-working-aga in-after-installing-security-update-2008-0#comment-50
After editing /usr/bin/php-config
Change
version="5.2.4" to version="5.2.5" and
vernum="50204" to vernum="50205"
and /usr/include/php/main/php_version.h
Change
#define PHPRELEASEVERSION 4 to #define PHPRELEASEVERSION 5
#define PHP_VERSION "5.2.4" to #define PHP_VERSION "5.2.5" and
#define PHPVERSIONID 50204 to #define PHPVERSIONID 50205
the ./configure command stops with a:
configure: error: Cannot find php-config. Please use --with-php-config=PATH
even when explicitly specifying the php-config location, the ./configure --with-php-config=/usr/bin/php-config command still throws an identical error.
The file is there, accessible and not empty:
$ ls -l /usr/bin/php-config
-r-xr-xr-x 1 root wheel 3031 22 mrt 21:44 /usr/bin/php-config
$ head /usr/bin/php-config
#! /bin/sh
SED="/usr/bin/sed"
prefix="/usr"
exec_prefix="${prefix}"
version="5.2.5"
vernum="50205"
include_dir="${prefix}/include/php"
includes="-I$include_dir -I$include_dir/main -I$include_dir/TSRM -I$include_dir/Zend -I$include_dir/ext -I$include_dir/ext/date/lib"
ldflags=" -L/usr/lib/mysql"
Re installing Xcode 3.0 didn't solve the problem.
What could be done to repair the (php) configure command, to allow me to build php modules again?

On my installation I have both NVidia and mesa drivers installed, thus two sets of GL headers/libraries.
For Mesa: SUNWxorg-mesa
Nvidia: NVDAgraphics
If you want to develop on your system you may want to install much more than just GL headers.
Its a pity that Solaris packaging is not really flexible, so you better do a full install indeed...
regards,
__Fedor.

Logging Error Message in Console [Servlet Error]-[Cannot find FacesContex]

Hi,
I am using Web Application with JSF . but when i log in into the web appl everthing is fine but in back end i mean the console of RAD Tool having some logging Error message:
SRVE0026E: [Servlet Error]-[Cannot find FacesContext]: javax.servlet.jsp.JspException: Cannot find FacesContext
at javax.faces.webapp.UIComponentTag.doStartTag(UIComponentTag.java(Compiled Code))
at com.sun.faces.taglib.jsf_core.ViewTag.doStartTag(ViewTag.java(Compiled Code))
at org.apache.jsp._index._jspService(_index.java:86)
at com.ibm.ws.webcontainer.jsp.runtime.HttpJspBase.service(HttpJspBase.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.ibm.ws.webcontainer.jsp.servlet.JspServlet$JspServletWrapper.service(JspServlet.java(Compiled Code))
at com.ibm.ws.webcontainer.jsp.servlet.JspServlet.serviceJspFile(JspServlet.java(Compiled Code))
at com.ibm.ws.webcontainer.jsp.servlet.JspServlet.service(JspServlet.java(Compiled Code))
So could you please help me find out the solution for this :
While i am using the code in jsp page:
<%@taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@taglib uri="http://www.ibm.com/jsf/html_extended" prefix="hx"%>
<%@taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<HTML>
<HEAD>
<META http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<META http-equiv="Content-Style-Type" content="text/css">
<TITLE>Web App
     <f:view>
          <h:outputText value="#{dataInfo.info}"/>
     </f:view>
</TITLE>
Suggest me the solution:
Regards,
Prabhat

This usually means that you call the JSF page the wrong way. Try something like http://hostname:port/servletcontextroot/faces/page.jspx
--olaf

Oracle 11gR1 on Windows Xp Error Cannot find J2SE SDK installed at path

When I type in path for java.exe in SQL Dev. , I get error 'Cannot find J2SE SDK installed at path: C:\Program Files\Java\jre6.' when I entered the path C:\Program Files\Java\jre6\bin\java. What is the reason for this error? How can I correct it? Database installation said it was successful

SQL Developer needs the Java JDK not the JRE to operate successfully. Your path looks like a path to the JRE. There is a windows download that comes complete with a Java Developer kit.
regards
Niall

Configure: error: Cannot find GLX header

I install gtkglext from its source code and get an error after the 'configure' command.
bash-3.00$ ./configure
checking GL/glx.h usability... no
checking GL/glx.h presence... no
checking for GL/glx.h... no
configure: error: Cannot find GLX header
I guess the OpenGL files are not installed during Solaris 10 installation. Could someone tell me where can I get opengl files? Are they in the Solaris 10 installation disks? How to install opengl files?

On my installation I have both NVidia and mesa drivers installed, thus two sets of GL headers/libraries.
For Mesa: SUNWxorg-mesa
Nvidia: NVDAgraphics
If you want to develop on your system you may want to install much more than just GL headers.
Its a pity that Solaris packaging is not really flexible, so you better do a full install indeed...
regards,
__Fedor.

Cfthread Error, Cannot Find File "taglib.cftId"

Similar Messages

Maybe you are looking for