Change/Add new email domain name to my exchange 2010 server

My exchange server has a default email domain old.com
My company decided that they needed to start using new.com domain instead. is there a way to add a new.com to my exchange and manage (add/edit/delete) mailboxes [email protected]?
Thanks in advance

Hi,
Except with the above suggestion, we also need to add public A record about the name Autodiscover.new.com which points to your Exchange server IP address.
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

Remove Domain Controller role from Exchange 2010 Server

Hi team,
There is a client with Domain Controller (2008 R2) running together with Exchange Server 2010 SP3. However there were some huge problems with Exchange and DC therefore since the best practice is to keep those roles seperately, they are in need of doing so.
Can someone please suggest me the best approach? The server they use right now is with 16GB therefore whatever done, Exchange should be on that machine and DC on the other 6GB.
Option 01.
Both Exchange and DC are together
Install new Exchange on a temporary Server and move everything make that Exchange server the only working primary
Remove exchange from the DC server
Promote new Additional DC and promote it with FSMO and make primary
Demote the old DC from the 16GB server
Install Exchange again on the 16GB server and move everything from the temporary server
Or Option 02
Add new additionall Domain Controller server and make it primary with GC and FSMO
Run dcpromo to demote the old Domain controller role from where the Exchange Server too is installed
Once DC role is removed from the exchange server, set up DNS and perform a restart, so Exchange will identify the new GC and domain controller
Live happily ever after
Thank You,
Cheers!!

Adding/Removing the DC-Role while Exchange is installed, is not supported so forget about your Option 2.
Here's what I would do:
1. Install a new GC/DC (move FSMO etc)
2. Install a new temporary server for Exchange and move everthing over
3. Decomission the old Exchange Server
4. Demote the old Domain Controller
5. Install Exchange on a newly freshly installed OS and move everything over from your temp server
Martina Miskovic

TS4020 Can I change my iCloud email address name without creating a new account?

CCan I change my iCloud email address name without creating a new account?

Once you have created an iCloud account and chosen an @icloud.com address to go with it you can't change the address (short of creating an entirely new account).
However, all is not lost. You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

Primary email domain name change

We are going to be changing our company's email domain name shortly in order to make it shorter. We are running Exchange 2010, mostly Outlook 2010, on a mostly Server 2008 domain but still running in 2003 mode. We have a trust with a sister company
and until they upgrade to 2008 we cannot upgrade.
As an example we are changing our domain name from @microsoftcontoso.com to @contoso.com.
I am testing in my machine and set exchange & our spam filters to accept email from contoso.com. I also changed my primary email address to be @contoso.com. I tested to my personal email and my new emails are coming from the correct email address.
My issue lies in the fact that my Outlook client still shows my email address as @microsoftcontoso.com. If I create a new outlook profile on a new computer, it does show it as being just @contoso.com.
My question is how do I mass update everyone's Outlook in order for their Outlook client to show their new domain email address? My fear is people will get confused and think they have the wrong address.
Thank you for any help provided.

Hi,
Based on my research, group policy can help Outlook sync the new primary email address.
For more information, you can refer to the following similar thread:
http://social.technet.microsoft.com/Forums/exchange/en-US/aa15d1c5-5d28-4f72-b698-038c90264876/sync-outlook-after-changing-primary-email-addresses-on-exchange-2010?forum=exchange2010
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Internet Email Domain Name Change

Mangagement wants our email domain name changed because of it's length. Another government agency handles hosting for us now and can't change it for us. I have paid for a new name using a company on the internet and now have to switch it over. I see, in console one, that I can create a second name in Tools -> Groupwise System Operations -> Internet addressing and then set one of them to preffered. Can I do this and then set the new name as preferred? I would like to allow email that is addressed to the old email domain name to flow to the users for 30 days. Looks like I will need to change the foriegn ID in the gwia and also the name in the internal groupwise domain properties. Is there anything else that needs to be done? Is this the best way to do this? Thanks

On 7/30/2012 3:36 PM, dgonnse wrote:
>
> Mangagement wants our email domain name changed because of it's length.
> Another government agency handles hosting for us now and can't change
> it for us. I have paid for a new name using a company on the internet
> and now have to switch it over. I see, in console one, that I can
> create a second name in Tools -> Groupwise System Operations -> Internet
> addressing and then set one of them to preffered. Can I do this and
> then set the new name as preferred? I would like to allow email that is
> addressed to the old email domain name to flow to the users for 30 days.
> Looks like I will need to change the foriegn ID in the gwia and also
> the name in the internal groupwise domain properties. Is there anything
> else that needs to be done? Is this the best way to do this? Thanks
>
>
assuming there's no po/user/domain overrides of IA settings, that should
work ok.

Change or add a NetBIOS Domain Name

We have a current 2008 R2 level domain, for example example.domain.com and we need to migrate to a 2012 level example.test.com. Currently example.test.com does not exist. example.domain.com currently has a netbios name of example. Is there
a way to get the new domain setup to use the same 'example' for the netbios of example.test.com? Or is it possible to setup a new domain without a netbios name or to change it at a later date? The current example.domain.com does have Exchange 2010
on it and we would need Exchange at least 2010 on the new domain. I've read a lot about having to rename the domain to change the netbios domain name, but I wasn't sure if that is something that could be left blank so that we could setup a netbios name
to 'example' once the older domain is turned off.
To sum up. We currently have example.domain.com that users log into using example/username and we would like to have example.test.com setup to be logged into using example/username.
Thanks for you help and let me know if any of this is clear or if you need further explanation.

You can create a new domain using the same NetBIOS name as the first one. However, if you do that there will be no way to create a trust relationship with the first domain unless if you rename it. Here, renaming a NetBIOS name is not supported for Exchange
Server. More details here: http://technet.microsoft.com/en-us/library/cc738208(v=ws.10).aspx
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Update email domain name

Hi i have OIM 9.1.0 environment.
Any one please help me, because this very high importance task.
I want update email domain name using task scheduler in oim User form.
Ex: i have three users in OIM USR table with email id's:
1. [email protected]
2. [email protected]
3. [email protected]
I want update whose mail id domain is "@hotmail.com" with @gmail.com
I want display out put like:
1. [email protected]
2. [email protected]
3. [email protected]
for that you can use API's or what ever. Finally we run the scheduler at that time domain will update with new value in User form (USR_Table).

Hi Pandey,
Really thank U for your responses. I want to do this task, through schedule task using java code. So could you please help me for write java code.
write a java code:
- Retrieve all users in a tcresultset.
- Iterate through each record.
- Extract email, chain domain, form new email.
- Extract user login and using tcuseroperationsintf change email for that login.
- End iteration.
Could you please send me the code ASAP. Send me the total java code, because i am not expert in java.
Thanks

Changing AD Domain name with Microsoft Exchange 2013

Hello everyone,
we need to change our Active Directory Domain name from .local to another naming convention.
We are running a Windows Server 2012 R2 environment with Exchange 2013.
- Domain Controller
- File Server
- Exchange 2013
Running on a VMware ESX Host.
What is the applied way to change the Domain name? Or is there no way to change in the running Forest and we have to re-setup everything?
Thank you for your answers.
Regards,
Sebastian

Hello,
You need install new Exchange server in your new enviroment (forest).
Please read this link:
Prepare mailboxes for cross-forest moves using the Prepare-MoveRequest.ps1 script in the Shell
Other nice article:
Moving to a new forest and retaining the same SMTP domain ( with native scripts ) -
Part I
Regards

Unable to reset or add new email addresses on HP Officejet Pro 8600 Premium e-All-in-one N911n

Unable to reset or add new email addresses on my HP Office jet J4680

Hi johndavis196,
Welcome to the HP Support forums. I see that you are trying to add new email addresses to your Officejet J4680 printer.
To better assist you, would you please provide some additional information:
How is the printer connected (USB cable, ethernet, or wireless)? The Officejet J4680 supports all three methods.
What operating system are you using on your computer (Windows 7, Mac 10.8, or Windows 8, etc)?
Where are you trying to update the email addresses?
Are you encountering any error messages? If yes, what is the error message and where is it displayed (printer or computer)?
What steps are you taking before you are stopped?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How do I change my icloud email display name?

HELP!
I cannot find anywhere how to change my ICLOUD email display name? Can anyone help please? I have tried my Apple ID, via my PC and also via my iphone to no avail....HELP please it is v frustrating!

Thanks Allan. Slight problem, I changed my email address on my Apple ID and now I can't get into my Icloud settings on my iphone. Can I do it on my laptop or via icloud.com or appleid perhaps?
Thanks for your hep

Change name of AD site hosting Exchange 2010 server

We want to change the name of an AD site which currently hosts an Exchange 2010 server. Is this possible? Are there specific steps we need to follow to keep Exchange up & running?
Thanks

Hi Sneaky,
As Vincez mentioned, it is possible to change the name of the AD site with Exchange 2010 is hosted,you just need to restart the AD topology service after changing.
You can also refer to the following threads:
Changing AD Site name in Exchange 2010
SiteName is hard-coded
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Renew SSL Certificate for for two Exchange 2010 Server and the new rules.

I find DigitCert's website always helpful with cert questions.They've got a pretty helpful page here: https://www.digicert.com/internal-names.htmIt looks like they've got a tool for Exchange, but I've not used it myself, so can't say if it works or how well: https://www.digicert.com/internal-domain-name-tool.htmI bet Microsoft have something on their website too that helps with this sort of question.I'd say you register a completely new domain and use that for public facing and internal servers. Or you could just create a sub domain of an existing one, i.e. subdomain.mydomain.com and use that, i.e. public_exchange.subdomain.mydomain.com and internal_exchange.subdomain.mydomain.com.

Hi there ,
My exchange 2010 Server Certificate is about to expire and i am going to renew it but according to the new rules for SSL Certificate Issuing we can not include our Local Servers Names and Local FQDN such as myserver.contoso.local, my issue is that i have 2 exchange servers one is internet-facing Server (where the certificate is initiated and installed) and one is non-internet-facing Exchange server.
if i am going to renew my certificate with public only name, I have to create a split Domain that reflects my external links to the internal Users, what shall i do for the non-internet-facing server? do i need to create another record in my split DNS Server and add it to my Certificate Request ?
This topic first appeared in the Spiceworks Community

Outlook 2013 client, not in domain, can't connect to the Exchange 2010 server

Good Aftermoon,
Having issues it seems getting to the right forum but here is what I have. Currently we are running an Exchange 2010 server. OWA is configured and I am not having any issues with people connecting through it. The issue I am having is that any user that tries
to connect through Outlook 2013 gets an error message about the proxy server and then a certificate error. I have run the tests through the toolbox and get the following results.
Attempting to test potential Autodiscover URL https://autodiscover.westmoreland-county.org:443/Autodiscover/Autodiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Elapsed Time: 694 ms.
Test Steps
Attempting to resolve the host name autodiscover.westmoreland-county.org in DNS.
The host name resolved successfully.
Additional Details
IP addresses returned: 69.89.25.150
Elapsed Time: 284 ms.
Testing TCP port 443 on host autodiscover.westmoreland-county.org to ensure it's listening and open.
The port was opened successfully.
Additional Details
Elapsed Time: 164 ms.
Testing the SSL certificate to make sure it's valid.
The SSL certificate failed one or more certificate validation checks.
Additional Details
Elapsed Time: 245 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover.westmoreland-county.org on port 443.
The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
Additional Details
Remote Certificate Subject: CN=*.bluehost.com, OU=PositiveSSL Wildcard, OU=Domain Control Validated, Issuer: CN=PositiveSSL CA 2, O=COMODO CA Limited, L=Salford, S=Greater Manchester, C=GB.
Elapsed Time: 201 ms.
Validating the certificate name.
Certificate name validation failed.
<label for="testSelectWizard_ctl12_ctl06_ctl00_ctl00_ctl01_ctl02_ctl01_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
Host name autodiscover.westmoreland-county.org doesn't match any name found on the server certificate CN=*.bluehost.com, OU=PositiveSSL Wildcard, OU=Domain Control Validated.
Elapsed Time: 1 ms.
Attempting to contact the Autodiscover service using the HTTP redirect method.
The attempt to contact Autodiscover using the HTTP Redirect method failed.
Additional Details
Elapsed Time: 234 ms.
Test Steps
Attempting to resolve the host name autodiscover.westmoreland-county.org in DNS.
The host name resolved successfully.
Additional Details
IP addresses returned: 69.89.25.150
Elapsed Time: 14 ms.
Testing TCP port 80 on host autodiscover.westmoreland-county.org to ensure it's listening and open.
The port was opened successfully.
Additional Details
Elapsed Time: 83 ms.
The Microsoft Connectivity Analyzer is checking the host autodiscover.westmoreland-county.org for an HTTP redirect to the Autodiscover service.
The Microsoft Connectivity Analyzer failed to get an HTTP redirect response for Autodiscover.
Additional Details
The URL specified in the location HTTP header was not HTTPS. URL: http://autodiscover.bluehost.com/Autodiscover/Autodiscover.xml
HTTP Response Headers:
Keep-Alive: timeout=10, max=500
Connection: Keep-Alive
Content-Length: 356
Content-Type: text/html; charset=iso-8859-1
Date: Wed, 03 Dec 2014 18:10:08 GMT
Location: http://autodiscover.bluehost.com/Autodiscover/Autodiscover.xml
Server: Apache
Elapsed Time: 135 ms.
Our setup currently our domain is being hosted and the web master has control of domain settings.
I am fairly new to the Excchange Server world so any suggestions that you may have as to how I can resolve this would be great.
Bill

Hi Bill
Thank you for your pos.
You can use the following command to check whether you have purchased the certificate of audiscovery.westmoreload-country.org in your organization:
Get-ExchangeCertificate –server CASServerName | fl
For example: you want to return all certificates stored on the Client Access server named ClientAccess01, you will type the follow command in EMS.
Get-ExchangeCertificate -Server ClientAccess01 | fl
If you didn’t purchased the certificate of audiscovery.westmoreload-country.org, you could contact your certificate supplier.
You could refer to the following link:
https://support.microsoft.com/kb/940726?wa=wsignin1.0
If there are any questions regarding this issue, please be free to let me know.
Best regard,
Jim

Attempting to add new email account to Messages - not receiving confirmation email

I am attempting to add a new email accoutn to my iMessages "You can be reached for messages at". It adds, and says that it has sent a confirmation email, but the email never arrives.
It doesn not end up in Junk, and it is not being caught my my mail server's SPAM filter - I whitelisted apple.com/me.com/icloud.com just in case.
This has been going on for months - any ideas?

HI,
So this is an Apple ID issued by iCloud that end either @me.com or @icloud.com
I also take it that this account/email/Apple ID has been Verified on the Apple ID web site ?
It seems it was possible to convert a MobileMe @me.com email/ID into an iCloud one without going through a verification process.
This is turn maybe because of having an @mac.com name form the .Mac service days that was linked to a MobileMe ID at the MobileMe/.Mac service change over.
If on the other hand you have an @me.com Apple ID from the MobileMe era but have not linked it to an iCloud "registration" it is possible it works and an Apple ID but not as an email (although your post seems to suggest you are using a valid email.)
There have been cases where the Apple ID in questions works as an email, as a Login here to post, an iTunes ID and allows access to the App store but will not work in Messages of FaceTime.
This group seems to be subdivided in to two sub groups:-
1) Those that get a pop up alert from Messages saying "Contact Support"
2) Those that see nothing. (this seems to be a newer response from the app)
I would go to the Apple ID site and follow the Manage ID options.
If everything appears to be in order there I would use iTunes and the Help > Support item at the bottom of the iTunes Store page and follow the links to Contact and Manage account until you get the email link.
8:11 PM Friday; June 21, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Need more options to add new email address

Most of my setup works perfectly.
However, one of my email accounts requireds the [email protected] as a username for login rather than simply name. The result is that I get the error: "Unable to connect to the server. Please try again later." when I try to add the email account.
The workaround I use at the moment is to use an incorrect domain.com part for the original email address. The setup process then allows me to enter the mail server names and ports specifically. I can now receive pushed email on my phone.
However, when I try to send email from that account, the mail is rejected by the mail server since the "from" email address doesn't exist (since the domain.com I used is invalid.)
I REALLY would like to be able to specify all settings manually right from the start of the setup process in an "advanced setup" step. Give me the control to enter what I want, and leave the simple automatic works-most-of-the-time-for-most-people approach for those who don't need to flexibility.
Solved!
Go to Solution.

I enter in my correct details on the "add new account" page. I get the same error "Could not connet. Please try later". Then enter this address into the browser https://email.nokia.com/account/addEmailMoreInfoNoCorpSupport.action
(note, the first part of this link should be the same as the address in the bar BEFORE you type this. If your address doesn't start with email.nokia.com then replace that with whatever you have)
This takes you to the manual settings screen where you can enter all the settings, but with the correct email address in the annoying read-only field!
Dear Nokia - can this have been so hard to allow in the first place?
Message Edited by dazz19 on 29-Aug-2009 08:44 AM

Change/Add new email domain name to my exchange 2010 server

Similar Messages

Maybe you are looking for