Challenge:  Adding ports to A1034 (Airport Extreme)? Here are the pieces.

Okay, I've got THREE A1034 Airport Extremes (the ones that look like a discus) and ONE DLink 4-port router. The two Macs only seem to coexist on the Airport Extreme; one always gets bumped when both use the DLink.
Challenge: Using these four routers, is there a way to get more multiple wired ethernet port available to me? I want to plug in a DVR and a Slingbox and I'd like to, for the time being, not buy yet another piece of equipment.

select Airport extreme, click modify, then network then change the router mode to DHCP and NAT, then add your ports in the ports section.

Similar Messages

  • Can I connect a device to get added LAN ports for my Airport Extreme?

    Can I connect an added device to my styetem to get added LAN ports for my Airport Extreme Router system?
    Mark Edwards

    Connect a Gigabit Ethernet switch to any of the 3 Ethenret ports on the AirPort Extreme to add as many ports as you need.
    Switches come in 5-port, 8-port, 16-port, etc versions.
    Your local computer/electronics superstore will have what you need.

  • Apparently I need to open several ports on my Airport Extreme to be able to chat on Xbox One.

    Can anyone tell me how to open ports Here are the ports I need open:
          88 UDP
         3074 UDP and TCP
         53 UDP and TCP
         80 TCP
         500 UDP
         3544 UDP
         4500 UDP

    select Airport extreme, click modify, then network then change the router mode to DHCP and NAT, then add your ports in the ports section.

  • How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

    As the title suggests...
    I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer.  (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding  only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time. 
    How do I do that on an AEBS?
    In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines? 
    TL,DR version:  How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.  

    You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

  • How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

    How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

    OK. The 6.0 version no longer has a printer configuration that I could find. You might try Printer Sharing in the Sharing preferences.
    I would also check the printer's user manual for help with the setup, and that failing check the manufacturer's website and/or tech support.

  • How can I open ports on my AirPort Extreme, from WINDOWS?

    I have an Airport Extreme as my router, and I have a Windows-based computer. I need to open ports on the router (ironically, it is for my Apple TV).
    However, even though I can use the Airport Utility for Windows (latest version 5.5.3), I cannot open ports from the application.
    Everywhere I look, I am supposed to have a firewall tab in the Advanced section, but I do not have it. The only tabs that I have in Advanced are:
    Logging and Statistics
    MobileMe
    IPv6
    How can I open ports on my Airport Extreme router from Windows?

    Is your AirPort Extreme the only router in your network configuration?

  • How do I forward a port on my Airport Extreme? I have a Belkin @TV (it's like a sling box), and to watch it over cellular on my iPhone I need to forward the port 49177 in the router settings.

    How do I forward a port on my Airport Extreme? I have a Belkin @TV (it's like a sling box), and to watch it over cellular on my iPhone I need to forward the port 49177 in the router settings. A simple set of instructions would be greatly appreciated.

    How to Port Forward on AEBS

  • Would love help adding wired iMac to Airport Extreme.

    Hello. I have found answers to many questions on this board, but I finally have to ask one myself.
    I know that it is possible to have two macs (iMac and MacBook Pro) connect to the Airport Extreme, one wirelessly and one wired (via one of the LAN outputs). I currently have both connecting wirelessly. Everything works great, but since going wireless the functionality of my trading website has deteriorated. It’s not allowing me to connect to real time quotes and charts. They tell me I need a wired connection. Not sure I believe them because it did work for awhile, but…
    So I want to set up my iMac to be wired. I’m reasonably sure of the first step - I need an ethernet cable to connect the iMac to one of the Airport Extreme’s LAN ports. I assume there is more to it than this, but I’m unsure of the next step. I expect that there might be some reconfiguring of the Airport Extreme, but maybe not. For the wired iMac, would I turn AirPort off and connect as I used to (via PPPoE) before going to a wireless connection?
    I have the Airport Extreme connected to a Spreadstream 5100 DSL modem through AT&T.
    Thanks in advance for any assistance.

    I need an ethernet cable to connect the iMac to one of the Airport Extreme’s LAN ports. I assume there is more to it than this, but I’m unsure of the next step
    1) Connect an Ethernet cable from the iMac to one of the LAN <-> ports on the AirPort Extreme
    2) Click the fan shaped Airport icon at the top of the iMac's screen and select Turn AirPort Off
    3) Connect to the Internet

  • Opening a port issue: I Need to open a port in an airport extreme.

    I Need to open a port in an airport extreme, but I'm connected through an airport express in bridge mode.  I need to access a specific computer inside my network through that port to be able to use it as a server.  I can't seem to find the correct way to set everything up.  I've tried opening the port and everytime I check it through telnet or any open check tool on the net it keeps saying the port is closed.  I'm stumped.

    After digging around it looks like Snow Leopard doesn't use ipfw for opening ports.
    Does anyone know how to open ports in Snow Leopard? Apple don't seem to have any info on this - besides the allow incoming connections for certain applications.
    Will try WaterRoof and see what happens.
    Cheers
    Ben
    Message was edited by: Ben Sciascia

  • What is the most sensible way to extend a wifi signal. I am in a cinderblock house and I have to buy something that will give me a single network but added range from my airport extreme base station.

    What is the most sensible way to extend a wifi signal. I am in a cinderblock house and I have to buy something that will give me a single network but added range from my airport extreme base station.

    Use an Airport Express. Configure the AEBS to allow it's wireless network to be extended. This is a dropdown menu option under the Wireless tab. Configure the Airport Express to Extend an Existing Network also under it's Wireless tab. You will need to provide the name of your network used in the AEBS as well as the network's access password.

  • Does anyone repair Airport Extremes? Save the landfills!

    The ethernet WAN port of my Airport Extreme 802.11n stopped working, and the unit is out of warranty and not covered by AppleCare. I really don't want to just toss it to the landfill, but Apple only offers a refurb-replacement option ($130, with 90 day warranty, so $50 more and I can get a new one with one year, or somewhat less through a company discount).
    Anyone know of a place that works on these?

    Since I have to use WEP (not really secure) on my network in order to allow some older devices to connect, I have also enabled MAC Address Access Control (also not secure) to at least be able to prove that any unauthorized access is not accidental.
    The predecessor to Airport Utility allowed me to save the MAC address list to a file also, but that seems to be a missing feature now. I rummaged in the saved .baseconfig file and saw no hint that the access control list is in there. There isn't even a binary element that's big enough to be hiding it.
    Do I have to copy down the MAC ACL manually? And re-enter it manually to restore it?

  • Is the current version of AirPort Extreme better that the version I purchased two years ago?

    Does the current Airport Extreme have better
    range than the one I purchased 2 years ago?

    Not in regards to range.
    If you have a new Mac purchased in the last year or two, you may get a bit faster connection on the 5 GHz band if the computer is in close proximity to the router.
    If you need more range, you will do better by adding an AirPort Express or another AirPort Extreme to "extend" the wireless signal of your current AirPort.

  • The airport utility software running on Windows7 is not able to find my airport extreme. Bute the wireless connection is working.

    I have a stable wireless connection between my Laptop with Windows 7 and the airport extreme. But the airport utility software cannot find the air port extreme. The problem now is that I cannot install my printer which is connected via USB to the airport extreme. Can somebody help? thx

    Try this Web page. These steps helped me. Hopefully this link works for you.
    http://books.google.com/books?id=-yhGNt6fqkIC&pg=PT301&lpg=PT301&dq=%22For+Print er+Name+or+IP+Address+you+have+two+choices,+depending+on+whether+the+Windows+mac hine+is+connected+via+Wi-Fi+or+Ethernet+%22&source=bl&ots=q7h6Uvih-B&sig=XJOXFo9 yZmhRW6PPDafOKc4QywQ&hl=en&ei=C3DKTqOqE4S3twf7wJjNCw&sa=X&oi=book_result&ct=resu lt&resnum=1&ved=0CBwQ6AEwAA#v=onepage&q=%22For%20Printer%20Name%20or%20IP%20Addr ess%20you%20have%20two%20choices%2C%20depending%20on%20whether%20the%20Windows%2 0machine%20is%20connected%20via%20Wi-Fi%20or%20Ethernet%20%22&f=false

  • HT1218 why is streaming to my TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP s

    why is streaming to my sony TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP service? Airport extreme software is up to date.
    please advise
    Michaelgfrommet

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

  • Just purchased an Airport Extreme , what´s the difference between LAN and WAN

    just purchased an Airport Extreme , what´s the difference between LAN and WAN

    Check the Setup Guide for the AirPort Extreme to confirm that the WAN port accepts the signal from your modem or from another router on your network.
    Other Ethernet devices on your network connect to the LAN <-> ports.

Maybe you are looking for

  • How can I change the font of the titles in a JTabbedPane

    Hi I use a JTabbedPane in a project and use windows LookAndFeel. I want to distinguish the selected Tab titels by changing the font of the title. Is there anybody who can help me. I can not find any component used as the title. They are only there wh

  • Configuring the SOAP Adapter

    Hi Folks, I have a sceanrio where an AXIS client needs to talk to the XI SOAP Adapter. How do I configure the SOAP adapter? I tried to access the help docs for configuring the SOAP adapter. I understand that the adapter depends upon the plain J2SE Ad

  • HT201335 can you control video from computer when you airplay

    I just added Appletv and connected my Computer and TV. I now see my TV but how do you control your computer from your tv or maybe you don't the remote does not do anything pertaining to the computer i see on the TV

  • Trouble Opening PDF

    the past few days I have been getting a message  "there was an error opening this document.  The file is damaged and could not be repaired." But when I go to another computer - I can open the same file?

  • Sort by more then fields

    Hi all, I need to sort a collection of objects by more than one field. Example : Classs Foo{ private int id; private int description; private Date statusDate; I would like to sort a collection with this objects by description then statusDate. How mak