Change all received messages text body colour to black

Hi All,
We have a user that is Colour blind and has trouble seeing Blue. Can you please advise if these is any what to change outlook so that all messages are received as Black text please see example below
Usually reply comes in like this
Would like to change it so the text is black like below

Hi,
For HTML and RTF format, the Stationery and Fonts option mentioned above by <Clark Kent> will only apply to the messages that you send out (New mail messages and Replies and Forwards).
Plain text message is a different thing, you can change the font for both incoming and outcoming messages in
Stationery and Fonts option.
So you just cannot easily control the font of HTML and RTF incoming messages, as they arrive with the font already set by the sender. You can choose to read all mail as plain text (File>Options>Trust Center>Trust Center Settings...>E-mail
Security), then change the font in Stationery and Fonts dialog for plain text messages:
Thanks,
Ethan Hua CHN
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Similar Messages

Update (0 new / 0 changed) Warning received Message Missing Update Finished

The FULL load is running for long time and after some time it fails with processing Overdue. ( It is loading directly into datatargets no PSA as this is Daily FULL load to cube, deleting the previous request) The job overview is successfully finished in source system.
While load running in details tab under processing..
1)Data Package 6 ( 7407 Records ) : Missing messages -->
2)Update ( 0 new / 0 changed ) : Warning received
3)Message Missing: Update Finished for Cube
4)Processing end : Missing messages .
When clicked on helpnode on each step:-
1)Data Package
A data packet is either sent with transfer method IDoc or PSA to BI. You have the option here of viewing the data received and of editing it where necessary, of posting the data packet in simulation, and of canceling in simulation, and, if it has not yet been posted successfully, of starting the update manually.
2)Update
See also Data packet processing steps
By this the persistent saving of data is understood in its final target object
3)Processing Message
see also Data Packet Processing Steps
Single message from the processing of a data packet. Some messages contain references to application logs or other requests. The monitor then allows corresponding jumps.
4)Processing End
see also Data packet processing steps
If the processing of a data packet has been finished then any error messages for each process in the step up until this point are delivered to the monitor and to the called program (in the case of transferring by IDoc thus to the IDoc management). If no errors arose then a success message is logged per process.
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.

Hi
Try to transport the request again and check...
Perform the consistency test with 'RSRV'...
Check notes in this link if they could help u....UNCAUGHT_EXCEPTION
Regards
Gaurav

How to make it a default for all received messages to not preview the attachment but instead show the icon? (mac mail.app)

Hi
I am having trouble with large incoming mail attachments.
When I receive a large attachment (pDf) the useful mail preview feature attempts to show a preview of the attachment. Unfortunately this is causing a lot of trouble as some PDFs are extremely large and therefore take time to open/preview. If I right click the attachment and select view as icon, the problem with that specific message ceases as the attachment is no longer previewed.
How can I make it the default for all attachments in received messages to only be shown as a icon and not previewed?

In Terminal,
defaults write com.apple.mail DisableInlineAttachmentViewing -bool Yes

Libreoffice not showing all the message texts in menus

Hi,
I use libreoffice Build-ID: 4.2.5.2 Arch Linux build-1 on my laptop and a week ago i noticed that a lot of the text in the menus is not displayed anymore. Also any mouse over texts are empty.
I tried to install some true type fonts but this did not help. Then I installed some more localization packages but this did not help either. What could be the reason for this defect?

What version of libreoffice were you using back when the menu text worked? If it's the same version, maybe an Xorg or Cairo update broke it. Accelerated text sometimes has issues and you can test that by putting
Section "Device"
Option "ExaNoComposite" "true"
EndSection
in an xorg.conf.

How do I set up an auto reply for all received messages during dates that I am not using email?

I want an auto reply to go to all senders of email during dates that I will not be able to access email. I want to customize this reply.

https://support.mozilla.org/en-US/kb/vacation-response

Changed toners, received a message 10.0002 supply error

HP color Laserjet 2600n
changed toners, received message 10.0002 supply error
What is the problem???

Hi
This indicated an issue with the magenta toner, the printer cannot read the chip on the toner. So check the orange toner and make sure you removed the orange clip that is protecting the chip. If its allready of then clean the chip contacts and reinsert it in the unit.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Changing All Blue text to Red?

Is there a way to change all of my text that is in one color (lets say Blue) to a different color (lets say Red)?
Thanks

If iMac therefore is happy, I am happy, but personally I cannot make it work with styles.
James Wilson7 wrote:
If you don't know applescript:
Select some of the blue text. Create a new character style called 'blue'.
Select any small bit of text. Color it red. Create a new character style called 'red'.
go back to the blue text and select any small bit. In the style drawer select all uses of 'blue'.
All blue text will be highlighted.
This does not happen for me, and I cannot see how it could happen. I must be missing something.
Let's assume that I have the text "one two three" with "one" and "three" in blue, and "two" in black.
I highlight "one" and define a character style "BLUE" from it.
When I then choose "Select all uses of BLUE", the word "three" is not selected, and I do not think it should be either.
James Wilson7 wrote:
Then simply select the new character style 'red'.
There may be problems here if you initially had blue text in several different styles. Selecting the new character style, you may overwrite other properties, unless you take care when you define the style.
Am I missing something here?

Keeping my Font choices in Message text??

My 30" monitor has such a high resolution that everything appears almost half the size of a printout (for example, 12 pt fonts appear on the monitor screen almost half their real size). Since my eyes are not quite what they used to be, I choose a large message font, as well as large fonts for all other font options in the preferences.
That works for a good many messages, the texts of which are displayed in my chosen font. But some messages like yahoo discussion groups for one example, are displayed in an extremely tiny font that I cannot read.
1) How can I make MAIL display all messages in my chosen message font?
2) if MAIL cannot do that, what email applications can?
Also, some explanation of what is going on would be welcome.
Thanks,
Mark

Hello Mark.
When receiving a message with a small font that isn't your chosen font indicates the message was composed in HTML.
Copied from this link.
http://www.birdhouse.org/etc/evilmail.html
Because it introduces accessibility problems. When you write in plain text, the receiving mail client renders the text in whatever font the reader chooses. When you format email with HTML, the sender controls the formatting. But this is a trap: You only think your message will render the same way to the viewer as it appears to the sender. In reality, the receiver can end up squinting because the font looks so tiny, or vice versa. HTML is not rendered the same way from one viewing client to the next - all guarantee of accessiblity goes out the window. This is especially problematic for visually impaired persons.
There is a way to force the Mail.app to change text formatted in HTML by the sender to Plain Text for all received messages.
You can also do the following when such a message is recieved.
With the message open, at the menu bar go to View > Message and select Plain Text.

Message text in sequence diagrams not displaying in editor

I split a large sequence diagram into smaller parts so that the parts could be included as graphics in a user manual.
Here is how I split the diagram:
1) Create the single large diagram. Name the diagram "SD".
2) This diagram produces an SD_etlp and an SD_etld file.
2) Copy these two files to different names. Eg SD_etlp_01 and SD_etld_01.
2) Delete 10 messages from the bottom of the original diagram. Save.
3) Copy the two files to SD_etlp_02 and SD_etld_02.
And so on.
So the diagram editor only sees the original file name. But this file is actually getting smaller and smaller. I can re-edit any of the saved files by changing their name back to the original file name as seen by the diagram editor.
I produced about 10 smaller sequence diagrams without problem.
On the latest sequence diagram in the editor, I lost all the message text. Everything else was fine. (I think I shortened the lifelines too much so they encroached on the actual messages. Note that I do not shorten lifelines in the editor, because these changes are not persistent. I edit the lifeline heights in the ETLP file.)
Losing the message text should not have been a problem. Because I thought that all I had to do was return to one of the earlier diagrams and start again.
However, on returning to all the previous saved diagrams, all the message text had disappeared from those diagrams as well. (I had already printed out those diagrams, so I haven't lost everything.)
When I open the ETLD files, I can see all the missing message text for each diagram, for example:
<name value="public void addNode( String Unnamed, String Unnamed )"/>
Can anyone tell me how to show these messages on the diagrams?

When I select "Show Message Numbers" , all text is displayed as "1:"
If I right-click on an individual message, "Show Message Name" is not checked. If I check it, it says "Unnamed".
I may have introduced a corruption as follows:
1) One message text disappeared. This may have been due to the excessive amount of manual dragging on large diagrams (see later).
2) I right-clicked on the message. Select "Show Message Name".
3) The text "Unnamed" was displayed.
( I now know that "Unnamed" will be displayed for any message, even when message text is displayed :)
4) I typed "public void logout( )"
5) This produced the correct text on the diagram.
Some effects of this were:
1) In the model, a message was added to the contents of "Messages", named "public void logout()". All the other messages are simply called "Message".
2) There is an entry in ".QueryCache" file:
nodeType_="Message" name="public void logout( )" id="DCE.14D184C9-7052-ECFE-D9E9-48CB83B1E357" fullName="public void logout( )"/><Name nodeType_="Lifeline" name="self" id="DCE.37BD6533-F0C0-FDF8-7391-521338CD4F86"
This is the only cache file entry that relates to messages.
If I can roll back the changes made by typing "public void logout( )", would that cure the problem?
1) As well as noticing that the message text is still in the ETLD file, I also see that, for each message:
<visible value="true"/>
I have been backing up matched pairs of ETLP and ETLD files which earlier produced good diagrams. If these files later produce a diagram in which the message text is missing, then there must be at least one other file that has been corrupted. Does anyone know what other files I should back up to produce a self-consistent set of files that can be used for recovery?
By the way, here is the reason that I am spending so much time trying to recover message text rather than simply regenerating the model. The diagram has 250 messages. The horizontal spacing between some objects is equal to 20 times the width of one object. This means that I have a lot of dragging to do. Each manual action increases the risk that some error will be made (and usually is). Even at 5% zoom, the diagram is several screens wide, so messages can be disappearing off-screen without my knowledge. Simply closing up the objects takes two days work, because there are several combined fragments boxes which must be handled very delicately, or message text disappears.

I have advised my icloud mail to NOT SAVE my sent messages. However, it continues to SAVE ALL SENT MESSAGES. How do I get it to stop saving them?

I want icloud to stop saving my SENT messages in my SENT folder. I have NOT checked the SENT folder - but it continues to save the sent messages. Alas, how to stop it?

The iTunes sync process does not include email account mailboxes and messages.
If the account is a POP account, all received messages tha remain on the server will be downloaded as new and unread messages. Messages in the account's Sent and Trash mailboxes will not be available since these mailboxes are not stored on the server with a POP account.
If the account is an IMAP account and you were storing the account's Sent and Deleted mailboxes on the server with the account settings on your iPhone, messages in all server stored mailboxes will be available again but must be re-downloaded which will occur when a server stored mailbox is selected.
Not sure why the apps in your iTunes library that were not selected under the Apps tab for your iPhone sync preferences with iTunes and were not on your iPhone were selected and transferred, but the apps can be removed by deselecting the apps under the Apps tab for your iPhone sync preferences with iTunes followed by a sync.

Change the color of text item after execute query

Dear friends
I would like to know how can I make a tabular form like grid and chang the color of text item when (for exp in emp table) the value of sal column between 2000$ and 4000$.
I used the SE_IEM_PROPERTY command but it change all of the text items of sal column.
please help me
thanks a lot

Highlight the Existing Record in Forms
(Compatible with 4.x, 5.x, 6.x & 9i)
Step 1: Create a New Visual Attribute(BLUE_VA) (Color of highlighted record)
          Font â Arial
          Size â 8
          Style â Plain
          Font width - Normal
          Font Weight - Bold
          Foreground Color â Black
          Background Color â Blue
          Fill Pattern â Transparent
Step 2: Create another Visual Attribute (WHITE_VA) (Default Color of the record)
          Font â Arial
          Size â 8
          Style â Plain
          Font width - Normal
          Font Weight - Bold
Foreground Color â Black
          Background Color â White
          Fill Pattern â Transparent
Step 3: Add Following code to Block-level Trigger WHEN-NEW-RECORD- INSTANCE, POST-BLOCK
(Add to the block, which has these records)
-- Following code will only highlight an item
DISPLAY_ITEM(<block_name>.<item_name>,'BLUE_VA');
-- Following code will highlight complete Record (ref: DISPLAY_ITEM example)
DECLARE
          cur_itm VARCHAR2(80);
          cur_block VARCHAR2(80) := :System.Cursor_Block;
BEGIN
cur_itm := Get_Block_Property( cur_block, FIRST_ITEM );
WHILE ( cur_itm IS NOT NULL ) LOOP
cur_itm := cur_block||'.'||cur_itm;
Display_Item( cur_itm, 'BLUE_VA');
cur_itm := Get_Item_Property( cur_itm, NEXTITEM );
END LOOP;
END;
Step 4: Add Following code to Block-level Trigger PRE-RECORD, PRE-BLOCK
(Add to the block, which has these records)
-- Following code will only highlight an item
DISPLAY_ITEM(<block_name>.<item_name>,'WHITE_VA');
-- Following code will highlight complete Record (ref: DISPLAY_ITEM example)
DECLARE
          cur_itm VARCHAR2(80);
          cur_block VARCHAR2(80) := :System.Cursor_Block;
BEGIN
cur_itm := Get_Block_Property( cur_block, FIRST_ITEM );
WHILE ( cur_itm IS NOT NULL ) LOOP
cur_itm := cur_block||'.'||cur_itm;
Display_Item( cur_itm, 'WHITE_VA');
cur_itm := Get_Item_Property( cur_itm, NEXTITEM );
END LOOP;
END;
I am using the above code in one of my forms and I so far haven't seen any problem

My daughter pressed a pop up that her ipod touch now receives my texts/imessages because its using my cellphone number. I still get messages on mine too, but she is seeing all of mine. How do I change it?

My daughter pressed a pop up on her ipod touch that she is now receiving my texts/imessages meant for my iphone. I still receive my texts/messages, but she is receiving them as well. I believe somehow my phone number is now affiliated to her ipod touch. Please help!!!

On her iPod go to Settings>Messages>Send And Receive and delete your phone number and email address) if necessary)

TS2755 I cant receive longer text messages. Is there a setting I need to change?

I cant receive longer text messages. Is there a setting I need to change?

That is controlled by your carrier. The standard SMS is a max of 160 characters. There is no setting on the phone for SMS messages >160 characters. Not all carriers will support longer messages, and some will split them into multiple messages. Contact your carrier.

I no longer receive notification or sound or even a badge app icon when receiving a text message, I have not made any changed to my sounds

How do I fix this, I no longer receive notification or sound or even a badge app icon when receiving a text message, I have not made any changed to my sounds, I've checked all the settings and everything is good, I powered off the phone and restarted, I synced it and still nothing, can anyone help?

Settings app > Notification Center > Messages (you will need to check both the INCLUDE and DO NOT INCLUDE sections). Set the alerts you wish to see.

TS2755 My husband and I have a linked apple account and i cloud. Now he is receiving all of my text messages. How can I fix it to where he only receives his messages and not mine? Any help is appreciated!

My husband and I both have iphones and both are linked to the app store and i cloud. Now my husband is receiving all of my text messages and has all my contacts. How can we get it to where he does not receive my messages anymore? Any help is appreciated!

Best way is to get your own Apple ID, but until then have him go to Settings > Message > Receive at and remove your phone number.

Change all received messages text body colour to black

Similar Messages

Maybe you are looking for