Change activity calendar for ALL activities at once ?

Still new to P6, learning as I go...
I would like to change the activity calendar--for all existing activities in the schedule--and I would like to change it globally without having to go thru the sched line-by-line.
Is this possible?
I have this problem with other fields as well, such as Duration Type.
I will keep searching, but... all help appreciated.
Thanks.
Edited by: 929681 on Jun 14, 2012 7:10 AM

Thank you so much--that was a great idea!
I had attempted fill-down previously, but it hadn't worked (user error of course).
This time, I read about it in Help--so I knew what I was doing--and it worked like a charm :-)
Points to you--you have answered the question.

Similar Messages

  • Impact on roaming profile accounts if we Change User logon Name to Employee Number format in Active Directory for all User accounts

    I want to understand if we change User logon Name to Employee Number format in Active Directory for all User accounts, then what would be the impact on existing profile. Whether we need to change it manualy or it will connect to same profiles in terminal
    session.
    As i observed it create new profile after logon name changed to employee number where existing users profile settings get fails to load and prompt for new settings (such as outlook reconfiguration, share drive mapping etc.).
    Kindly let me know the proper process to overcome with this, how to connect same existing roaming profile with employee number format change.

    Hi,
    What if we change the user name of user account, will it have impact on roaming profiles.
    Yes, it will affect roaming profiles. Please rename the roaming profile folder as the new user account name, in addition, change the profile path in ADUC.
    Here is an related article below for you:
    How to Rename a Windows 7 User Account and Related Profile Folder
    http://social.technet.microsoft.com/wiki/contents/articles/19834.how-to-rename-a-windows-7-user-account-and-related-profile-folder.aspx
    Best Regards,
    Amy

  • How Can I Change Format Mask For All Fields that type's Number Depend on Parameter in Report Builder 10g ?

    I want Change format mask for all fields that type's number
    Such as
    if  :parameter_value = 1 then
       all fields format mask = ' 999,999,990.000' ;
    else
       all fields format mask = ' 999,999,990.00' ;
    end if;
    Regards

    So, i have bad news for you : you'll have to rebuild again.
    Meanwhile i have excellent news for you : there's an online tool made by Johannes Henseler called Sidecar xml which builds the necessary xml file for you, sort of what you find in the Digital Publishing Folio Editor website, but saves it in your Folio folder.
    Next time you import all your folder (with that file), it will place all the necessary information, and even reorder the articles.
    Build once, play many times.

  • Want to run compensation process for all employee at once.

    Dear All,
    I have created Compensation Adjustment which use an user exit to read employee appraisal and create the compensation amount.
    its working fine by this transaction code HRCMP0001C - Change .
    but i want to run for all employees simultaneously, and here on this transaction, its only one employee can be select at a time for compensation adjustment.
    any body hv any idea how to run this compensation process for all employees at once?
    thanks in advance

    there is one option available in Edit >Spreadsheet. but it giving an error.
    Error while generating document
    Message no. SOFFICEINTEGRATION141
    Diagnosis
    An internal error occurred in the SAP Document Container Control.
    Procedure
    If the error recurs, enter an error message. There are notes related to how to create a log file using the report SAPROFFICEINTEGRATIONTRACE.
    any body hv idea how to solve it?...thanks

  • Change read mode for all queries

    Hello, this should be an easy question for someone.  I believe there is a way to change the "read mode" for all queries at once.
    Can you tell me how to do that ?
    Thanks very much !!
    Keith

    Hello Bhanu,
    Iam not able to change query in my BW system but when i add authorization of SAP_NEW and SAP_ALL ,then iam able to change ,can i make modification in this table and then
    change or its a authorization problem.If this issue can be resolved with changing this table, kindly tell me how i have to call this table and wt parameters to change,kindly revert at earliest.I have sent u a mail also,kindly plz check.
    Regards,
    Saumya

  • HT5787 Change apple id for all purchased apps...

    I want to change apple id in my iphone as my old apple ID's password is not working. Please help me. I want to change apple ID for all new and old purchases.

    Have you tried logging out an back into that account on your phone (tap on it in Settings > iTunes & App Store), and/or tried getting the password reset for it : http://iforgot.apple.com (if you do get the password reset then you might need to logout and back into it) ?
    If you create a new account then that will work for new purchases, but all of your existing downloads will remain tied to your old account, so only your old account will be able to redownload those purchases and/or download updates to its apps.

  • How to migrate the calendars for all users?

    At work we have two Mac servers, both running Mountain Lion. I'm looking for a way to migrate the calendars for all the users from server A to server B. I've recreated all the users on the new server, as there are problems with most users on the old server.
    I've seen some topics covering backing up calendar data on the server and seen some PostgreSQL related, but nothing seems to apply to Mountain Lion. How do I create a PostgreSQL dump of the calendars? I know I will have to edit the GUID's to make it work on the new server. Or is it as simple as copying the data from /Library/Server/Calendar and Contacts/ to the same location on the new server?

    At work we have two Mac servers, both running Mountain Lion. I'm looking for a way to migrate the calendars for all the users from server A to server B. I've recreated all the users on the new server, as there are problems with most users on the old server.
    I've seen some topics covering backing up calendar data on the server and seen some PostgreSQL related, but nothing seems to apply to Mountain Lion. How do I create a PostgreSQL dump of the calendars? I know I will have to edit the GUID's to make it work on the new server. Or is it as simple as copying the data from /Library/Server/Calendar and Contacts/ to the same location on the new server?

  • How can I change view options for ALL playlists?

    How can I change view options for ALL playlists? With one single click or trick?
    I have a lot playlists and don't want to change every single one of them separatly.
    Thanks for your help. (I use Windows 7)

    There's no FAST way I know of, which is what I think you mean.
    Only the painful SLOW way of one-by-one.
    You could make a new playlist from the main library after you've set the columns up as you like.
    Go to an existing playlist that doesn't have the columns you want, and select all.
    RIght-click > Add to Playlist and send them to the new playlist.
    That's still one-by-one and only works with static playlists, not smart ones.

  • Can I undo the Ken Burns effect for all clips at once (instead of pulling up each clip individually)?

    Can I undo the Ken Burns effect for all clips at once in iMovie (instead of pulling up each clip individually)?

    Yes, you can select multiple clips then Adjust, Crop, click on "Fit".
    Geoff.

  • How can I change the duration for all clips in iMovie 10.2

    How can I change the duration for all clips in iMovie 10.2?  I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

    In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

  • Setting CUIC user permissions for all reports at once

    Hi all,
    We are using CUIC 8.0(4) Standard Edition and trying to set CUIC user permissions, such as Read, Exec and Write, for reports.
    If we need to give access to all reports then we should set permissions for each report separately.
    Is there any way to set those permissions for all reports at once?
    We attempted to set Read, Exec and Write premissions for the Reports, Stock and UCCE folders but no luck.
    Thanks.
    Nikolay

    Hi all,
    We are using CUIC 8.0(4) Standard Edition and trying to set CUIC user permissions, such as Read, Exec and Write, for reports.
    If we need to give access to all reports then we should set permissions for each report separately.
    Is there any way to set those permissions for all reports at once?
    We attempted to set Read, Exec and Write premissions for the Reports, Stock and UCCE folders but no luck.
    Thanks.
    Nikolay

  • How to change application action for all Firefox users?

    Hi,
    Is there any way I can change application action for all FF users. I am using Firefox admin 0.5.9.3 and deploy FF 3.6 through GP.
    Thanks

    You can change the system colors based on the system you are logging on to.  We have many users here doing that. (Red for prod, Green for Dev, etc)  You cannot use the Sap signature Design theme as it does not allow color changing.  I explained this in another post and how to change it.
    Re: Set Color for several system with sap gui 7.20
    To answer your question on how to change this for ALL users... That I cannot answer as our user base differs and they change it as they wish.  Hope this helps.
    Regards,
    Zecher

  • How do I set view options for all playlists at once?

    Hello,
    I want to able to set the view options for all my playlists at once (to include BPM, category etc). Currently you can only do this individually for each playlist.
    Surely there is an easier way?

    Moka.s-Onkel wrote:
    Now I have some questions:
    1. Is there a way of selecting multiple playlist in iTunes? And if yes, can I then change the view options for all selected playlists? How does this work?
    2. Is there any other way to apply view option settings to multiple playlist?
    1 - No
    2 - Using iTunes, no.
    However this script will do what you want .
    -> http://dougscripts.com/itunes/scripts/ss.php?sp=assimilateviewoptions

  • Organization Calendar for all applications

    Hi, it is possible to declare one time an Organization Calendar and refer it from each BPM process in the domain ?
    I ask this because it does not make sense to have a calendar for each process if all processes belongs to the same organization ...

    Hi Frank,
    We're still using your handy DBLoginModule. I don't see what would be changed in the java2.policy file to give everyone the RMIPermission and the jazn.jar app is remarkably unhelpful in assigning the perm to a role. Can you give a hint of what you suggest could be added to the java2.policy? Or some documentation with more info?
    Thanks!

  • Changing view permanently for all playlists

    Howdy!
    I'm going to ask this question again:
    How do I
    1. change the order of columns and the selection of columns in the playlist view;
    2. make the changes permanent
    3. have the changes include column resizing; and,
    4. make the changes effective for all playlists but only do it once?
    I don't need to see some columns and want to see others, and I want to see the same columns each time I open a playlist -- any playlist -- and I don't want to be continually fiddling with the column headers and sizes.
    Surely I can do that. I mean, this is an Apple product, right?

    Hello,
    AFAIK, 4. cannot be done, but the first three should happen automatically.
    Whatever you do to a playlist is supposed to stay that way.
    To reorder columns, just drag and drop, to select which columns you see, right-click the column bar and select.
    Hope this helps.

Maybe you are looking for