CG37 - Error: No specification is assigned to the item material

Hello,
I have a problem in transaction CG37.
I have created a BOM for a material A with the component B.
The materials have been assigned to specifications (REAL_SUB) in EHS.
However, when I start CG37 to execute a BOM to BOS transfer I get the following error message:
"No specification is assigned to the item material B" (CM_BOMBOS037) even though the material is assigned to a specification.
Your help concerning this problem would be much appreciated.
Robert
Edited by: Robert LOHMANN on Sep 28, 2011 6:04 PM

Hello robert
we are not using BOMBOS. But in my opinion the error message indicates that a "BOM" position does not have a "corresponding" REAL_SUB. As you may be know: you need ot make a "configuratoin" of the BOMBOS interface. In this you indicate which materials of which type should be analysed if or if not a REAL_SUb is there and if no REAL_SUB is there to create the REAL_SUB on the "fly".
Refer may be to the "best practisese" of EHS or take a look here: http://help.sap.com/erp2005_ehp_05/helpdata/en/a7/288aa30a6c11d28a220000e829fbbd/frameset.htm
chapter Bill of Material Transfer
Edited by: Christoph Bergemann on Sep 28, 2011 8:12 PM
Edited by: Christoph Bergemann on Sep 28, 2011 8:13 PM

Similar Messages

  • No specification is assigned to the material in the BOM item

    hello
    when I want to create or modify certains BOM (cs02), i have this error message.
    It is a warning, but nothing is done in the BOM.
    Where does this error come from ?
    And how to solve it ?
    Thans

    see below the error message :
    Item material 421Z2811-2001 is not assigned to a specification
        Message no. CM_BOMBOS052
    Diagnosis
        No specification is assigned to the material in the BOM item
        00125813-0240.
    System Response
        The system cannot create a composition for the bill of material since
        there is no material-specification assignment.
    Procedure
        Ensure that the items in the bill of material are assigned to one
        specification in each case before the composition is generated.
        Otherwise errors occur during generation and you have to repeat the
        process.
    I Don't know, what is a spécification in a BOM ? Never we have used a "spécification"
    @+

  • TS2776 I can't sync my iPhone movies.  Have 3 movies but I get an error message that says some of the items in the iTunes library weren not copies because they could not be found.  What do I do?

    I can't sync my iPhone movies.  I have 3 movies but now I am getting an error message that says some of the items in the iTunes library were not copied becuase they could not be found.  Two of the movies are from the iTunes store and one is froma movie recently purchased.

    Had the same issue, found a solution.
    The iTunes Store open in my iTunes was U.S. and the apps on my iPad are from Switzerland's store. So I went to iTunes Store in iTunes, then opened the App Store tab and at the bottom right of this tab clicked the round american Flag button. Changed to Switzerland, went to Store>Authorize this computer (which it did sucessfully) and after that syncronization worked great. Hope this helps

  • Error - No date profile assigned to the transaction/item category

    Dear Expterts,
    I am getting the error while trying to create a complaint (In-house repair) transaction.
    No date profile assigned to the transaction/item category
    Message no. CRM_BILLING015
    System Response
    Billing dates cannot be maintained.
    Procedure
    Assign a date profile to the transaction type or item category in Customizing.
    Make sure that this date profile contains all the necessary date types:
    BILL_DATE
    INVCR_DATE
    date profiles are assigned to both transaction type and Item category. mentioned date rules are in place in standard configuration itself. still the problem persist.
    Please help me to resolve the issue. Your help will be highly appreciated.
    Best regards
    Raghu ram

    Hi Pepe,
    Thanks for the response, these transaction types are already there. and 'Today' date rules are assigned to both date types.
    Still the problem exist.
    Best regards,
    Raghu ram

  • Error message: CO account assigned to the wrong company code

    Hello,
    I've had the following error message in a report: "The CO account assignment object belongs to company code XXXX, not YYYY." What object is this? How can I change the assignment of the object to the company code? Which transactions should I use?
    Please help me.
    Thank you all,
    Tatiana

    Hi,
    CO assignment could be through cost centre, I/O, WBS, cost object etc. Check your document and go to the master data of the relevant object. Keep in mind, that if there are postings on the object done already, you cannot change the assignment to company code, but have to create a new object (or use another one in the document, of course).
    Regards,
    Eli

  • IC error: "No root trees assigned to the profile found"

    problem in interaction center - > user gets error message
    "No root trees assigned to the profile found" when clicks on
    action box tab
    Could you please tell me what causes this issue?
    Thank you very much!

    Hi Pepe,
    Thanks for the response, these transaction types are already there. and 'Today' date rules are assigned to both date types.
    Still the problem exist.
    Best regards,
    Raghu ram

  • Error message: CO account assignment to the wrong company code

    Hello,
    I've had the following error message in a report: "The CO account assignment object belongs to company code XXXX, not YYYY." What object is this? How can I change the assignment of the object to the company code? Which transactions should I use?
    Please help me.
    Thank you all,
    Tatiana

    HI
    i think the error message number KI100 if message is KI100 you can supress error message by using transaction code OBA5
    if error message is different please let me know the error message number
    Thanks & Regards
    Phaneendra

  • Re:Error while updating Warehouse List for the items in DTW..!!!

    Dear SAP Members,
    We have transferred the items through DTW but while updating the warehouse list for the items.i got a error message like this:
    No.     Status                  Key               Reason
    1         Updatefailed       ItemCode       cannot find this object in B1-application defined or object defined error65171
    How to resolve this issue.It shows error for 600 records.It is very dfficult to enter manually.Help me on this issue.
    With Regards,
    Revathy

    Hi Revathy,
    I suggest you use SQL Server Management Studio. I am not sure which DTW template you are using. All templatesl map to certain tables in B1. You should perfform a select on that table in SQL Management Studio.
    It seems like the column that connects DTW Template in excel to the column in B1 Table do not match. Usually you may have incremental numbers in starting sequence in DTW Template, however, it is different in B1. You may need to copy the numbers over to DTW Template.
    If you want to do it automatically, you can achieve it through mapping or you could write your own little program that takes data from B1 tables and replace the one in Excel in that column.
    If it is one time effort you may just map them manually.
    I hope I am making sense to you.
    If you want us to try it out, give the name of the template, the content in the template may be few lines.

  • Error Message with Itunes "Some of the items in the Itunes Library...

    Itunes gives me the following message when I hook up my Ipod.
    "Some of the items in the Itunes library were not copied to teh Ipod because they could not be found"
    For some reason my Ipod gave me this message. I went through and recopied my songs from the file on my computer and deleted the duplicates that had issues. Everything works fine for awhile. Then I hook it up again and get the error message again. I am not sure what to do now. Any ideas? Thanks for any help you can give me.

    I got this message regarding my iTunes purchases when I got a new computer. I had to go into the Store/Authorize Computer... menu selection in iTunes and provide my iTunes Store ID and password. Don't know if this applies to you, but it fixed my problem. Even if you aren't on a new computer you might want to give it a try.

  • Purchase order form display the BOM of the item material

    Dear :
      When i print or preview the purchase order in ME23n,I want to display all of the  components of  material which every item used.(sap standard output type is NEU,form is MEDRUCK)
      The components can be displayed when we click the button of "Components" in the right "Material Data" ITem Tcode:ME23N.
      Firstly ,i have to get the BOM of the material through the function:CS_BOM_EXPL_MAT_V2.But NOW,i found that ,In ME22N ,the operator would change the components and saved the order,
       so, my way to display the component in the print form is wrong!:(
       anyone give me some advice?
       Thanks.

    Shao,
    I guess you will have to design your SMART Form according to your requirments and configure this SMART Form to be called from the output conditions of the PO.
    In this SMART Form, you will have to include the logic of exploding the BOM and showing the components as well.
    I don't its a standard functionality.
    Regards,
    Ravi
    Note : Please reward the helpful posts.

  • Vendor assignment for the pipeline material Ex.Water ,power

    *Dear All ,*
    *Can you please help me ?*
    *How to assign the vendor to pipe line materials like water ,power,oil. etc.*

    Dear,
    Create source list ME01 maintain vendor here if vendors are multiple.
    Create Info record ME11for vendor and material combination
    Regards,
    R.Brahmankar

  • Wrong business area assigned to the company code

    Hi All ,
    I am getting error " Wrong business area assigned to the company code  " while posting a document in F- 02
    please advise

    Dear Balasubramaniyan,
    You can supress the field Business area field in Field status Groups.
    For this follow the following steps
    Please check TCode OBC4 for field status variants
    > Goto G001 (General) Field status group
    >Additional Account Assignment
    > Click supress in front of business area.
    In that case, F-02 will not even ask for business area.
    Also check whether Business area FS is ticked in front of your company code in TCode OB65
    You may also refer to the following thread
    How to assign business area to company code?
    I hope this solves your query.
    Thanks & Regards
    Saurabh
    Edited by: Saurabh Khandelwal on Nov 8, 2011 1:53 PM

  • OAK3 error message - Specifications for the mean value methods incorrectly

    Hello experts,
    After golive of sap ECC system of our client, when the auditors check the consistency of depreciaion areas in transaction OAK3, the error message is appearing under the depreciation area 01 as "Specifications for the mean value methods incorrectly defined". Can anybody throw some light on how to encounter this error message?
    Thanks

    Hi,
    1) Usually, the reason why the error occurs is that you have no area defined in the chart of depreciation.
    2) Also please check the attached note 847289.     
    3) Please also run OIB5 and check if capitalization version is assigned to depreciation area 01                                            
    If you use capitalization versions it is necessary to have a depreciation area with area type 07 (Cost-acc. valuation) which     
    get the whole amounts.                                                                               
    The depreciation area which takes the values to 100 % must have the following features:                                                 
    => The currency of the depreciation area should have the currency of the controlling area                                          
    => The depreciation area should have the depreciation area type "07 Cost-acc. valuation"                                         
    => The area should not have a capitalization version       
    regards Bernhard

  • SAP MII 14.0 SP5 Patch 11 - Error has occurred while processing data stream Dynamic Query role is not assigned to the Data Server

    Hello All,
    We are using a two tier architecture.
    Our Corp server calls the refinery server.
    Our CORP MII server uses user id abc_user to connect to the refinery data server.
    The user id abc_user has the SAP_xMII_Dynamic_Query role.
    The data server also has the checkbox for allow dynamic query enabled.
    But we are still getting the following error
    Error has occurred while processing data stream
    Dynamic Query role is not assigned to the Data Server; Use query template
    Once we add the SAP_xMII_Dynamic_Query role to the data server everything works fine. Is this feature by design ?
    Thanks,
    Kiran

    Thanks Anushree !!
    I thought that just adding the role to the user and enabling the dynamic query checkbox on the data server should work.
    But we even needed to add the role to the data server.
    Thanks,
    Kiran

  • Assign Task to a specific user based on the value of DDL from the form

    Hello,
    Can any one please advise me on how to assign a task to a specific user based on the value of the drop down list from the form. E.g. user fills the form and before they submit the form they have to select one of the name from the drop down list so the form can go to that person for approval.
    Thanks in advance,
    Han

    I got it works now by using the xpath expression (in workbench) to assign to the selected user from the DDL in the form.

Maybe you are looking for

  • Backend Connection between Portal and SAP R/3

    Dear All, I am new to Enterprise Portal. Enterprise Portal 6.0 was running at our company with backend SAP R/3 4.6C connected to it. Recently we have migrated our Backend SAP: R/3 Servers to AIX/Oracle platform. The server landscape is running on two

  • How can i stop icloud from sending me a e-mail everytime I write or update a note on my iphone???

    Every time I make a new note, or even when I simply update an existing note (this can be a minor change such as one letter) an email is sent to my Gmail. It never shows as an unread new email in my inbox, but it's there, in my "All mail" folder. I no

  • Sales Order in the Requirements List

    Hello everyone, I have a problem with the sales orders which do not appear in TX-MD04 (Requirements List) once they have been partially delivered. In other words, the sales order appear in TX-MD04 before posting the goods issue, but it doesn´t even i

  • BI Answers Subtotals in Hierarchy Column

    Hello, I am building an operational statement using BI Answers. However, I'm having trouble finding some functionality that is required. 1. Subtotal for each level of the hierarchy - I can only find grand total - no option for subtotals 2. When the g

  • Slow loading site

    I built my website with iWeb and it's horribly slow to load using the iPad and I just gave up with the Nook and the iPod Touch. None of the files are very big. There are some image files over 100k but the rest are under 100k each. Any suggestions as