Chage property classification key in as02 and populating the useful life
Hi.
I have maintained values for PCK and useful lifes in one Ztable and written code in the user exit ZXAISU04 to change the useful llife based on the property classificaion key defined in the table. When i am creating assets, it was updating the useful life based on property classification key (VMGLI) given in As01 after executing the code written with reference to ztable values.
But when I am changing the property classfication key in As02, it was not changing the values, based on the changed Property classification key. The user exit is perfectly triggered and changed values inside. But not updating after saving in AS02.
can we change property classification key in AS02 and if it is possible, why is it not changing the value of useful life written in the user exit code.
Is there any configuration required for this requirement/
Please update if any one worked on this requirement.
Regards
Rajani Yeuri
Hello Rajani Yeuri
It's system standard behavior, please refer note 44882 for details.
Hence, please consider to use worklist or BAPI to change property classification key and useful life together.
Hope it's helpfu.
Best regards
George
Similar Messages
-
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
HOw to create a Batch file for java application and whats the use of this ?
HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advanceFirst of all, you're OT.
Second, you can find this everywhere in the net.
If you got a manifest declaring main class (an classpath if needed), just create a file named whatever.bat, within same directory of jar file, containing:
javaw -jar ./WhateverTheNameOfYourJarIs.jar %*By the way, assuming a Windows OS, you can just double click the jar file (no batch is needed).
Otherwise use:
javaw -cp listOfJarsAndDirectoriesSeparedBySemiColon country/company/application/package/className %*Where 'country/company/application/package/' just stands for a package path using '/' as separator instead of '.'
Don't specify the .class extension.
Javaw only works on Windows (you asked for batch, I assumed .BAT, no .sh), in Linux please use java.exe (path may be needed, Windows doesn't need it 'cause java's executables are copied to system32 folder in order to be always available, see PATH environment variable if you don't know what I'm talking about) and use ':' as classpath (cp) separator.
The '%***' tail is there in order to pass all parameters, it only works on Windows, refer to your shell docs for other OSs (something like $* may work).
This way you have a command you can call to launch your code (instead of opening NetBeans just to see your app working). You could schedule tasks on it or just call it in any command prompt (hope you know what it is 'cause there have been people in this very same forum with no clue about it, if not just hold the 'Windows button' and press 'R', then type 'cmd' and run it).
Finally add dukes and give 'hem away.
Bye. -
My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?
You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac. -
Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program
Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program
Sorry I can't get the screen print to upload
It says
Mandatory Update Available
A Mandatory version of this application is available for download. Application can't continue without installing this version.
Application: Acrobat_com
Installed version: 2.0.0.0
Update Version : 2.3.0.0
Download now Quit
Release notes ( this is blank)
After selecting 'Download Now' I get the following message;
Download failed
There was an error downloading the update. Error #16820
Close -
I upgraded to 4 and lost the use of the back/forward buttons when in a new tab (ok on homepage) Re-installed 3.6 but problem still persists. Any remedy ????
*New tab toolbar button: https://addons.mozilla.org/firefox/addon/new-tab-toolbar-button/
-
Just got my iPad 2 three days ago and noticed the battery life drops faster than I expected at least compared to the others ones around, please I need to know the cause and how to effect necessary changes that will prolong the battery life as I have gone through the settings which includes turning off the push notifications, reduce brightness and so on but that doesn't seem to help much.
FYI
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
~~~~~~~~~~~~~
Since you are a new iPad user .....
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download an iPad User Guide to the iPad from the iTunes store.
Cheers, Tom -
HT1784 Can I use Apple TV to project my key note presentations and numbers sheets using my iPad ?
I have installed Apple TV and can strem itunes, movies, photos from my iPad using appleTV on to my TV screen, how can I use key note presentations and pdfs from my iPad on to my TV?
sanjay
If your iPad is 2Gen or newer and has iOS5.0 or newer you can mirror (not 1 Gen ATV though) it so yes. You will need to be on same netwiork and apple id for both devices.
See link http://support.apple.com/kb/HT5209
Regards
Jules -
Property file should be externalize and outside the archive (say ear) ?
My team architect is suggesting me to externalize the property files like locale resources (e.g messages.en.properties ), log4j (e.g log.properties) etc .The reason is to avoid recompiling incase of changes to this resources.
Example tomorrow if something goes wrong in production and we want to enable the debug log,then we can change the property file ,restart the server and we are good.If it was inside the archive file we have to create a brand new
a brand new archive file ,redeploy it and restart the server again.
In my entire work experience I never externalized this resources because they are inherent part of the archive file.Hence any changes then recreate the archive file and redeploy.
The team architect might have some good reason.
Please advice.
Thanks
mManjit wrote:
My team architect is suggesting me to externalize the property files like locale resources (e.g messages.en.properties ), log4j (e.g log.properties) etc .The reason is to avoid recompiling incase of changes to this resources.
Example tomorrow if something goes wrong in production and we want to enable the debug log,then we can change the property file ,restart the server and we are good.If it was inside the archive file we have to create a brand new
a brand new archive file ,redeploy it and restart the server again.
In my entire work experience I never externalized this resources because they are inherent part of the archive file.Hence any changes then recreate the archive file and redeploy.
The team architect might have some good reason.
Please advice.
Thanks
mIf the major hurdle is changing log levels dynamically..you could look at http://logging.apache.org/log4j/1.2/apidocs/org/apache/log4j/PropertyConfigurator.html#configureAndWatch%28java.lang.String%29 -
Parsing an EDI file and populating the data into database table
Hi ,
Please help me in parsing an edi file and getting the required columns.
we get an EDI file from a bank. I need to parse that file and populate the db table with the required columns.
the file is '*' delimited and every line ends with '\'.
The record starts with 'ST*' and ends with 'SE*'.
sample edi file is
ISA*00* *00* *ZZ*043000096820 *ZZ*2156833510 *131202*0710*U*00401*000001204*0*P*>\ ignore first 2 lines
GS*RA*043000096820*2156833510*131202*0710*1204*X*003020\
ST*820*000041031\
BPR*X*270*C*ACH*PPD*01*101036669***9101036669**01*031000053*DA*00000008606086714*131202\
TRN*1*101036661273032\
DTM*007*131202\
N1*1U*BPS\
N1*BE*MICHAEL DRAYTON*34*159783633\
N1*PE*BPS*ZZ*183383689C2 ABC\
N1*PR*ABC TREAS 310\
SE*9*000041031\ ST*820*000041032\
BPR*X*686*C*ACH*PPD*01*101036669***9101036669**01*031000053*DA*00000008606086714*131202\
TRN*1*101036661273034\
DTM*007*131202\
N1*1U*BPS\
N1*BE*SAMIA GRAVES*34*892909238\
N1*PE*BPS*ZZ*184545710C5 ABC\
N1*PR*ABC TREAS 310\
SE*9*000041032\
Below is the procedure I am trying to use for parsing that file. but the logic is not working. can you please help me in doing this. its very urgent requirement.
CREATE OR REPLACE package body p1 is
Function parse_spec(p_str varchar2) return t_str_nt is
begin
return regexp_replace(p_str,'\\$',null);
end;
procedure edi( is
l_out_file utl_file.file_type;
l_lin varchar2(200);
field1 number(9);
field2 varchar2(10 byte);
field3 varchar2(15 byte);
field4 varchar2(15 byte);
field5 varchar2(20 byte);
field6 varchar2(20 byte);
field7 varchar2(20 byte);
field8 varchar2(9 byte);
field9 varchar2(15 byte);
field10 varchar2(5 byte);
l_item_nt t_str_nt:=t_str_nt();
begin
l_out_file := utl_file.fopen (file_path, file_name, 'r');
IF utl_file.is_open(l_out_file) THEN
LOOP
BEGIN
l_item_nt:= utl_file.get_line(l_out_file, l_lin);
IF l_item_nt IS NULL THEN
raise no_data_found;
Else
for k in 1..l_item_nt.count loop
case
when l_item_nt(k) like 'ST*%' then
field1:= ltrim(regexp_substr(parse_spec(l_item_nt(k)),'[^*]+',1,3),0);
when l_item_nt(k) like 'BPR*X*%' then
field2 := regexp_substr(parse_spec(l_item_nt(k)),'[^*]+',1,3);
when l_item_nt(k) like 'TRN*1*%' then
field3:= regexp_substr(parse_spec(l_item_nt(k)),'[^*]+',1,3);
when l_item_nt(k) like 'DTM*007*%' then
field4:= regexp_substr(parse_spec(l_item_nt(k)),'[^*]+',1,3);
when l_item_nt(k) like '%*BE*%' then
field5 := regexp_substr(regexp_substr(parse_spec(l_item_nt(k)),'[^*]+',1,3),'[^ ]+', 1, 1);
field6 := regexp_substr(regexp_substr(parse_spec(l_item_nt(k)),'[^*]+',1,3),'[^ ]+', 1, 1);
field7 := regexp_substr(parse_spec(l_item_nt(k)),'[^*]+',1,5);
when l_item_nt(k) like '%*PE*%*ZZ*%' then
field8:= regexp_substr(regexp_substr(parse_spec(line),'[^*]+',1,5),'[^ ]+',1,1)
field9 := regexp_substr(regexp_substr(parse_spec(line),'[^*]+',1,5),'[^ ]+',1,2);
when l_item_nt(k) like 'SE*%' then
insert into t1(field1,field2,field3,field5,field6,field7,field8,field9)
-- values(field1,field2,field3,field5,field6,field7,field8,field9);
else
dbms_output.put_line ('end of line');
end case;
end loop;
end if;
end loop;
utl_file.fclose(l_out_file);
exception
when no_data_found then
dbms_output.put_line('No data found');
end;I would not use regular expressions for parsing as it is CPU intensive - and standard string processing suffices.
I would break the EDI up into lines. I would tokenise each line. I then have 2d array that can be referenced to find a specific field. E.g. line x and token y is field abc.
Basic approach:
SQL> create or replace type TStrings as table of varchar2(4000);
2 /
Type created.
SQL> -- create a parser that tokenises a string
SQL> create or replace function Tokenise(
2 csvLine varchar2,
3 separator varchar2 default ',',
4 enclosedBy varchar2 default null
5 ) return TStrings is
6 strList TStrings;
7 str varchar2(32767);
8 i integer;
9 l integer;
10 enclose1 integer;
11 enclose2 integer;
12 encloseStr varchar2(4000);
13 replaceStr varchar2(4000);
14
15 procedure AddString( line varchar2 ) is
16 begin
17 strList.Extend(1);
18 strList( strList.Count ) := Replace( line, CHR(0), separator );
19 end;
20
21 begin
22 strList := new TStrings();
23
24 str := csvLine;
25 loop
26 if enclosedBy is not null then
27 -- find the ennclosed text, if any
28 enclose1 := InStr( str, enclosedBy, 1 );
29 enclose2 := InStr( str, enclosedBy, 2 );
30
31 if (enclose1 > 0) and (enclose2 > 0) and (enclose2 > enclose1) then
32 -- extract the enclosed string
33 encloseStr := SubStr( str, enclose1, enclose2-enclose1+1 );
34 -- replace the separator char's with zero char's
35 replaceStr := Replace( encloseStr, separator, CHR(0) );
36 -- and remove the enclosed quotes
37 replaceStr := Replace( replaceStr, enclosedBy );
38 -- change the enclosed string in the big string to the replacement string
39 str := Replace( str, encloseStr, replaceStr );
40 end if;
41 end if;
42
43 l := Length( str );
44 i := InStr( str, separator );
45
46 if i = 0 then
47 AddString( str );
48 else
49 AddString( SubStr( str, 1, i-1 ) );
50 str := SubStr( str, i+1 );
51 end if;
52
53 -- if the separator was on the last char of the line, there is
54 -- a trailing null column which we need to add manually
55 if i = l then
56 AddString( null );
57 end if;
58
59 exit when str is NULL;
60 exit when i = 0;
61 end loop;
62
63 return( strList );
64 end;
65 /
Function created.
SQL>
SQL>
SQL> declare
2 ediDoc varchar2(32767) :=
3 'ISA*00* *00* *ZZ*043000096820 *ZZ*2156833510 *131202*0710*U*00401*000001204*0*P*>\GS*RA*043000096820*2156833510*131202*0710*1204*X*003020\ST*820*000041031\BPR*X*270*C*ACH*PPD*01*101036669***9101036669**01*031000053*DA*00000008606086714*131202\TRN*1*101036661273032\DTM*007*131202\N1*1U*BPS\N1*BE*MICHAEL DRAYTON*34*159783633\N1*PE*BPS*ZZ*183383689C2 ABC\N1*PR*ABC TREAS 310\SE*9*000041031\ST*820*000041032\BPR*X*686*C*ACH*PPD*01*101036669***9101036669**01*031000053*DA*00000008606086714*131202\TRN*1*101036661273034\DTM*007*131202\N1*1U*BPS\N1*BE*SAMIA GRAVES*34*892909238\N1*PE*BPS*ZZ*184545710C5 ABC\N1*PR*ABC TREAS 310\SE*9*000041032\';
4
5 lines TStrings;
6 tokens TStrings;
7 begin
8 -- split EDI string into lines
9 lines := Tokenise( ediDoc, '\' );
10
11 -- process line and extract fields
12 for i in 3..lines.Count loop
13 dbms_output.put_line( '***********************' ) ;
14 dbms_output.put_line( 'line=['||lines(i)||']' );
15 tokens := Tokenise( lines(i), '*' );
16
17 for j in 1..tokens.Count loop
18 dbms_output.put_line( to_char(j,'00')||'='||tokens(j) );
19 end loop;
20 end loop;
21 end;
22 /
line=[ST*820*000041031]
01=ST
02=820
03=000041031
line=[BPR*X*270*C*ACH*PPD*01*101036669***9101036669**01*031000053*DA*00000008606086714*131202]
01=BPR
02=X
03=270
04=C
05=ACH
06=PPD
07=01
08=101036669
09=
10=
11=9101036669
12=
13=01
14=031000053
15=DA
16=00000008606086714
17=131202
line=[TRN*1*101036661273032]
01=TRN
02=1
03=101036661273032
<snipped> -
I don't know why the battery life has just become so poor. I can listen to 1 song and lose 1/2% battery life. I had all the settings the same as before updating to ISO6 and now it just goes. I did drop it around the same time but I have a stong case so I don't see how this should effect it. If anyone knows how to fix it would be a great help because I used to love iPod but I am very dissapointed.
Internal damage from fall or loose connector. Take it to
Apple to be checked. -
Save and Protect your iPad Device: How to Save and Prolong the battery life of your new ipad
Please, as you read add more answers to this on how to prolong and save your ipad battery life. Thank you
Saving the battery life of your iPad
1.Keep Your iDevice Out of the Sun
Whatever you do, don’t leave your iPhone or iPod sitting in a hot car—heat kills batteries faster than any other factor, and your device that used to keep a charge for hours will eventually barely hold a charge, and you’ll have to pay Apple to get it replaced. The same thing holds true for any really hot environment: try and store your device in a cool place.
Reduce the Screen Brightness
If you keep the screen at maximum brightness all the time, you’re wasting a lot of battery life—and the screens these days are so bright anyway that you don’t really need to, especially at night. Head into Settings -> Brightness & Wallpaper to adjust the default level of brightness, which you can probably keep as low as 30% most of the time.
2. Make Sure the Screen Locks Quickly
Even if you’ve adjusted the screen brightness, there’s still no substitute for having it turn off quickly when you’re not using it. Head into General -> Auto-Lock to set the screen lock to happen as quickly as your device will let you. This makes a big difference if you are always picking up your phone and putting it back into your pocket without turning the display off.
3. Use Airplane Mode When You Don’t Need Internet (iPad/iPhone)
If you’re busy spending the next 8 hours playing Angry Birds, there might not be a good reason to have internet access, so you can consider using Airplane Mode, which turns off both Wi-Fi and the regular wireless radio. Of course, this will prevent phone calls if you’re on an iPhone—but if you’re busy with Angry Birds you probably don’t want the interruption anyway.
4. The more important reason to use Airplane Mode is when you’re mobile in an area with a really spotty connection—because the iPhone or iPad will try to stay connected at all times, it’s going to be constantly searching for a connection, which can drain your battery. Head into Settings and flip the Airplane Mode switch right up at the top of the screen.
Use Wi-Fi Instead of 3G if Possible
According to Apple, the iPad will get 10 hours of battery life under regular use with Wi-Fi enabled, but will only get 9 hours using 3G—the iPhone gets 6 for 3G and 10 for Wi-Fi. Of course, if you’re heavily using the Wi-Fi, you’ll still be draining the battery—the point is under similar workloads, Wi-Fi is better than 3G for battery life.
You can enable Wi-Fi under Settings -> Wi-Fi, and then pick the network you’d like to connect to.
5. Reduce or Eliminate Mail & Calendar Checking
If you’ve got a bunch of email, calendar, or contact accounts configured, and they are all being checked and downloading email on a regular basis, you’ll be draining the battery an awful lot faster than you need to.
Head into Settings -> Mail, Contacts, Calendars -> Fetch New Data and change the setting to the least frequent check possible. If you don’t use it often, you can just turn Push off entirely and then manually check when you need to.
6. Reduce or Eliminate Push Notifications
Do you really need notifications from Twitter or whatever other apps you’re running? You can turn these off one-by-one, or turn off Push entirely by heading into Settings -> Notifications, and save a bit of extra battery life since your device won’t be pulling in data for those applications anymore.
7. Reduce or Eliminate System Sounds
This one is probably a little silly, but if you really don’t care for the system sounds you can save a small amount of battery life by removing the sounds. A very, very small amount, most likely. Head into Settings -> General -> Sounds to change them.
8. Disable Location Services
If you don’t really need the location services, you can disable them to save some battery life. Head into Settings -> General and flip the Location Services setting to off.
9. Disable Bluetooth If You Don’t Need It
If you don’t use a Bluetooth headset or keyboard, you should keep the Bluetooth radio disabled to save some extra battery life. Head into Settings -> General -> Bluetooth to flip it on or off.
10. Disable Vibrate Feature in Games
If you’ve got a game that uses the vibrate feature, you can turn that off to save some battery life. This mostly matters if the game heavily uses it, and you’ll need to change the setting for the game. As a side note, and it should go without saying, if you’re running really intensive video games, they will kill your battery very quickly.
11. Charge and Discharge Your Battery Regularly
Your iDevice needs to be fully discharged and recharged at least once a month to operate at maximum efficiency and keep the battery from dying. You’ll also want to make sure that you don’t store the device with a dead battery, as that can also cause the battery to lose charge capability—when your battery dies, make sure to recharge it quickly.
<Edited by Host>
Irem Bright writes and would love your own addition if you got other helpful tips.
Thank you all.11. Charge and Discharge Your Battery Regularly
Your iDevice needs to be fully discharged and recharged at least once a month to operate at maximum efficiency and keep the battery from dying. You’ll also want to make sure that you don’t store the device with a dead battery, as that can also cause the battery to lose charge capability—when your battery dies, make sure to recharge itquickly
The reason that Apple suggests you drain and recharge your battery once a month is not because it affects the life ofthe battery. What it actually does is calibrate the battery sensor, giving you a more accurate reading.
Other than that, you done an admirable job of summarizing the Knowledge Base article:
http://www.apple.com/batteries/ipad.html
Best of luck. -
Since iphone5 6.1.3 upgrade mine has been running hot and totally reduced the battery life. Before I was getting 2days out of it. Now it's half a day ... No new apps and I've been closing down fully all apps. I think something is definitely up with 6.1.3
Are there many others experiencing this?The number of apps that run in the background are very few and far between. An app being in the recently used apps bar or dock means just that for the most part - the app was recently used only and is not running.
Have you powered your iPhone off and on and/or tried a reset which is similar to a computer restart since the update was installed?
Are you accessing an Exchange account with the Mail app on your iPhone? -
How to search a property value in a TDMS and return the group name.
Hi.
Please help
I want to search a TDMS file by property value and then return the group names or channels.
I am using labview 8.2 with the connectivity toolkits.The error # is -2558
I try to close the TDMS file before it reach the search part but still give me the error code -2558
Attachments:
search and read property value per group.jpg 77 KB -
What is cause of processing delay. Fraction of a second delay between hitting a key and seeing result on screen. Another example is when scrolling, the scroll is delayed for a fraction of a second.
This is only in Word? Sounds like Microsoft's software has a bug. Have you checked for available updates in Microsoft AutoUpdate?
Maybe you are looking for
-
Safari 5.0.3 Crashing Often Mac OS 10.5.8
Since upgrading, we're experiencing multiple, random crashes of Safari 5.0.3. We're on a Mac with OX 10.5.8. I've read many posts similar but suggestions are all different. Have cleared Cache and History. That helps, but happens again without fail. H
-
Service Profile Response time values from CRM
Hi experts, I want to capture RESPONSE TIME from SERVICE PROFILE values defined in CRM system.If you refer CRMD_SERV_SLA transaction then you can find the defined values. In 0CRM_SRV_PROCESS_H Catalog, Code group, Code these values
-
Data Pump - how can I take a hot export of a database?
Hi, I have a running database, and I want to kick off an export using Data Pump. I don't want any transactions that take place once I kick off the export to be in the export file. Is this how Data pump works? Thanks.
-
On iOS 5 ho do I get my camera to show on the lock screen
I have an iPhone 4 and I have upgraded to iOS 5 & iCloud but can't see my camera icon on the lock.screen. How do I set this up?
-
I am suddenly not able to download apps.
I receive a message that whichever app I'm trying to download is "not available for purchase at this time. Please try again later". It is happening with too many apps for this to be germane to the app itself. Sometimes, I am asked to verify my paym