Cg42.. error occured in edit documnet

Hi
I have got error .. when working on cg42... select the templte and click on edit document button..
system give an error like....
Error occurred while assigning the document template wwilayt.dot:
Message no. CM_REPORT_TEMPLATE421
System Response
The program Windows Wordprocessor Integration (WWI) cannot be started.
Procedure
Contact your system administrator.
Procedure for System Administration
Check whether WWI is installed correctly. The following registry entry must exist for the document template wwilayt.dot:
HKEY_CLASSES_ROOT/WWIDOCUMENT/InstallDir
pls..could anyboy provide solution for this error
regards
sesidhar

Hello Sesidhar
Did you maintained templates under Microsoft Word under word options -
> Advanced -
> File Locations -
> User Templates -
> Modify----
> Location where WWI layout is present
Thanks and Regards
Jayakumar

Similar Messages

WIJ20005 error occurred while editing the WebI document

Hello Everyone,
An error occurred while editing the WebIntelligence document.
The error don't occur when you run again.
Do you know the cause of this problem?
Please give me advice how to investigate.
Error message is as follows:
The current request has returned corrupted data. Contact your administrator (ERR WIJ 20005)
Version: 12.4.4.1557
Application server:
http://xxx.xxx.xxx.xxx:80/AnalyticalReporting/cdzisapi.wis
Stack trace:
java.lang.NullPointerException
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabSpaceAllocator.a(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabSpaceAllocator.reArrange(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.ensureCurrentRects(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabbedPaneScrollLayout.calculateTabRects(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabbedPaneLayout.calculateLayoutInfo(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.ensureCurrentLayout(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.a(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.access$1900(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$f_.componentAdded(Unknouwn Source)
at java.awt.Container.processContainerEvent(Unknouwn Source)
at java.awt.Container.processEvent(Unknouwn Source)
at java.awt.Component.dispatchEventImpl(Unknouwn Source)
at java.awt.Container.dispatchEventImpl(Unknouwn Source)
at java.awt.Component.dispatchEvent(Unknouwn Source)
at java.awt.Container.addImple(Unknouwn Source)
at javax.swing.JTabbedPane.insertTab(Unknouwn Source)
at com.jidesoft.swing.JideTabbedPane.insertTab(Unknouwn Source)
at javax.swing.JTabbedPane.addTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTab.createUniversTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTab.init(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTabManager.addQueryTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTabManager.updateWithDP(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryPanel.createQueryTabs(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryPanel.load(Unknouwn Source)
at com.businessobjects.wp.tc.TCMain.initClient2(Unknouwn Source)
at com.businessobjects.wp.tc.TCMain.initClient(Unknouwn Source)
at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknouwn Source)
at java.lang.Therad.run(Unknouwn Source)
Environment:
[Server]
- Windows 2008 R2 Enterprise
- BOXI3.1 FP4.4 (IIS)
[Client]
- Windows7 SP1
- IE8
- JRE6 Update21
Regards,
Mayumi

Hi, Yuvraj
Thank you for advice.
>What is the default editing tool set in Prefererences --> WebIntelligence?
>Do you get issue with Interactive mode?
>
>If Advanced mode, have you tried uninstalling and re-installing Java
>and check?
It's Advanced mode.
This error occur sometimes.
And if you re-run after an error occurs, the error does not occur.
So, I guess this error has affected the Java cache file, not the Java software.
How do I check what Java cache is corrupted.
>How many reports are giving this issue?
This error occurs in various reports, but I din't know the number of reports.
>Is this issue coming on all machines or single machine?
This error has occurred in several machine.
>Do you face a similar issue when using Webi Rich Client?
This error occur sometimes, and I usually not use Webi Rich Client.
Try to check, but be difficult.
Regards,
Mayumi

Error 1935 - Adobe Reader (11) - An error occurred during the installation of assembly component - Windows 7

NOT RESOLVED
It seems to be a problem with my windows installation. I will re-install at a later date since installing PDF viewing programs the only issue.
Problem:
While installing Adobe Reader XI using the install_reader11_en_mssd_aaa_aih.exe from Adobe Reader Install for all versions and AdbeRdr11000_en_US.msi from a forum post on here. Error 1935 occurs using both installers and causes the setup to fail and initiate rollback.
Additional information:
In Programs & Features list there is no adobe reader as you can see:
This is pretty much a clean install of windows on which I have installed: Adobe Flash Player (16), Steam + some games, Chrome, Skype and some Visual C++ Redistributables, .NET Framwork, Drivers for GPU, CPU, Motherboard and USB devices.
Error:
Error 1935. An error occurred during the installation of assembly component
{B708EB72-AA82-3EB7-8BB0-D845BA35C93D}.
HRESULT: 0x80070308
System:
Windows 7 x64 - installed on a SSD.
Motherboard: ASRock Z97 Extreme 4
GPU: Gigabtye - G1 Gaming GTX 970
CPU: Intel Core - i7 4770K @4.00 GHz
RAM: 16GB Kingston Hyper X (8x2)
Steps taken:
1. I have cleared the transaction log using command prompt with the following command:
fsutil resource setautoreset true C:\
Restarting the computer and trying to install Adobe Reader 11 results in the same error.
2. Restarting the computer, disabling Malwarebytes Anti-Malware and installing Adobe Reader 11 results in the same error.
3. Chrome has "allow all sites to run JavaScript" checked.
Thanks
Edit:
I have attempted to install an earlier version (10.1.4) of Adobe Reader - Same error occurs.
Edit 2:
I'm going to look for some alternatives for the mean time
Edit 2.1:
These alternative programs are failing to install as well. Multiple errors, I now assume the issue is with my windows installation.

Hi Kanker ,
Please refer to the following link and see if it helps.
https://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html
Let us know with your response .
Stay well.
Regards
Sukrit Dhingra

An error occurred while downloading a larger version of this photo for editing. Please try again later.

I've moved to photos from iphoto and for a while all was good. And quite exciting. My entire 15k photos have migrated and are available on all my devices.
Suddenly, I get this warning when I select or try to edit a photo: Cant Download Photo: An error occurred while downloading a larger version of this photo for editing. Please try again later.
There is an exclamation mark and a warning triangle on the picture. I am only able to test on my ibook as my Imac is out of action.
If I log in to icloud in Safari, I can down load the full sized image no problem. Any one got any ideas?

Well stone me, it's started working. Nothing changed on my side..... go figure.

The operation can't be completed because an unexped error occurred (error code-50). This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive. Then this morning I can't open my project file. What to do?

Message: The operation can't be completed because an unexped error occurred (error code-50).
This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive.
Then this morning I can't open my project file. I get this message: The project appears to be damaged, it cannot be opened.
What should I do!??
I have moved my project onto 2 different external hard-drives now.

Hi There,
After looking around for this error, it seems to be related to OS, we would recommend you to contact Apple support for this.
Thanks,
Atul Saini

When attempting to edit a project in the PWA I receive the error: 'An error occurred while opening your project. Give us a few minutes and try again...' Project Server 2013

Hello,
I am hoping someone can assist with the error we are encountering when trying to edit a project from the PWA in Project Server 2013. I can click on the project name and go to the detail page and I can
click and see the schedule. However, if I click on a task in the schedule and attempt to edit it, I receive the following error:
'An error occurred while opening your project. Give us a few minutes and try again. If this happens again, contact your administrator.'
At this point I must click cancel twice to get rid of the error pop-up message. At this point, I am no longer able to look
at the schedule of the project either. Can someone assist with this issue?
Thanks

Hi antonio,
In addition to Phani's advice, which version of IE are you using?
Can you reproduce the issue on another mahcine and with another browser?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

KM Document: edit locally - error occured "Operation Failed"

Hi everyone!
I am runnig SAP NetWeaver Portal 7.0 with MS Internet Explorer 7.0.
I am trying to edit documents locally from the KM. Unfortunately it doesn´t work. Error occured "Operation Failed".
I think all ActivX settings in the web browser are corecctly configured. I don´t think that there are problems with permissions of the document because it doesn´t work with personal documents too.
Could the problem depend on MIME Type settings?
What can i do to solve the problem?
Looking forward for your helb and answers
Dominik

Hi Dominik,
Open the Config tool and check if you this java parameters set for each server node:
-Djava.io.tmpdir=
if not, create a directory and add this parameters to each server node .
After that, you should restart the J2ee server.
Hope this help.
Best regards,
José

Error occurred while trying to refresh edit panel "SeqEdit.ba"

I've been working on a TestStand project for a while (my first) and lately I get the following error just by clicking on a different step (and any step thereafter, even the one I was previously on):
Error occurred while trying to refresh edit panel "SeqEdit.ba":
Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
Closing TS seems to temporarily clear it out, but it will come back after a while.
Can anybody help me figure out what this is?
Thanks!

Here are my answers to the last two posts.
When and what were you doing when this error first appeared?
I'm just developing an automated test, so there's a lot of going back and forth between different subsequences filling in gaps as I go.
Does this error cause your application to crash or hang?
Once it appears, it just continues to appear each and every time I click a different step. I can still develop, but it sure is a pain. It's faster to restart TestStand so it doesn't pop up again (hopefully).
When you said "closing TS seems to temporarily clear it out, but it will come back after a while", could you quantify the amount of time it would take this error to occur again?
I haven't timed it, but it seems to take several hours. I would suspect more that it's based on the number of times I'm clicking different VIs, but I have no hard evidence.
Your error may be due to a registry error. If that is the case, I would recommend backing up your project first and then try to repair the software. You can accomplish the repair by going into Add and Remove Software from Control Panel, selecting National Instruments in the program list, choose TestStand and click on Repair. You will need to have the install CD for this.
Ah, my favorite suggestion...
Do the VIs specified in a LV steps take a long time to load when you click on the LV steps?
I'm not sure what a long time to load is. The first time LabVIEW opens, it takes a while (~30 seconds). After that, the steps typically open in about a second. I sure wish I had an SSD.
Does the error first occur when you clicking on a different LV step or the step is calling a different type of module?
I'm working exclusively with the LabVIEW adapter and the built-in steps: mainly Wait, Additional Results, If Statements, and For Loops.
Do the VIs have cluster parameters? Yes.
Are the clusters expanded when you select a different step? I had noticed that sometimes they are open and other times they aren't any more. I tried just now and after expanding a few, they all seemed to be expanded. Then I went to another subsequence that makes some of the same VI calls and they were open to begin with, then not (~5-10 VIs clicked on). I went back to the first subsequence and they were no longer open. That's interesting, but what are you looking for here?
Does the the error occur when you are using the LabVIEW Run-Time or LabVIEW Development System?
I am using the LabVIEW Professional Development System with the version indicated in my first post.
Are you running any sequences when the error occurs?
I typically run the sequence several times when debugging to make sure that the DUT responds the way I want it to. But the error has only occurred when I'm developing while clicking on a different VI after some undefined amount of time (or number of clicks).
Is it possible for you to post the sequence with some of the VIs that reproduce the problem? The VI block diagrams can be empty. I would like to see what type of controls you are using. It's a decently large application so I'm not sure you want all my code and I'm not sure I'd be able to hand it over either. (DoD contract and such.) I have defined a few (3 or 4) strict type def controls that are passed as clusters within TestStand. Other than that, most of my calls are to bench-top instruments (SigGen, SpecAn, power supplies) and a PXI switch. The other is through an RS485 connection to talk to the DUT.
One other note: This error hasn't occurred since I posted (of course, right?), but I also haven't done as much back and forth clicking of VIs. I have a hunch that it was related to the sheer number of back and forth clicks between different VIs when I was trying to get the values to be uniform among similar calls when I was setting everything up (similar parameter names in subsequences created from custom data types). I hope that helps.
Thanks!

There was an error while copying to Clipboard. An internal error occurred.

Hello
I'm running a Citrix Presentation Server 4.5 environment, based on Windows Server2003 and providing Adobe Reader as a published application (this issue appears with Adobe Reader 7 and Adobe Reader 8 equally).
Sometimes when trying to copy test from a pdf document, the error message "There was an error while copying to Clipboard. An internal error occurred." appears. The selected text is still copied to the clipboard, so the message seems to be more of a warning, but it's confusing for the end-users. This happens equally when copying via 'Ctrl-C' or with the mouse (right-click & copy).
It is not a problem with the document itself since sometimes the error appears and sometimes not on the same document. This happens for all documents I've tried so far.
Additional information: On the servers also MS Office 2003 SP3 is installed. I have the feeling that it may be an interference with the Office Clipboard, but I can't put my finger on it...
Please, has anyone found a solution for this?
Thanks
Andy

in windows 7
start-control panel-uninstall programs
uninstall the "Skype Click to Call", this will uninstall addins from ie, firefox, you dont have to uninstall skype.
in ie and firefox you can disable addons but can not uninstall them using ie or firefox interface, when you uninstall Skype Click to Call, it will remove it from all added browsers.
This works me now.
Edit 1:
Unfortunately skype trick does not work.
I recently switched to windows 8 and reliazed that there is no copy error any more.
Edit2:
This error maybe caused by Babylon dictionary which has an Adobe Acrobat or Reader addon which captures the text from pdf documnet when ctrl+right mouse click. This feature is enabled when it is copied to" C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\plug_ins " or "C:\Program Files (x86)\Adobe\Reader 9.0\Reader\plug_ins " directory, so if it is copied such copying error appeared, if not copied it does not appear. Baylon dictionary addin is installed when you install babylon dictionary software, and it is here " C:\Program Files (x86)\Babylon\Babylon-Pro\Utils ", its name is " BabylonRPI.api "
Edit3:06-April-2013
My experience is that Babylon Dictionary was causing this error. With babylon version 10 acrobat does not give that kind of error anymore, on windows 7 x64, but previous version leftover files may cause this error again even if you remove previous versions and install version 10. With a clean install of windows 7 x64 with babylon dictionary version 10 there is no error anymore.Uninstalling previous versions of Babylon using third party uninstalling software like Revo or Uninstall Tool may help without reinstalling Windows.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

The project could not be prepared for publishing because an error occurred.

I have just loaded iLife 09 on my MAC. I've edited a movie and now want to export it, put it in iTunes, whatever I can do to move it beyond my laptop. No matter what option I choose under Share I get the same error message, "The project could not be prepared for publishing because an error occurred. (-2009)". I can find the error message online, but not the (-2009) error code. I'm also a longtime PC person who has just switched to a MAC. Can anyone help?

I also am having the exact same problem. iMovie '09. I have tried changing permissions on all sharing folders, exporting to desktop, sharing to iTunes in all size files - and yet still get "Unable to prepare project for publishing. error (-2009).
Mac OSX version 10.6.2 Snow Leopard

How can you get your music synced from iTunes to your iPod when a window pop ups on the screen saying"The iPod "Edward's iPod" cannot be synced. An unknown error occured (13019))?

I had 429 songs already on my iPod Touch. When I was in the process of syncing a song from my iTunes Library on to my iPod, a window popped up on the screen saying, ""The iPod "Edward's iPod" cannot be synced. An unknown error occured (13019)). I click "Device" on my iTunes Library to make sure the song was in my iPod. It showed the song that was recently synced now listed under "Device", but when I physically looked for the song on my iPod Touch, it does not appear on there at all. It all started when I decided to put a Playlist I created in the iTunes Library and transferred it on to my iPod. Do you know why it may affected my syncing process and is there any way where I could get the syncing function back to normal so that I can continue adding songs on my iPod? Thank you for listening. P.S. My iPod iOS version is 4.3.5.
Message was edited by: edwardwashere

Try here:
iTunes: Error 13019 during sync

RC-00118: Error occurred during creation of database

adcrdb.sh started at Mon Nov 14 16:16:13 EAT 2011
The environment settings are as follows ...
ORACLE_HOME : /u04/d01/tech_st/11.2.0
ORACLE_SID : JCLONE
TWO_TASK :
PATH : /usr/bin:/u04/d01/tech_st/11.2.0/bin:/usr/bin:/usr/sbin:/u0 4/d01/tech_st/11.2.0/jdk/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/u04/ d01/tech_st/11.2.0/appsutil/clone/bin/../jre/jre/bin:/usr/lib/qt-3.3/bin:/usr/ke rberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbi n:/usr/bin:/usr/X11R6/bin:/root/bin:.
LD_LIBRARY_PATH : /u04/d01/tech_st/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib :/u04/d01/tech_st/11.2.0/ctx/lib
Executable : /u04/d01/tech_st/11.2.0/bin/sqlplus
The log information will be written to
/u04/d01/tech_st/11.2.0/appsutil/log/JCLONE_oracle/adcrdb_JCLONE.txt
Creating the control file for JCLONE_oracle database ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:13 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
Database mounted.
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01119: error in creating database file
'/u04/d01/tech_st/11.2.0/dbs/MISSING00015'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4754
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:32 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : oracle
sDbDomain : jtl.co.ke
sDbPort : 1524
sDbSid : JCLONE
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@oracle.jtl.co.ke:1524:JCLONE
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE.jtl.co.ke)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:661)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:595)
Current database Version is 11.2.0.2
Apps Version is 11.5.10.2
RUP version is 6
Forms Patchset version is 19
Please advise how to resolve this error ?
Regards
Mohammed.

Please refer to these docs/links.
Troubleshooting RapidClone issues with Oracle Applications 11i [ID 364565.1]
Adcfgclone.pl DBTier is failing with error for dbms_backup_restore.zeroDbid(0) [ID 361157.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01503+AND+ORA-01159+AND+ORA-01110&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Internal Error occurred while calling the ProcessDPCommands API

We have installed Business Objects XI with MySQL. We are getting following error when we click on view query on the WEBI Reports
" Internal Error occurred while calling the ProcessDPCommands API Error WIS 30270".
When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
Please hep to fix this problem
Installation is on Solaris 10
Edited by: AshishDatar on Nov 6, 2009 3:00 PM
Installation is on Solaris 10

did you check whether universe connection is pointing to the correct db?The following url might be helpful:
[http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous]

TF255424: An error occurred while installing SharePoint Products. (SharePoint 2012)

I want to install both SQL Server and Team Foundation Server on the same machine. Operating system of my server machine is Microsoft Windows Server 2008 R2 Service Pack 1. I first install Microsoft SQL Sever 2012 Enterprise edition without any error. After
that i tried to install Microsoft Team Foundation Server 2012. Team Foundation Server configuration got complete. Microsoft SharePoint Foundation 2010 installed successfully but while configuring SharePoint extension i am getting the following error.
"TF255424: An error occurred while installing SharePoint Products. For more information, open Event Viewer and review the application log. You might need to manually install Windows SharePoint Foundation 2010."
Please help.
[Info @12:19:36.259]
[Info @12:19:36.259] +-+-+-+-+-| Environment |+-+-+-+-+-
[Info @12:19:36.260] Environment: FullEnvironment
Setup:
InstallPath: C:\Program Files\Microsoft Team Foundation Server 11.0\
IsTfsExpress: False
ToolsPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Tools
ApplicationTierPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Application Tier
BuildTierPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Tools
ProxyPath: C:\Program Files\Microsoft Team Foundation Server 11.0\Version Control Proxy
SetupUser: ETS-WEBAPP\tfsadmin
WebServicePath: C:\Program Files\Microsoft Team Foundation Server 11.0\Application Tier\Web Services
LicenseEdition: PID_RANGE_VL
SystemTfsTemp: C:\Windows\Temp\TFSTemp
SharePointInstallTemp: C:\Windows\Temp\TFSTemp\WSSInstall
InstalledLanguages: System.Collections.Generic.List`1[System.Int32]
InstalledLanguagesString: 1033;
OS:
MachineName: ETS-WEBAPP
HostName: ETS-WEBAPP
IsClientOS: False
IsServerOS: True
IsDomainController: False
IsMachineInWorkgroup: False
IsMachineInDomain: True
IsHomeEdition: False
IsUnsupportedEdition: False
Version: Server2008R2
MajorVersion: 6
MinorVersion: 1
ProcessorCount: 4
ServicePackMajor: 1
ServicePackMinor: 0
IsOSPostTfsRelease: False
VisibleMemoryMB: 12287
AdjustedMemoryGB: 12
Iis:
IsInstalled: True
PreviouslyFailedConfig: False
RequiredIisFeaturesInstalled: True
OS:
MachineName: ETS-WEBAPP
HostName: ETS-WEBAPP
IsClientOS: False
IsServerOS: True
IsDomainController: False
IsMachineInWorkgroup: False
IsMachineInDomain: True
IsHomeEdition: False
IsUnsupportedEdition: False
Version: Server2008R2
MajorVersion: 6
MinorVersion: 1
ProcessorCount: 4
ServicePackMajor: 1
ServicePackMinor: 0
IsOSPostTfsRelease: False
VisibleMemoryMB: 12287
AdjustedMemoryGB: 12
Sql:
SqlInstance 0:
Name: MSSQLSERVER
FullName: ETS-WEBAPP
Edition: Enterprise Edition
Version: 11.0.2100.60
IsWow64: False
LCID: 1033
IsExpressEdition: False
IsFullEdition: True
IsSupported: True
IsSharePointSupported: False
IsUpgradable: False
WindowsServiceName: MSSQLSERVER
SharePoint:
IsInstalled: True
IsProvisioned: False
IsAdminDbConfigured: False
IsAdminSiteConfigured: False
IsRunningSiteOnWebAppPort: False
Version: 14.0.6029.1000
WssAdminUrl: http://ets-webapp:17012/
WssSiteUrl: http://ets-webapp/sites
ReportingServices:
IsInstalled: True
DefaultInstance:
InstanceIdentifier: ETS-WEBAPP
HostName: ETS-WEBAPP
InstanceName: MSSQLSERVER
ReportServerInstance: Microsoft.TeamFoundation.Admin.ReportServerInstance
IsConfigured: True
ReportWebServiceUris[0]: http://ETS-WEBAPP:80/ReportServer
ReportManagerUris[0]: http://ETS-WEBAPP:80/Reports
Instances[0]:
InstanceIdentifier: ETS-WEBAPP
HostName: ETS-WEBAPP
InstanceName: MSSQLSERVER
ReportServerInstance: Microsoft.TeamFoundation.Admin.ReportServerInstance
IsConfigured: True
ReportWebServiceUris[0]: http://ETS-WEBAPP:80/ReportServer
ReportManagerUris[0]: http://ETS-WEBAPP:80/Reports
PowerTools:
IsBackupToolConfigured: False
[Info @12:19:36.260]
[Info @12:19:36.260] +-+-+-+-+-| Configuration Plan |+-+-+-+-+-
[Info @12:19:36.260] - ContainerTask (ContainerNode) : root
- ConditionalTask (ConditionalNode) : Provisioning SharePoint
- ContainerTask (ProgressNode) : Configure SharePoint
- ConfigureSharepointProvision (ConfigureNode, 208) : Configuring the SharePoint Products
SqlInstance = ETS-WEBAPP
AdminSiteAccountName = Domain\tfsuser
PasswordSupplied = *****
SiteUrl = http://ets-webapp/
AdminPort = 17012
TfsServiceAccount = Domain\tfsuser
- ContainerTask (ProgressNode) : Extending SharePoint
- ConfigureSharepointUploadData (ConfigureNode, 209) : Uploading solutions and templates ...
- ConfigureResetSPTimer (ConfigureNode, 214) : Resetting Sharepoint Timer Service ...
- ConfigureIisReset (ConfigureNode, 801) : Resetting IIS ...
- ConfigureMarkFeature (ConfigureNode, 140) : Marking feature configured status
FeatureType = SharePointExtensions
IsConfigured = True
- ConfigureWssHealthCheck (ConfigureNode, 210) : Check if sharepoint is responsive
SiteUrl = http://ets-webapp/
- ConditionalTask (ConditionalNode) : SharepointEntries
- ContainerTask (ProgressNode) : Configuring Services
- ConfigureAddSharePointEntries (ConfigureNode, 207) : Configuring SharePoint application entries
SharepointRootUri = http://ets-webapp
SharepointAdminUri = http://ets-webapp:17012/
DefaultSharePointPath = sites
ApplicationTierUri = http://ets-webapp:8080/tfs
ApplicationTierServiceAccount = NT AUTHORITY\NETWORK SERVICE
- ConfigureAddAccountToLocalWss (ConfigureNode, 800) : Add account to WSS farm admin group
Account = NT AUTHORITY\NETWORK SERVICE
AdminUrl = http://ets-webapp:17012/
UseRetainedSettings = False
[Info @12:19:36.260]
[Info @12:19:36.260] +-+-+-+-+-| Running root: root |+-+-+-+-+-
[Info @12:19:36.260]
[Info @12:19:36.260] +-+-+-+-+-| root |+-+-+-+-+-
[Info @12:19:36.260] Starting Node: CONTAINER
[Info @12:19:36.261] NodePath : Container
[Info @12:19:36.261] Node returned: Ignore
[Info @12:19:36.261] Completed root: Ignore
[Info @12:19:36.261] -----------------------------------------------------
[Info @12:19:36.261]
[Info @12:19:36.261] +-+-+-+-+-| Running Provisioning SharePoint: Provisioning SharePoint |+-+-+-+-+-
[Info @12:19:36.261]
[Info @12:19:36.261] +-+-+-+-+-| Provisioning SharePoint |+-+-+-+-+-
[Info @12:19:36.261] Starting Node: CONDITION
[Info @12:19:36.261] NodePath : Container/Conditional
[Info @12:19:36.261] Node returned: Ignore
[Info @12:19:36.261] Completed Provisioning SharePoint: Ignore
[Info @12:19:36.261] -----------------------------------------------------
[Info @12:19:36.262]
[Info @12:19:36.262] +-+-+-+-+-| Running Configure SharePoint: Configure SharePoint |+-+-+-+-+-
[Info @12:19:36.262]
[Info @12:19:36.262] +-+-+-+-+-| Configure SharePoint |+-+-+-+-+-
[Info @12:19:36.262] Starting Node: CONTAINER
[Info @12:19:36.262] NodePath : Container/Conditional/Progress
[Info @12:19:36.262] Node returned: Ignore
[Info @12:19:36.262] Completed Configure SharePoint: Ignore
[Info @12:19:36.262] -----------------------------------------------------
[Info @12:19:36.262]
[Info @12:19:36.262] +-+-+-+-+-| Running ConfigSPProvision: Configuring the SharePoint Products |+-+-+-+-+-
[Info @12:19:36.263]
[Info @12:19:36.263] +-+-+-+-+-| Configuring the SharePoint Products |+-+-+-+-+-
[Info @12:19:36.263] Starting Node: CSPPROVISION
[Info @12:19:36.263] NodePath : Container/Conditional/Progress/CSPPROVISION
[Info @12:19:36.263]
[Info @12:19:36.263] +-+-+-+-+-| SharepointProvision::ConfigureDatabase |+-+-+-+-+-
[Info @12:19:36.263] Configuring the SharePoint Products database ...
[Info @12:19:36.263] SharePoint Products::ConfigureDatabase
[Info @12:19:36.263] GrantLogOnAsAService is called. User name: tfsuser [Info @12:19:36.269] Checking if Authenticated Users group is a member of Users group.
[Info @12:19:36.272] sid = S-1-5-4
[Info @12:19:36.272] sid = S-1-5-11
[Info @12:19:36.272] sid = S-1-5-21-1481031050-1694664162-2121907377-513
[Info @12:19:36.272] sid = S-1-5-21-1529747324-2324938602-2105273467-1015
[Info @12:19:36.272] Authenticated Users group is a member of Users group.
[Info @12:19:36.300] C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe
[Info @12:19:36.300] -o setconfigdb
[Info @12:19:36.300] -databaseserver ETS-WEBAPP
[Info @12:19:36.300] -farmuser domain\tfsuser
[Info @12:19:36.300] -farmpassword ********
[Info @12:19:36.300] Process starting: fileName=C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe arguments=-o setconfigdb -databaseserver ETS-WEBAPP -farmuser domain\tfsuser -farmpassword ****************
[Info @12:20:04.869] Process finished: fileName=C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\bin\stsadm.exe arguments=-o setconfigdb -databaseserver ETS-WEBAPP -farmuser domain\tfsuser -farmpassword **************** exitCode=-1
in 28566 ms
[Info @12:20:04.869]
[Info @12:20:04.869] WARNING: SharePoint no longer customizes Integrated Authentication security settings. This Web application may be using Kerberos, which can require manual configuration. See "http://support.microsoft.com/?id=832769" for
more information.
[Info @12:20:04.869]
[Error @12:20:04.869] An error occurred while getting information about the user tfsuser at server telenor.com.pk: Access is denied
[Error @12:20:04.869]
[Info @12:20:04.869] ReturnCode=-1
[Info @12:20:04.874] Node returned: Error
[Error @12:20:04.874] TF255424: An error occurred while installing SharePoint Products. For more information, open Event Viewer and review the application log. You might need to manually install Windows SharePoint Foundation 2010.
[Info @12:20:04.874] Completed ConfigSPProvision: Error
[Info @12:20:04.874] -----------------------------------------------------
[Info @12:20:04.880] Execution results:
[Info @12:20:04.880] Overall result: Failure
[Info @12:20:04.880] Nodes completed: 1
[Info @12:20:04.880] Nodes succeeded: 0
[Info @12:20:04.880] Nodes skipped: 0
[Info @12:20:04.880] Nodes with errors: 1
[Info @12:20:04.880] Nodes with warnings: 0
[Info @12:20:04.880] Number of error messages: 1
[Info @12:20:04.880] Number of warning messages: 0
[Info @12:20:04.880] Number of info messages: 0
[Error @12:20:04.881] Activity failed.
[Info @12:20:04.881] Configuration failed. Unconfiguring.
[Info @12:20:04.885] Setting the IsConfigured flag for feature SharePointExtensions to False.
awias

looks like here is the your problem "An error occurred while getting information about the user moss.service
at server telenor.com.pk: Access is denied"
try to add the user into the managed account via powershell. the user you trying to configure it.
or change the user to some body else here is culprit account "telenorpk\moss.service"
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Cg42.. error occured in edit documnet

Similar Messages

Maybe you are looking for