Change a node on a Cost Center Group

Dear experts,
Is there any way to change a node on a cost center group (KSH1) ? i also would like to change the description!
Any tips?
Thank you in advance..
leandro.

Click on the node and Click on the Wand Buttion (Select:Shortcut F9)
and there you can delete and change the place of the group. Dont think you can change text. For that you may have to create the node again.
Thanks
Naveen

Similar Messages

Mass change of profit/cost center groups

we have a requirement to mass change the descriptions for profit/cost center groups. We tried out folowing options but they are not working.
1. BDC recording for KCH2/KSH2.KCH5N - i think these are not supported in BDC.
2. LSMW using available BAPI... it can be used only if the group is not assigned in the hierarchy.
Please let me know if there is any other way of handling this.

Have you seen note 314528 ?
Rob

Function module for Profit Center group and Cost Center group changes

All,
The requirement is to change the profit center group and cost center group from one node to another. Please remember it is trying to simulate the transactions KCH5 and OKEO programatically.
I would like to know if somebody had this requirement previously and had made use of some function module or some other technique which will help in changing the standard hierarchy nodes.
Help is much appreciated.
Regards,
Hari

All,
The requirement is to change the profit center group and cost center group from one node to another. Please remember it is trying to simulate the transactions KCH5 and OKEO programatically.
I would like to know if somebody had this requirement previously and had made use of some function module or some other technique which will help in changing the standard hierarchy nodes.
Help is much appreciated.
Regards,
Hari

Change in the cost center group

Hi,
Can we change the cost center from one cost center group to another group, when there are some postings in the cost center? If yes, how to go about it?
help me out

Yes you can!
If you are planning to change within the standard hierarchy, Goto OKEON, drag, drop and save.
Or you can go to KS02 for the cost center, in the basic data, you can give the new cost center group under the hierarchy area.
If it is just non hierarchy cost center group, then go to KSH2 enter the old group, select the cost center, delete save, then go to the new cost center group and include the cost center.
It does not matter whether it has been posted or not. It is just a grouping. But caution must be exercised. and there shall be a valid justification for doing so. Because the cost center may be used in various cycles. So better to check where and all the cost center is being used and then do the change.

Change Cost Center Group - Error

Good day all
We are trying to change the cost center group for a cost center. We get the following error message:
"Change range must cover complete existance period".
How do we fix this?
Thank you in advance.
Kind regards
Lu.

Pls check if there is any data, which has been posted to this particular Cost center
Regards
Sanil Bhandari

Cant change COST CENTER GROUPS and/or Standard Hierarchy

Hello all,
im facing some problems during change of COST CENTER GROUPS and/or Standard hierarchy.
When im trying to select im getting following error Value maintenance not allowed ->Standard Hierarchy
When i do get the selection of the cost center that i want to remove from the hierarchy im getting this error Function is not supported in the standard hierarchy.
I dont know anymore what to do.
ive searched in forum and google but still didnt find enything usefull.
Regards
Laurynas Prikockis

Hello,
There is no word called removal in SAP. It would have been properly pronounced if say "Delete".
In case of delete, I do accept, there should not be any planned or actual line items during the fiscal year. If there are any actual or planned lines items you cannot delete the cost center during that period.
However, you can still delete the cost center in the next fiscal year if there are no actual or planned line items.
Hope this makes clear.
Regards,
Ravi

Get Name for CO Cost Center Group and BGD Processing

Hi,
I use these function modules to get the cost center group nodes in the CO hierarchy.
If I pass it a value that is in two controlling areas
if prompts another screen to pick which controlling area we want to look in. My problem is when I try to run this report in the background it gets hung up on this screen waiting for input. any ideas on how to get around this.
here is the reference code.
thanks
Please note that the following logic is parts of SAP example report
RGSEX001.
Get the internal Set-ID from the external name of the set
Selection of sets can be restricted to a specific set class or
to sets matching a specific table field.
See documentation of function module G_SET_GET_ID_FROM_NAME
If the set class, subclass and setname is known, function module
G_SET_ENCRYPT_SETID should be used alternatively (see RGSEX020)
    CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
         EXPORTING
              shortname = w_set
              old_setid = w_setid
         IMPORTING
              new_setid = w_setid.
Read the complete hierarchy (set and all subsets)
    CALL FUNCTION 'G_SET_TREE_IMPORT'
         EXPORTING
              setid              = w_setid "Set-ID, not the Setname!!!
              no_table_buffering = ' '
         TABLES
              set_hierarchy      = it_hierarchy
              set_values         = it_values.

Hi!
For reading cost center hierarchy you can try K_HIERARCHY_TABLES_READ.
It returns near the same info as one you've mentioned, works well for single controlling area and I hope in case of ambiguity it will raise one of exceptions provided. Give it try.
Regards,
Maxim.

Cost center group language in report

Dear all,
In the Cost centers: Actual/Plan/Variance report (S_ALR_87013611), for one cost center group the description language of the accounts has changed from ES to FR. Unfortunately I am not able to understand why.
How can I switch the language to ES as before? This issue happens only in our Productive system. In Dev & Quality the language is correct.
Many thanks,
Annabelle

Hi,
How do you solve the problem?

Function module for custom report for cost center group

Hello all,
I wonder, if there is any SAP function module for following query:
We have got a custom program, which evaluates cost centers. We would like to evaluate a cost center group, like it is available within the report painter - the output screen is splitted into two parts, on the left part there is the cost centre group hierarchy and on the right side, there are the values for the node, which is selected within the hierarchy.
Is there any standard function module od do we have to program it ourself?
Thanks in advance

Hi Peter,
You have a BAPI which gives you the details of cost centre group, if this is what you are looking for:
BAPI_COSTCENTERGROUP_GETLIST
Regards,
Eli

Loading Cost Center Groups

Has any one loaded cost center groups with heirarchies using LSMW ? I have an excel spreadsheet listing cost center groups with heirarchy levels. This sheet is to be used as input file for LSMW. What is teh best way to handle this project ?
Thanks in advance

Thanks Ravi for your prompt response.
Does this BAPI create the lower heirarchies also ?
I will need to create all the nodes in the heirarchy and I have more than 3 heirarchy levels for every group listed in the spreadsheet.
Manoj

Extract expense for a designated cost center group

Hi,
There is a problem that we want get expense for a designated cost center group instead of cost center and store in the cube. We can get the cost center group but it is a node in a hierachy. I don't know how to map cost center to it's group.
Thanks in advance.

>
rahul dsnr wrote:
> Hi,
> Thanks for ur reply, but those FM's are not providing Cost center group for a cost center.
>
> Can u provide me a better solution to find cost center group for a cost center.
>
> Regards,
> Rahul
Do you mean that you want to read the cost centre group hierarchy for a cost centre? So that instead of entering a cost centre group and reading down the hierarachy until you get to the cost centre codes at the bottom, you want to enter a cost centre and then read up the hierarchy until you get to the cost centre group at the top of the hierarchy. If so, I don't think there is a function module to do what you want. The cost centre group hierarchy data is held in table SETNOTE, so you could have a look at that.

Cost Center Group and Profit center Group

Hi All,
The Client is requested to have Cost Center Group in the CO reports. I have trying to analyse how to get Cost center group in the report or Info Provider.
When i went to T-code KS03 in ECC ( Display Cost Center), i get the Hierarchy Area field called KHINR, which shows the Cost center grp. Upon discussing with Functional person, he has told that this Field lies in Table CSKS (Cost Center Master).
Now i am thinking to enhance the Cost Center Attribute Dsrc. with this Field KHINR.
I just want some suggestions or advice on how to bring Cost center grp and Profit center grp
Thanks and Regards
Edited by: Raihaan Khan on Dec 12, 2008 3:35 PM

Hello Simon, Thanks again for all your FICO resolutions.
Yes i truly agree that Cost Center Grp is CostCenter Hierarchy,, but i dont understand, y the Client has told that he needs the field KHINR in the Cost Center Report too.
Actually he wants Cost Center Group wise report and NOT Cost center wise report.
I have thght of extracting the Complete Std Hierarchy to 0COSTCENTER and then in the report , i can give a Cost Center Hierarchy Variable(probably a selection screen), such that the User can select the Nodes he want and then drill down the CostCenter Groups to see his respective Cost center accounting.
Please opinionate on this
Thanks

Authorization on cost center group

Dear all,
I have to set up authorizations for reports (e. g. S_ALR_87013611) based on the cost center group (means the user should only see data of cost centers which belong to the cost center group he is authorized for).
I think this should be possible via the authorization object K_CCA (field RESPAREA) but it just worked for entries in 'Cost Center' and 'Authoriz.Hier.' but not for 'Cost Center Group' (that's what I would need).
Has anyone an idea how to solve this?
We are running ECC 6.0.
Thanks in advance!
Regards
Harald

Hi,
The relevant authorisation objects are as follows:
K_CSKS_SET: This will allow display/change/creation of groups based on activity selected.
K_CCA: This is a general authorisation object (relevant activites should be 0003, 3027, 3029). You are obviously trying to run a report. For running a report the relevant authorisation object is K_REPO_CCA, which sadly does not have cost center group as a selection, only cost center values and ranges.
However, K_CCA will work, if the cost center group that you have entered in the authorisation is also present in the standard hierarchy. Can you test this, enter a cost center group from the standard hierarchy and not just any group that you have created seperately. The authorisation should get restricted to that group.
Cheers.

How to find the cost center group from cycle/ segment in CO module?

Hi All,
I need to fetch the list of cost centers in the cost center group against the cycle.
Is there any table which will store the list of cost centers against the cycle?
or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
Regards,
Mrunal

FM: RK_AL_CYCLE_READ
CHECK TABLE: T811K

How batch append cost center group to standard hierarchy by batch

Hi Guys,
Would you please tell how me how append cost center groups to standard hierarchy by batch, every time I have to do it one by one, is there a convenient way? thanks.
Best Regards
FS

Hi,
You can create any number of cost center groups as per your requirement.
But one thing is crucial. If you crin your eate the groups using the T Code:OKEON. those will effect to the standard hierarchy.
Cost centers created wil KSH1 will not effect to standard Hierarchy.
Main point here is the main hierarchy should be maintained in OKEON. Later you can add any number of groups to that. LSMW will work, before that Hirarchy Area(Cost center group) should be maintained in the system for effective work of LSMW.
Regards,
Pavan Kumar Arvapally

Change a node on a Cost Center Group

Similar Messages

Maybe you are looking for