Change access connections from prompt username/password to use windows logon credentials

Hi,
Switch our wifi to intergrate it with Active directory.
Is there a way to seamlessly switch access connections from prompting username and password to use windows username and password for all our laptops?
Thanks

neoluu wrote:
Hi,
Switch our wifi to intergrate it with Active directory.
Is there a way to seamlessly switch access connections from prompting username and password to use windows username and password for all our laptops?
Thanks
Yes there is a way to do it, however we cannot help you without knowing the OS and version of Access connections.

Similar Messages

Access Connections - Use Windows Logon grayed out

I have seen multiple posts on this, but no solution. I am trying to configure acconn for PEAP, but in the user credential section, the Use Windows Logon is grayed out. I have tried reinstalling and checking off the box on the install, still no luck. Lenovo had me reload the laptop to factory, but that didnt help either.
Suggestions?
Ron

Ok, are you logged on the system as having Admin privileged? If not, then you can't change the Global Settings.
I strongly suggest not deleting registry entries. mgtitchenell mostly had it right, but instead do this:
Go into Global Options in Access Connection, uncheck it, click OK and restart, then go back in and check it, click OK and restart.
After this - the option should no longer be grayed out.
If that doesn't work, then the problem mostly likely comes from some other GINA installed on the system that Access Connections doesn't recognize. Look back at the registry entry (HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon) and look for an entry that either has the word GINA mixed up in it, or that points to some file that end in .dll
Disk encryption software and some VPN programs put in their own DLL (or things like Novell Netware client)

How do I access the music from my Mac drive while booted into Windows?

How do I access the music from my Mac drive while booted into Windows via Bootcamp? I tried using MacDrive but it's not supported for Vista 64-bit edition. Is there another program out there that I can use? I just want to be able to access my music that's on Leopard while in Vista. Any advice will be much appreciated. Thanks in advance.

Your best bet is to move the music on the Windows side since Leopard will be able to read and play the music from the mounted Windows drive (Leopard will not be able write anything to the Windows NTFS partition).
In your case it won't work the other way around.
Axel F.

I am unable to read signatures on PDF files sent from my Los Angeles office - they use windows, any solution?

I am unable to read signatures on PDF files sent from my Los Angeles office - they use windows, any solution?

Hey guys,
So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
Aaisha

Newly installed Acrobat will NOT open from Creative Cloud app on Desktop using Windows 7 Pro - what's the problem?

Newly installed Acrobat will NOT open from Creative Cloud app on Desktop using Windows 7 Pro - what's the problem?

the cc desktop app is used to install and update cc programs (and a few other thinigs). but that does not include 'opening' the installed programs.
click your start button or your program files directory to find the acrobat executable to launch acrobat (and any of your other apps, adobe or otherwise).

How can I transfer all my bookmarks from my old firefox browswer bookmarks using Windows Vista onto my new Windows 7 desktop?

I just purchased Windows 7 OS and replaced Windows Vista on my desktop PC.
When I open a new firefox browser, none of my bookmarks from the older browser running under Vista is showing anymore.
Can I still transfer all my old bookmarks fromVista onto a new browswer using Windows 7 then?

Just a note about the difference between these two things:
* "export" and "import" use an ancient HTML document format that all browsers can understand. When you import bookmarks, Firefox may place them into an Imported Bookmarks folder, or into Unsorted Bookmarks. This does not displace existing bookmarks, and Firefox does not automatically remove duplicates.
* "backup" and "restore" use a more comprehensive JSON data file, which contains extra information about your bookmarks (such as tags) not contained in the traditional export file. HOWEVER, a restore completely replaces all existing bookmarks, so the restore feature cannot be used to merge in a set of additional bookmarks.
Related support articles:
* [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
* [[Import Bookmarks from a HTML file]]
* [[Restore bookmarks from backup or move them to another computer]]
Some users find the disk-based Windows Favorites folder a convenient way to organize bookmarks. If you do, too, and you do not need to preserve tags on your bookmarks, you could export each profile's bookmarks to HTML and import them all into IE11. Organize them in the Windows Favorites folder, then export from IE11 to HTML and import that file into each Firefox profile. See: [http://windows.microsoft.com/en-us/internet-explorer/add-view-organize-favorites].

Change access to workflow from command

Is it possible to change the access to a workflow from a command instead of Server Admin GUI? I am trying to script the creation of workflow but only want the workflows seen by a group of users. I want to be able to in my script to create the workflow to add the group to that workflow in Server Admin - Podcast Producer so that I don't have to touch every workflow that is created.
I have come across the serveradmin command but it requires way more information than I have in order to setup the group to have permissions to the workflow.

Gavin,
There is a script wfuignt.sql which created the public synonym. You will have to grant execute privileges to the schema which is calling the engine APIs.
Cheers,
Raja

Does changing report connection at runtime require the same user/pwd used at design time?

I've recently integrated Crystal 13 into a web service to provide HTML reports served up within our web application. Sometimes reports would work and other times they would fail when attempting to connect to the database. The ConnectionInfo associated with the tables referenced in the reports bore the account info used at design time (in the Crystal IDE), what ever connection was set as the Datasource Location, this would include the server name, database name, and other attributes of the connection.
I found that any changes I make to table, sub-report connection info have no affect unless the UserID and Password match the UserID and Password saved with the report during design time. While generally searching online, I came across several references to this being and issue or suggestion when database connection problems dynamically running reports.
If this is by design?
How would I support customers who want to use my reports, but also require that they manage the db access accounts?
Thanks,
Jeff

Hi Brian, thanks for the response.
It does make sense that subreports would not necessarily be constrained to the same connection as the container report, and the designer would not persist a password for any stored connection.
I'm on Windows 7 and up, Crystal 13 runtime, C# web service, sql 2008 r2 and up (native client).
After loading the report source, I call ReportDocument.SetDatabaseLogon to set userId, password, serverName, and databaseName pulled from web.config. I then pass the connection info and the ReportDocument to a recursive call that applies the connection info to each table in the report and each table in any subreport.
Based on your description, it sounds like I may be missing, and require, the SetDatabaseLogon call on each subreport (ReportDocument).
This seems to ring true and I think coincides with your description. Would you agree?
Thanks,
Jeff

Unable to open connection to MS Access 2013 .accdb file Under WCF Web Service Project Using Windows 8.1 64bit

I am encountering the following error when trying to connect to an Access 2013 database:
The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine.
I have Visual Studio 2013 SP3 running on Windows 8.1 64bit OS which also has Office 2013 installed (which includes MS Access 2013). My project is a WCF web service using .NET Framework 4.5.1 using any cpu as target. I have tried reluctantly
to install the older drivers as described by in the below article:
https://social.msdn.microsoft.com/Forums/en-US/1d5c04c7-157f-4955-a14b-41d912d50a64/how-to-fix-error-the-microsoftaceoledb120-provider-is-not-registered-on-the-local-machine?forum=vstsdb
and also went through the "Add Data Source" wizard in the Project menu to have the connect string automatically built. Even with the automatically built connect string I can not connect to the .accdb file from within my WCF web service.
What's odd is if I use the Database Explorer in Visual Studio it has no problem connecting the my Access file. I inspected the connect string and tried to use it as well but still get the same error. Even stranger is that I have no problem connecting
to the Access DB in an ASP.NET project on the same PC. I am also able to connect to the Access file using a simple Windows Forms application. So I'm wondering if it has something to do with trying to connect to the Access file from a WCF web service
project.
What I'd like to know is if anyone has been able to get this to work in an environment as I described above as a 64bit WCF web service project? I tried to switch my project to 32bit but when I do I get a different error which reads:
System.BadImageFormatException: Could not load file or assembly 'file:
Almost to the point of trying to get this web service project done with SQL Express but would like to know if it can be done with MS Access 2013. Any information anyone can provide to help me get past this issue is greatly appreciated. Thanks.

Have you installed the 64-bit Access driver on your machine? See
Data Source Names and 64-Bit Operating Systems for the differences in odbcad32. Call %SystemRoot%\system32\odbcad32.exe to check the drivers.
How do you host your service? Stand-alone or IIS or embedded to another application? Keep in mind that IIS7 runs it in its application pool which is defaullt 64bit. Thus the bad image exception, when compiling your service as 32bit.
When you need the Access database for your service to store informtation, then I would switch to SQL Server (Express) or XML files depending on your actual needs.
Also check whether your account under which your service is run has the necessary NTFS file permissions on the access file and the folder. This is getting even more complex when it's a remote folder.

Ifs Connection problem from local machine to Ifs server using API

I am trying to make an API call to connect to Ifs database server running on different machine(UNIX) from local machine. I copied all jar files and /Lib/Ifs/Settings directory to my local machine. All these files are in the classpath of weblogic 6.0 environment. A jsp on weblogic server call a bean which has a responsibibility of connecting to Ifs server to get LibrarySession.
From Visual Cafe 4.5 everything works fine but when i start weblogic 6.0 outside the visual cafe environment i get the error
below. I included all the jar files and /Lib/Ifs/Settings in start up script of weblogic server
Do you know if i missing some thing????
java.lang.UnsatisfiedLinkError: do_open
at oracle.jdbc.oci8.OCIDBAccess.do_open(Native Method)
at oracle.jdbc.oci8.OCIDBAccess.logon(OCIDBAccess.java:309)
at oracle.jdbc.driver.OracleConnection.(OracleConnection.java:198)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:251)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:224)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:177)
at oracle.ifs.server.LibraryConnection.(LibraryConnection.java:235
at oracle.ifs.server.ConnectionPool.createLibraryConnection(ConnectionPo
ol.java:576)
at oracle.ifs.server.ConnectionPool.(ConnectionPool.java:321)
at oracle.ifs.server.S_LibraryService.(S_LibraryService.java:912)
at oracle.ifs.server.S_LibraryService.startService(S_LibraryService.java
:1129)
at oracle.ifs.beans.LibraryService.connectLocal(LibraryService.java:408)
at oracle.ifs.beans.LibraryService.connect(LibraryService.java:280)

Have you installed the Oracle client software on the machine where you are running WebLogic and your custom iFS application (your bean)?
It looks like the native JDBC libraries are not available to the JVM where WebLogic is executing your code. iFS uses JDBC to access the Oracle database, and it requires "thick" (OCI8) JDBC to do so. This means that you need Oracle client software to be installed (in an ORACLE_HOME directory) on a computer where you want to use the iFS API.
If you do have the Oracle client software installed already, then perhaps the WebLogic environment isn't configured to have access to the native JDBC libraries. Normally, as long as $ORACLE_HOME/lib is in the LD_LIBRARY_PATH (on unix) or $ORACLE_HOME/bin is in the PATH (on windows), stuff should just work.
See if you can find any information about including native libraries (for instance, to use JNI) in the WebLogic documentation. We don't certify with WebLogic, which is why I don't know the answer offhand.

When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

HT5858 how can i change my payment method from billing my credit card to using an itunes card ?

How can I change from using a credit card to purchase music to using an i tunes card?

Just redeem the card into your account. The balance on the card will be used before ht card is charged..
iTunes Store: How to redeem a code

Cannot connect to Exchange server (Small Business Server 2008) using Windows 8.1 and Outlook 2013

I am at my wits end. I have got a new PC running Windows 8.1 and Outlook 2013 simply WILL NOT connect to my work Exchange server. The REALLY annoying thing is that the Windows Mail client inbuilt to Windows 8.1 works perfectly! But I have to have Outlook
for the functionality. The issue appears to be that in Outlook 2013 on Windows 8.1, it tries to be clever and auto-detect the settings whereas Windows Mail allows you to input the server and domain names.
I have tried all the suggestions already on some of the boards - manual setup, etc - nothing works! Is it a compatibilityissue with SBS 2008 and Outlook 2013? Any help appreciated!

I am at my wits end. I have got a new PC running Windows 8.1 and Outlook 2013 simply WILL NOT connect to my work Exchange server.................... it tries to be clever and auto-detect the settings.
I have tried all the suggestions already on some of the boards - manual setup, etc - nothing works! Is it a compatibilityissue with SBS 2008 and Outlook 2013? Any help appreciated!
There's no issue with O'2013 connecting with Ex '2007. Also not clear about comments of "auto-detect" versus "....have tried all the suggestions ............ manual setup....". On the one hand your stating that only "auto-detect" is available and on the
other that you've tried "manual settings" (which definitely is an option in O'2013 for EX accounts).
This may have more to do with the fact that you're using a new computer trying to connect to the server which it may not be configured for - something your admin will need to address.
Given that your question is in reference to Exchange - you are likely to get a better/faster answer in the following forum which deals with Exchange server related questions:
Exchange Previous Versions - Outlook, OWA, POP, and IMAP Clients
http://social.technet.microsoft.com/Forums/en-US/exchangesvrclientslegacy/threads
Karl Timmermans [Outlook MVP] "Outlook Contact Import/Export/Data Mgmt" http://www.contactgenie.com

How to import Pics & Video from Iphone 4 to Laptop which uses (Windows 8) //

Attention Techies: Problem Memory on my Iphone 4 is full
Id like to download or import all my pictures to my laptop or Flashdrive ( only prolem is its an HP Latop which uses new ( Windows 8)
Any HELP is appreciated. No one seems to have a clue.
Its imperative that i save images for work and free memory on my iphone for business. Can anyone help with this problem. Thanks

I've tried to import like a digital camera and an iPod but it only seems to be trying to add more photos to my phone not taking them from it. Is there a way you could elaborate on how to do this?

HT201302 how to import photos from iphone 5 to my computer using Windows 8 ?

Can some one explain step by step how to import photos from iphone 5 to computer using Windos 8 ? thank you!

Plug it into PC and the iPhone should show up in "Computer" on PC then a simple matter of dragging and dropping
see here for details
http://support.apple.com/kb/HT4083

Change access connection​s from prompt username/p​assword to use windows logon credential​s

Similar Messages

Maybe you are looking for

Change access connections from prompt username/password to use windows logon credentials