Challange to MSI.. New BIOS for the K8T that supports CoolNQuiet

MSI..
Lots of people are waiting. I hope that you will respond to this request soon. Asus already has theirs out!!?!?!
Simon

Quote
Originally posted by Bibihest
I just tried that beta BIOS, but it's not working for me at all... My speed is the same nomatter how long I wait.. Does anything else than CNQ need to be enabled in BIOS?? I don't think that Dynamic overclocking or anything else has to be enabled right??
Hope the next full bios will be out soon..
IT works. JUST read the faqs and you shuldnt have any problems.

Similar Messages

I need a new Bios for the MSI k7n2 L!!!!!!!!

I need a new bios for the MSI k7n2 L, because i need more voltage for the MIcroprocesor and more voltage for the DDR.
Anybody know if exist some bios BETA or something,
And when MSI will release the New bios for this mother?
Thank for respond
Sory for my english
N7.net | SebaS

I hope you find one...(doubtlfully tho)....alot of people would like to have what you asked for......
One question why do you feel you need more voltages?
Is the system unstable?..........or do you just want to overclock more?

New BIOS for the MEGA.

We need one......for a number of reasons.
We need Prescott support, so the Celeron D would be an option. Northwood Celerons are getting scarce since they're out of production. My MEGA 651 could easily handle a slightly hotter Celeron....say 2.4 D. Most boards will handle Prescotts with only a BIOS upgrade. I have no reason to suspect otherwise with these MEGA boards.
My MEGA 651 has no option in the BIOS to adjust/change/turn off the fan control circuit. I would like to use Speedfan to control fan speeds.....but cannot. The board's own controller and the Speedfan program conflict, causing unstable fan operation. Most boards using auto-fan control let the user adjust the operation. The mega BIOS could be up-graded to do so.
I'd like to see some FSB adjustment in the BIOS....more than 100/133.
There are many improvements a new BIOS could offer....at very little cost to MSI. Maybe Doctor Stu could use some of his clout to get one written.

i don't have any clout
the 651 is an old model, so i doubt if we'll see any updates from MSI now, seeing as they will be pushing the new 865PRO now
unfortunately i also believe that the lack of prescott support is down to the SiS 651 chipset used, rather than MSI themselves

New Bios for the KT4 Ultra bfisr mobo

Hello all!
This is the first post for me in this forum, and i want to ask you guys if they fixed the new 1.4 bios and temp reading for the KT4 ultra motherboard?
Currently i am running bios 1.3 but like to stay uppdated hardware wise.
Would you guys recommend flashing to this new bios?
I used the LiveUpdate 2 utility last time and it worked flawlessly.
Hows the overclocking options in the new 1.4 bios?
Do Msi mess with the ram timings from bios to bios like my old abit mobo did?had to put slower timings from every uppgrade of bios with that board...does msi do the same thing?I wanna be able to run cas2 etc as i do atm.
Well that was it basicly.
All answers will be higly preciated.
TIA.

Hi,
Nope, the temp reading problem isn't fixed yet.
As it's still there in version 1.5B1.
MSI is investigating this.
As for HD speed, I have not seen a fix so far.
So if your system is stable at BIOS 1.3, stay with it.
As BIOS'ses are NOT updates but bug-fixes.
They only update they do is giving support for newer CPU's if needed.
Best not flash if you don't have problems.

New Bios for K7T266 Pro2-RU

Hi All,
Are there any new bios' for the K7T266 PRO2-RU (i.e., above 3.7), that will support the AMD 2200+, 2400+ Processors once the Modification is done?
Thanks.
Craig

Hi,
The K7T266pro2 (MS-6380 V2.0) needs the modification to support all the latest 266FSB (TBred) CPU's because there is a timing change, removing the capicitor solves this and allows you to get the CPU starting.
MSI's official statement is that they don't support this as the board is long out of production.
However, they where nice enough to give us the modification in order to give you the posibility to get it running.
They're plan was to stop releasing BIOS'ses at v3.60 because there was no need to release another.
I convinced them to release 3.70 that has updated CPU-ID code for all 266FSB CPU's, and no again, they still don't support any CPU over the fastest Palomino officialy.
What they did was giving us the posibility to use an outdated board a bit longer, be happy about that.
As for the testing of CPU's on this board, that stopped at BIOS 3.50...
Any given board will fade away at some point in time, thanks to MSI (unofficialy), the K7T266pro2 with the modification can be used a bit longer......
All you need for the right multiplier is leave it at auto....as the correct one is hardcoded on the CPU itself...

New BIOS for Diamond Plus any problem noted yet.

Anybody using the new BIOS for the Diamond Plus Version 3.09 BIOS.
I have got it installed and upgrade went will, but be ready for changes. Go over you BIOS Setting each and every parameter, because they have changed a lot of the defaults, like all Network controllers are disabled by default. The have made changes to the Hyper Transport Defaults setting they are what they should have been in the first place.
Marvel Yukon network controller drivers of old will not will not load and MSI USA download for the driver is off line. Tw site is not down but not taking new requests for the drive because of traffic load. Old nVidia network drives loaded after I enabled on board LAN on in the BIOS.
That, all I have checked out so far, Oh yes the changes in Memory BIOS setting, but have not been able to check all of the out. If some one with experience with memory BIOS settings could check them out and give report back it would be helpful.
We asked for it now we got it, for better or worse.
Roger
When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings. It is almost impossible to estimate what your problem is without knowing something about it. Here is the link to the web site.

Quote from: NoBS on 22-March-06, 21:40:24
Wow, funny how 2 gigs still needs a paging file with a standard desk top!
Of course, even funnier just how fast 2 gigs can be eat'n up with 3d rendering and audio/video encoding!
Just blowing my mind, remember when 32meg RAM was considered over kill?
Ah those 3.1 days
that's not a bios issue it is a xp home and xp pro 32 bit issue.
if you want 4 gigs you need a 64 bit OS like server 2003 or xp pro 64 bit.
Yes it will run in dual channel but due to limitations you will have it run in ddr 333 *UNLESS* you have single sided 1 gig sticks.
Even with 4 gigs you will see slightly less than 4 gigs in bios, as a portion is Used there. once in windows you will see the full 4 gigs.
btw I am on my old P4 3.0e prescott as i sent in my two 7800gt's for the step up program.
They should be here by the 31st.
For what it is worth I have had 4 gigs working on this mb and cpu using ms's free dl of their 64 bit os.
It took me for ever to figure out why i was only getting 333 ddr and 3.5 gigs. this was 18 months ago.
When i ran a dual boot of the xp hom and xp 64 with 4 gigs, i did not see the support from my prefered software vendors. So i sent back 2 gigs, and stuck with xp home. Now that i have the new amd i stepped up to xp pro 64 bit and love it.

When will a new BIOS for K7N2G-LISR be released

Anyone have any idea when a new BIOS for the K7N2G-LISR will be released or if a new beta bios is available :D

I have a BIOS bug for MSI.
I can't disable the tv-out function. Therefore I can't watch any DVD's. I have to take out my G3 to enable me to adjust the onboard GFX settings and there is no option to disable tv-out as described in the manual.
I have emailed MSI and their tech support are either extremely busy or completely useless like their software.
This is completely driving me up the fecking wall!!!
I love MSI hardware but I have to avoid any MSI software like the plague... unfortunately the BIOS is unavoidable.
MSI, please sort this or I will be forced to return my hardware and look for another brand. I'm considering ABIT so be warned.
Could we draw up a list of bugs to give to MSI so we can try and get them sorted?
Sorry for the ranting, but theres not much I can do. :(
L8rz

I want to buy 2 MSI-478 Retention Modules for the K8T Master2-FAR

Where to buy P4-478 Retention Modules for the K8T Master2-FAR? I would like to have a Choice in heatsinks, I know that 478 clipon heatsinks may work, But Where do I buy the Retention Modules for this motherboard, Since real 478 Retention Modules are worthless when It concerns this K8T Master2-FAR motherboard(I bought one and It's in a really cheap and flimsy case), I ask as 603 heatsinks are mainly for servers and aren't too useful to Me, A new one that I've seen looks great, But It's passive, has 4 heatpipes, Is about 80x80mm in width and has no place for fans(bummer). I'd love to use the SP-94, But again It won't work as It is a bolt on 478 and as such It won't work, I'd also like to use a pair of Thermalright XP90(XP92?) heatsinks, But those may not fit as They use 92mm fans, So far the only heatsink that would be workable is the SLK-947U as It has the 478 Clips, I have one on one of My 2 other PCs(Nforce2 chipsets), 80mm fans would still be the max, But at least the heatsink would not be too bad. I just need the 2 retention modules with the 603 hole spacing that MSI made, On the other hand being the screws use a 3mm thread, I should be able to find those elsewhere, Somewhere. I just need one pair I might add. This is cause others have reported that Xeon water blocks do not fit(This was over on forums.2cpu.com).

Bump...
Actually since MSI had these Socket 478 Retention Modules custom made for this motherboard I may have to call MSI and ask, Since I was told a Xeon based Danger Den Maze4 Water block will not fit on this K8T Master2-FAR motherboard without the water block being modified slightly. And I suspect My motherboard was not New, It was I suspect in fact a Returned motherboard (a refunded purchase) and the reason I say this is cause the motherboard box (tab) was bent as It seems to have been inserted into the box a few times and the manual had one corner bent over slightly.

New Bios For MSI K8N Neo Platinum [ 1.55]

NEW BIOS FOR MSI K8N Neo Platinum !!!!
BIOS 1.55 FOR K8N
AND CLICK
Apothikeusi/Emfanisi (Greek Language )
Your CPU temperature is in the safe range. Please rest assured. If you are
willing to, would you please flash BIOS to the version 1.55 verifying? We
send it by attachment. As to how to flash BIOS, please refer to the word file
in the attached file. Please kindly inform us of the results. Thanks for your
cooperation.
In addition, please enter BIOS to load optimized defaults after flashing BIOS.
Please feel free to let us know if you still have any further issues or inquiries.
Best regards,
MSI Technical Support

OMG !!!!
Something is really weird about this bios !!!!
I can't boot overclocked from bios even at 220 HT, and at the beginning i was REALY disapointed.
Then i set it to optimize defaults ( and yes i did the whole flashing thing ) and i am now IN WINDOWS with my cheapo Kingston Value that did MAX 230 with problems NOW AT A WOOPING 237 Mhz and still going UP !!!!
OMG OMG....
If only i can get it to boot from bios.Seems pretty stable in windows even at 237.
Really strange guys.I thought 230 was my memory limit....
Gonna try higher and let you know.
P.S. this bios seems to like Kinston Ram....Value at least

New Bios for MSI 6850 OC

are interested me when will come a new bios for 6850 oć version.
because it has a problem with my memory and in some games we put out a black screen.
I tried everything and found a problem in the VRAM
because when I close the speed VRAM card I was more stable
this problem have gigabyte 6850 so they fix this problem with new bios
so anyone have information on when they will launch a new MSI bios to 6850 OC
sorry for my bad english I am from Serbia

Quote from: Svet on 16-January-11, 09:55:21
you can ask msi here: http://support.msi.com/ if there is a such
I explain to them my problem but we have not yet responded

Request new BIOS for MSI R9 270 GAMING 2GB

Hi there, I use W7SP1 with a Gigabyte GA-H87-HD3 mobo and the 13.12 drivers(14.4 suffer from very high OpenCL to Direct3D interop lag unfortunately, which is a showstopper with madVR) and I just bought this board with the exact same BIOS version number as on this link: techpowerup (.com)/vgabios/149707/msi-r9270-2048-131106.html
It's fairly silent under load and I'm happy with that, but when idle the fans seem hardlocked to 1040 rpm
Whatever fan percentage higher than 18% does increase the fan rpm speed, but anything lower still gives 1040 rpm.......what is the point to cool the GPU down to 28°C when its TJmax is 95°C? I would like to drop the fans speed when idle to maybe 700/800rpm and get the GPU to reach 40°C or so?
I run a SSD with a 350rpm oversized CPU fan, a passive PSU and several oversized case fans that also run very slowly, those 1040rpm are killing me....I used to own a VTX3D Vchamp HD7850 that allowed me to make my own custom fan speed curve in Afterburner: dead-silent when idle and slowly ramped up under load, perfect
Of course its cooler was a joke compared to your TF4 but you can see that Asus are now releasing graphic cards that are semi-passive with their fans shutting off until the GPU reaches 65°C, it makes no sense to me to use the TF4 at 1040 rpm when idle(and even more so on the 70W TDP GTX750Ti).
Long story short, I would really appreciate an unlocked BIOS please so I could build my own fan speed curve in Afterburner as I used to. I do plan on buying the future Maxwell's(a twice faster 750Ti would be awesome), I dearly hope that you will reevaluate your TF4 fan speed curves because otherwise I would more than likely buy a semi-passive Asus next time. Talk about wasted potential
I guess you hardlocked it so dumb ppl wouldn't set the fans to a fixed very low speed and toast the board, but posting an unlocked BIOS on your forum that's aimed at power users is just showing that you care. I know EVGA did post this kind of BIOS updates recently and you polished the TF4 cooler to such extents that it's truly a crying shame to be stuck at 1040 rpm and 28°C when idle
There is no question that TF4 is extremely effective under load with a 150W TDP GPU, but you can see that the 270X Powercolor board is quieter when idle in this comparison: tomshardware (.com)/reviews/radeon-r9-270-benchmark-review,3769-5.html
Hope you can help, I will gladly spread the word on HTPC forums because this board is close to perfection when using madVR.
Thank you very much in advance

OK thanks for the reply, but the 18% cap seems BIOS based...I have a hard time believing that they can't run any lower than 1040 rpm
Are you a mod? Working for MSI? This looks like a wild guess more than an official reply if you don't mind me saying.
For the record, that VTX3D board I mentioned in my previous PM was able to go down to 1%.
I would fix it myself but there are no BIOS editors for the R9 serie apparently....MSI simply capped the lowest PWM value: tpucdn dot com/rbe/RBE_Fan.png
Whatever way their speed's being throttled(PWM or voltage), they must be able to go slower than that. I could provide you links but EVGA did make clear that they capped the lowest speed of the fans on some of their boards so dumb users wouldn't fry them but they were entirely able to release unlocked BIOS binaries.
At this point I could either return it or unplug its fans and slap a 600rpm 140mm fan onto the board using zip ties.......it's just amazing that MSI managed to ultimately fail on such a detail. All the work put into the TF4 cooler goes down the drain
flobelix seems able to help, I hope he'll chime in: forum-en.msi dot com/index.php?topic=180521
Quote
Fan controller actually can control the fans, and the GPU gets less hot

MS-6702E - a new version of the K8T Neo?

Hi,
Looking through the downloads available for the K8T-Neo FIS2R (the MS-6702),
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=496&kind=1
...it seems that the latest Corecenter has been fixed to "support new mainboard: MS-7032, MS-6702E"
Whats the MS-6702E? A new version of the K8T-Neo?
Anyone got any idea?
Can see anything on the MSI Product News pages...

Yep asharrad, that can be your daily routine here at the forum - LOL I've been trying to keep up with this stuff also, and it's wearing the ends of my fingers out!

New BIOS for 915gvm3-v (7223-010) board?

I was referred to this board by a member of the overclock.net forums. He mentioned Murdok was perhaps working on a modified bios for the aforementioned motherboard that would unlock the option to adjust the FSB frequency. I was confused at first when that setting appeared in the manual, but not in the bios, but I was informed that the '-v' means it's a value board, and therefore cannot be overclocked. But I heard that there might be a new bios available. I tried searching a lot but every time I ended up with the 'you need to be more specific,' even though I used several search terms, a user name, and only selected one area in which to search, so I'm just asking here. Anyone know a good way of unlocking the FSB speed feature?

MSI recommends using their 'live update' program to upgrade the bios, but I guess they also offer using a floppy as an option. The problem is that I found a couple sites with the BIOS but both had dead download links. Is there another site I can search at?
http://drivers.softpedia.com/get/BIOS/Msi/MSI-915GVM3-V-11.shtml
http://www.techspot.com/drivers/driver/file/information/7459/

Need new bios for r9 270x

Hi, I would like to request a new bios for my 270x
S/N 602-V303-070B1404003989

where is it located on the card? I cant find the current version in windows because my screen doesn't display because the card doesn't work... I think its v303 ver:1.1

Need newer bios for sr1710nx

hi I have a hp compaq presario sr1710nx I am runing bios for the hp site (01/25/2007 rs482-sb400 amberine-00)
i need to find a newer bios becouse fo video probloms can any one help ?

Here are the specs for your Compaq Presario SR1710NX Desktop Computer and its A8AE-LE (AmberineM) motherboard. According to the specs, this model was introduced for sale on or around 27-Nov-2005. The most current version of the BIOS for this model is A8AE-LE BIOS Update v3.15 2007-11-30. This update doesn't indicate that it resolves issue with video problems.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Challange to MSI.. New BIOS for the K8T that supports CoolNQuiet

Similar Messages

Maybe you are looking for