Change all slide's value

Hi every body,
I need some help today for one problem about slide - sub vi and property node.
I would like to change all slide value with a sub vi
Any ideas ?
Thanks
Solved!
Go to Solution.

Hi,
Using of property node u can change the value of Slide.
Siva
Sivaraj M.S
CLD
Attachments:
main.vi ‏7 KB
Sub.vi ‏8 KB

Similar Messages

Change all slides' display time en masse

Greetings,
Cp 5.5
I've recoreded a training and assessment simulation where the slides' timing is set to 3 sec. Post-production: I want to change ALL of the slides' timing to 2 sec.
I realize I should have done this in the Global Prefs Default prior to recording. Going in to the Prefs and trying to change the Slide Duration post-production does not work.
Is there a way to do this without having to change each slide individually?
Much Thanks!
k

No, I do not know about such a work flow, and also think it would probably cause a lot of issues. If you have interactive objects, changing the slide duration will change the active/inactive parts, if you have Effects the duration will be changed relatively, if you have audio, it will be cut off etc...
Is there a particular reason why you want to do this? Perhaps to decrease a little bit the filesize? Most object default timeline will probably also be 3secs, to decrease the slide duration you'll first have to decrease the object timelines or to attach them to the end of the slide (CTRL-E). If there is no real staggering in objects this will be the fastest way (but still slide/slide:
look for an object of each style/type, and set its timeline to 2sec, than you can use the small curved arrow in the top right of the Timing accordion to apply to all objects of that style/type
then slide/slide select the slide timeline and use the shortcut SHIFT-CTRL-LEFT to decrease the length with 1sec
Lilybiri

Changing colors on all slides

I have a presentation with 84 slides. My text is white. I want to change all slides to black text with a white background. What's the quickest way to do this short of manually changing each slide separately?

You should be able to change the slide master(s) to get the appearance you want. In the View menu, select "Show Master Slides". When you click on one of the masters, you can edit it, and any slide that has that as its master will be changed. So, you can change a master's background to white, and change the text on it to black, and all slides using that master will have white backgrounds with black text.
Note that the text on slides will only be changed if that text was typed into the default text box of the slide (in other words, if it used the master's text box). If the text was added as a separate object, you'll have to change that text by hand.
PowerMac G5 Mac OS X (10.4.4)

Can I "BATCH"/"Change All" Values of an Event Type in Logic 8

NOTE: This is my first leap into Logic, so please be gentle and tolerant of my lack of knowledge. I have been using Garageband since v1 and am know on '09 with all the Jam Packs.
I recently got Logic 8 for my G5 Quad to edit MIDI Files (mostly commercially produced files) and refine my GB projects.
Sometimes the MIDI programmers use variable volume (Control 7) instead of expression (control 11) to add swells to instruments, which makes it difficult to balance the instrument levels in logic/garageband as software instruments do not have the same level balance a standard MIDI values.
I can manually edit each volume event and change it to expression, but this is very time consuming, especially for instruments like a pedal steel that may have thousands of volume events in the track.
What I am hoping is that I can select a range of events between bars (highlighting everything in the range) and be able to change only the Control 7 events to Control 11 events without changing any other type of event.
Is this possible in Logic 8? If not, might there be another utility that I can use that will do this?
I suppose, if no other option is available, I could adjust the generator's volume, but that isn't as convenient or interactive as being able to use track volume to set a master level and use expression to control swells.
Any help or suggestions would be greatly appreciated.
TIA

Brilliant!!
How did you find the command? It is NOT listed in the Keyboard commands.
Also, would you know how to change the velocities in a similar fashion? i.e. A guitar track may have velocities exceeding 120, which with the Steel String Acoustic Guitar, results in a slide to the target note. I would like to change ALL velocities over 120 to 115, or reduce values over 120 by 8 to reduce them below 120.
The find similar/exact seems to go after the note values and does not consider velocity.
Many years ago, I used a PC app called Power Tracks (part of Band-in-the-Box suite) and I could define a range of values and reduce them by amount or percentage. Very light weight (resource wise), but extremely power app.
TIA

How to response the value change of slide bar only after mouse released

Hi, all
When I used the slide bar to control my device, I response the value change of slide bar and set the new value to my device. But it will generate response constantly when I use the mouse to drag the pointer, which is not my wanted. I just need to response only after the mouse released. How can I implement this function?
Hope your suggestion, thanks a lot.
Solved!
Go to Solution.

No, not if you use the right event under "Mouse".
“A child of five could understand this. Send someone to fetch a child of five.”
― Groucho Marx

All default routing value has to be changed, while changed the work center in production order

Dear friends,
our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routing.At present we have to enter the manually change the W.C as well as set up time and operation time enter manually.Any other option to do the automatically capture value from routing while change in Work center in production order.pl help me on this.
Thanks&Regards
Sabhapathy R

Hi Rahul,
Thanks for reply. I am maintained in diff value maintained routing , Ex :First routing i have work center 'X' value maintained as a setup time in 15 Min's and operation time 10 Min's
second work center 'Y' I have maintained as set up time 10 Min's and operation time 30 Min's,
Now I want to change the work center in production order as a 'Y' so whatever value maintained in routing , it has to be changed automatically (10 min's and 30 Min's), but system will not change only old value only picked (15Min's AND 10 Min's).
Now I think you get to know what the client requirement, kindly do the need full.
Regards,
Sabhapathy R

How can I change all Inf elements in an array to a specific value?

I would like to change all Inf elements in my array to -1. Basically, I am looking for something similar to the range and coerce function, except that I want all values above a certain value to be a specific negative value, rather than go to that value.
I could use a case structure and go through each element in the array, but I am hoping to find something more efficient.Any ideas?
Solved!
Go to Solution.

P@Anand wrote:
I would do that in this way.
Here's a simpler version...
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Replace in Array.png ‏4 KB

Powershell script to change the a column value of all documents in a site.

Hi,
I need a powershell script to change the value of a column (a site column which has been added to all document libraries) in all documents in a site,
For example:
-column 1 is a site column added to all libraries
the value of column 1 of all documents under this site: http://intranet.doman/ex1 should be equal to V1
the value of column 1 of all documents under this site: http://intranet.doman/ex2 should be equal to V2
So, if I can write a powershell script to change the value of all documents in a site, I can modify it for different site that I have and run it for each of them individually,

cls
# Is dev version?
$dev = $false
# Configuration
$termStore = "Managed Metadata Service"
$group = "G1"
$subjectMatterTermSetName = "Subject Matter"
# Check if SharePoint Snapin is loaded
if((Get-PSSnapin | Where {$_.Name -eq "Microsoft.SharePoint.PowerShell"}) -eq $null) {
Add-PSSnapin Microsoft.SharePoint.PowerShell
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Taxonomy") | Out-Null
function GetTermStore($site, $termStore, $group, $termSet) {
$session = New-Object Microsoft.SharePoint.Taxonomy.TaxonomySession($site)
$termStore = $session.TermStores[$termStore]
$group = $termStore.Groups[$group]
$termSet = $group.TermSets[$termSet]
return $termSet
if($dev) {
Write-Host "Running DEV version..."
$webUrl = "http://Site1"
$libraryName = "L1"
$subjectMatter = "C1"
} else {
$webUrl = Read-Host "Enter Site URL"
$libraryName = Read-Host "Enter Document Library name"
$subjectMatter = Read-Host "Enter Subject Matter"
try {
$web = Get-SPWeb $webUrl
$site = $web.Site
$library = $web.Lists[$libraryName]
$items = $library.GetItems()
$subjectMatterTermSet = GetTermStore $site $termStore $group $subjectMatterTermSetName
$subjectMatterTerm = $subjectMatterTermSet.GetTerms($subjectMatter,$true) | select -First 1
foreach($item in $items) {
if([string]::IsNullOrEmpty($item["Subject Matter"])) {
#Write-Host "Filename: $filename / Keywords: $keywords / Subject Matter: $subjectMatter / Document Type: $documentType"
Write-Host "Updating $($item["ows_FileLeafRef"])..."
# Set Subject Matter column
$subjectMatterField = [Microsoft.SharePoint.Taxonomy.TaxonomyField]$item.Fields["Subject Matter"]
$subjectMatterField.SetFieldValue($item,$subjectMatterTerm)
# Update Item
$item.SystemUpdate()
catch
$ErrorMessage = $_.Exception.Message
Write-Host "Something went wrong. Error: $ErrorMessage" -ForegroundColor Red

Changing 'All Column Values' in dashboard prompt

In OBIEE 11g, how to modify the dashboard prompt All label value? I do not want to change value in XML file , because it will impact all dashboard prompt value.
Is it there better method to implement this problem?
For example:
In dashboard prompt-->edit -->options--->tick 'Include "All Column Values" choice in the list', so I can view '(All Column Values)' value in prompt. Customers want to changed this value,such as 'all values'. Is it possible? Thanks.

Hi,
Can do it using Union All is prompt SQL and presentation variable in report.
Refer : http://www.varanasisaichand.com/2010/01/editing-all-choices-in-dashboard.html
Regards,
Srikanth

Changing fonts in all slides, Changing fonts in all slides

Hello, I have 80 slides I'd like to change the font in all slides to a simpler font. I'm using chalkduster font on iPad, how can I change it? Can I make 1 change or must I go through every slide?

Did you solve this font issue with Keynote? I just finished a huge presentation, uploaded it to the cloud and now realize the font I used on my iMac is NOT on keynote...go figure! So, now all the capitalization is screwy and inconsistent. don't want to recreate all fonts box by box.

Is there no way to update the "Default Lables" on all slides once I've changed it under the Preferences?

Is there no way to update the "Default Lables" on all slides once I've changed it under the Preferences?
I really don't want to recreate the slides from scratch again.

What about File, Export, Text Captions...? You'll have a Word document with two columns. Translate the second column (much easier in Word) and import again. That is the normal work flow for translation. Same is possible with XML instead of Word.

My iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens

my iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens

Hi Goofy Goat,
Welcome to the Apple Support Communities!
It sounds like you have done some great troubleshooting for your iPod nano that is not responding. In this situation, if resetting it did not resolve, I would suggest restoring the iPod back to its factory settings and then sync your content back onto it from iTunes. Please use the following article as a resource for restoring.
Restoring iPod to factory settings
http://support.apple.com/kb/HT1339
Have a great day,
Joe

Labour activity change all activities value should be change

HI PP Guru,
i getting problem in activities type. i have 6 activities type in on work center. our client requirement is when he will do the confirmation. he will change the value of labour activity.and same time other 5 activities value should be change according to labour value change
i have define formula
1st i have taken value from operation qty in labour
formula for labour : labour qty * operation qty / base qty
and other formula for 5 activities
X * labour qty / base qty...........where X is activities type
kindly suggest me woh it will be effect others activities value when labour value qty change at the time of confirmation
regards
Aqueel

Dear ,
Did you assing any Activity Type in Work Centre -Costing tab ?? What is SAP Standard Vaule are you using in CR02-Work centre ?? Do you have only labour activity which can be the only Standard Value key ??
Your labour activity values can change based on actual work but you can not change the Activity type at Confiramtion level .Activity Type can be control either from Work Centre or you can choose at routing operation if they are not assinged in Work centre .
I think you have total six activity type ( as per KP26) for same work centre and it depends on the Labour activity .It means , you will not use any pre-determined activity type in costing Tab -CR02 -Work centre but have six formula key .
As far as I know , you have the option at routing level to choose the Acitvity type in CA02-Hit on operation details -Double Click -Stabdard Value Tab -Choose the Activity Type but all this activity type should be under same Cost elements and Cost centre based on the KP26 ( Allocation of cost element ) .
In our case , we have only labour activity based on skill .So we have group of skilled labour with certain activity type /Formula key and they are identifed as one Work Center .Like wise we have a set of 7 kind of skilled labout group and they are individaul work centre .We do not assing any activity type in work centre .Either we slecet/change at routing level and then carry Read PP master data before GMPS , CNF of order .This is basically based various activity type .
But in your case , is it Labour hrs getting changes than actual plan ??
Just explain your Work centre , Standard Values and Activity Type so that forum can also put their comments.
Regards
JH

AI CS3 Color Palette CMYK: I manually change C, and MYK values automatically change. WHY?

As I was searching the Adobe forums and Google for a resolution to this problem, the problem STOPPED. I am absolutely baffled, because I didn't change anything! Still curious to know what was going on:
I'm creating color swatches to print on a high-quality printer (digital process) so I have about 200 color blocks on a page.
I have been manually entering CMYK builds in different ranges, for example:
32/0/68/0
32/0/70/0
32/0/74/0
So that I can print them out and match the color, like a Pantone swatchbook, only in CMYK full-color/process printing.
After doing this for a few days, all of a sudden I went to change a square of color to a different color. I changed the CYAN value to something else (by typing a number in via my keyboard, rather than the slider), and when I tabbed to the MAGENTA field, all the other values automatically changed to drastically different numbers.
I tried manually changing the MAGENTA, and it would alter the CY&K. I tried manually changing the YELLOW, and it would alter the CM&K. In fact, it would not allow me to type in the exact build I wanted to. Strangely though, I was able to drag the sliders and that didn't alter the other values.
I have no idea why this happened, or how it resolved itself. I had even quit out of Illustrator and re-opened the document and the problem persisted.
Does anyone know about a setting - maybe I indavertently pressed a keyboard command without realizing it?
I'm working in:
Adobe Illustrator CS3, .AI file in CMYK color settings with Proof Colors turned ON (and "Simulate Paper Color" turned ON)
Color Settings: U.S. Web Coated SWOP v.2 (and "Preserve CMYK Numbers" box checked)
MacBook Pro Core i7
Mac OSX 10.6.3 (Snow Leopard, I think)

If you do a variety as you describe it does require some work and diligence.
You should set up two different color settings and if you use the bridge change them globally throughout the suite through the bridge.
Edit>Creative Suites Color Settings
One setting for Web and Print (Press) and the other for Photograhy and Print (Press)
The CMYK should be the same in both either Adobe RGB 1998 or Adobe Pro Photo RGB or Color Match RGB.
Then select the one for the type of project you are working for for print it could be either on since you would work in cmyk.
For web the web setting of course which should be sRGB. You have to make different copies of the files for web then for print as the color has to be adjusted for each.
And use the right one for each as well. You should check the profile each image as well and make them match for each type of document, it is not just good enough to have your settings correct does little good if an embedded profile is a mismatch, you want to do the adjustment your self and do any adjustments required.
In other words color management is work.

Crystal Report not Adopting all possible Dropdown Values from BEx Variable

Hi all,
I am having an issue in a Crystal report where the drop down parameter that is sourced from a BEx query variable does not include all the possible values in the cube (or in master data). After learning my lesson the first time of not changing the name of the variable or changing it to dynamic (this causes it to break), I had the understanding that the value list may not be complete when running the report in the Crystal client or in the viewer, however, I thought it should be correct when published to the BOE and run in infoview. I am getting the same incomplete list in infoview. I published the report into infoview using the Crystal 2008 desktop client, not the /CRYSTAL/RPTADMIN transaction.
I know there are a couple ways of sourcing a Crystal report from a BW query - using MDX vs. not, etc. I created this report using the SAP menu > "Create new report from a query". I don't believe Crystal will easily let you use that menu option to create a report off two BW queries joined together (which is what I am doing), so I built it off one originally (using the SAP menu), then added the other later on. I have the checkbox for "Use MDX driver with support for Multiple structures" checked. In database expert, my "Selected Tables" both are of database type "SAP BW Query".
Do I have the right understanding of how the value list should work when sourced from a BEx variable? If so, can anyone offer any suggestions for getting the value list populated correctly?
Here's some info:
Crystal version: CR2008, version 12.2.4.507
BOE version 3.1
SAP BW 7.01 EhP 6
Thanks,
Chad

Hi,
- in the Crystal Reports designer the list of values is not online and there is a maximum number of values - configured by a registry setting:
(windows 7)
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Business Objects\Suite 12.0\SAP\BWQueryReportWrapper
Key: MaxPickListSize
and correct you can not change the name of the variable or set it to dynamic as the definition is based on the BEx query.
I know there are a couple ways of sourcing a Crystal report from a BW query - using MDX vs. not, etc. I created this report using the SAP menu > "Create new report from a query". I don't believe Crystal will easily let you use that menu option to create a report off two BW queries joined together (which is what I am doing), so I built it off one originally (using the SAP menu), then added the other later on. I have the checkbox for "Use MDX driver with support for Multiple structures" checked. In database expert, my "Selected Tables" both are of database type "SAP BW Query".
The checkbox on the Multi Structure is not for the option to combine 2 Bex queries - it is for Bex queries with 2 structures and the BW query driver has been deprecated already and you have to use the MDX Driver.
Do I have the right understanding of how the value list should work when sourced from a BEx variable? If so, can anyone offer any suggestions for getting the value list populated correctly?
in Crystal Reports Designer the list is static and when you publish the report using the BW Publishing to your SAP BusinessObjects Enterprise system the list becomes dynamic in InfoView.
regards
Ingo Hilgefort

Change all slide's value

Similar Messages

Maybe you are looking for